homebrew-core/Formula/valgrind.rb

712 lines
22 KiB
Ruby
Raw Normal View History

require 'formula'
2011-05-18 15:12:27 +00:00
require 'utils'
2011-03-10 05:11:03 +00:00
class Valgrind < Formula
homepage 'http://www.valgrind.org/'
head 'svn://svn.valgrind.org/valgrind/trunk'
2011-03-09 17:45:43 +00:00
url "http://valgrind.org/downloads/valgrind-3.6.1.tar.bz2"
md5 "2c3aa122498baecc9d69194057ca88f5"
depends_on 'pkg-config' => :build
2011-03-21 21:24:22 +00:00
fails_with_llvm "Makes applications segfault on startup", :build => 2326
skip_clean 'lib'
def patches
# Xcode 4 fix from upstream r11686
# https://bugs.kde.org/show_bug.cgi?id=267997
if MacOS.xcode_version >= "4.0" and not ARGV.build_head?
2011-05-18 15:12:27 +00:00
{ :p0 => DATA }
end
end
def install
# Remove when Xcode 4 fix is removed
system "autoreconf -ivf"
2010-08-24 17:28:40 +00:00
args = ["--prefix=#{prefix}", "--mandir=#{man}"]
2011-03-21 21:24:22 +00:00
args << "--enable-only64bit" << "--build=amd64-darwin" if MacOS.prefer_64_bit?
system "./configure", *args
system "make install"
end
end
__END__
Index: coregrind/fixup_macho_loadcmds.c
===================================================================
--- coregrind/fixup_macho_loadcmds.c (revision 0)
+++ coregrind/fixup_macho_loadcmds.c (revision 11686)
@@ -0,0 +1,605 @@
+
+/* Derived from Valgrind sources, coregrind/m_debuginfo/readmacho.c.
+ GPL 2+ therefore.
+
+ Can be compiled as either a 32- or 64-bit program (doesn't matter).
+*/
+
+/* What does this program do? In short it postprocesses tool
+ executables on MacOSX, after linking using /usr/bin/ld. This is so
+ as to work around a bug in the linker on Xcode 4.0.0 and Xcode
+ 4.0.1. Xcode versions prior to 4.0.0 are unaffected.
+
+ The tracking bug is https://bugs.kde.org/show_bug.cgi?id=267997
+
+ The bug causes 64-bit tool executables to segfault at startup,
+ because:
+
+ Comparing the MachO load commands vs a (working) tool executable
+ that was created by Xcode 3.2.x, it appears that the new linker has
+ partially ignored the build system's request to place the tool
+ executable's stack at a non standard location. The build system
+ tells the linker "-stack_addr 0x134000000 -stack_size 0x800000".
+
+ With the Xcode 3.2 linker those flags produce two results:
+
+ (1) A load command to allocate the stack at the said location:
+ Load command 3
+ cmd LC_SEGMENT_64
+ cmdsize 72
+ segname __UNIXSTACK
+ vmaddr 0x0000000133800000
+ vmsize 0x0000000000800000
+ fileoff 2285568
+ filesize 0
+ maxprot 0x00000007
+ initprot 0x00000003
+ nsects 0
+ flags 0x0
+
+ (2) A request (in LC_UNIXTHREAD) to set %rsp to the correct value
+ at process startup, 0x134000000.
+
+ With Xcode 4.0.1, (1) is missing but (2) is still present. The
+ tool executable therefore starts up with %rsp pointing to unmapped
+ memory and faults almost instantly.
+
+ The workaround implemented by this program is documented in comment
+ 8 of bug 267997, viz:
+
+ One really sick workaround is to observe that the executables
+ contain a redundant MachO load command:
+
+ Load command 2
+ cmd LC_SEGMENT_64
+ cmdsize 72
+ segname __LINKEDIT
+ vmaddr 0x0000000138dea000
+ vmsize 0x00000000000ad000
+ fileoff 2658304
+ filesize 705632
+ maxprot 0x00000007
+ initprot 0x00000001
+ nsects 0
+ flags 0x0
+
+ The described section presumably contains information intended for
+ the dynamic linker, but is irrelevant because this is a statically
+ linked executable. Hence it might be possible to postprocess the
+ executables after linking, to overwrite this entry with the
+ information that would have been in the missing __UNIXSTACK entry.
