* Query lookup plugin
* Add license and docstrings
* Add python3-ish imports
* Change query plugin type from lookup to filter
* Switch from dq to jsonpath_rw
* Add integration test for query filter
* Rename query filter to json_query
* Add jsonpath-rw
* Rename query filter to json_query
* Switch query implementation from jsonpath-rw to jmespath
Run setfacl/chown/chmod on each temp dir and file.
This fixes temp file permissions handling on platforms such as FreeBSD
which always return success when using find -exec. This is done by
eliminating the use of find when setting up temp files and directories.
Additionally, tests that now pass on FreeBSD have been enabled for CI.
When a task result has an empty results list, the
list should be ignored when determining the results
of `_check_key`. Here the empty list is treated the
same as a non-existent list.
This fixes a bug that manifests itself with squashed
items - namely the task result contains the correct
value for the key, but an empty results list. The
empty results list was treated as zero failures
when deciding which handler to call - so the task
show as a success in the output, but is deemed to
have failed when deciding whether to continue.
This also demonstrates a mismatch between task
result processing and play iteration.
A test is also added for this case, but it would not
have caught the bug - because the bug is really in
the display, and not the success/failure of the
task (visually the test is more accurate).
Fixesansible/ansible-modules-core#4214
This feature changes the scalar value of `serial:` to a list, which
allows users to specify a list of values, so batches can be ramped
up (commonly called "canary" setups):
- hosts: all
serial: [1, 5, 10, "100%"]
tasks:
...
Binary module tests now download pre-compiled binaries from S3
instead of downloading go and compiling the modules.
Files downloaded form SourceForge are now downloaded from S3.
* Enabled more tests in test_service on systems with systemd.
* Fix inconsistency in cleaning up test service. The conditions for service setup and service cleanup were different.
* Add check mode run for service enable.
This is a refactoring of the existing GCE utility module to support other projects on Google Cloud Platform.
The previous gce.py module was hard-coded specifically for GCE, and attempting to use it with other projects in GCP failed.
See https://github.com/ansible/ansible/pull/15918#issuecomment-220165913 for more detail.
This has also been an issue for others in the past, although they've handled it by simply
duplicating some of the logic of gce.py in their own modules.
- The existing gce.py module was renamed to gcp.py, and modified to remove any
imports or other code that refers to libcloud.compute or GCE (the GCE_* params were
retained for compatibility). I also renamed the gce_connect function to gcp_connect,
and modified the function signature to make supplying a provider, driver, and agent
information mandatory.
- A new gce.py module was created to handle connectivity to GCE. It imports the
appropriate libcloud.compute providers and drivers, and then passes them on
to gcp_connect in gcp.py. The constants and function signatures are the same
as the old gce.py, so compatibility with existing modules is retained.
- A new gcdns.py module was created to support PR ansible/ansible-modules-extras#2252
for two new Google Cloud DNS modules, and to demonstrate support for a non-GCE
Google Cloud service. It follows the same basic structure as the new gce.py module,
but imports from libcloud.dns instead.
Enable color output from integration tests in Docker containers:
* In run_tests.sh when output is attached to a terminal.
* In shippable/integration.sh using force mode (can be disabled).
Also fix blocks tests to work with or without color output
* switch cwd to basedir of task
This restores previous behaviour in pre 2.0 and allows for 'local type' plugins
and actions to have a more predictable relative path.
fixes#14489
* removed FIXME since prev commit 'fixes' this
* fix tests, now they need a loader (thanks jimi!)
* add check_mode option for tasks
includes example testcases for the template module
* extend check_mode option
* replace always_run, see also proposal rename_always_run
* rename always_run where used and add deprecation warning
* add some documentation
* have check_mode overwrite always_run
* use unique template name to prevent conflicts
test_check_mode was right before, but failed due to using the same filename as other roles
* still mention always_run in the docs
* set deprecation of always_run to version 2.4
* fix rst style
* expand documentation on per-task check mode
Adds a new test for GalaxyCLI. Tests cases when:
- no actions are provided
- invalid actions are provided
- each valid action is provided
When parser() runs successfully the method returns True, creates a
SortedOptParser instance, a Galaxy instance, and updates certain class data.
