* Add VnicProfileMapping to register VM
Add vnic profile mappings to be supported in vm registration
* Add VnicProfileMapping to register template
Add vnic profile mappings to be supported in template registration
* Add reassign bad macs to register VM
Add reassign bad macs to be supported in vm registration.
* Add additional mappings params for VM registration
As part of the effort to support DR with oVirt
the "Register" operation is being added with a new mapping parameter
that describes the configuration of the registration.
The idea of supporting DR site to site in oVirt is to have 2 active
setups using storage replication between the primary setup and the
secondary setup.
Both setups will have active DCs, clusters, and hosts, although those
will not be identical.
The user can define a mapping which will be used to recover its setup.
Each mapping can be used to map any VM's attribute stored in the OVF
with its correlated entity.
For example, there could be a primary setup with a VM configured on cluster A.
We also keep an active secondary setup which only have cluster B.
Cluster B is compatible for that VM and in case of a DR scenario theoretically
the storage domain can be imported to the secondary setup and the use can
register the VM to cluster B.
In that case, we can automate the recovery process by defining a cluster mapping,
so once the entity will be registered its OVF will indicate it belongs to
cluster A but the mapping which will be sent will indicate that cluster B should
be valid for every thing that is configured on cluster A.
The engine should do the switch, and register the VM to cluster B in the secondary site.
Cluster mapping is just one example.
The following list describes the different mappings which were
introduced:
LUN mapping
Role mapping
Permissions mapping
Affinity group mapping
Affinity label mapping
Each mapping will be used for its specific OVF's data once the register operation
will take place in the engine.
* Add additional mappings params for Template registration
As part of the effort to support DR with oVirt
the "Register" operation is being added with a new mapping parameter
that describes the configuration of the registration.
The idea of supporting DR site to site in oVirt is to have 2 active
setups using storage replication between the primary setup and the
secondary setup.
Both setups will have active DCs, clusters, and hosts, although those
will not be identical.
The user can define a mapping which will be used to recover its setup.
Each mapping can be used to map any Template's attribute stored in the OVF
with its correlated entity.
For example, there could be a primary setup with a Template configured on cluster A.
We also keep an active secondary setup which only have cluster B.
Cluster B is compatible for that Template and in case of a DR scenario theoretically
the storage domain can be imported to the secondary setup and the use can
register the Template to cluster B.
In that case, we can automate the recovery process by defining a cluster mapping,
so once the entity will be registered its OVF will indicate it belongs to
cluster A but the mapping which will be sent will indicate that cluster B should
be valid for every thing that is configured on cluster A.
The engine should do the switch, and register the Template to cluster B in the
secondary site.
Cluster mapping is just one example.
The following list describes the different mappings which were
introduced:
Role mapping
Permissions mapping
Each mapping will be used for its specific OVF's data once the register operation
will take place in the engine.
* Add support for update OVF store
Add support for task of update OVF store in a storage domain.
* allow shells to have per host options, remote_tmp
added language to shell
removed module lang setting from general as plugins have it now
use get to avoid bad powershell plugin
more resilient tmp discovery, fall back to `pwd`
add shell to docs
fixed options for when frags are only options
added shell set ops in t_e and fixed option frags
normalize tmp dir usag4e
- pass tmpdir/tmp/temp options as env var to commands, making it default for tempfile
- adjusted ansiballz tmpdir
- default local tempfile usage to the configured local tmp
- set env temp in action
add options to powershell
shift temporary to internal envvar/params
ensure tempdir is set if we pass var
ensure basic and url use expected tempdir
ensure localhost uses local tmp
give /var/tmp priority, less perms issues
more consistent tempfile mgmt for ansiballz
made async_dir configurable
better action handling, allow for finally rm tmp
fixed tmp issue and no more tempdir in ballz
hostvarize world readable and admin users
always set shell tempdir
added comment to discourage use of exception/flow control
* Mostly revert expand_user as it's not quite working.
This was an additional feature anyhow.
Kept the use of pwd as a fallback but moved it to a second ssh
connection. This is not optimal but getting that to work in a single
ssh connection was part of the problem holding this up.
