wbrawner/distribution
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
distribution/projects/Rockchip/packages/linux/patches/RK3326/000-rk3326-dts.patch

2404 lines
74 KiB
Diff
Raw Blame History

diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/Makefile linux/arch/arm64/boot/dts/rockchip/Makefile
--- linux.orig/arch/arm64/boot/dts/rockchip/Makefile 2024-01-17 03:47:10.074350115 +0000
+++ linux/arch/arm64/boot/dts/rockchip/Makefile 2024-01-17 04:01:50.682844812 +0000
@@ -9,9 +9,12 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-ro
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-magicx-xu10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-powkiddy-rgb10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/px30.dtsi linux/arch/arm64/boot/dts/rockchip/px30.dtsi
--- linux.orig/arch/arm64/boot/dts/rockchip/px30.dtsi 2024-01-17 03:47:10.078350209 +0000
+++ linux/arch/arm64/boot/dts/rockchip/px30.dtsi 2024-01-17 03:59:58.108276677 +0000
@@ -114,27 +114,11 @@
compatible = "operating-points-v2";
opp-shared;
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <950000 950000 1350000>;
- clock-latency-ns = <40000>;
- opp-suspend;
- };
- opp-816000000 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <1050000 1050000 1350000>;
- clock-latency-ns = <40000>;
- };
opp-1008000000 {
opp-hz = /bits/ 64 <1008000000>;
opp-microvolt = <1175000 1175000 1350000>;
clock-latency-ns = <40000>;
};
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1300000 1300000 1350000>;
- clock-latency-ns = <40000>;
- };
opp-1296000000 {
opp-hz = /bits/ 64 <1296000000>;
opp-microvolt = <1350000 1350000 1350000>;
@@ -349,6 +333,32 @@
};
};
+ dfi: dfi@ff610000 {
+ reg = <0x00 0xff610000 0x00 0x400>;
+ compatible = "rockchip,px30-dfi";
+ rockchip,pmu = <&pmugrf>;
+ status = "okay";
+ };
+
+ dmc: dmc {
+ compatible = "rockchip,px30-dmc";
+ devfreq-events = <&dfi>;
+ clocks = <&cru SCLK_DDRCLK>;
+ clock-names = "dmc_clk";
+ operating-points-v2 = <&dmc_opp_table>;
+ uptreshold = <40>;
+ downdifferential = <20>;
+ status = "okay";
+ };
+
+ dmc_opp_table: dmc_opp_table {
+ compatible = "operating-points-v2";
+ opp-924000000 {
+ opp-hz = /bits/ 64 <924000000>;
+ opp-microvolt = <1125000>;
+ };
+ };
+
pmugrf: syscon@ff010000 {
compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff010000 0x0 0x1000>;
@@ -1064,20 +1074,12 @@
gpu_opp_table: opp-table-1 {
compatible = "operating-points-v2";
- opp-200000000 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <950000>;
- };
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <975000>;
- };
opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1050000>;
};
- opp-480000000 {
- opp-hz = /bits/ 64 <480000000>;
+ opp-440000000 {
+ opp-hz = /bits/ 64 <440000000>;
opp-microvolt = <1125000>;
};
};
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts linux/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts 2024-01-17 03:47:10.078350209 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts 2024-01-17 03:59:58.108276677 +0000
@@ -12,6 +12,25 @@
model = "Anbernic RG351M";
compatible = "anbernic,rg351m", "rockchip,rk3326";
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3500000>;
+ charge-term-current-microamp = <350000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <180000>;
+ voltage-max-design-microvolt = <4100000>;
+ voltage-min-design-microvolt = <3500000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+ <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+ <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+ <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+ <3574170 0>;
+ };
+
vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm0 0 1000000 0>;
@@ -19,17 +38,21 @@
};
};
-/delete-node/ &builtin_gamepad;
/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
&internal_display {
compatible = "elida,kd35t133";
iovcc-supply = <&vcc_lcd>;
vdd-supply = <&vcc_lcd>;
+ rotation = <270>;
};
&pwm0 {
status = "okay";
};
-/delete-node/ &rk817_charger;
+&rk817_charger {
+ /* This device does not have a current sense resistor */
+ //rockchip,resistor-sense-micro-ohms = <0>;
+ monitored-battery = <&battery>;
+};
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts linux/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts 1970-01-01 00:00:00.000000000 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts 2024-01-17 03:59:58.108276677 +0000
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+ model = "Anbernic RG351V";
+ compatible = "anbernic,rg351v", "rockchip,rk3326";
+
+ aliases {
+ mmc0 = &sdio;
+ mmc1 = &sdmmc;
+ };
+
+ gpio-keys-vol {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-0 = <&btn_pins_vol>;
+ pinctrl-names = "default";
+
+ button-vol-down {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-volume-up {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3500000>;
+ charge-term-current-microamp = <350000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <180000>;