A little unittest refactoring
* Add a class decorator to generate tests when using a unittest.TestCase base class
* Add a TestCase subclass with setUp() and tearDown() that sets up
module parameter parsing
* Move test_safe_eval to use the class decorator and ModuleTestCase base
class
* Move testing of set_mode_if_different into its own file and separate
some test methods out so we get better errors and more coverage in
case of errors.
* Naming convention for test cases doesn't need to duplicate information
that's already in the file path.
* Adding a test for GalaxyCLI and two methods on which it depends. Tests execute_info method.
* Adding a test for GalaxyCLI and two methods on which it depends. Tests execute_remove method.
* Update test_galaxy.py
* Revising test for GalaxyCLI execute_remove.
* Removing mocks
I suspect this problem was masked previously as older versions of pywinrm
where significantly slower, allowing more time for the windows installer service to complete.
6eefc11c converted task.loop_control into an object, but while the other
callers were updated to use .loop_var instead of .get('loop_var'), this
site was overlooked.
This can be reproduced by including with loop_control a file that does
set_fact; a simple regression test along these lines is included.
* Lookup unencrypted password must not include salt
* Integration test lookup: remove previous directory
* Test that lookup password doesn't return salt
* Lookup password: test behavior with empty encrypt parameter
Closes#16189
- Do not update base image packages unnecessarily.
- Fix incorrect package names.
- Remove commented out RUN statements.
- Sort list of packages to install.
Due to the fact that roles may be instantiated with different sets of
params (multiple inclusions of the same role or via role dependencies),
simply tracking notified handlers by name does not work. This patch
changes the way we track handler notifications by using the handler
object itself instead of just the name, allowing for multiple internal
instances. Normally this would be bad, but we also modify the way we
search for handlers by first looking at the notifying tasks dependency
chain (ensuring that roles find their own handlers first) and then at
the main list of handlers, using the first match it finds.
This patch also modifies the way we setup the internal list of handlers,
which should allow us to correctly identify if a notified handler exists
more easily.
Fixes#15084
- Reduce image size by skipping weak package references.
- Consolidate and sort packages to install.
- Improve consistency between versions.
- Combine yum/dnf install and clean to avoid unwanted caching.
- Don't update existing packages from base image unnecessarily.
- Reduce image size by skipping recommended packages.
- Consolidate and sort packages to install.
- Improve consistency between Ubuntu versions.
- Combine apt-get update and install to avoid caching stale updates.
* add git shallow fetch test
covers https://github.com/ansible/ansible-modules-core/issues/3782
updating a repo with depth=1 fails silently if version==HEAD
* disable git shallow tests for old git versions
Older git versions don't treat the --depth option correctly.
While the git module tried to work around this and introduced subtle
bugs, ansible/ansible-modules-core#3794 falls back to full checkouts.
Don't run the tests then.
This allows the PlaybookExecutor to receive more information regarding
what happened internal to the TaskQueueManager and strategy, to determine
things like whether or not the play iteration should stop.
Fixes#15523
* Port urls.py to python3
Fixes (largely normalizing byte vs text strings) for python3
* Rework what we do with attributes that aren't set already.
* Comments
* reduce async sleep time in test
* make zypper test less destructive (don't break following uses of zypper)
* fix ca cert on suse
* fix/enable postgres/mysql on opensuseleap
* fix mysql test for mysql versions 5.7.6 and newer
* skip sni_host check on ubuntu1604
* add HTTPTESTER flag for test_uri
ubuntu 16.04 uses dash which drops env variables containing a dot
we work around this by adding an explicit env variable to enable httptester
The output of 'ansible-galaxy info' was formatting the
'galaxy_info' key with one char per line.
