#
# uMTP Responder config file
# Must be copied to /etc/umtprd/umtprd.conf
#

# Loop / daemon mode
# Set to 1 to don't shutdown uMTPrd when the link is disconnected.

loop_on_disconnect 1

#storage command : Create add a storage entry point. Up to 16 entry points supported
#Syntax : storage "PATH" "NAME"

storage "/storage/roms"  "Roms"

# Set the USB manufacturer string

manufacturer "Jelos"

# Set the USB Product string

product "Jelos Device"

# Set the USB Serial number string

serial "00000001"

# Set the USB interface string. Should be always "MTP"

interface "MTP"

# Set the USB Vendor ID, Product ID and class

usb_vendor_id  0x1D6B # Linux Foundation
usb_product_id 0x0100 # PTP Gadget
usb_class 0x6         # Image
usb_subclass 0x1      # Still Imaging device
usb_protocol 0x1      #

# Device version

usb_dev_version 0x3008

# inotify support
# If you want disable the events support (beta), uncomment the following line :

# no_inotify 0x1

#
# USB gadget device driver path
#

########################################################################
#
# -- Generic FunctionFS Mode --
#
########################################################################

usb_functionfs_mode 0x1

usb_dev_path   "/dev/ffs-umtp/ep0"
usb_epin_path  "/dev/ffs-umtp/ep1"
usb_epout_path "/dev/ffs-umtp/ep2"
usb_epint_path "/dev/ffs-umtp/ep3"

usb_max_packet_size 0x200

########################################################################
#
# -- GadgetFS Mode : Atmel Sama5D2Xplained board --
#
########################################################################

#usb_functionfs_mode 0x0

#usb_dev_path   "/dev/gadget/atmel_usba_udc"
#usb_epin_path  "/dev/gadget/ep1"
#usb_epout_path "/dev/gadget/ep2"
#usb_epint_path "/dev/gadget/ep3"

# Max USB packet size

#usb_max_packet_size 0x200

########################################################################
#
# -- GadgetFS Mode : Raspberry PI Zero / Raspberry PI Zero W Boards --
#
########################################################################

#usb_functionfs_mode 0x0

#usb_dev_path   "/dev/gadget/20980000.usb"
#usb_epin_path  "/dev/gadget/ep1in"
#usb_epout_path "/dev/gadget/ep2out"
#usb_epint_path "/dev/gadget/ep3in"

# Max USB packet size

#usb_max_packet_size 0x200