+ voltage-max-design-microvolt = <4100000>;
+ voltage-min-design-microvolt = <3500000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+ <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+ <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+ <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+ <3574170 0>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm0 0 1000000 0>;
+ pwm-names = "enable";
+ };
+};
+
+/* conflicts with pwm vibration motor */
+/delete-node/ &vcc_host;
+
+/* Device only has 1 LED compared to Odroid Go Advance */
+/delete-node/ &gpio_led;
+
+&internal_display {
+ compatible = "anbernic,rg351v-panel", "newvision,nv3051d";
+ iovcc-supply = <&vcc_lcd>;
+ vdd-supply = <&vcc_lcd>;
+};
+
+&io_domains {
+ vccio1-supply = <&vccio_sd>;
+};
+
+/delete-node/ &pwm_led;
+
+&pwm0 {
+ status = "okay";
+};
+
+/delete-node/ &pwm3;
+
+&rk817_charger {
+ /* This device does not have a current sense resistor */
+ rockchip,resistor-sense-micro-ohms = <0>;
+ monitored-battery = <&battery>;
+};
+
+&sdio {
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&vcc_sd {
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <1800000>;
+};
+
+&vccio_sd {
+ regulator-max-microvolt = <1800000>;
+};
+
+&pinctrl {
+ btns {
+ btn_pins_vol: btn-pins-vol {
+ rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-magicx-xu10.dts 1969-12-31 19:00:00.000000000 -0500
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-magicx-xu10.dts 2024-01-18 16:30:20.464866143 -0500
@@ -0,0 +1,848 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3326.dtsi"
+
+/ {
+ model = "MagicX XU10";
+ compatible = "magicx,xu10", "rockchip,rk3326";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xff160000 swiotlb=1 console=ttyFIQ0 rw root=PARTUUID=614e0000-0000 rootwait";
+ };
+
+ fiq-debugger {
+ compatible = "rockchip,fiq-debugger";
+ rockchip,serial-id = <2>;
+ rockchip,wake-irq = <0>;
+ /* If enable uart uses irq instead of fiq */
+ rockchip,irq-mode-enable = <0>;
+ rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ power-supply = <&vcc_bl>;
+ pwms = <&pwm1 0 62745 0>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <128>;
+ };
+
+ joypad: xu10-joypad {
+ compatible = "xu10-joypad";
+
+ joypad-name = "XU10 Gamepad";
+ joypad-product = <0x0200>;
+ joypad-revision = <0x0010>;
+
+ status = "okay";
+ /*
+ - xu10-joypad sysfs list -
+ * for poll device interval(ms)
+ /sys/devices/platform/odroidgo3_joypad/poll_interval [rw]
+ ex) echo 20 > poll_interval
+ * for button-adc-fuzz
+ /sys/devices/platform/odroidgo3_joypad/adc_fuzz [r]
+ * for button-adc-flat
+ /sys/devices/platform/odroidgo3_joypad/adc_flat [r]
+
+ * for report control(1:enable, 0:disable)
+ /sys/devices/platform/odroidgo3_joypad/enable [rw]
+ * for adc calibration value setup(current adcs value -> cal value)
+ /sys/devices/platform/odroidgo3_joypad/adc_cal [rw]
+ ex) echo 0 > adc_cal
+ * for amux data debug
+ * Joypad driver is disabled when using this sysfs.
+ /sys/devices/platform/odroidgo3_joypad/amux_debug [rw]
+ ex) echo 0 > amux_debug --> select amux channel
+ ex) cat amux_debug --> get adc data of seleted channel
+ */
+
+ /* gpio pincontrol setup */
+ pinctrl-names = "default";
+ pinctrl-0 = <&btn_pins>;
+
+ /* Analog mux define */
+ io-channel-names = "joy_left", "joy_right";
+ io-channels = <&saradc 1>, <&saradc 2>;
+
+ /* adc mux channel count */
+ amux-count = <4>;
+
+ /* adc mux select(a,b) gpio */
+ amux-a-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+ amux-b-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+
+ /* adc mux enable gpio */
+ amux-en-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+
+ /* adc calculate scale */
+ button-adc-scale = <2>;
+
+ /* adc deadzone range */
+ button-adc-deadzone = <180>;
+
+ /*
+ specifies fuzz value that is used to filter noise from
+ the event stream.
+ */
+ button-adc-fuzz = <32>;
+ button-adc-flat = <32>;
+
+ /*
+ Analog Stick data tuning value(precent)
+ p = positive direction, n = negative direction
+ report value = (real_adc_data * tuning_value) / 100
+ */
+ abs_x-p-tuning = <200>;
+ abs_x-n-tuning = <200>;
+
+ abs_y-p-tuning = <200>;
+ abs_y-n-tuning = <200>;
+
+ abs_rx-p-tuning = <200>;
+ abs_rx-n-tuning = <200>;
+
+ abs_ry-p-tuning = <200>;
+ abs_ry-n-tuning = <200>;
+
+ /* poll device interval (ms), adc read interval */
+ poll-interval = <10>;
+ btn-lr-to-absx;
+ btn-ud-to-absy;
+
+ /* gpio button auto repeat set value : default disable */
+ /*
+ autorepeat;
+ */
+
+ /*
+ *** MagicX XU10 - layoout ***
+ |-------------------------------|
+ | sw14 sw17 sw16 sw15 |
+ |-----|-------------------|-----|
+ | | | |
+ |vol+ | | sw13|
+ |vol- | | |
+ | | LCD Display | |
+ | | | |
+ | | | |
+ | |-------------------| |
+ | sw9 sw10 |
+ | |
+ | sw1 sw7 |
+ | sw3 sw4 sw8 sw6 |
+ | sw2 sw5 |
+ | |
+ | sw11 sw12 |
+ | |
+ |-------|---------------|-------|
+ */
+
+ /*
+ joypad driver is poll-device driver.
+ poll-device is does not support wakeup-source.