Previously, when building the output string, items in
role_info that had a dict for value, the label for
it's key ('galaxy_info' for ex) was being added to
the text list in addition to being appended. Only
the append is needed.
Also added a unit test in test/units/cli/test_galaxy.py,
but skip it on py3 until galaxy is py3 compatible.
fixes#15177
* Merge conflicts:
* [skip ci] Revert changes to run_tests.sh
gundalow will update this in a different PR
* [skip ci] Add in ubuntu1604 and opensuseleap
NOTE: We are not configuring anything to use these new images yet.
Therefore no impact on Travis performance
* python-mysql for opensuse
* It's mysql-server on centos6
* alias module is very basic and removing it leads to the suse default
config failing
* future improvements might test different modules and the effect of
them being removed
* When var name is the same as var content, try to template it before reporting that var is not defined.
Add asserts in test_var_blending to check this special corner case.
* Fix integration tests when using debug with list or dict.
* add tests for centos6, rhel6 and rhel7
* gen_distribution_version_testcase with python2.6
* remove unused imports
* fix redhat/vmware/... parsing
* add centos7 test case
* Make ziploader's ansible and ansible.module_utils libraries into
namespace packages.
* Move __version__ and __author__ from ansible/__init__ to
ansible/release.py. This is because namespace packages only load one
__init__.py. If that is not the __init__.py with the author and
version info then those won't be available.
* In ziplaoder, move the version ito ANSIBLE_CONSTANTS.
* Change PluginLoader to properly construct the path to the plugins even
when namespace packages are present.
* extend zypper integration tests
* fix caching issue of local RPMS on openSUSE 42.1 Leap
* add tests for simultaneous install/remove via prefixes +-
* test fail cases (rm patch or URL)
* test patch install (succes, unchanged second run, fail on wrong name)
* add test for pattern install
* include options refresh and priority introduced in ansible/ansible-modules-extras#1990
* test repo update both based on name and URL
* run on all suse flavors
* test overwriting repos by url or name
Updated python module wrapper explode method to drop 'args' file next to module.
Both execute() and excommunicate() debug methods now pass the module args via file to enable debuggers that are picky about stdin.
Updated unit tests to use a context manager for masking/restoring default streams and argv.
* add integration test for apache2_module
* fix assert syntax
* check os_family for this test
* add comment why only debian and suse are tested
* move apache2 test to destructive
* install apache2 package
- get_real_file will decrypt vault encrypted files and return a path to
a temporary file.
- cleanup_real_file will remove a temporary file created previously with
get_real_file
Ansible when there was a percentage that was calculated to be less than
1.0 would run all hosts as the value for a rolling update.
The error is due to the fact that Python will round a
float that is under 1.0 to 0, which will trigger the case of
0 hosts. The 0 host case tells ansible to run all hosts.
The fix will see if the percentage calculation after int
conversion is 0 and will else to 1 host.
This makes our recursive, ast.parse performance measures as fast as
pre-ziploader baseline.
Since this unittest isn't testing that the returned module data is
correct we don't need to worry about os.rename not having any module
data. Should devise a separate test for the module and caching code
* Ziploader proof of concept (jimi-c)
* Cleanups to proof of concept ziploader branch:
* python3 compatible base64 encoding
* zipfile compression (still need to enable toggling this off for
systems without zlib support in python)
* Allow non-wildcard imports (still need to make this recusrsive so that
we can have module_utils code that imports other module_utils code.)
* Better tracebacks: module filename is kept and module_utils directory
is kept so that tracebacks show the real filenames that the errors
appear in.
* Make sure we import modules that are used into the module_utils files that they are used in.
* Set ansible version in a more pythonic way for ziploader than we were doing in module replacer
* Make it possible to set the module compression as an inventory var
This may be necessary on systems where python has been compiled without
zlib compression.
* Refactoring of module_common code:
* module replacer only replaces values that make sense for that type of
file (example: don't attempt to replace python imports if we're in
a powershell module).