+ I tried this by hand (with a binary editor) earlier and got
+ something that worked.
+*/
+
+#define DEBUGPRINTING 0
+
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <fcntl.h>
+
+
+#undef PLAT_x86_darwin
+#undef PLAT_amd64_darwin
+
+#if defined(__APPLE__) && defined(__i386__)
+# define PLAT_x86_darwin 1
+#elif defined(__APPLE__) && defined(__x86_64__)
+# define PLAT_amd64_darwin 1
+#else
+# error "Can't be compiled on this platform"
+#endif
+
+#include <mach-o/loader.h>
+#include <mach-o/nlist.h>
+#include <mach-o/fat.h>
+#include <mach/i386/thread_status.h>
+
+
+typedef unsigned char UChar;
+typedef signed char Char;
+typedef char HChar; /* signfulness depends on host */
+
+typedef unsigned int UInt;
+typedef signed int Int;
+
+typedef unsigned char Bool;
+#define True ((Bool)1)
+#define False ((Bool)0)
+
+typedef unsigned long UWord;
+
+typedef UWord SizeT;
+typedef UWord Addr;
+
+typedef unsigned long long int ULong;
+typedef signed long long int Long;
+
+
+
+__attribute__((noreturn))
+void fail ( HChar* msg )
+{
+ fprintf(stderr, "fixup_macho_loadcmds: fail: %s\n", msg);
+ exit(1);
+}
+
+
+/*------------------------------------------------------------*/
+/*--- ---*/
+/*--- Mach-O file mapping/unmapping helpers ---*/
+/*--- ---*/
+/*------------------------------------------------------------*/
+
+typedef
+ struct {
+ /* These two describe the entire mapped-in ("primary") image,
+ fat headers, kitchen sink, whatnot: the entire file. The
+ image is mapped into img[0 .. img_szB-1]. */
+ UChar* img;
+ SizeT img_szB;
+ /* These two describe the Mach-O object of interest, which is
+ presumably somewhere inside the primary image.
+ map_image_aboard() below, which generates this info, will
+ carefully check that the macho_ fields denote a section of
+ memory that falls entirely inside img[0 .. img_szB-1]. */
+ UChar* macho_img;
+ SizeT macho_img_szB;
+ }
+ ImageInfo;
+
+
+Bool is_macho_object_file( const void* buf, SizeT szB )
+{
+ /* (JRS: the Mach-O headers might not be in this mapped data,
+ because we only mapped a page for this initial check,
+ or at least not very much, and what's at the start of the file
+ is in general a so-called fat header. The Mach-O object we're
+ interested in could be arbitrarily far along the image, and so
+ we can't assume its header will fall within this page.) */
+
+ /* But we can say that either it's a fat object, in which case it
+ begins with a fat header, or it's unadorned Mach-O, in which
+ case it starts with a normal header. At least do what checks we
+ can to establish whether or not we're looking at something
+ sane. */
+
+ const struct fat_header* fh_be = buf;
+ const struct mach_header_64* mh = buf;
+
+ assert(buf);
+ if (szB < sizeof(struct fat_header))
+ return False;
+ if (ntohl(fh_be->magic) == FAT_MAGIC)
+ return True;
+
+ if (szB < sizeof(struct mach_header_64))
+ return False;
+ if (mh->magic == MH_MAGIC_64)
+ return True;
+
+ return False;
+}
+
+
+/* Unmap an image mapped in by map_image_aboard. */
+static void unmap_image ( /*MOD*/ImageInfo* ii )
+{
+ Int r;
+ assert(ii->img);
+ assert(ii->img_szB > 0);
+ r = munmap( ii->img, ii->img_szB );
+ /* Do we care if this fails? I suppose so; it would indicate
+ some fairly serious snafu with the mapping of the file. */
+ assert( !r );
+ memset(ii, 0, sizeof(*ii));
+}
+
+
+/* Map a given fat or thin object aboard, find the thin part if
+ necessary, do some checks, and write details of both the fat and
+ thin parts into *ii. Returns 32 (and leaves the file unmapped) if
+ the thin part is a 32 bit file. Returns 64 if it's a 64 bit file.