+ */
+
+ sw1 {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-UP";
+ linux,code = <BTN_DPAD_UP>; // 0x220
+ };
+ sw2 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>; // 0x221
+ };
+ sw3 {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>; // 0x222
+ };
+ sw4 {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>; // 0x223
+ };
+ sw5 {
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-A";
+ linux,code = <BTN_SOUTH>; // 0x130
+ };
+ sw6 {
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-B";
+ linux,code = <BTN_EAST>; // 0x131
+ };
+ sw7 {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-Y";
+ linux,code = <BTN_NORTH>; // 0x133
+ };
+ sw8 {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-X";
+ linux,code = <BTN_WEST>; // 0x134
+ };
+ sw9 {
+ gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-SELECT";
+ linux,code = <BTN_SELECT>; // 0x13a
+ };
+ sw10 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-START";
+ linux,code = <BTN_START>; // 0x13b
+ };
+ sw11 {
+ gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-THUMBL";
+ linux,code = <BTN_THUMBL>; // 0x13d
+ };
+ sw12 {
+ gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-THUMBR";
+ linux,code = <BTN_THUMBR>; // 0x13e
+ };
+ sw13 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-G";
+ linux,code = <BTN_TRIGGER_HAPPY1>; // 0x2c0
+ };
+ sw14 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-LEFT";
+ linux,code = <BTN_TL>; // 0x136
+ };
+ sw15 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-RIGHT";
+ linux,code = <BTN_TR>; // 0x137
+ };
+ sw16 {
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-RIGHT2";
+ linux,code = <BTN_TR2>; // 0x139
+ };
+ sw17 {
+ gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-LEFT2";
+ linux,code = <BTN_TL2>; // 0x138
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3000000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <134000>;
+ voltage-max-design-microvolt = <4100000>;
+ voltage-min-design-microvolt = <3500000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 =
+ <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+ <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+ <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+ <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+ <3574170 0>;
+ };
+
+ gpio-keys-vol {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-0 = <&btn_pins_vol>;
+ pinctrl-names = "default";
+
+ button-vol-down {
+ gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEDOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-vol-up {
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "VOLUMEUP";
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ /* led-1 is wired directly to output of always-on regulator */
+
+ leds: gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&led_pins>;
+ pinctrl-names = "default";
+
+ green_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ };
+
+ amber_led: led-1 {
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_CHARGING;
+ gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+ retain-state-suspended;
+ };
+
+ red_led: led-2 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ rk817-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rk817_int";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Speaker";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Speaker", "SPKO";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_2ch>;
+ };
+ };
+
+ vccsys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v8_sys";
+ regulator-always-on;
+ regulator-min-microvolt = <3800000>;
+ regulator-max-microvolt = <3800000>;
+ };
+
+ vcc_host: vcc_host {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&usb_midu>;
+ };
+};
+
+&dmc {
+ center-supply = <&vdd_logic>;
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+ assigned-clocks = <&cru PLL_NPLL>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+ assigned-clock-rates = <1188000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dsi {
+ status = "okay";
+
+ ports {
+ mipi_out: port@1 {
+ reg = <1>;
+
+ mipi_out_panel: endpoint {
+ remote-endpoint = <&mipi_in_panel>;
+ };
+ };
+ };
+
+ internal_display: panel@0 {
+ compatible = "magicx,xu10-panel", "sitronix,st7703";
+ iovcc-supply = <&vcc_lcd>;
+ vdd-supply = <&vcc_lcd>;
+ reg = <0>;
+ backlight = <&backlight>;
+ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+
+ port {
+ mipi_in_panel: endpoint {
+ remote-endpoint = <&mipi_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi_dphy {
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-falling-time-ns = <16>;
+ i2c-scl-rising-time-ns = <280>;
+ status = "okay";
+
+ rk817: pmic@20 {
+ compatible = "rockchip,rk817";
+ reg = <0x20>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+ clock-output-names = "rk808-clkout1", "xin32k";
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S1_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ #sound-dai-cells = <0>;
+
+ vcc1-supply = <&vccsys>;
+ vcc2-supply = <&vccsys>;
+ vcc3-supply = <&vccsys>;
+ vcc4-supply = <&vccsys>;
+ vcc5-supply = <&vccsys>;
+ vcc6-supply = <&vccsys>;
+ vcc7-supply = <&vcc_3v0>;
+ vcc8-supply = <&vccsys>;
+ vcc9-supply = <&usb_midu>;
+
+ regulators {
+ vdd_logic: DCDC_REG1 {
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_3v0: DCDC_REG4 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v0_dvp:LDO_REG1 {
+ regulator-name = "vcc3v0_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_1v0: LDO_REG3 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc3v0_pmu: LDO_REG4 {
+ regulator-name = "vcc3v0_pmu";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG6 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_bl: LDO_REG7 {
+ regulator-name = "vcc_bl";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_lcd: LDO_REG8 {
+ regulator-name = "vcc_lcd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <2800000>;
+ };
+ };
+
+ LDO_REG9 {
+ /* unused */
+ };
+
+ usb_midu: BOOST {
+ regulator-name = "usb_midu";
+ regulator-min-microvolt = <4700000>;
+ regulator-max-microvolt = <5400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ };
+
+ rk817_charger: charger {
+ monitored-battery = <&battery>;
+ rockchip,resistor-sense-micro-ohms = <10000>;
+ rockchip,sleep-enter-current-microamp = <300000>;
+ rockchip,sleep-filter-current-microamp = <100000>;
+ };
+
+ rk817_codec: codec {
+ rockchip,mic-in-differential;
+ };
+ };
+};
+
+/* I2S 1 Channel Used Header(P2):1(GPIO2.C3),2(.C2), 3(.C1), 4(.C5), 5(.C4) */
+&i2s1_2ch {
+ status = "okay";
+ #sound-dai-cells = <0>;
+};
+
+&io_domains {
+ vccio1-supply = <&vcc_1v8>;
+ vccio2-supply = <&vccio_sd>;
+ vccio3-supply = <&vcc3v0_dvp>;