(cherry picked from commit 395b714120522f15e4c90a346f5e8e8d79213aca)
* fixed script and other action plugins
ensure tmpdir deletion
allow for connections that don't support new options (legacy, 3rd party)
fixed tests
When using the -c option, like "ansible-config -c ~/.ansible.cfg view"
with python 3, it fail with this error message:
ERROR! Unsupported configuration file extension for b'/home/misc/.ansible.cfg': .cfg
* port elb_classic_facts to boto3
update module to use AnsibleAWSModule
* Add RETURN docs for elb_classic_lb_facts
* Remove superfluous exception handling around connection
Fix exit_json call and RETURN docs
This fixes fact gathering of VMware guest machines with
older Linux Kernel versions. These older Kernels do not support /sys
filesystem which is used to gather virtualization related facts.
'dmidecode' is the safest option to find out virtualization related facts.
Fixes: #21573
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Cache tasks as they are queued instead of en masse
This also moves the task caching from the PlayIterator to the
StrategyBase class, where it makes more sense (and makes it easier
to not have to change the strategy class methods leading to an API
change).
Fixes#31673
* Cleaning up unit tests due to 502ca780
* Add validation for the next to last line of a module
* Fix last error code
* Reduce to a single conditional
* Fix conditionals
* Move the final warnings statement to main() in mysql_replication
oVirt modules support environment variables to be passed as
authentication details for connection. But ovirt_auth doesn't support
it. This patch add support for it.
Change cb1b705218 introduced the newline
parameter on network_cli plugin, but that was never introduced on cliconf.
This causes ios_user to break, since the newline value is never plumbed thru
to network_cli
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
* updates to azure_rm_sqlserver_facts
Currently the ManageIQ API does not support azure_tenant_id but
this is in the process of being fixed. This commit changes
the recently-committed parameter to allow for the upcoming change.
* Fix persistent command timeout handling
We were using play context timeout on ansible-connect to set
the persistent command timeout handler. Thus, we were ignoring
the persistent_command_timeout setting.
Moreover, even by changing that on ansible-connection, were again
overriding it on cliconf send_command, since in a same process we can
just set a single alarm and cliconf send_command alarm setup is executed
after ansible-connection alarm setup.
* Remove alarm setting on cliconf send_command
The alarm is set regardless before it is executed by ansible-connection.
Setting an alarm again, overrides/disables the previous ones as a single
process can just have a single alarm set.
* Move the setting of persistent command timeout to network_cli
We do also use ansible-connection for connection local, so if a
user provides a timeout via provider that would be ignored if we
set the value on ansible-connection.
Moving that logic to network_cli plugin constructor makes both
connections to work.
* Remove debug statements
* Set the persistent command timeout on task_executor
We can't set the timeout on ansible-connection nor network_cli,
otherwise tasks using provider timeout won't work.
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
This fix refactor vmware_host module to use PyVmomi.
Also, handle SSLVerifyFault exception to get hostsystem's certificate
thumbprint.
Fixes: #20819
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* aci_aep_to_domain: New module to bind AEP to domain
* Changes to bring in line with aci_domain
* Rename aep_domain to domain_dn, add types
* Fix pylint errors
The jira module uses ansible.module_utils.urls.fetch_url which will
attempt to get that value of the validate_certs parameter from the
module; if present it will honor it's value, otherwise it defaults
to True.
This patch adds that parameter to jira so that it can be specified
by the user and honored by ansible.module_utils.urls.fetch_url
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix broken import
* ansible.module_utils.ec2.HAS_BOTO is already used
* wait_timeout parameter: use 'int' type
* wait is always True there
* doc: use formatting function
* Update validate-modules arg_spec introspection to be faster, by only mocking the imports we explicitly list
* The use of types.MethodType in redhat_subscription wasn't py3 compatible, use partial instead
* Remove argument_spec import hacks, make them errors, we can ignore them with ansible-test
* Enable the --arg-spec flag for validate-modules
* aci_domain_to_vlan_pool: Add domain to VLAN pool
A new ACI module to bind a domain to a VLAN pool.
This module still needs integration tests once it is formally review and
accepted.