+ Does not return on failure. Guarantees to return pointers to a
+ valid(ish) Mach-O image if it succeeds. */
+static Int map_image_aboard ( /*OUT*/ImageInfo* ii, HChar* filename )
+{
+ memset(ii, 0, sizeof(*ii));
+
+ /* First off, try to map the thing in. */
+ { SizeT size;
+ Int r, fd;
+ struct stat stat_buf;
+
+ r = stat(filename, &stat_buf);
+ if (r)
+ fail("Can't stat image (to determine its size)?!");
+ size = stat_buf.st_size;
+
+ fd = open(filename, O_RDWR, 0);
+ if (fd == -1)
+ fail("Can't open image for possible modification!");
+ if (DEBUGPRINTING)
+ printf("size %lu fd %d\n", size, fd);
+ void* v = mmap ( NULL, size, PROT_READ|PROT_WRITE,
+ MAP_FILE|MAP_SHARED, fd, 0 );
+ if (v == MAP_FAILED) {
+ perror("mmap failed");
+ fail("Can't mmap image for possible modification!");
+ }
+
+ close(fd);
+
+ ii->img = (UChar*)v;
+ ii->img_szB = size;
+ }
+
+ /* Now it's mapped in and we have .img and .img_szB set. Look for
+ the embedded Mach-O object. If not findable, unmap and fail. */
+ { struct fat_header* fh_be;
+ struct fat_header fh;
+ struct mach_header_64* mh;
+
+ // Assume initially that we have a thin image, and update
+ // these if it turns out to be fat.
+ ii->macho_img = ii->img;
+ ii->macho_img_szB = ii->img_szB;
+
+ // Check for fat header.
+ if (ii->img_szB < sizeof(struct fat_header))
+ fail("Invalid Mach-O file (0 too small).");
+
+ // Fat header is always BIG-ENDIAN
+ fh_be = (struct fat_header *)ii->img;
+ fh.magic = ntohl(fh_be->magic);
+ fh.nfat_arch = ntohl(fh_be->nfat_arch);
+ if (fh.magic == FAT_MAGIC) {
+ // Look for a good architecture.
+ struct fat_arch *arch_be;
+ struct fat_arch arch;
+ Int f;
+ if (ii->img_szB < sizeof(struct fat_header)
+ + fh.nfat_arch * sizeof(struct fat_arch))
+ fail("Invalid Mach-O file (1 too small).");
+
+ for (f = 0, arch_be = (struct fat_arch *)(fh_be+1);
+ f < fh.nfat_arch;
+ f++, arch_be++) {
+ Int cputype;
+# if defined(PLAT_x86_darwin)
+ cputype = CPU_TYPE_X86;
+# elif defined(PLAT_amd64_darwin)
+ cputype = CPU_TYPE_X86_64;
+# else
+# error "unknown architecture"
+# endif
+ arch.cputype = ntohl(arch_be->cputype);
+ arch.cpusubtype = ntohl(arch_be->cpusubtype);
+ arch.offset = ntohl(arch_be->offset);
+ arch.size = ntohl(arch_be->size);
+ if (arch.cputype == cputype) {
+ if (ii->img_szB < arch.offset + arch.size)
+ fail("Invalid Mach-O file (2 too small).");
+ ii->macho_img = ii->img + arch.offset;
+ ii->macho_img_szB = arch.size;
+ break;
+ }
+ }
+ if (f == fh.nfat_arch)
+ fail("No acceptable architecture found in fat file.");
+ }
+
+ /* Sanity check what we found. */
+
+ /* assured by logic above */
+ assert(ii->img_szB >= sizeof(struct fat_header));
+
+ if (ii->macho_img_szB < sizeof(struct mach_header_64))
+ fail("Invalid Mach-O file (3 too small).");
+
+ if (ii->macho_img_szB > ii->img_szB)
+ fail("Invalid Mach-O file (thin bigger than fat).");
+
+ if (ii->macho_img >= ii->img
+ && ii->macho_img + ii->macho_img_szB <= ii->img + ii->img_szB) {
+ /* thin entirely within fat, as expected */
+ } else {
+ fail("Invalid Mach-O file (thin not inside fat).");
+ }
+
+ mh = (struct mach_header_64 *)ii->macho_img;
+ if (mh->magic == MH_MAGIC) {
+ assert(ii->img);
+ assert(ii->macho_img);
+ assert(ii->img_szB > 0);
+ assert(ii->macho_img_szB > 0);
+ assert(ii->macho_img >= ii->img);
+ assert(ii->macho_img + ii->macho_img_szB <= ii->img + ii->img_szB);
+ return 32;
+ }
+ if (mh->magic != MH_MAGIC_64)
+ fail("Invalid Mach-O file (bad magic).");
+