+ vccio4-supply = <&vcc_3v0>;
+ vccio5-supply = <&vcc_3v0>;
+ vccio6-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&isp {
+ status = "okay";
+};
+
+&isp_mmu {
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmuio1-supply = <&vcc3v0_pmu>;
+ pmuio2-supply = <&vcc3v0_pmu>;
+ status = "okay";
+};
+
+&csi_dphy {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> ff370000 PD_SDCARD CD GPIO <]*/
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ supports-sd;
+ card-detect-delay = <200>;
+ cd-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&tsadc {
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+
+ u2phy_host: host-port {
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "disabled";
+ };
+};
+
+/* FIQ Header(P2): 2(RXD:GPIO2.B4),3(TXD:.B6) */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>;
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&pinctrl {
+ btns {
+ btn_pins: btn-pins {
+ rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ btn_pins_vol: btn-pins-vol {
+ rockchip,pins =
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ gpio-led {
+ led_pins: led-pins {
+ rockchip,pins =
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ dc_det: dc-det {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pmic_int: pmic-int {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>;
+ };
+ };
+};
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi 2024-01-17 03:47:10.078350209 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi 2024-01-17 03:59:58.108276677 +0000
@@ -25,93 +25,40 @@
compatible = "pwm-backlight";
power-supply = <&vcc_bl>;
pwms = <&pwm1 0 25000 0>;
- };
-
- builtin_gamepad: gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&btn_pins>;
-
- button-sw1 {
- gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
- label = "DPAD-UP";
- linux,code = <BTN_DPAD_UP>;
- };
- button-sw2 {
- gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
- label = "DPAD-DOWN";
- linux,code = <BTN_DPAD_DOWN>;
- };
- button-sw3 {
- gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
- label = "DPAD-LEFT";
- linux,code = <BTN_DPAD_LEFT>;
- };
- button-sw4 {
- gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
- label = "DPAD-RIGHT";
- linux,code = <BTN_DPAD_RIGHT>;
- };
- button-sw5 {
- gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "BTN-A";
- linux,code = <BTN_EAST>;
- };
- button-sw6 {
- gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "BTN-B";
- linux,code = <BTN_SOUTH>;
- };
- button-sw7 {
- gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "BTN-Y";
- linux,code = <BTN_WEST>;
- };
- button-sw8 {
- gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
- label = "BTN-X";
- linux,code = <BTN_NORTH>;
- };
- btn_f1: button-sw9 {
- gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
- label = "F1";
- linux,code = <BTN_TRIGGER_HAPPY1>;
- };
- btn_f2: button-sw10 {
- gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
- label = "F2";
- linux,code = <BTN_TRIGGER_HAPPY2>;
- };
- btn_f3: button-sw11 {
- gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
- label = "F3";
- linux,code = <BTN_TRIGGER_HAPPY3>;
- };
- btn_f4: button-sw12 {
- gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
- label = "F4";
- linux,code = <BTN_TRIGGER_HAPPY4>;
- };
- btn_f5: button-sw13 {
- gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
- label = "F5";
- linux,code = <BTN_TRIGGER_HAPPY5>;
- };
- btn_f6: button-sw14 {
- gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "F6";
- linux,code = <BTN_TRIGGER_HAPPY6>;
- };
- button-sw15 {
- gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
- label = "TOP-LEFT";
- linux,code = <BTN_TL>;
- };
- button-sw16 {
- gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
- label = "TOP-RIGHT";
- linux,code = <BTN_TR>;
- };
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255>;
+ default-brightness-level = <128>;
};
/* led-1 is wired directly to output of always-on regulator */
@@ -187,6 +134,10 @@
};
};
+&dmc {
+ center-supply = <&vdd_logic>;
+};
+
&cpu0 {
cpu-supply = <&vdd_arm>;
};
@@ -236,7 +187,6 @@
reg = <0>;
backlight = <&backlight>;
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
- rotation = <270>;
port {
mipi_in_panel: endpoint {
@@ -271,6 +221,7 @@
clocks = <&cru SCLK_I2S1_OUT>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+ rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
#sound-dai-cells = <0>;
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts 2024-01-17 03:47:10.078350209 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts 2024-01-17 03:59:58.108276677 +0000
@@ -16,31 +16,187 @@
mmc1 = &sdio;
};
- analog_sticks: adc-joystick {
- compatible = "adc-joystick";
- io-channels = <&saradc 1>,
- <&saradc 2>;
- poll-interval = <60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis@0 {
- reg = <0>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <172 772>;
- linux,code = <ABS_X>;
- };
+ gpio_keys: volume-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <5>;
+ autorepeat;
+
+ volume-up-button {
+ label = "VOLUME-UP";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+
+ };
+ volume-down-button {
+ label = "VOLUME-DOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
- axis@1 {
- reg = <1>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <278 815>;
- linux,code = <ABS_Y>;
};
};
+ joypad: odroidgo2-joypad {
+ compatible = "odroidgo2-v11-joypad";
+
+ /*
+ - odroidgo2-joypad sysfs list -
+ * for poll device interval(ms)
+ /sys/devices/platform/odroidgo2_joypad/poll_interval [rw]
+ * for button-adc-fuzz
+ /sys/devices/platform/odroidgo2_joypad/adc_fuzz [r]
+ * for button-adc-flat
+ /sys/devices/platform/odroidgo2_joypad/adc_flat [r]
+
+ * for report control(1:enable, 0:disable)
+ /sys/devices/platform/odroidgo2_joypad/enable [rw]
+ * for adc calibration value setup(1:current adcs value -> cal value)
+ /sys/devices/platform/odroidgo2_joypad/adc_cal [rw]
+ */
+
+ /* gpio pincontrol setup */
+ pinctrl-names = "default";
+ pinctrl-0 = <&btn_pins>;
+
+ /* JOY_X, JOY_Y Channel define */
+ io-channel-names = "joy_x", "joy_y";
+ io-channels = <&saradc 1>, <&saradc 2>;
+
+ /* adc channel count */
+ button-adc-count = <2>;
+
+ /* adc calculate scale */
+ button-adc-scale = <2>;
+
+ /* adc deadzone range */
+ button-adc-deadzone = <20>;
+
+ /*
+ joy-stick voltage range
+ /sys/devices/platform/ff288000.saradc/iio:device0
+ adc-x : in_voltage1_raw
+ adc-y : in_voltage2_raw
+
+ range calculate.
+ (adc raw max value - adc raw min value) * scale * 1.7515
+ */
+ button-adc-x-range = <1800>;
+ button-adc-y-range = <1800>;
+
+ /*
+ specifies fuzz value that is used to filter noise from
+ the event stream.