* Implement configurable shebang support for ziploader wrapper
* Implement client-side constants (for SELINUX_SPECIAL_FS and SYSLOG)
via environment variable.
* Remove strip_comments param as we're never going to use it (ruins line
numbering)
* Don't repeat ourselves about detecting REPLACER
* Add an easy way to debug
* Port test-module to the ziploader-aware modify_module()
* strip comments and blank lines from the wrapper so we send less over the wire.
* Comments cleanup
* Remember to output write the module line itself in powershell modules
* for line in lines strips the newlines so we have to add them back in
Before this patch, if config was ['/some/path'] then it would enter the
else block and config would be set to [].
The regression this patch fixes was introduced by 700db154.
* Unit tests exposed a problem where nested blocks did not correctly
hit rescue/always portions of parent blocks
* Cleaned up logic in PlayIterator
* Unfortunately fixing the above exposed a potential problem in the
block integration tests, where a failure in an "always" section may
always lead to a failed state and the termination of execution
beyond that point, so certain parts of the block integration test
were disabled.
* fetch_url shouldn't both accept follow_redirects and support follow_redircts via module.params
* Default follow_redirects for open_url should be 'urllib2'
* Add redirect test for get_url
- now workers passes queue to task_executor so it can send back events per item and on retry attempt
- updated result class to pass along events to strategy
- base strategy updated to forward new events to callback
- callbacks now remove 'items' on final result but process them directly when invoked per item
- new callback method to deal with retry attempt messages (also now obeys nolog)
- updated tests to match new signature of task_executor
fixes#14558fixes#14072
The dep chain for roles created during the compile step had bugs, in
which the dep chain was overwriten and the original tasks in the role
were not assigned a dep chain. This lead to problems in determining
whether roles had already run when in a "diamond" structure, and in
some cases roles were not correctly getting variables from parents.
Fixes#14046
this was taken out in an effort to default to the user's shell but creates issues as this is not known ahead of time
and its painful to set executable and shell_type for all servers, it should only be needed for those that restrict the user
to specific shells and when /bin/sh is not available. raw and command may still bypass this by explicitly passing None.
fixes#13882
still conditional
commit 24efa310b58c431b4d888a6315d1285da918f670
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 11:23:52 2015 -0500
Adding an additional test for copy exclusion
Adds a negative test for the situation when an exclusion doesn't
exist in the target to be copied.
commit 643ba054877cf042177d65e6e2958178bdd2fe88
Merge: e6ee59f 66a8f7e
Author: James Cammarata <jimi@sngx.net>
Date: Tue Dec 29 10:59:18 2015 -0500
Merge branch 'speedup' of https://github.com/chrismeyersfsu/ansible into chrismeyersfsu-speedup
commit 66a8f7e873ca90f7848e47b04d9b62aed23a45df
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Mon Dec 28 09:47:00 2015 -0500
better api and tests added
* _copy_results = deepcopy for better performance
* _copy_results_exclude to deepcopy but exclude certain fields. Pop
fields that do not need to be deep copied. Re-assign popped fields
after deep copy so we don't modify the original, to be copied, object.
* _copy_results_exclude unit tests
commit 93490960ff4e75f38a7cc6f6d49f10f949f1a7da
Author: Chris Meyers <chris.meyers.fsu@gmail.com>
Date: Fri Dec 25 23:17:26 2015 -0600
remove uneeded deepcopy fields
Also adds a new var, used by the prepare_tests role, to prevent it from
deleting the temp test directory at the start of each play to avoid any
potential race conditions
* Changed parse_addresses to throw exceptions instead of passing None
* Switched callers to trap and pass through the original values.
* Added very verbose notice
* Look at deprecating this and possibly validate at plugin instead
fixes#13608
For the deps setup of integration tests, as we sometimes see odd
errors we can't reproduce, which may be related to slightly out of
date package dependencies.