+ if (ii->macho_img_szB < sizeof(struct mach_header_64) + mh->sizeofcmds)
+ fail("Invalid Mach-O file (4 too small).");
+ }
+
+ assert(ii->img);
+ assert(ii->macho_img);
+ assert(ii->img_szB > 0);
+ assert(ii->macho_img_szB > 0);
+ assert(ii->macho_img >= ii->img);
+ assert(ii->macho_img + ii->macho_img_szB <= ii->img + ii->img_szB);
+ return 64;
+}
+
+
+/*------------------------------------------------------------*/
+/*--- ---*/
+/*--- Mach-O top-level processing ---*/
+/*--- ---*/
+/*------------------------------------------------------------*/
+
+void modify_macho_loadcmds ( HChar* filename,
+ ULong expected_stack_start,
+ ULong expected_stack_size )
+{
+ ImageInfo ii;
+ memset(&ii, 0, sizeof(ii));
+
+ Int size = map_image_aboard( &ii, filename );
+ if (size == 32) {
+ fprintf(stderr, "fixup_macho_loadcmds: Is 32-bit MachO file;"
+ " no modifications needed.\n");
+ goto out;
+ }
+
+ assert(size == 64);
+
+ assert(ii.macho_img != NULL && ii.macho_img_szB > 0);
+
+ /* Poke around in the Mach-O header, to find some important
+ stuff.
+ * the location of the __UNIXSTACK load command, if any
+ * the location of the __LINKEDIT load command, if any
+ * the initial RSP value as stated in the LC_UNIXTHREAD
+ */
+
+ /* The collected data */
+ ULong init_rsp = 0;
+ Bool have_rsp = False;
+ struct segment_command_64* seg__unixstack = NULL;
+ struct segment_command_64* seg__linkedit = NULL;
+
+ /* Loop over the load commands and fill in the above 4 variables. */
+
+ { struct mach_header_64 *mh = (struct mach_header_64 *)ii.macho_img;
+ struct load_command *cmd;
+ Int c;
+
+ for (c = 0, cmd = (struct load_command *)(mh+1);
+ c < mh->ncmds;
+ c++, cmd = (struct load_command *)(cmd->cmdsize
+ + (unsigned long)cmd)) {
+ if (DEBUGPRINTING)
+ printf("load cmd: offset %4lu size %3d kind %2d = ",
+ (unsigned long)((UChar*)cmd - (UChar*)ii.macho_img),
+ cmd->cmdsize, cmd->cmd);
+
+ switch (cmd->cmd) {
+ case LC_SEGMENT_64:
+ if (DEBUGPRINTING)
+ printf("LC_SEGMENT_64");
+ break;
+ case LC_SYMTAB:
+ if (DEBUGPRINTING)
+ printf("LC_SYMTAB");
+ break;
+ case LC_UUID:
+ if (DEBUGPRINTING)
+ printf("LC_UUID");
+ break;
+ case LC_UNIXTHREAD:
+ if (DEBUGPRINTING)
+ printf("LC_UNIXTHREAD");
+ break;
+ default:
+ printf("???");
+ fail("unexpected load command in Mach header");
+ break;
+ }
+ if (DEBUGPRINTING)
+ printf("\n");
+
+ /* Note what the stated initial RSP value is, so we can
+ check it is as expected. */
+ if (cmd->cmd == LC_UNIXTHREAD) {
+ struct thread_command* tcmd = (struct thread_command*)cmd;
+ UInt* w32s = (UInt*)( (UChar*)tcmd + sizeof(*tcmd) );
+ if (DEBUGPRINTING)
+ printf("UnixThread: flavor %u = ", w32s[0]);
+ if (w32s[0] == x86_THREAD_STATE64 && !have_rsp) {
+ if (DEBUGPRINTING)
+ printf("x86_THREAD_STATE64\n");
+ x86_thread_state64_t* state64
+ = (x86_thread_state64_t*)(&w32s[2]);
+ have_rsp = True;
+ init_rsp = state64->__rsp;
+ if (DEBUGPRINTING)
+ printf("rsp = 0x%llx\n", init_rsp);
+ } else {
+ if (DEBUGPRINTING)
+ printf("???");
+ }
+ if (DEBUGPRINTING)
+ printf("\n");
+ }
+
+ if (cmd->cmd == LC_SEGMENT_64) {
+ struct segment_command_64 *seg = (struct segment_command_64 *)cmd;
+ if (0 == strcmp(seg->segname, "__LINKEDIT"))
+ seg__linkedit = seg;
+ if (0 == strcmp(seg->segname, "__UNIXSTACK"))
+ seg__unixstack = seg;
+ }
+
+ }
+ }
+
+ /*
+ Actions are then as follows:
+
+ * (always) check the RSP value is as expected, and abort if not
+
+ * if there's a UNIXSTACK load command, check it is as expected.