+ */
+ button-adc-fuzz = <32>;
+ button-adc-flat = <32>;
+
+ /* poll device interval (ms), adc read interval */
+ poll-interval = <10>;
+
+ /* gpio button auto repeat set value : default disable */
+ /*
+ autorepeat;
+ */
+
+ /*
+ *** ODROIDGO2-Advance Switch layoout ***
+ |------------------------------------------------|
+ | sw15 sw16 |
+ | sw20 sw21 |
+ |------------------------------------------------|
+ | sw1 |-------------------| sw8 |
+ | sw3 sw4 | | sw7 sw5 |
+ | sw2 | LCD Display | sw6 |
+ | | | |
+ | |-------------------| |
+ | sw9 sw10 vol- vol+ sw13 sw14 |
+ |------------------------------------------------|
+ */
+ /*
+ joypad driver is poll-device driver.
+ poll-device is does not support wakeup-source.
+ */
+ sw1 {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-UP";
+ linux,code = <BTN_DPAD_UP>; // 0x220
+ };
+ sw2 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>; // 0x221
+ };
+ sw3 {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>; // 0x222
+ };
+ sw4 {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>; // 0x223
+ };
+ sw5 {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO KEY BTN-A";
+ linux,code = <BTN_EAST>; // 0x131
+ };
+ sw6 {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-B";
+ linux,code = <BTN_SOUTH>; // 0x130
+ };
+ sw7 {
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-Y";
+ linux,code = <BTN_WEST>; // 0x134
+ };
+ sw8 {
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-X";
+ linux,code = <BTN_NORTH>; // 0x133
+ };
+ sw9 {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "GPIO F1";
+ linux,code = <BTN_TRIGGER_HAPPY1>; // 0x2c0
+ };
+ sw10 {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "GPIO F2";
+ linux,code = <BTN_TRIGGER_HAPPY2>; // 0x2c1
+ };
+ sw13 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "GPIO F5";
+ linux,code = <BTN_TRIGGER_HAPPY5>; // 0x2c4
+ };
+ sw14 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO F6";
+ linux,code = <BTN_TRIGGER_HAPPY6>; // 0x13c
+ };
+ sw15 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT";
+ linux,code = <BTN_TL>; // 0x02
+ };
+ sw16 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT";
+ linux,code = <BTN_TR>; // 0x05
+ };
+ sw20 {
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT2";
+ linux,code = <BTN_TL2>;
+ };
+ sw21 {
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT2";
+ linux,code = <BTN_TR2>;
+ };
+ };
+
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3000000>;
@@ -65,19 +221,8 @@
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pins>;
reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
- };
-};
-
-&builtin_gamepad {
- button-sw20 {
- gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- label = "TOP-LEFT 2";
- linux,code = <BTN_TL2>;
- };
- button-sw21 {
- gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
- label = "TOP-RIGHT 2";
- linux,code = <BTN_TR2>;
+ post-power-on-delay-ms = <300>;
+ power-off-delay-us = <200000>;
};
};
@@ -85,6 +230,7 @@
compatible = "elida,kd35t133";
iovcc-supply = <&vcc_lcd>;
vdd-supply = <&vcc_lcd>;
+ rotation = <270>;
};
&rk817 {
@@ -93,9 +239,11 @@
regulator-name = "vcc_wifi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
regulator-state-mem {
- regulator-on-in-suspend;
+ regulator-off-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
@@ -112,16 +260,15 @@
cap-sdio-irq;
disable-wp;
keep-power-in-suspend;
- mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
vmmc-supply = <&vcc_wifi>;
- #address-cells = <1>;
- #size-cells = <0>;
+ mmc-pwrseq = <&wifi_pwrseq>;
status = "okay";
esp8089: wifi@1 {
compatible = "esp,esp8089";
reg = <1>;
+ esp,crystal-26M-en = <1>;
};
};
@@ -138,8 +285,6 @@
<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
- <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts 2024-01-17 03:47:10.078350209 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts 2024-01-17 03:59:58.108276677 +0000
@@ -12,30 +12,175 @@
model = "ODROID-GO Advance";
compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
- analog_sticks: adc-joystick {
- compatible = "adc-joystick";
- io-channels = <&saradc 1>,
- <&saradc 2>;
- poll-interval = <60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis@0 {
- reg = <0>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <172 772>;
- linux,code = <ABS_X>;
- };
-
- axis@1 {
- reg = <1>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <278 815>;
- linux,code = <ABS_Y>;
- };
- };
+ gpio_keys: volume-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <5>;
+ autorepeat;
+
+ volume-up-button {
+ label = "VOLUME-UP";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+
+ };
+ volume-down-button {
+ label = "VOLUME-DOWN";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+
+ };
+ };
+
+ joypad: odroidgo2-joypad {
+ compatible = "odroidgo2-joypad";
+
+ /*
+ - odroidgo2-joypad sysfs list -
+ * for poll device interval(ms)
+ /sys/devices/platform/odroidgo2_joypad/poll_interval [rw]
+ * for button-adc-fuzz
+ /sys/devices/platform/odroidgo2_joypad/adc_fuzz [r]
+ * for button-adc-flat
+ /sys/devices/platform/odroidgo2_joypad/adc_flat [r]
+
+ * for report control(1:enable, 0:disable)
+ /sys/devices/platform/odroidgo2_joypad/enable [rw]
+ * for adc calibration value setup(1:current adcs value -> cal value)
+ /sys/devices/platform/odroidgo2_joypad/adc_cal [rw]
+ */
+
+ /* gpio pincontrol setup */
+ pinctrl-names = "default";
+ pinctrl-0 = <&btn_pins>;
+
+ /* JOY_X, JOY_Y Channel define */
+ io-channel-names = "joy_x", "joy_y";
+ io-channels = <&saradc 1>, <&saradc 2>;
+
+ /* adc channel count */
+ button-adc-count = <2>;
+
+ /* adc calculate scale */
+ button-adc-scale = <2>;
+
+ /* adc deadzone range */
+ button-adc-deadzone = <20>;
+
+ /*
+ joy-stick voltage range
+ /sys/devices/platform/ff288000.saradc/iio:device0
+ adc-x : in_voltage1_raw
+ adc-y : in_voltage2_raw
+
+ range calculate.
