wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/Configurations/10-main.conf

1908 lines
85 KiB
Text
Raw Normal View History

Add perl modeline to Configure scripts Encourages GitHub to perform proper syntax highlighting. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-11-24 05:44:58 +00:00
## -*- mode: perl; -*-
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
## Standard openssl configuration targets.
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
# Helper functions for the Windows configs
my $vc_win64a_info = {};
sub vc_win64a_info {
unless (%$vc_win64a_info) {
if (`nasm -v 2>NUL` =~ /NASM version ([0-9]+\.[0-9]+)/ && $1 >= 2.0) {
$vc_win64a_info = { as => "nasm",
asflags => "-f win64 -DNEAR -Ox -g",
asoutflag => "-o" };
Only allow Microsoft assembler with no-asm on Windows This also restores the possibility to have ml used with VC-WIN32 with no-asm, which was lost during the mk1mf -> unified transition. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-18 18:15:33 +00:00
} elsif ($disabled{asm}) {
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
$vc_win64a_info = { as => "ml64",
asflags => "/c /Cp /Cx /Zi",
asoutflag => "/Fo" };
Only allow Microsoft assembler with no-asm on Windows This also restores the possibility to have ml used with VC-WIN32 with no-asm, which was lost during the mk1mf -> unified transition. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-18 18:15:33 +00:00
} else {
Have Configure's HASH or TABLE produce complete lists Because some targets execute perl code that might die, we risk incomplete lists. Make it so dying doesn't happen when we're listing targets. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 17:47:35 +00:00
$die->("NASM not found - please read INSTALL and NOTES.WIN for further details\n");
$vc_win64a_info = { as => "{unknown}",
asflags => "",
asoutflag => "" };
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
}
}
return $vc_win64a_info;
}
Only allow Microsoft assembler with no-asm on Windows This also restores the possibility to have ml used with VC-WIN32 with no-asm, which was lost during the mk1mf -> unified transition. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-18 18:15:33 +00:00
my $vc_win32_info = {};
sub vc_win32_info {
unless (%$vc_win32_info) {
my $ver=`nasm -v 2>NUL`;
my $vew=`nasmw -v 2>NUL`;
if ($ver ne "" || $vew ne "") {
$vc_win32_info = { as => $ver ge $vew ? "nasm" : "nasmw",
asflags => "-f win32",
asoutflag => "-o",
perlasm_scheme => "win32n" };
} elsif ($disabled{asm}) {
$vc_win32_info = { as => "ml",
asflags => "/nologo /Cp /coff /c /Cx /Zi",
asoutflag => "/Fo",
perlasm_scheme => "win32" };
} else {
Have Configure's HASH or TABLE produce complete lists Because some targets execute perl code that might die, we risk incomplete lists. Make it so dying doesn't happen when we're listing targets. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 17:47:35 +00:00
$die->("NASM not found - please read INSTALL and NOTES.WIN for further details\n");
$vc_win32_info = { as => "{unknown}",
asflags => "",
asoutflag => "",
perlasm_scheme => "win32" };
Only allow Microsoft assembler with no-asm on Windows This also restores the possibility to have ml used with VC-WIN32 with no-asm, which was lost during the mk1mf -> unified transition. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-18 18:15:33 +00:00
}
}
return $vc_win32_info;
}
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my $vc_wince_info = {};
sub vc_wince_info {
unless (%$vc_wince_info) {
# sanity check
Have Configure's HASH or TABLE produce complete lists Because some targets execute perl code that might die, we risk incomplete lists. Make it so dying doesn't happen when we're listing targets. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 17:47:35 +00:00
$die->('%OSVERSION% is not defined') if (!defined($ENV{'OSVERSION'}));
$die->('%PLATFORM% is not defined') if (!defined($ENV{'PLATFORM'}));
$die->('%TARGETCPU% is not defined') if (!defined($ENV{'TARGETCPU'}));
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
#
# Idea behind this is to mimic flags set by eVC++ IDE...
#
my $wcevers = $ENV{'OSVERSION'}; # WCENNN
Have Configure's HASH or TABLE produce complete lists Because some targets execute perl code that might die, we risk incomplete lists. Make it so dying doesn't happen when we're listing targets. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 17:47:35 +00:00
my $wcevernum;
my $wceverdotnum;
if ($wcevers =~ /^WCE([1-9])([0-9]{2})$/) {
$wcevernum = "$1$2";
$wceverdotnum = "$1.$2";
} else {
$die->('%OSVERSION% value is insane');
$wcevernum = "{unknown}";
$wceverdotnum = "{unknown}";
}
my $wcecdefs = "-D_WIN32_WCE=$wcevernum -DUNDER_CE=$wcevernum"; # -D_WIN32_WCE=NNN
my $wcelflag = "/subsystem:windowsce,$wceverdotnum"; # ...,N.NN
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my $wceplatf = $ENV{'PLATFORM'};
Fix a few Configure errors Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-14 09:02:13 +00:00
$wceplatf =~ tr/a-z0-9 /A-Z0-9_/;
$wcecdefs .= " -DWCE_PLATFORM_$wceplatf";
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my $wcetgt = $ENV{'TARGETCPU'}; # just shorter name...