+ If not abort, if yes, do nothing more.
+
+ * (so there's no UNIXSTACK load command). if there's a LINKEDIT
+ load command, check if it is minimally usable (has 0 for
+ nsects and flags). If yes, convert it to a UNIXSTACK load
+ command. If there is none, or is unusable, then we're out of
+ options and have to abort.
+ */
+ if (!have_rsp)
+ fail("Can't find / check initial RSP setting");
+ if (init_rsp != expected_stack_start + expected_stack_size)
+ fail("Initial RSP value not as expected");
+
+ fprintf(stderr, "fixup_macho_loadcmds: "
+ "initial RSP is as expected (0x%llx)\n",
+ expected_stack_start + expected_stack_size );
+
+ if (seg__unixstack) {
+ struct segment_command_64 *seg = seg__unixstack;
+ if (seg->vmaddr != expected_stack_start)
+ fail("has __UNIXSTACK, but wrong ::vmaddr");
+ if (seg->vmsize != expected_stack_size)
+ fail("has __UNIXSTACK, but wrong ::vmsize");
+ if (seg->maxprot != 7)
+ fail("has __UNIXSTACK, but wrong ::maxprot (should be 7)");
+ if (seg->initprot != 3)
+ fail("has __UNIXSTACK, but wrong ::initprot (should be 3)");
+ if (seg->nsects != 0)
+ fail("has __UNIXSTACK, but wrong ::nsects (should be 0)");
+ if (seg->flags != 0)
+ fail("has __UNIXSTACK, but wrong ::flags (should be 0)");
+ /* looks ok */
+ fprintf(stderr, "fixup_macho_loadcmds: "
+ "acceptable __UNIXSTACK present; no modifications.\n" );
+ goto out;
+ }
+
+ if (seg__linkedit) {
+ struct segment_command_64 *seg = seg__linkedit;
+ if (seg->nsects != 0)
+ fail("has __LINKEDIT, but wrong ::nsects (should be 0)");
+ if (seg->flags != 0)
+ fail("has __LINKEDIT, but wrong ::flags (should be 0)");
+ fprintf(stderr, "fixup_macho_loadcmds: "
+ "no __UNIXSTACK present.\n" );
+ fprintf(stderr, "fixup_macho_loadcmds: "
+ "converting __LINKEDIT to __UNIXSTACK.\n" );
+ strcpy(seg->segname, "__UNIXSTACK");
+ seg->vmaddr = expected_stack_start;
+ seg->vmsize = expected_stack_size;
+ seg->fileoff = 0;
+ seg->filesize = 0;
+ seg->maxprot = 7;
+ seg->initprot = 3;
+ /* success */
+ goto out;
+ }
+
+ /* out of options */
+ fail("no __UNIXSTACK found and no usable __LINKEDIT found; "
+ "out of options.");
+ /* NOTREACHED */
+
+ out:
+ if (ii.img)
+ unmap_image(&ii);
+}
+
+
+static Bool is_plausible_tool_exe_name ( HChar* nm )
+{
+ HChar* p;
+ if (!nm)
+ return False;
+
+ // Does it end with this string?