At its most basic, this is nothing more than an array or hash lookup,
but when used in conjunction with map, it is very useful. For example,
while constructing an "ssh-keyscan …" command to update known_hosts on
all hosts in a group, one can get a list of IP addresses with:
groups['x']|map('extract', hostvars, 'ec2_ip_address')|list
This returns hostvars[a].ec2_ip_address, hostvars[b].ec2_ip_address, and
so on. You can even specify an array of keys for a recursive lookup, and
mix string and integer keys depending on what you're looking up:
['localhost']|map('extract', hostvars, ['vars','group_names',0])|first
== hostvars['localhost']['vars']['group_names'][0]
== 'ungrouped'
Includes documentation and tests.
Modeled after the yum tests but also tests local package installations
as fixed with PR#1256.
This depends on PRs #1256, #1261 and #1262 in ansible-modules-extra.
Looks like there are two pattern caches that need to be cleared for this to work- added the second one.
Added integration tests for add_host to prevent future regressions.
Check for database presence in a nice way, rather than
dropping the database.
Thankfully there was a syntax error in the previous
version, so no database would have been dropped.
There was no check for whether it succeeded or not.
also remove condition to bypass setting user if user matches current user
this enables forcing user when set to the same user as current user and ignoring .ssh/config
while keeping .ssh/config with current user if nothing is specified.
* Fix the task_vars parameter to not default to a mutable type (dict)
* Implement invocation in the base class's run() method have each action
module call the run() method's implemention in the base class.
* Return values from the action plugins' run() method takes the return
value from the base class run() method into account so that invocation
makes its way to the output.
Fixes#12869
Revert "Remove auto-added invocation return value as it is not used by v2 and could leak sensitive data."
This reverts commit 6ce6b20268.
Remove the note that invocation was removed as we've now restored it.
Revert "keyword not in ubuntu 14.04"
This reverts commit 5c01622457.
Revert "remove invocation keyword check"
This reverts commit 5177cb3f74.
ansible-playbook now works when run with a playbook
that includes a role that includes another role
specified using csv format
Updated one of the roles used in the tests to fix
broken tests - `make test_galaxy` now works
Fixes#11486. Also addresses the problem alluded to in #10620.
This reverts commit 073f10a52a and instead
disables the failing test.
We're focusing on Python 3 support on the controller first; modules will
come later.
better error reporting on fetching errors
use scm if it exists over src
unified functions in requirements
simplified logic
added verbose to tests
cleanup code refs, unused options and dead code
moved get_opt to base class
fixes#11920fixes#12612fixes#10454
corrected output from default callback
added new tests for no_log loops
updated makefile test to check for both positive and negative occurrences of no_log
This caused an ImportError in a test module and showed up as one test
failure. Now the test module can get imported and many more tests fail
(on Python 3). Such is life. ;-)
* allow global no_log setting, no need to set at play or task level, but can be overriden by them
* allow turning off syslog only on task execution from target host (manage_syslog), overlaps with no_log functionality
* created log function for task modules to use, now we can remove all syslog references, will use systemd journal if present
* added debug flag to modules, so they can make it call new log function conditionally
* added debug logging in module's run_command
Due to the way we're now calculating delegate_to, if that value is based
on a loop variable ('item') we need to calculate all of the possible
delegated_to variables for that loop.
Fixes#12499
There doesn't appear to be anything that actually uses tmp_path in the
connection plugins so we don't need to pass that in to exec_command.
That change also means that we don't need to pass tmp_path around in
many places in the action plugins any more. there may be more cleanup
that can be done there as well (the action plugin's public run() method
takes tmp as a keyword arg but that may not be necessary).
As a sideeffect of this patch, some potential problems with chmod and
the patch, assemble, copy, and template modules has been fixed (those
modules called _remote_chmod() with the wrong order for their
parameters. Removing the tmp parameter fixed them.)
On Python 2, shlex.split() raises if you pass it a unicode object with
non-ASCII characters in it. The Ansible codebase copes by explicitly
converting the string using to_bytes() before passing it to
shlex.split().
On Python 3, shlex.split() raises ('bytes' object has no attribute 'read')
if you pass a bytes object. Oops.