+ (adc raw max value - adc raw min value) * scale * 1.7515
+ */
+ button-adc-x-range = <1800>;
+ button-adc-y-range = <1800>;
+
+ /*
+ specifies fuzz value that is used to filter noise from
+ the event stream.
+ */
+ button-adc-fuzz = <32>;
+ button-adc-flat = <32>;
+
+ /* poll device interval (ms), adc read interval */
+ poll-interval = <10>;
+
+ /* gpio button auto repeat set value : default disable */
+ /*
+ autorepeat;
+ */
+
+ /*
+ *** ODROIDGO2-Advance Switch layoout ***
+ |------------------------------------------------|
+ | sw15 sw16 |
+ |------------------------------------------------|
+ | sw1 |-------------------| sw8 |
+ | sw3 sw4 | | sw7 sw5 |
+ | sw2 | LCD Display | sw6 |
+ | | | |
+ | |-------------------| |
+ | sw9 sw10 vol- vol+ sw13 sw14 |
+ |------------------------------------------------|
+ */
+ /*
+ joypad driver is poll-device driver.
+ poll-device is does not support wakeup-source.
+ */
+ sw1 {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-UP";
+ linux,code = <BTN_DPAD_UP>; // 0x220
+ };
+ sw2 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>; // 0x221
+ };
+ sw3 {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>; // 0x222
+ };
+ sw4 {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>; // 0x223
+ };
+ sw5 {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO KEY BTN-A";
+ linux,code = <BTN_EAST>; // 0x131
+ };
+ sw6 {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-B";
+ linux,code = <BTN_SOUTH>; // 0x130
+ };
+ sw7 {
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-Y";
+ linux,code = <BTN_WEST>; // 0x134
+ };
+ sw8 {
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-X";
+ linux,code = <BTN_NORTH>; // 0x133
+ };
+ sw9 {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "GPIO F1";
+ linux,code = <BTN_TRIGGER_HAPPY1>; // 0x2c0
+ };
+ sw10 {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "GPIO F2";
+ linux,code = <BTN_TRIGGER_HAPPY2>; // 0x2c1
+ };
+ sw13 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "GPIO F5";
+ linux,code = <BTN_TRIGGER_HAPPY5>; // 0x2c4
+ };
+ sw14 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO F6";
+ linux,code = <BTN_TRIGGER_HAPPY6>; // 0x13c
+ };
+ sw15 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT";
+ linux,code = <BTN_TL>; // 0x02
+ };
+ sw16 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT";
+ linux,code = <BTN_TR>; // 0x05
+ };
+ };
battery: battery {
compatible = "simple-battery";
@@ -61,8 +206,30 @@
compatible = "elida,kd35t133";
iovcc-supply = <&vcc_lcd>;
vdd-supply = <&vcc_lcd>;
+ rotation = <270>;
};
&rk817_charger {
monitored-battery = <&battery>;
};
+
+&pinctrl {
+ btns {
+ btn_pins: btn-pins {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts 2024-01-17 03:47:10.078350209 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts 2024-01-17 03:59:58.108276677 +0000
@@ -12,67 +12,196 @@
model = "ODROID-GO Super";
compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
- joystick_mux_controller: mux-controller {
- compatible = "gpio-mux";
- pinctrl = <&mux_en_pins>;
- #mux-control-cells = <0>;
+ joypad: odroidgo3-joypad {
+ compatible = "odroidgo3-joypad";
+ status = "okay";
+ /*
+ - odroidgo3-joypad sysfs list -
+ * for poll device interval(ms)
+ /sys/devices/platform/odroidgo3_joypad/poll_interval [rw]
+ ex) echo 20 > poll_interval
+ * for button-adc-fuzz
+ /sys/devices/platform/odroidgo3_joypad/adc_fuzz [r]
+ * for button-adc-flat
+ /sys/devices/platform/odroidgo3_joypad/adc_flat [r]
+
+ * for report control(1:enable, 0:disable)
+ /sys/devices/platform/odroidgo3_joypad/enable [rw]
+ * for adc calibration value setup(current adcs value -> cal value)
+ /sys/devices/platform/odroidgo3_joypad/adc_cal [rw]
+ ex) echo 0 > adc_cal
+ * for amux data debug
+ * Joypad driver is disabled when using this sysfs.
+ /sys/devices/platform/odroidgo3_joypad/amux_debug [rw]
+ ex) echo 0 > amux_debug --> select amux channel
+ ex) cat amux_debug --> get adc data of seleted channel
+ */
+
+ /* gpio pincontrol setup */
+ pinctrl-names = "default";
+ pinctrl-0 = <&btn_pins>;
- mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
- <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
- };
-
- joystick_mux: adc-mux {
- compatible = "io-channel-mux";
+ /* Analog mux define */
+ io-channel-names = "amux_adc";
io-channels = <&saradc 1>;
- io-channel-names = "parent";
- #io-channel-cells = <1>;
-
- mux-controls = <&joystick_mux_controller>;
- channels = "0", "1", "2", "3";
- };
- analog_sticks: adc-joystick {
- compatible = "adc-joystick";
- io-channels = <&joystick_mux 0>,
- <&joystick_mux 1>,
- <&joystick_mux 2>,
- <&joystick_mux 3>;
- poll-interval = <60>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- axis@0 {
- reg = <0>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <180 800>;
- linux,code = <ABS_X>;
- };
-
- axis@1 {
- reg = <1>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <180 800>;
- linux,code = <ABS_RX>;
- };
-
- axis@2 {
- reg = <2>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <180 800>;
- linux,code = <ABS_Y>;
- };
-
- axis@3 {
- reg = <3>;
- abs-flat = <10>;
- abs-fuzz = <10>;
- abs-range = <180 800>;
- linux,code = <ABS_RY>;
- };
- };
+ /* adc mux channel count */
+ amux-count = <4>;
+ /* adc mux select(a,b) gpio */
+ amux-a-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+ amux-b-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ /* adc mux enable gpio */
+ amux-en-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+
+ /* adc calculate scale */
+ button-adc-scale = <2>;
+
+ /* adc deadzone range */
+ button-adc-deadzone = <64>;
+
+ /*
+ specifies fuzz value that is used to filter noise from
+ the event stream.
