################################################################################
# setup device defaults
################################################################################

  # The TARGET_CPU variable controls which processor should be targeted for
  # generated code.
   case ${TARGET_ARCH} in
      aarch64)
        TARGET_KERNEL_ARCH="arm64"
        TARGET_PATCH_ARCH="aarch64"
        TARGET_CPU="cortex-a76.cortex-a55"
        TARGET_CPU_FLAGS="+crc+crypto"
        TARGET_FPU="fp-armv8"
	TARGET_FLOAT="hard"
        TARGET_FEATURES="64bit"
        ;;
      arm)
        TARGET_KERNEL_ARCH="arm64"
        TARGET_PATCH_ARCH="aarch64"
        TARGET_CPU="cortex-a76.cortex-a55"
        TARGET_CPU_FLAGS="+crc"
        TARGET_FPU="crypto-neon-fp-armv8"
	TARGET_FLOAT="hard"
        TARGET_FEATURES="32bit"
        ;;
    esac

  # Kernel target
    DEVICE_NAME="RK3588"
    KERNEL_TARGET="Image"
    BOOTLOADER="u-boot"
    PARTITION_TABLE="gpt"
    UBOOT_LABEL="uboot"

  # Single dtb settings
    TRUST_LABEL="trust"
    DEVICE_DTB=("rk3588s-orangepi-5")
    UBOOT_DTB="${DEVICE_DTB[0]}"
    
  # Multi dtb settings
    #TRUST_LABEL="resource"
    #DEVICE_DTB=("rk3588s-orangepi-5" "rk3588-rock-5b" "rk3588s-indiedroid-nova")
    #UBOOT_DTB="rk3588-evb"

    UBOOT_CONFIG="orangepi_5_defconfig"
    PKG_SOC="rk3588"
    PKG_DATAFILE="${PKG_RKBIN}/bin/rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.08.bin"
    PKG_LOADER="spl/u-boot-spl.bin"
    PKG_BL31="${PKG_RKBIN}/bin/rk35/rk3588_bl31_v1.28.elf"
    PKG_LOAD_ADDR="0x00200000"
    BOOT_INI=false

  # Additional kernel make parameters (for example to specify the u-boot loadaddress)
    KERNEL_MAKE_EXTRACMD=" $(for DTB in "${DEVICE_DTB[@]}"; do echo -n "rockchip/${DTB}.dtb "; done)"
   
  # Define the CPU
    HW_CPU="Rockchip RK3588"

  # Mali GPU family
    MALI_FAMILY="g610"
    GRAPHIC_DRIVERS="panfrost"

  # OpenGL(X) implementation to use (mesa / no)
    OPENGL="mesa"

  # OpenGL-ES implementation to use (mesa / no)
    OPENGLES="mesa"

  # Displayserver to use (weston / x11 / no)
    DISPLAYSERVER="wl"

  # Windowmanager to use (fluxbox / weston / no)
    WINDOWMANAGER="weston"
  
  # kernel serial console
    EXTRA_CMDLINE="rootwait quiet loglevel=0 console=ttyUSB0,1500000 console=tty0 coherent_pool=2M ssh consoleblank=0 panic=20"

  # additional packages to install
    ADDITIONAL_PACKAGES=" emulators gamesupport"

  # additional Firmware to use (dvb-firmware, misc-firmware, wlan-firmware)
  # Space separated list is supported,
  # e.g. FIRMWARE="dvb-firmware misc-firmware wlan-firmware"
    FIRMWARE="misc-firmware wlan-firmware libmali_rk3588 RTL8821CS-firmware"

  # additional drivers to install:
  # for a list of additional drivers see packages/linux-drivers
  # Space separated list is supported,
  # e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"

  # build and install driver addons (yes / no)
    DRIVER_ADDONS_SUPPORT="no"
  
  # driver addons to install:
  # for a list of additinoal drivers see packages/linux-driver-addons
  # Space separated list is supported,
    DRIVER_ADDONS=""

  # debug tty path
    DEBUG_TTY="/dev/ttyFIQ0"
   
  # build and install PulseAudio support (yes / no)
    PULSEAUDIO_SUPPORT="yes"
 
  # build and install bluetooth support (yes / no)
    BLUETOOTH_SUPPORT="no"

  # build and install Avahi (Zeroconf) daemon (yes / no)
    AVAHI_DAEMON="no"

  # build with NFS support (mounting nfs shares via the OS) (yes / no)
    NFS_SUPPORT="no"

  # build with Samba Client support (mounting samba shares via the OS) (yes / no)
    SAMBA_SUPPORT="no"

  # build and install Samba Server (yes / no)
    SAMBA_SERVER="yes"

  # build and install SFTP Server (yes / no)
    SFTP_SERVER="yes"

  # build and install OpenVPN support (yes / no)
    OPENVPN_SUPPORT="no"

  # build and install diskmounter support (udevil)
  # this service provide auto mounting support for external drives in the
  # mediacenter also automount internally drives at boottime via udev (yes / no)
    UDEVIL="yes"

  # build and install exFAT fuse support (yes / no)
    EXFAT="yes"

  # build and install NTFS-3G fuse support (yes / no)
    NTFS3G="no"

  # build and install hfs filesystem utilities (yes / no)
    HFSTOOLS="no"

  # Support for partitioning and formating disks in initramfs (yes / no)
  # This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
    INITRAMFS_PARTED_SUPPORT="no"

  # build with swap support (yes / no)
    SWAP_SUPPORT="yes"

  # swap support enabled per default (yes / no)
    SWAP_ENABLED_DEFAULT="yes"

  # swapfile size if SWAP_SUPPORT=yes in MB
    SWAPFILESIZE="384"

  # cron support (yes / no)
    CRON_SUPPORT="no"

  # Settings package name - blank if not required
    DISTRO_PKG_SETTINGS=""

  # htop tool (yes / no)
    HTOP_TOOL="yes"