################################################################################ # setup device defaults ################################################################################ # The TARGET_CPU variable controls which processor should be targeted for # generated code. case ${TARGET_ARCH} in aarch64) TARGET_KERNEL_ARCH="arm64" TARGET_PATCH_ARCH="aarch64" TARGET_CPU="cortex-a76.cortex-a55" TARGET_CPU_FLAGS="+crc+crypto" TARGET_FPU="fp-armv8" TARGET_FLOAT="hard" TARGET_FEATURES="64bit" ;; arm) TARGET_KERNEL_ARCH="arm64" TARGET_PATCH_ARCH="aarch64" TARGET_CPU="cortex-a76.cortex-a55" TARGET_CPU_FLAGS="+crc" TARGET_FPU="crypto-neon-fp-armv8" TARGET_FLOAT="hard" TARGET_FEATURES="32bit" ;; esac # Kernel target DEVICE_NAME="RK3588" KERNEL_TARGET="Image" BOOTLOADER="u-boot" PARTITION_TABLE="gpt" UBOOT_LABEL="uboot" # Single dtb settings TRUST_LABEL="trust" DEVICE_DTB=("rk3588s-orangepi-5") UBOOT_DTB="${DEVICE_DTB[0]}" # Multi dtb settings #TRUST_LABEL="resource" #DEVICE_DTB=("rk3588s-orangepi-5" "rk3588-rock-5b" "rk3588s-indiedroid-nova") #UBOOT_DTB="rk3588-evb" UBOOT_CONFIG="orangepi_5_defconfig" PKG_SOC="rk3588" PKG_DATAFILE="${PKG_RKBIN}/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin" PKG_LOADER="spl/u-boot-spl.bin" PKG_BL31="${PKG_RKBIN}/bin/rk35/rk3588_bl31_v1.38.elf" PKG_LOAD_ADDR="0x00200000" BOOT_INI=false EXT_LINUX_CONF=true # Additional kernel make parameters (for example to specify the u-boot loadaddress) KERNEL_MAKE_EXTRACMD=" $(for DTB in "${DEVICE_DTB[@]}"; do echo -n "rockchip/${DTB}.dtb "; done)" # Define the CPU HW_CPU="Rockchip RK3588" # Mali GPU family MALI_FAMILY="g610" GRAPHIC_DRIVERS="panfrost" # OpenGL(X) implementation to use (mesa / no) OPENGL="mesa" # OpenGL-ES implementation to use (mesa / no) OPENGLES="mesa" # Displayserver to use (weston / x11 / no) DISPLAYSERVER="wl" # Windowmanager to use (fluxbox / weston / no) WINDOWMANAGER="weston" # kernel serial console EXTRA_CMDLINE="rootwait quiet loglevel=0 console=ttyUSB0,1500000 console=tty0 coherent_pool=2M ssh consoleblank=0 panic=20" # additional packages to install # ADDITIONAL_PACKAGES="" # additional Firmware to use (dvb-firmware, misc-firmware, wlan-firmware) # Space separated list is supported, # e.g. FIRMWARE="dvb-firmware misc-firmware wlan-firmware" FIRMWARE="misc-firmware wlan-firmware libmali_rk3588 RTL8821CS-firmware" # additional drivers to install: # for a list of additional drivers see packages/linux-drivers # Space separated list is supported, # e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2" ADDITIONAL_DRIVERS+=" RTL8852xx" # build and install driver addons (yes / no) DRIVER_ADDONS_SUPPORT="no" # driver addons to install: # for a list of additinoal drivers see packages/linux-driver-addons # Space separated list is supported, DRIVER_ADDONS="" # debug tty path DEBUG_TTY="/dev/ttyFIQ0" # build and install bluetooth support (yes / no) BLUETOOTH_SUPPORT="yes" # build and install Avahi (Zeroconf) daemon (yes / no) AVAHI_DAEMON="no" # build with NFS support (mounting nfs shares via the OS) (yes / no) NFS_SUPPORT="no" # build with Samba Client support (mounting samba shares via the OS) (yes / no) SAMBA_SUPPORT="no" # build and install Samba Server (yes / no) SAMBA_SERVER="yes" # build and install SFTP Server (yes / no) SFTP_SERVER="yes" # build and install OpenVPN support (yes / no) OPENVPN_SUPPORT="no" # build and install ZeroTier support (yes / no) ZEROTIER_SUPPORT="yes" # build and install diskmounter support (udevil) # this service provide auto mounting support for external drives in the # mediacenter also automount internally drives at boottime via udev (yes / no) UDEVIL="yes" # build and install exFAT fuse support (yes / no) EXFAT="yes" # build and install NTFS-3G fuse support (yes / no) NTFS3G="no" # build and install hfs filesystem utilities (yes / no) HFSTOOLS="no" # Support for partitioning and formating disks in initramfs (yes / no) # This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage INITRAMFS_PARTED_SUPPORT="no" # build with swap support (yes / no) SWAP_SUPPORT="yes" # swap support enabled per default (yes / no) SWAP_ENABLED_DEFAULT="yes" # swapfile size if SWAP_SUPPORT=yes in MB SWAPFILESIZE="384" # cron support (yes / no) CRON_SUPPORT="no" # Settings package name - blank if not required DISTRO_PKG_SETTINGS="" # htop tool (yes / no) HTOP_TOOL="yes"