distribution/packages/emulators/standalone/citra-sa/config/S922X/sdl2-config.ini

[Controls]
# The input devices and parameters for each 3DS native input
# It should be in the format of "engine:[engine_name],[param1]:[value1],[param2]:[value2]..."
# Escape characters $0 (for ':'), $1 (for ',') and $2 (for '$') can be used in values

# for button input, the following devices are available:
#  - "keyboard" (default) for keyboard input. Required parameters:
#      - "code": the code of the key to bind
#  - "sdl" for joystick input using SDL. Required parameters:
#      - "joystick": the index of the joystick to bind
#      - "button"(optional): the index of the button to bind
#      - "hat"(optional): the index of the hat to bind as direction buttons
#      - "axis"(optional): the index of the axis to bind
#      - "direction"(only used for hat): the direction name of the hat to bind. Can be "up", "down", "left" or "right"
#      - "threshold"(only used for axis): a float value in (-1.0, 1.0) which the button is
#          triggered if the axis value crosses
#      - "direction"(only used for axis): "+" means the button is triggered when the axis value
#          is greater than the threshold; "-" means the button is triggered when the axis value
#          is smaller than the threshold
button_a=button:1,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_b=button:0,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_x=button:2,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_y=button:3,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_up=button:8,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_down=button:9,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_left=button:10,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_right=button:11,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_l=button:4,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_r=button:5,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_start=button:17,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_select=button:12,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_debug=
button_gpio14=
button_zl=button:6,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_zr=button:7,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
button_home=

# for analog input, the following devices are available:
#  - "analog_from_button" (default) for emulating analog input from direction buttons. Required parameters:
#      - "up", "down", "left", "right": sub-devices for each direction.
#          Should be in the format as a button input devices using escape characters, for example, "engine$0keyboard$1code$00"
#      - "modifier": sub-devices as a modifier.
#      - "modifier_scale": a float number representing the applied modifier scale to the analog input.
#          Must be in range of 0.0-1.0. Defaults to 0.5
#  - "sdl" for joystick input using SDL. Required parameters:
#      - "joystick": the index of the joystick to bind
#      - "axis_x": the index of the axis to bind as x-axis (default to 0)
#      - "axis_y": the index of the axis to bind as y-axis (default to 1)
circle_Pad=axis_x:0,axis_y:1,deadzone:0.100000,engine:sdl,guid:03001354474f2d556c74726120476100,port:0
c_stick=axis_x:2,axis_y:3,deadzone:0.100000,engine:sdl,guid:03001354474f2d556c74726120476100,port:0

# for motion input, the following devices are available:
#  - "motion_emu" (default) for emulating motion input from mouse input. Required parameters:
#      - "update_period": update period in milliseconds (default to 100)
#      - "sensitivity": the coefficient converting mouse movement to tilting angle (default to 0.01)
#      - "tilt_clamp": the max value of the tilt angle in degrees (default to 90)
#  - "cemuhookudp" reads motion input from a udp server that uses cemuhook's udp protocol
motion_device=

# for touch input, the following devices are available:
#  - "emu_window" (default) for emulating touch input from mouse input to the emulation window. No parameters required
#  - "cemuhookudp" reads touch input from a udp server that uses cemuhook's udp protocol
#      - "min_x", "min_y", "max_x", "max_y": defines the udp device's touch screen coordinate system
touch_device=

# Most desktop operating systems do not expose a way to poll the motion state of the controllers
# so as a way around it, cemuhook created a udp client/server protocol to broadcast the data directly
# from a controller device to the client program. Citra has a client that can connect and read
# from any cemuhook compatible motion program.

# IPv4 address of the udp input server (Default "127.0.0.1")
udp_input_address=

# Port of the udp input server. (Default 26760)
udp_input_port=

# The pad to request data on. Should be between 0 (Pad 1) and 3 (Pad 4). (Default 0)
udp_pad_index=

[Core]
# Whether to use the Just-In-Time (JIT) compiler for CPU emulation
# 0: Interpreter (slow), 1 (default): JIT (fast)
use_cpu_jit =

# Change the Clock Frequency of the emulated 3DS CPU.
# Underclocking can increase the performance of the game at the risk of freezing.
# Overclocking may fix lag that happens on console, but also comes with the risk of freezing.
# Range is any positive integer (but we suspect 25 - 400 is a good idea) Default is 100
cpu_clock_percentage = 100