SWITCH: for($wcetgt) {
/^X86/ && do { $wcecdefs.=" -Dx86 -D_X86_ -D_i386_ -Di_386_";
$wcelflag.=" /machine:X86"; last; };
/^ARMV4[IT]/ && do { $wcecdefs.=" -DARM -D_ARM_ -D$wcetgt";
$wcecdefs.=" -DTHUMB -D_THUMB_" if($wcetgt=~/T$/);
$wcecdefs.=" -QRarch4T -QRinterwork-return";
$wcelflag.=" /machine:THUMB"; last; };
/^ARM/ && do { $wcecdefs.=" -DARM -D_ARM_ -D$wcetgt";
$wcelflag.=" /machine:ARM"; last; };
/^MIPSIV/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt";
$wcecdefs.=" -D_MIPS64 -QMmips4 -QMn32";
$wcelflag.=" /machine:MIPSFPU"; last; };
/^MIPS16/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt";
$wcecdefs.=" -DMIPSII -QMmips16";
$wcelflag.=" /machine:MIPS16"; last; };
/^MIPSII/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000 -D$wcetgt";
$wcecdefs.=" -QMmips2";
$wcelflag.=" /machine:MIPS"; last; };
/^R4[0-9]{3}/ && do { $wcecdefs.=" -DMIPS -D_MIPS_ -DR4000";
$wcelflag.=" /machine:MIPS"; last; };
/^SH[0-9]/ && do { $wcecdefs.=" -D$wcetgt -D_${wcetgt}_ -DSHx";
$wcecdefs.=" -Qsh4" if ($wcetgt =~ /^SH4/);
$wcelflag.=" /machine:$wcetgt"; last; };
{ $wcecdefs.=" -D$wcetgt -D_${wcetgt}_";
$wcelflag.=" /machine:$wcetgt"; last; };
}
$vc_wince_info = { cflags => $wcecdefs,
lflags => $wcelflag };
}
return $vc_wince_info;
}
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
# Helper functions for the VMS configs
my $vms_info = {};
sub vms_info {
unless (%$vms_info) {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
my $pointer_size = shift;
my $pointer_size_str = $pointer_size == 0 ? "" : "$pointer_size";
$vms_info->{disable_warns} = [ ];
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
$vms_info->{pointer_size} = $pointer_size_str;
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
if ($pointer_size == 64) {
`PIPE CC /NOCROSS_REFERENCE /NOLIST /NOOBJECT /WARNINGS = DISABLE = ( MAYLOSEDATA3, EMPTYFILE ) NL: 2> NL:`;
if ($? == 0) {
push @{$vms_info->{disable_warns}}, "MAYLOSEDATA3";
}
}
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
unless ($disabled{zlib}) {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
my $default_zlib = 'GNV$LIBZSHR' . $pointer_size_str;
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
if (defined($disabled{"zlib-dynamic"})) {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
$vms_info->{zlib} = $withargs{zlib_lib} || "$default_zlib/SHARE";
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
} else {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
$vms_info->{def_zlib} = $withargs{zlib_lib} || $default_zlib;
# In case the --with-zlib-lib value contains something like
# /SHARE or /LIB or so at the end, remove it.
$vms_info->{def_zlib} =~ s|/.*$||g;
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}
}
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
}
return $vms_info;
}
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
%targets = (
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### Basic configs that should work on any 32-bit box
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"gcc" => {
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => picker(debug => "-O0 -g",
release => "-O3"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
bn_ops => "BN_LLONG",
},
"cc" => {
cc => "cc",
cflags => "-O",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### VOS Configurations
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"vos-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => picker(default => "-Wall -DOPENSSL_SYS_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN",
Clean-up *_DEBUG options. Since NDEBUG is defined unconditionally on command line for release builds, we can omit *_DEBUG options in favour of effective "all-on" in debug builds exercised though CI. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Emilia Käsper <emilia@openssl.org>
2016-04-06 10:47:35 +00:00
debug => "-O0 -g",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
release => "-O3"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "VOS",
lflags => "-Wl,-map",
bn_ops => "BN_LLONG",
shared_extension => ".so",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Fix spelling Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-17 23:32:13 +00:00
#### Solaris configurations
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
"solaris-common" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
template => 1,
cflags => "-DFILIO_H",
Configurations/10-main.conf: omit redundant -lresolv from Solaris configs. GH#2816 Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
2017-03-01 20:40:02 +00:00
ex_libs => add("-lsocket -lnsl -ldl"),
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
dso_scheme => "dlfcn",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
shared_target => "solaris-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Solaris x86 with GNU C setups
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-x86-gcc" => {
Configurations/10-main.conf: document GCC for Solaris config constraint. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-12 15:01:47 +00:00
