################################################################################ # setup device defaults ################################################################################ # The TARGET_CPU variable controls which processor should be targeted for # generated code. case $TARGET_ARCH in aarch64) TARGET_KERNEL_ARCH="arm64" TARGET_PATCH_ARCH="aarch64" TARGET_FLOAT="hard" TARGET_CPU="cortex-a35" TARGET_CPU_FLAGS="+crc+fp+simd" TARGET_FPU="fp-armv8" TARGET_FEATURES="64bit" ;; arm) TARGET_KERNEL_ARCH="arm64" TARGET_PATCH_ARCH="aarch64" TARGET_FLOAT="hard" TARGET_CPU="cortex-a35" TARGET_CPU_FLAGS="+crc" TARGET_FPU="crypto-neon-fp-armv8" TARGET_FEATURES="32bit" ;; esac # Kernel target KERNEL_TARGET="Image" LINUX="RG351MP" BOOTLOADER="u-boot" DEVICE_DTB="rk3326-rg351mp-linux" UBOOT_SYSTEM="rg351mp" PKG_SOC="px30" PKG_DATAFILE="$PKG_RKBIN/bin/rk33/rk3326_ddr_333MHz_v1.15.bin" PKG_LOADER="$PKG_RKBIN/bin/rk33/rk3326_miniloader_v1.20.bin" PKG_BL31="$PKG_RKBIN/bin/rk33/rk3326_bl31_v1.21.elf" PKG_LOAD_ADDR="0x00200000" BOOT_INI=true # Additional kernel make parameters (for example to specify the u-boot loadaddress) KERNEL_MAKE_EXTRACMD="" KERNEL_MAKE_EXTRACMD+=" rockchip/${DEVICE_DTB}.dtb" # Mali GPU family MALI_FAMILY="g31" OPENGLES="libmali" MALIDRIVER="libmali-bifrost-g31-r13p0-gbm" # Define the CPU HW_CPU="Rockchip RK3326" # kernel serial console EXTRA_CMDLINE="quiet console=ttyFIQ0 console=tty0 net.iframes=0 fbcon=rotate:0 ssh consoleblank=0 systemd.show_status=0 loglevel=0 panic=20" # additional packages to install # ADDITIONAL_PACKAGES="" # additional Firmware to use (dvb-firmware, misc-firmware, wlan-firmware) # Space separated list is supported, # e.g. FIRMWARE="dvb-firmware misc-firmware wlan-firmware" FIRMWARE="misc-firmware wlan-firmware" #rockchip-firmware # additional drivers to install: # for a list of additional drivers see packages/linux-drivers # Space separated list is supported, # e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2" # ADDITIONAL_DRIVERS="RTL8812AU" #RTL8188EU RTL8814AU RTL8192DU RTL8812AU RTL8821CU RTL8192CU RTL8192EU # build and install driver addons (yes / no) DRIVER_ADDONS_SUPPORT="no" # driver addons to install: # for a list of additinoal drivers see packages/linux-driver-addons # Space separated list is supported, DRIVER_ADDONS="" #dvb-latest # debug tty path DEBUG_TTY="/dev/ttyFIQ0" # Skins to install (Estuary) # Space separated list is supported, # e.g. SKINS="Estuary" SKINS="Estuary" # Default Skin (Estuary) SKIN_DEFAULT="Estuary" # Select whether to use default (upstream xbmc/xbmc) repo, or specific vendor repo KODI_VENDOR="default" # install extra subtitle Fonts for KODI (yes / no) KODI_EXTRA_FONTS="yes" # build and install PulseAudio support (yes / no) PULSEAUDIO_SUPPORT="yes" # build and install espeak support (yes / no) ESPEAK_SUPPORT="no" # build and install with BluRay support (yes / no) KODI_BLURAY_SUPPORT="no" # build and install with BD+ support # (BD+ decryption support in KODI) (yes / no) BLURAY_BDPLUS_SUPPORT="no" # build and install with AACS support # (BD decryption support in KODI) (yes / no) BLURAY_AACS_SUPPORT="no" # build and install with DVDCSS support # (DVD decryption support in KODI) (yes / no) KODI_DVDCSS_SUPPORT="no" # build and install bluetooth support (yes / no) BLUETOOTH_SUPPORT="no" # build and install with KODI webfrontend (yes / no) KODI_WEBSERVER_SUPPORT="no" # build and install Avahi (Zeroconf) daemon (yes / no) AVAHI_DAEMON="no" # build with UPnP support (yes / no) KODI_UPNP_SUPPORT="no" # build with MySQL support (mysql / mariadb / none) KODI_MYSQL_SUPPORT="none" # build xbmc with optical drive support (yes / no) KODI_OPTICAL_SUPPORT="no" # build with AirPlay support (stream videos from iDevices to KODI) (yes / no) KODI_AIRPLAY_SUPPORT="no" # build with AirTunes support (stream music from iDevices to KODI) (yes / no) KODI_AIRTUNES_SUPPORT="no" # build with libnfs support (mounting nfs shares with KODI) (yes / no) KODI_NFS_SUPPORT="no" # build with Samba Client support (mounting SAMBA shares with KODI) (yes / no) KODI_SAMBA_SUPPORT="no" # build with NFS support (mounting nfs shares via the OS) (yes / no) NFS_SUPPORT="no" # build with Samba Client support (mounting samba shares via the OS) (yes / no) SAMBA_SUPPORT="no" # build and install Samba Server (yes / no) SAMBA_SERVER="yes" # build and install SFTP Server (yes / no) SFTP_SERVER="yes" # build and install OpenVPN support (yes / no) OPENVPN_SUPPORT="no" # build and install diskmounter support (udevil) # this service provide auto mounting support for external drives in the # mediacenter also automount internally drives at boottime via udev (yes / no) UDEVIL="yes" # build and install exFAT fuse support (yes / no) EXFAT="yes" # build and install NTFS-3G fuse support (yes / no) NTFS3G="no" # build and install hfs filesystem utilities (yes / no) HFSTOOLS="no" # build and install remote support (yes / no) REMOTE_SUPPORT="no" # build and install CEC adapter support (yes / no) CEC_SUPPORT="no" # build and install CEC framework support (yes / no) CEC_FRAMEWORK_SUPPORT="no" # build and install iSCSI support - iscsistart (yes / no) ISCSI_SUPPORT="no" # Support for partitioning and formating disks in initramfs (yes / no) # This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage INITRAMFS_PARTED_SUPPORT="no" # build with swap support (yes / no) SWAP_SUPPORT="yes" # swap support enabled per default (yes / no) SWAP_ENABLED_DEFAULT="yes" # swapfile size if SWAP_SUPPORT=yes in MB SWAPFILESIZE="384" # cron support (yes / no) CRON_SUPPORT="no" # Distribution Specific source location #DISTRO_MIRROR="http://sources.libreelec.tv/mirror" #DISTRO_SRC="http://sources.libreelec.tv/$LIBREELEC_VERSION" # Addon Server Url ADDON_SERVER_URL="" # Addon ID of the default addon repository ADDON_REPO_ID="" # Name of the default addon repository ADDON_REPO_NAME="" # Version of the default addon repository ADDON_REPO_VERSION="" # set the addon dirs ADDON_PATH="" ADDON_URL="" # Settings package name - blank if not required DISTRO_PKG_SETTINGS="" # IR remote protocols supported in default config IR_REMOTE_PROTOCOLS="" # IR remote keymaps supported in default config IR_REMOTE_KEYMAPS="" # htop tool (yes / no) HTOP_TOOL="yes"