+ */
+ button-adc-fuzz = <32>;
+ button-adc-flat = <32>;
+
+ /*
+ Analog Stick data tuning value(precent)
+ p = positive direction, n = negative direction
+ report value = (real_adc_data * tuning_value) / 100
+ */
+ abs_x-p-tuning = <180>;
+ abs_x-n-tuning = <180>;
+
+ abs_y-p-tuning = <180>;
+ abs_y-n-tuning = <170>;
+
+ abs_rx-p-tuning = <180>;
+ abs_rx-n-tuning = <180>;
+
+ abs_ry-p-tuning = <180>;
+ abs_ry-n-tuning = <170>;
+
+ /* poll device interval (ms), adc read interval */
+ poll-interval = <10>;
+
+ /* gpio button auto repeat set value : default disable */
+ /*
+ autorepeat;
+ */
+
+ /*
+ *** ODROIDGO3-Advance Switch layoout ***
+ |------------------------------------------------|
+ | sw15 sw21 sw10 sw9 sw20 sw16 |
+ |------------------------------------------------|
+ | sw19 sw22 |
+ | |-------------------| |
+ | sw1 | | sw8 |
+ | sw3 sw4 | | sw7 sw5 |
+ | sw2 | LCD Display | sw6 |
+ | | | |
+ | | | |
+ | |-------------------| |
+ | sw11 sw12 | sd-slot | sw13 sw14 |
+ |-------------------| |------------------|
+ */
+ /*
+ joypad driver is poll-device driver.
+ poll-device is does not support wakeup-source.
+ */
+ sw1 {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-UP";
+ linux,code = <BTN_DPAD_UP>; // 0x220
+ };
+ sw2 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>; // 0x221
+ };
+ sw3 {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>; // 0x222
+ };
+ sw4 {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>; // 0x223
+ };
+ sw5 {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO KEY BTN-A";
+ linux,code = <BTN_EAST>; // 0x131
+ };
+ sw6 {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-B";
+ linux,code = <BTN_SOUTH>; // 0x130
+ };
+ sw7 {
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-Y";
+ linux,code = <BTN_WEST>; // 0x134
+ };
+ sw8 {
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-X";
+ linux,code = <BTN_NORTH>; // 0x133
+ };
+ sw11 {
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO F3";
+ linux,code = <BTN_TRIGGER_HAPPY3>; // 0x2c2
+ };
+ sw12 {
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "GPIO F4";
+ linux,code = <BTN_TRIGGER_HAPPY4>; // 0x2c3
+ };
+ sw13 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "GPIO F5";
+ linux,code = <BTN_TRIGGER_HAPPY5>; // 0x2c4
+ };
+ sw14 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO F6";
+ linux,code = <BTN_TRIGGER_HAPPY6>; // 0x13c
+ };
+ sw15 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT";
+ linux,code = <BTN_TL>; // 0x02
+ };
+ sw16 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT";
+ linux,code = <BTN_TR>; // 0x05
+ };
+ sw19 {
+ gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+ label = "GPIO F1";
+ linux,code = <BTN_TRIGGER_HAPPY1>;
+ };
+ sw20 {
+ gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT2";
+ linux,code = <BTN_TR2>;
+ };
+ sw21 {
+ gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT2";
+ linux,code = <BTN_TL2>;
+ };
+ sw22 {
+ gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO F2";
+ linux,code = <BTN_TRIGGER_HAPPY2>;
+ };
+ };
battery: battery {
compatible = "simple-battery";
@@ -113,39 +242,12 @@
};
};
-/* f1 and f2 conflict with volume buttons */
-/delete-node/ &btn_f1;
-/delete-node/ &btn_f2;
-
-&builtin_gamepad {
- button-sw19 {
- gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
- label = "SELECT";
- linux,code = <BTN_SELECT>;
- };
- /* note that TR2 and TL2 are swapped */
- button-sw20 {
- gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- label = "TOP-RIGHT 2";
- linux,code = <BTN_TR2>;
- };
- button-sw21 {
- gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
- label = "TOP-LEFT 2";
- linux,code = <BTN_TL2>;
- };
- button-sw22 {
- gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
- label = "START";
- linux,code = <BTN_START>;
- };
-};
-
&internal_display {
compatible = "elida,kd50t048a", "sitronix,st7701";
reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
IOVCC-supply = <&vcc_lcd>;
VCC-supply = <&vcc_lcd>;
+ rotation = <270>;
};
&rk817_charger {
@@ -179,10 +281,4 @@
<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
-
- joystick {
- mux_en_pins: mux-pins {
- rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
- };
- };
};
diff -rupN linux.orig/arch/arm64/boot/dts/rockchip/rk3326-powkiddy-rgb10.dts linux/arch/arm64/boot/dts/rockchip/rk3326-powkiddy-rgb10.dts
--- linux.orig/arch/arm64/boot/dts/rockchip/rk3326-powkiddy-rgb10.dts 1970-01-01 00:00:00.000000000 +0000
+++ linux/arch/arm64/boot/dts/rockchip/rk3326-powkiddy-rgb10.dts 2024-01-17 03:59:58.108276677 +0000
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+ model = "Powkiddy RGB10";
+ compatible = "powkiddy,rk3326-rgb10", "rockchip,rk3326";
+
+ aliases {
+ mmc1 = &sdio;
+ };
+
+ joypad: odroidgo2-joypad {
+ compatible = "odroidgo2-v11-joypad";
+
+ /*
+ - odroidgo2-joypad sysfs list -
+ * for poll device interval(ms)
+ /sys/devices/platform/odroidgo2_joypad/poll_interval [rw]
+ * for button-adc-fuzz
+ /sys/devices/platform/odroidgo2_joypad/adc_fuzz [r]
+ * for button-adc-flat
+ /sys/devices/platform/odroidgo2_joypad/adc_flat [r]
+
+ * for report control(1:enable, 0:disable)
+ /sys/devices/platform/odroidgo2_joypad/enable [rw]
+ * for adc calibration value setup(1:current adcs value -> cal value)
+ /sys/devices/platform/odroidgo2_joypad/adc_cal [rw]
+ */
+
+ /* gpio pincontrol setup */
+ pinctrl-names = "default";
+ pinctrl-0 = <&btn_pins>;
+
+ /* JOY_X, JOY_Y Channel define */
+ io-channel-names = "joy_x", "joy_y";
+ io-channels = <&saradc 1>, <&saradc 2>;
+
+ /* adc channel count */
+ button-adc-count = <2>;
+
+ /* adc calculate scale */
+ button-adc-scale = <2>;
+
+ /* adc deadzone range */
+ button-adc-deadzone = <20>;
+
+ /*
+ joy-stick voltage range
+ /sys/devices/platform/ff288000.saradc/iio:device0
+ adc-x : in_voltage1_raw
+ adc-y : in_voltage2_raw
+
+ range calculate.