[Renderer]
# Whether to render using OpenGL or Software
# 0: Software, 1: OpenGL (default)
graphics_api = 2

# Whether to render using GLES or OpenGL
# 0 (default): OpenGL, 1: GLES
use_gles = 1

# Whether to use hardware shaders to emulate 3DS shaders
# 0: Software, 1 (default): Hardware
use_hw_shader =

# Whether to use accurate multiplication in hardware shaders
# 0: Off (Faster, but causes issues in some games) 1: On (Default. Slower, but correct)
shaders_accurate_mul = Off

# Whether to use the Just-In-Time (JIT) compiler for shader emulation
# 0: Interpreter (slow), 1 (default): JIT (fast)
use_shader_jit =

# Forces VSync on the display thread. Usually doesn't impact performance, but on some drivers it can
# so only turn this off if you notice a speed difference.
# 0: Off, 1 (default): On
use_vsync_new = Off

# Reduce stuttering by storing and loading generated shaders to disk
# 0: Off, 1 (default. On)
use_disk_shader_cache =

# Resolution scale factor
# 0: Auto (scales resolution to window size), 1: Native 3DS screen resolution, Otherwise a scale
# factor for the 3DS resolution
resolution_factor = 1

# Texture filter
# 0: None, 1: Anime4K, 2: Bicubic, 3: Nearest Neighbor, 4: ScaleForce, 5: xBRZ
texture_filter =

# Limits the speed of the game to run no faster than this value as a percentage of target speed.
# Will not have an effect if unthrottled is enabled.
# 5 - 995: Speed limit as a percentage of target game speed. 0 for unthrottled. 100 (default)
frame_limit =

# Overrides the frame limiter to use frame_limit_alternate instead of frame_limit.
# 0: Off (default), 1: On
use_frame_limit_alternate =

# Alternate speed limit to be used instead of frame_limit if use_frame_limit_alternate is enabled
# 5 - 995: Speed limit as a percentage of target game speed. 0 for unthrottled. 200 (default)
frame_limit_alternate =

# The clear color for the renderer. What shows up on the sides of the bottom screen.
# Must be in range of 0.0-1.0. Defaults to 0.0 for all.
bg_red =
bg_blue =
bg_green =

# Whether and how Stereoscopic 3D should be rendered
# 0 (default): Off, 1: Side by Side, 2: Anaglyph, 3: Interlaced, 4: Reverse Interlaced
render_3d =

# Change 3D Intensity
# 0 - 100: Intensity. 0 (default)
factor_3d =

# Change Default Eye to Render When in Monoscopic Mode
# 0 (default): Left, 1: Right
mono_render_option =

# The name of the post processing shader to apply.
# Loaded from shaders if render_3d is off or side by side.
pp_shader_name =

# The name of the shader to apply when render_3d is anaglyph.
# Loaded from shaders/anaglyph
anaglyph_shader_name =

# Whether to enable linear filtering or not
# This is required for some shaders to work correctly
# 0: Nearest, 1 (default): Linear
filter_mode =

[Layout]
# Layout for the screen inside the render window.
# 0 (default): Default Top Bottom Screen
# 1: Single Screen Only
# 2: Large Screen Small Screen
# 3: Side by Side
# 4: Separate Windows
layout_option = 3

# Toggle custom layout (using the settings below) on or off.
# 0 (default): Off, 1: On
custom_layout = 0

# Screen placement when using Custom layout option
# 0x, 0y is the top left corner of the render window.
custom_top_left =
custom_top_top =
custom_top_right =
custom_top_bottom =
custom_bottom_left =
custom_bottom_top =
custom_bottom_right =
custom_bottom_bottom =

# Opacity of second layer when using custom layout option (bottom screen unless swapped)
custom_second_layer_opacity =

# Swaps the prominent screen with the other screen.
# For example, if Single Screen is chosen, setting this to 1 will display the bottom screen instead of the top screen.
# 0 (default): Top Screen is prominent, 1: Bottom Screen is prominent
swap_screen = 0

# Toggle upright orientation, for book style games.
# 0 (default): Off, 1: On
upright_screen = 0

# The proportion between the large and small screens when playing in Large Screen Small Screen layout.
# Must be a real value between 1.0 and 16.0. Default is 4
large_screen_proportion =

