class Pcb2gcode < Formula desc "Command-line tool for isolation, routing and drilling of PCBs" homepage "https://github.com/pcb2gcode/pcb2gcode" url "https://github.com/pcb2gcode/pcb2gcode/releases/download/v1.2.3/pcb2gcode-1.2.3.tar.gz" sha256 "90fbd6c2c353609451e4284fcdcc395359ff582b13c053939f2da2825f081477" bottle do cellar :any sha256 "63919bc4899d152f8c61017d765f35c0a17f104c57db06f62d6ffcae10e5b2db" => :el_capitan sha256 "d04fe0a9ed1490499226bfbb656a204df7603d6c523ba1754fd21393d819fc61" => :yosemite sha256 "a7403533e4ea86459bf8e2d5db1d57289e46a65a5fb2775a97dbb521ccf67635" => :mavericks end head do url "https://github.com/pcb2gcode/pcb2gcode.git" depends_on "autoconf" => :build depends_on "automake" => :build depends_on "libtool" => :build end depends_on "boost" depends_on "gtkmm" depends_on "gerbv" def install system "autoreconf", "-fvi" if build.head? system "./configure", "--disable-dependency-tracking", "--disable-silent-rules", "--prefix=#{prefix}" system "make", "install" end test do (testpath/"front.gbr").write <<-EOS.undent %FSLAX46Y46*% %MOMM*% G01* %ADD10C,0.100000*% %ADD11R,2.032000X2.032000*% %ADD12O,2.032000X2.032000*% %ADD13C,0.250000*% D10* D11* X127000000Y-63500000D03* D12* X127000000Y-66040000D03* D13* X124460000Y-66040000D02* X127000000Y-66040000D01* X124460000Y-63500000D02* X124460000Y-66040000D01* X127000000Y-63500000D02* X124460000Y-63500000D01* M02* EOS (testpath/"edge.gbr").write <<-EOS.undent %FSLAX46Y46*% %MOMM*% G01* %ADD10C,0.100000*% %ADD11C,0.150000*% D10* D11* X123190000Y-67310000D02* X123190000Y-62230000D01* X128270000Y-67310000D02* X123190000Y-67310000D01* X128270000Y-62230000D02* X128270000Y-67310000D01* X123190000Y-62230000D02* X128270000Y-62230000D01* M02* EOS (testpath/"drill.drl").write <<-EOS.undent M48 FMAT,2 METRIC,TZ T1C1.016 % G90 G05 M71 T1 X127.Y-63.5 X127.Y-66.04 T0 M30 EOS (testpath/"millproject").write <<-EOS.undent dpi=500 metric=true zchange=10 zsafe=5 mill-feed=600 mill-speed=10000 offset=0.1 zwork=-0.05 drill-feed=1000 drill-speed=10000 zdrill=-2.5 bridges=0.5 bridgesnum=4 cut-feed=600 cut-infeed=10 cut-speed=10000 cutter-diameter=3 fill-outline=true outline-width=0.15 zbridges=-0.6 zcut=-2.5 al-front=true al-probefeed=100 al-x=15 al-y=15 software=LinuxCNC EOS system "#{bin}/pcb2gcode", "--front=front.gbr", "--outline=edge.gbr", "--drill=drill.drl" end end