+ (adc raw max value - adc raw min value) * scale * 1.7515
+ */
+ button-adc-x-range = <1800>;
+ button-adc-y-range = <1800>;
+
+ /*
+ specifies fuzz value that is used to filter noise from
+ the event stream.
+ */
+ button-adc-fuzz = <32>;
+ button-adc-flat = <32>;
+
+ /* poll device interval (ms), adc read interval */
+ poll-interval = <10>;
+
+ /* gpio button auto repeat set value : default disable */
+ /*
+ autorepeat;
+ */
+
+ /*
+ *** RGB10 Switch layoout ***
+ |------------------------------------------------|
+ | sw15 sw16 |
+ | sw20 sw21 |
+ |------------------------------------------------|
+ | sw1 sw10 |-------------------| sw13 sw8 |
+ | sw3 sw4 | | sw7 sw5 |
+ | sw2 | LCD Display | sw6 |
+ | | | |
+ | |-------------------| |
+ |------------------------------------------------|
+ */
+ /*
+ joypad driver is poll-device driver.
+ poll-device is does not support wakeup-source.
+ */
+ sw1 {
+ gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-UP";
+ linux,code = <BTN_DPAD_UP>; // 0x220
+ };
+ sw2 {
+ gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-DOWN";
+ linux,code = <BTN_DPAD_DOWN>; // 0x221
+ };
+ sw3 {
+ gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-LEFT";
+ linux,code = <BTN_DPAD_LEFT>; // 0x222
+ };
+ sw4 {
+ gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
+ label = "GPIO DPAD-RIGHT";
+ linux,code = <BTN_DPAD_RIGHT>; // 0x223
+ };
+ sw5 {
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO KEY BTN-A";
+ linux,code = <BTN_EAST>; // 0x131
+ };
+ sw6 {
+ gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-B";
+ linux,code = <BTN_SOUTH>; // 0x130
+ };
+ sw7 {
+ gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-Y";
+ linux,code = <BTN_WEST>; // 0x134
+ };
+ sw8 {
+ gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO BTN-X";
+ linux,code = <BTN_NORTH>; // 0x133
+ };
+ sw9 {
+ gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
+ label = "GPIO F1";
+ linux,code = <BTN_TRIGGER_HAPPY1>; // 0x2c0
+ };
+ sw10 {
+ gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
+ label = "GPIO F2";
+ linux,code = <BTN_TRIGGER_HAPPY2>; // 0x2c1
+ };
+ sw13 {
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
+ label = "GPIO F5";
+ linux,code = <BTN_TRIGGER_HAPPY5>; // 0x2c4
+ };
+ sw14 {
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO F6";
+ linux,code = <BTN_TRIGGER_HAPPY6>; // 0x13c
+ };
+ sw15 {
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT";
+ linux,code = <BTN_TL>; // 0x02
+ };
+ sw16 {
+ gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT";
+ linux,code = <BTN_TR>; // 0x05
+ };
+ sw20 {
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-LEFT2";
+ linux,code = <BTN_TL2>;
+ };
+ sw21 {
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "GPIO TOP-RIGHT2";
+ linux,code = <BTN_TR2>;
+ };
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <2800000>;
+ charge-term-current-microamp = <280000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <180000>;
+ voltage-max-design-microvolt = <4100000>;
+ voltage-min-design-microvolt = <3500000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+ <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+ <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+ <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+ <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+ <3574170 0>;
+ };
+
+ wifi_pwrseq: wifi-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_pwrseq_pins>;
+ /*reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;*/
+ };
+};
+
+&internal_display {
+ compatible = "elida,kd35t133";
+ iovcc-supply = <&vcc_lcd>;
+ vdd-supply = <&vcc_lcd>;
+ rotation = <270>;
+};
+
+&rk817 {
+ regulators {
+ vcc_wifi: LDO_REG9 {
+ regulator-name = "vcc_wifi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&rk817_charger {
+ monitored-battery = <&battery>;
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ non-removable;
+ vmmc-supply = <&vcc_wifi>;
+ status = "okay";
+
+ esp8089: wifi@1 {
+ compatible = "esp,esp8089";
+ reg = <1>;
+ esp,crystal-26M-en = <2>;
+ };
+};
+
+&pinctrl {
+ btns {
+ btn_pins: btn-pins {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ wifi {
+ wifi_pwrseq_pins: wifi-pwrseq-pins {
+ rockchip,pins = /*<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,*/
+ <3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
Reference in a new issue View git blame Copy permalink