# Dumps textures as PNG to dump/textures/[Title ID]/.
# 0 (default): Off, 1: On
dump_textures =

# Reads PNG files from load/textures/[Title ID]/ and replaces textures.
# 0 (default): Off, 1: On
custom_textures =

# Loads all custom textures into memory before booting.
# 0 (default): Off, 1: On
preload_textures =

# Loads custom textures asynchronously with background threads.
# 0: Off, 1 (default): On
async_custom_loading =

[Audio]
# Whether or not to enable DSP LLE
# 0 (default): No, 1: Yes
enable_dsp_lle =

# Whether or not to run DSP LLE on a different thread
# 0 (default): No, 1: Yes
enable_dsp_lle_thread =

# Whether or not to enable the audio-stretching post-processing effect.
# This effect adjusts audio speed to match emulation speed and helps prevent audio stutter,
# at the cost of increasing audio latency.
# 0: No, 1 (default): Yes
enable_audio_stretching =

# Output volume.
# 1.0 (default): 100%, 0.0; mute
volume =

# Which audio output type to use.
# 0 (default): Auto-select, 1: No audio output, 2: Cubeb (if available), 3: OpenAL (if available), 4: SDL2 (if available)
output_type =

# Which audio output device to use.
# auto (default): Auto-select
output_device =

# Which audio input type to use.
# 0 (default): Auto-select, 1: No audio input, 2: Static noise, 3: Cubeb (if available), 4: OpenAL (if available)
input_type =

# Which audio input device to use.
# auto (default): Auto-select
input_device =

[Data Storage]
# Whether to create a virtual SD card.
# 1 (default): Yes, 0: No
use_virtual_sd =

# Whether to use custom storage locations
# 1: Yes, 0 (default): No
use_custom_storage =

# The path of the virtual SD card directory.
# empty (default) will use the user_path
sdmc_directory =

# The path of NAND directory.
# empty (default) will use the user_path
nand_directory =

[System]
# The system model that Citra will try to emulate
# 0: Old 3DS, 1: New 3DS (default)
is_new_3ds =

# The system region that Citra will use during emulation
# -1: Auto-select (default), 0: Japan, 1: USA, 2: Europe, 3: Australia, 4: China, 5: Korea, 6: Taiwan
region_value =

# The clock to use when citra starts
# 0: System clock (default), 1: fixed time
init_clock =

# Time used when init_clock is set to fixed_time in the format %Y-%m-%d %H:%M:%S
# set to fixed time. Default 2000-01-01 00:00:01
# Note: 3DS can only handle times later then Jan 1 2000
init_time =

[Camera]
# Which camera engine to use for the right outer camera
# blank (default): a dummy camera that always returns black image
camera_outer_right_name =

# A config string for the right outer camera. Its meaning is defined by the camera engine
camera_outer_right_config =

# The image flip to apply
# 0: None (default), 1: Horizontal, 2: Vertical, 3: Reverse
camera_outer_right_flip =

# ... for the left outer camera
camera_outer_left_name =
camera_outer_left_config =
camera_outer_left_flip =

# ... for the inner camera
camera_inner_name =
camera_inner_config =
camera_inner_flip =

[Miscellaneous]
# A filter which removes logs below a certain logging level.
# Examples: *:Debug Kernel.SVC:Trace Service.*:Critical
log_filter = *:Info

[Debugging]
# Record frame time data, can be found in the log directory. Boolean value
record_frame_times =

# Port for listening to GDB connections.
use_gdbstub=false
gdbstub_port=24689

# Whether to enable additional debugging information during emulation
# 0 (default): Off, 1: On
renderer_debug =

# To LLE a service module add "LLE\<module name>=true"

[WebService]
# Whether or not to enable telemetry
# 0: No, 1 (default): Yes
enable_telemetry =
# URL for Web API
web_api_url = https://api.citra-emu.org
# Username and token for Citra Web Service
# See https://profile.citra-emu.org/ for more info
citra_username =
citra_token =

[Video Dumping]
# Format of the video to output, default: webm
output_format =

# Options passed to the muxer (optional)
# This is a param package, format: [key1]:[value1],[key2]:[value2],...
format_options =

# Video encoder used, default: libvpx-vp9
video_encoder =

# Options passed to the video codec (optional)
video_encoder_options =

# Video bitrate, default: 2500000
video_bitrate =

# Audio encoder used, default: libvorbis
audio_encoder =

# Options passed to the audio codec (optional)
audio_encoder_options =

# Audio bitrate, default: 64000
audio_bitrate =