This commit introduces a new wrapper function, shlex_split, that
transparently performs the to_bytes/to_unicode conversions only on
Python 2.
Currently I've only converted one call site (the one that was causing a
unit test to fail on Python 3). If this approach is deemed suitable,
I'll convert them all.
There were no inventory-specific unit tests earlier, so we add a new
directory for them with some initial low-level tests of _split_pattern
with various valid and deprecated pattern strings.
* Add exception handling when running PowerShell modules to provide exception message and stack trace.
* Enable strict mode for all PowerShell modules and internal commands.
* Update common PowerShell code to fix strict mode errors.
* Fix an issue with Set-Attr where it would not replace an existing property if already set.
* Add tests for exception handling using modified win_ping modules.
1. The test did "name: '{{hostnames}}.{{item}}'" inside a with_sequence
loop, which didn't do what was intended: it expanded hostnames into
an array, appended ".1", and set name to the resulting string. This
can be converted to a simple with_items loop.
2. Some of the entries in hostnames contained punctuation characters,
which I see no reason to support in inventory hostnames anyway.
3. Once the add_host failures are fixed, the playbook later fails when
the unicode hostnames are interpolated into debug output in ssh.py
due to an encoding error. This is only one of the many places that
may fail when using unicode inventory hostnames; we work around it
by providing an ansible_ssh_host setting.
Labels must start with an alphanumeric character, may contain
alphanumeric characters or hyphens, but must not end with a hyphen.
We enforce those rules, but allow underscores wherever hyphens are
accepted, and allow alphanumeric ranges anywhere.
We relax the definition of "alphanumeric" to include Unicode characters
even though such inventory hostnames cannot be used in practice unless
an ansible_ssh_host is set for each of them.
We still don't enforce length restrictions—the fact that we have to
accept ranges makes it more complex, and it doesn't seem especially
worthwhile.
This adds a parse_address(pattern) utility function that returns
(host,port), and uses it wherever where we accept IPv4 and IPv6
addresses and hostnames (or host patterns): the inventory parser
the the add_host action plugin.
It also introduces a more extensive set of unit tests that supersedes
the old add_host unit tests (which didn't actually test add_host, but
only the parsing function).
There was code to support set literals (on Python 2.7 and newer), but it
was buggy: SAFE_NODES.union() doesn't modify SAFE_NODES in place,
instead it returns a new set object that is then silently discarded.
I added a unit test and fixed the code. I also changed the version
check to use sys.version_tuple instead of a string comparison, for
consistency with the subsequent Python 3.4 version check that I added in
the previous commit.
The full error was
======================================================================
ERROR: test_task_executor_execute (units.executor.test_task_executor.TestTaskExecutor)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/mg/src/ansible/test/units/executor/test_task_executor.py", line 252, in test_task_executor_execute
mock_action.run.return_value = dict(ansible_facts=dict())
File "/home/mg/src/ansible/lib/ansible/executor/task_executor.py", line 317, in _execute
if self._task.async > 0:
TypeError: unorderable types: MagicMock() > int()
----------------------------------------------------------------------
Experiments show that Python 2 MagicMock() > 0 is true, so I'm setting
the async property on mock_task to 1. (If I set it to 0, the test fails
anyway.)
Required some rewiring in inventory code to make sure we're using
the DataLoader class for some data file operations, which makes mocking
them much easier.
Also identified two corner cases not currently handled by the code, related
to inventory variable sources and which one "wins". Also noticed we weren't
properly merging variables from multiple group/host_var file locations
(inventory directory vs. playbook directory locations) so fixed as well.
Replace .iteritems() with six.iteritems() everywhere except in
module_utils (because there's no 'six' on the remote host). And except
in lib/ansible/galaxy/data/metadata_template.j2, because I'm not sure
six is available there.
ansible is passing unicode arond internally so we should test the same
data.
* Add a zero length test for _count_newlines and fix the zero newlines
test to have no newlines.
