# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2017-2020 Team LibreELEC (https://libreelec.tv)
# Copyright (C) 2023 JELOS (https://github.com/JustEnoughLinuxOS)

source ${PROJECT_DIR}/${PROJECT}/devices/${DEVICE}/options

case "${PKG_SOC}" in
  rk35*|rk3399)
    IDBSEEK="bs=512 seek=64"
  ;;
  *)
    IDBSEEK="bs=32k seek=1"
  ;;
esac

if [ -f "${RELEASE_DIR}/3rdparty/bootloader/idbloader.img" ]; then
  echo "image: burn idbloader.img to image... (${PKG_SOC},${IDBSEEK})"
  dd if="${RELEASE_DIR}/3rdparty/bootloader/idbloader.img" of="$DISK" ${IDBSEEK} conv=sync,noerror,notrunc >"${SAVE_ERROR}" 2>&1 || show_error
fi



case "${PKG_SOC}" in
  rk35*)
	if [ -f "${RELEASE_DIR}/3rdparty/bootloader/u-boot.itb" ]; then
	  echo "image: burn uboot.itb to image... (${PKG_SOC})"
	  dd if="${RELEASE_DIR}/3rdparty/bootloader/u-boot.itb" of="${DISK}" bs=512 seek=16384 conv=sync,noerror,notrunc >"${SAVE_ERROR}" 2>&1 || show_error
	fi
	if [ -f "${RELEASE_DIR}/3rdparty/bootloader/trust.img" ]; then
	  echo "image: burn trust.img to image..."
	  dd if="${RELEASE_DIR}/3rdparty/bootloader/trust.img" of="${DISK}" bs=512 seek=24576 conv=sync,noerror,notrunc >"${SAVE_ERROR}" 2>&1 || show_error
	elif [ -f "${RELEASE_DIR}/3rdparty/bootloader/resource.img" ]; then
	  echo "image: burn resource.img to image..."
	  dd if="${RELEASE_DIR}/3rdparty/bootloader/resource.img" of="${DISK}" bs=512 seek=24576 conv=sync,noerror,notrunc >"${SAVE_ERROR}" 2>&1 || show_error
	fi
  ;;
  *)
    if [ -f "${RELEASE_DIR}/3rdparty/bootloader/uboot.img" ]; then
      echo "image: burn uboot.img to image..."
      dd if="${RELEASE_DIR}/3rdparty/bootloader/uboot.img" of="$DISK" bs=512 seek=16384 conv=sync,noerror,notrunc >"${SAVE_ERROR}" 2>&1 || show_error
    fi
    if [ -f "${RELEASE_DIR}/3rdparty/bootloader/trust.img" ]; then
      echo "image: burn trust.img to image..."
      dd if="${RELEASE_DIR}/3rdparty/bootloader/trust.img" of="$DISK" bs=512 seek=24576 conv=sync,noerror,notrunc >"${SAVE_ERROR}" 2>&1 || show_error
    fi
  ;;
esac

#Create boot.ini
if [ "${BOOT_INI}" == true ]
then
  echo "boot: create boot.ini..."
  cp -f ${PROJECT_DIR}/${PROJECT}/devices/${DEVICE}/boot/boot.ini ${LE_TMP}/boot.ini
  sed -i "s~@UUID_SYSTEM@~${UUID_SYSTEM}~g" ${LE_TMP}/boot.ini
  sed -i "s~@UUID_STORAGE@~${UUID_STORAGE}~g" ${LE_TMP}/boot.ini
  sed -i "s~@EXTRA_CMDLINE@~${EXTRA_CMDLINE}~g" ${LE_TMP}/boot.ini
  mcopy -so "${LE_TMP}/boot.ini" ::
fi

mkdir -p "${LE_TMP}/extlinux"

# copy device trees to part1
for DTB in ${DEVICE_DTB[@]}
do
  if [ -e "${DTB}.dtb" ]
  then
    echo "image: copy device trees to image..."
    mcopy -o "${DTB}.dtb" ::
  fi
done

if [ "${EXT_LINUX_CONF}" == true ]
then
mkdir -p "${LE_TMP}/extlinux"

if [ "${TRUST_LABEL}" = "resource" ] || \
   [ "${#DEVICE_DTB[@]}" -gt 1 ]
then
  echo "image: Set FDTDIR to /..."
  FDTMODE="FDTDIR /"
else
  echo "image: Set FDT to ${DEVICE_DTB}..."
  FDTMODE="FDT /${DEVICE_DTB}.dtb"
fi

echo "image: Set extlinux.conf..."
cat << EOF > "${LE_TMP}/extlinux/extlinux.conf"
LABEL ${DISTRO}
  LINUX /${KERNEL_NAME}
  ${FDTMODE}
  APPEND boot=UUID=${UUID_SYSTEM} disk=UUID=${UUID_STORAGE} ${EXTRA_CMDLINE}
EOF

mcopy -so "${LE_TMP}/extlinux" ::
fi