+ p = strstr(nm, "-x86-darwin");
+ if (p && 0 == strcmp(p, "-x86-darwin"))
+ return True;
+
+ p = strstr(nm, "-amd64-darwin");
+ if (p && 0 == strcmp(p, "-amd64-darwin"))
+ return True;
+
+ return False;
+}
+
+
+int main ( int argc, char** argv )
+{
+ Int r;
+ ULong req_stack_addr = 0;
+ ULong req_stack_size = 0;
+
+ if (argc != 4)
+ fail("args: -stack_addr-arg -stack_size-arg "
+ "name-of-tool-executable-to-modify");
+
+ r= sscanf(argv[1], "0x%llx", &req_stack_addr);
+ if (r != 1) fail("invalid stack_addr arg");
+
+ r= sscanf(argv[2], "0x%llx", &req_stack_size);
+ if (r != 1) fail("invalid stack_size arg");
+
+ fprintf(stderr, "fixup_macho_loadcmds: "
+ "requested stack_addr (top) 0x%llx, "
+ "stack_size 0x%llx\n", req_stack_addr, req_stack_size );
+
+ if (!is_plausible_tool_exe_name(argv[3]))
+ fail("implausible tool exe name -- not of the form *-{x86,amd64}-darwin");
+
+ fprintf(stderr, "fixup_macho_loadcmds: examining tool exe: %s\n",
+ argv[3] );
+ modify_macho_loadcmds( argv[3], req_stack_addr - req_stack_size,
+ req_stack_size );
+
+ return 0;
+}
+
+/*
+ cmd LC_SEGMENT_64
+ cmdsize 72
+ segname __LINKEDIT
+ vmaddr 0x0000000138dea000
+ vmsize 0x00000000000ad000
+ fileoff 2658304
+ filesize 705632
+ maxprot 0x00000007
+ initprot 0x00000001
+ nsects 0
+ flags 0x0
+*/
+
+/*
+ cmd LC_SEGMENT_64
+ cmdsize 72
+ segname __UNIXSTACK
+ vmaddr 0x0000000133800000
+ vmsize 0x0000000000800000
+ fileoff 2498560
+ filesize 0
+ maxprot 0x00000007
+ initprot 0x00000003
+ nsects 0
+ flags 0x0
+*/
Index: coregrind/link_tool_exe_darwin.in
===================================================================
--- coregrind/link_tool_exe_darwin.in (revision 11685)
+++ coregrind/link_tool_exe_darwin.in (working copy)
@@ -160,14 +160,31 @@
}
}
-#print "link_tool_exe_darwin: $cmd\n";
+print "link_tool_exe_darwin: $cmd\n";
-
# Execute the command:
my $r = system("$cmd");
-if ($r == 0) {
- exit 0;
-} else {
- exit 1;
+if ($r != 0) {
+ exit 1;
}
+
+
+# and now kludge the tool exe
+# see bug 267997
+
+$cmd = "../coregrind/fixup_macho_loadcmds";
+$cmd = "$cmd $stack_addr_str $stack_size_str $outname";
+
+print "link_tool_exe_darwin: $cmd\n";
+
+my $r = system("$cmd");
+
+if ($r != 0) {
+ exit 1;
+}
+
+
+
+
+exit 0;
Index: coregrind/Makefile.am
===================================================================
--- coregrind/Makefile.am (revision 11685)
+++ coregrind/Makefile.am (working copy)
@@ -441,3 +441,18 @@
install-exec-local: install-noinst_PROGRAMS install-noinst_DSYMS
+#----------------------------------------------------------------------------
+# Darwin linker kludges
+#----------------------------------------------------------------------------
+
+if VGCONF_OS_IS_DARWIN
+
+BUILT_SOURCES += fixup_macho_loadcmds
+fixup_macho_loadcmds: fixup_macho_loadcmds.c
+ $(CC) -g -Wall -o fixup_macho_loadcmds fixup_macho_loadcmds.c
+
+CLEANFILES += fixup_macho_loadcmds
+
+endif
+
+EXTRA_DIST += fixup_macho_loadcmds.c