* Add examples to documentation
* aci_domain_to_encap_pool: Add domain to encap pool
A new ACI module to bind a domain to an encap pool.
This module still needs integration tests once it is formally review and
accepted.
* Fix domain RN and attributes
* aci_domain: Manage phys, vmm, l2ext, l3ext and FC domain profiles
A new ACI module from the high priority list.
* Add RHEV VMM provider as Redhat
* PEP compliancy
* Make variables specific to domain
* Add examples
* aci_vlan_pool_encap_block: New module to manage VLAN encap blocks
This module is a simplified version of the aci_encap_pool_range module.
* PEP8 fixes (closer to the original)
* Add integration tests
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
Adding "-SyncWindow 0" flag to the Compare-Object call used to determine if the existing and proposed IP address lists are the same. This makes the array comparison mark changes in order as a difference.
Fix for bug #34651
* aci_vlan_pool: Module to manage VLAN pools
This is a simplified version of the aci_encap_pool module.
* Add integration tests, based on aci_encap_pool
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
This module is mostly written to make room for the option of not
setting the `value` parameter while `state=absent`. That choice being
a feature, since it allows both for the removal of individual records
as well as the removal of full record sets.
The opposite goes for the `record` parameter, which needs to be defined
at least by its default value for the module to be able to produce any
meaningful result. Hence making it explicit as part of required_if.
The MX record type is already plenty covered. In addition to the
priority parameter having a default value, the `ensure_dns_record`
method does its own parameter checking.
SRV records on the other hand do need additional parameter
checking. Primarily with the `delete_dns_records` method in mind.
Fixes#23957
* filesystem: list used tools
* filesystem: btrfs and reiserfs don't support resizing
* filesystem: list supported filesystems
use formatting functions and 'filesystem' instead of 'file system'
* filesystem: PEP8
* filesystem: remove useless calls to module.boolean
* filesystem: fail when the requested action isn't implemented
* filesystem: resizefs: list supported FS rather than unsupported
* filesystem: refactor
* filesystem: add integration tests
* filesystem: allow to use image file with 'dev' param
* filesystem: test resizefs (ext2/3/4 filesystems only)
* filesystem: Btrfs, handle older version than v0.20-rc1
* filesystem: use loop keyword (integration tests)
* filesystem: new test, check when another filesystem already exists
* filesystem: add myself as a maintainer
* filesystem: fix tests as filters
* WIP Refactor EOS code to use cliconf
* Fix connection.get where sendonly is True
* Fix pylint issue
* Remove return from send_config and various exec_commands
Also, removed a few try/except, which are anyways handled in
Connection.
This adds a new module called 'vmware_host_config_facts' which
gathers facts about advanced configuration informantion about ESXi host or all
ESXi hosts from given cluster.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* converted win_updates to an action plugin for automatic reboots
* do not set final result when running under async
* Updated documentation around win_updates with async and become
_name attribute is used when providing generic error messages
(such as connection problems). As AnsibleAWSModule does not inherit
things from AnsibleModule by default, need to provide it.
* First pass at Terraform module
* Support output variables
* Support idempotent plan checks and external plan files
* Add check mode support
* Support custom statefile location & remove color-coding from shell output
* Docs
* Let missing statefile hard-fail
* Update to support present/planned/absent states
* PEP8
* Add docs & fix python 2.6 incompatibility
* PEP8
* PEP8
* Fix misleading cleanup/detach documentation
Current documentation is not concrete regarding desired
state of `detach` to make container be properly removed
with `cleanup`
Make `detach:false` be mentioned explicitly
* Tweak formatting
* eos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the eos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* nexos - Support use_proxy argument
Running ansible with a proxy set in the environment causes the nexos module to
attempt to connect to devices via the proxy.
To prevent this behaviour the only way is to unset the proxy out of the
environment, either by wrapping the ansible calls or doing it in a piece of code
executed before connect, such as a vars_module (though this is very hacky).
This change allows you to set `use_proxy: no` under the provider config.
The default value is set to True, which mirrors the behaviour seen today.
* adding azure_rm_postgresqlserver
* removed semicolon placed by mistake
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* updates to azure_rm_postgresqlserver
* Updated dependencies
* Allow protection of certain keys during camel_to_snake
Create an `ignore_list` parameter that preserves the case
of the contents of certain dictionaries. Most valuable
for `tags` but other uses might arise.
* Port ec2_vpc_route_table to boto3
Update tests to reflect fixes in boto3.
* Add RETURN documentation to ec2_vpc_route_table
* Update DOCUMENTATION to be valid yaml
* Add check mode tests
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* ios_logging: Handle IOS versions that dont put the word host in logging config
This change allows the ansible module to parse and match either variant
being present in running-config.
* ios_logging: enhance logging buffered to handle both size and level
This change allows ios_logging to ensure local (buffered) logging
is configured with both the correct buffer size and logging level,
when both are specified on the task.
* Add test for unexpected egress rule in default VPC
When passing rules_egress to ec2_group, the default
egress rule shouldn't be created (if `purge_rules_egress`)
is set. Test this.
* Respect egress rule defintions for default VPC groups
When passing rules_egress and purge_rules_egress, the
default egress rule should not be created
Fixes#34429
* Change AWS credential passing to be YAML anchors
Vastly simplify the AWS tasks by reducing the credentials to a YAML
block
This fix adds rpm.error exception which is raised when
API unable to get envra information from RPM package.
Also, adds integration test for local_envra method.
Fixes: #30074
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* wrap boto3 connection in try/except and handle exception, add traceback import
* params dont need to be mutually exclusive and support check mode
* add check to set nacl_ids to empty list instead of None for boto3 func
* standard exception handling using traceback
* update current RETURN documentation which is incorrect.
* update logic to check for and return ipv6 cidr instead of ipv4 cidr in a NACL
* ignore default and reserved rule numbers - greater than 32766
* was breaking on non-standard protocol numbers - AWS nacls now support full list -1 to 254
* update port range and icmp type/code handling
* add some more detail to returned nacl entries
* Update exception handling to account for BotoCoreError
Remove exception handling from the boto connection creation since it does nothing
* rules numbers from 32767 to 65535 are reserved for internal AWS use so we ignore here
* Add some integration tests for ec2_asg.
* Remove exception handling from ec2_asg boto3 connection since it is handled in boto3_conn().
* Update test failure assertions
* Use yaml anchor for credentials and remove unnecessary dependencies.
* Move AWS boto3 module credentials tests to separate target
* Remove filters from tests
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* remidate Windows debugging
Using $complex_args is not working (anymore?). We need to set $params directly.
* Fixing issue with win_iis_website parameter types
There are two types of attributes. "String" and "Configuration Attribute". We need to get the real "value" based on the type.
* Revert "remidate Windows debugging"
This reverts commit df75d3bb0d152b10c24187ce4c643b4733bae336.
* win_domain_user allow to update generic attributes
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.py fixed indentation
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.py attributes add version_added
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* win_domain_user.p1 removed attributes from result
Signed-off-by: Marko Koehne <marko@mkoehne.de>
* moved run_change outside of if statement
* cs_network_offering: streamline docs a bit
* cs_network_offering: format traffic type as returned by API
* cs_network_offering: rename return to service_offering_id
* cs_network_offering: ensure absent tests don't require anyting else than name
* cs_network_offering: beautify the default_egress_policy param
* cs_network_offering: test enabling/disabling with existing syntax
* cs_network_offering: rename service_provider_list to service_providers
* cs_network_offering: allow update max_connections
* cs_network_offering: extend returns
* cs_network_offering: extend tests with max_connections
* cloudstack: rename cs_serviceoffer to cs_service_offering
* adjust references to old name
* cs_service_offering: fix limitcpuuse not handled
* minor docs fix
* update changelog
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Don't use getattr in _get_parent_attribute to avoid recursion issues
Fixes#23609
* Move extend/prepend to field attribute
Also removes _get_attr* methods that were basically just calling
_get_parent_attribute because it needed to set those params.
Also modifies _get_parent_attribute() to pull those values from the
FieldAttributes instead of using the ones passed into the function.
* Better fixes for _get_parent_attribute
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