# NB. GNU C has to be configured to use GNU assembler, and not
# /usr/ccs/bin/as. Failure to comply will result in compile
# failures [at least] in 32-bit build.
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
inherit_from => [ "solaris-common", asm("x86_elf_asm") ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
cc => "gcc",
Configurations/10-main.conf: remove obsolete flag from solaris-x86-gcc. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-12 15:14:03 +00:00
cflags => add_before(picker(default => "-Wall -DL_ENDIAN",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
debug => "-O0 -g",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
release => "-O3 -fomit-frame-pointer"),
threads("-pthread")),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_cflag => "-fPIC",
Configurations/10-main.conf: remove solaris-x86-cc target. Since vendor assembler can't assemble our modules with -KPIC flag, it, assembly support, was not available as an option. But this means lack of side-channel resistant code, which is incompatible with security by todays standards. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 14:13:10 +00:00
shared_ldflag => "-shared -static-libgcc",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"solaris64-x86_64-gcc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# -shared -static-libgcc might appear controversial, but modules
# taken from static libgcc do not have relocations and linking
# them into our shared objects doesn't have any negative side
# effects. On the contrary, doing so makes it possible to use
# gcc shared build with Sun C. Given that gcc generates faster
# code [thanks to inline assembler], I would actually recommend
# to consider using gcc shared build even with vendor compiler:-)
# <appro@fy.chalmers.se>
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
inherit_from => [ "solaris-common", asm("x86_64_asm") ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add_before(picker(default => "-m64 -Wall -DL_ENDIAN",
debug => "-O0 -g",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
release => "-O3"),
threads("-pthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf",
shared_cflag => "-fPIC",
shared_ldflag => "-m64 -shared -static-libgcc",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Solaris x86 with Sun C setups
Configurations/10-main.conf: remove solaris-x86-cc target. Since vendor assembler can't assemble our modules with -KPIC flag, it, assembly support, was not available as an option. But this means lack of side-channel resistant code, which is incompatible with security by todays standards. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 14:13:10 +00:00
# There used to be solaris-x86-cc target, but it was removed,
# primarily because vendor assembler can't assemble our modules
# with -KPIC flag. As result it, assembly support, was not even
# available as option. But its lack means lack of side-channel
# resistant code, which is incompatible with security by todays
# standards. Fortunately gcc is readily available prepackaged
# option, which we can firmly point at...
#
# On related note, solaris64-x86_64-cc target won't compile code
# paths utilizing AVX and post-Haswell instruction extensions.
# Consider switching to solaris64-x86_64-gcc even here...
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris64-x86_64-cc" => {
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
inherit_from => [ "solaris-common", asm("x86_64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add_before(picker(default => "-xarch=generic64 -xstrconst -Xa -DL_ENDIAN",
debug => "-g",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
release => "-xO5 -xdepend -xbuiltin"),
threads("-D_REENTRANT")),
thread_scheme => "pthreads",
Configurations/10-main.conf: fix solaris64-*-cc link problems. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-08-24 15:05:05 +00:00
lflags => add("-xarch=generic64",threads("-mt")),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
ex_libs => add(threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf",
shared_cflag => "-KPIC",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
shared_ldflag => "-xarch=generic64 -G -dy -z text",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SPARC Solaris with GNU C setups
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv7-gcc" => {
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
inherit_from => [ "solaris-common" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add_before(picker(default => "-Wall -DB_ENDIAN -DBN_DIV2W",
debug => "-O0 -g",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
release => "-O3"),
threads("-pthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
},
"solaris-sparcv8-gcc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "solaris-sparcv7-gcc", asm("sparcv8_asm") ],
Configure - neater looking add() and add_before() They now default to " " as separator, but that can be overridden by having a hash with parameters as last argument. The only currently recognised parameter is `separator'. The special separator `undef' will force the result to become a list rather than a concatenated string. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-24 23:17:59 +00:00
cflags => add_before("-mcpu=v8"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"solaris-sparcv9-gcc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# -m32 should be safe to add as long as driver recognizes
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
# -mcpu=ultrasparc
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "solaris-sparcv7-gcc", asm("sparcv9_asm") ],
Clean-up *_DEBUG options. Since NDEBUG is defined unconditionally on command line for release builds, we can omit *_DEBUG options in favour of effective "all-on" in debug builds exercised though CI. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Emilia Käsper <emilia@openssl.org>
2016-04-06 10:47:35 +00:00
cflags => add_before("-m32 -mcpu=ultrasparc"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"solaris64-sparcv9-gcc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "solaris-sparcv9-gcc" ],
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
cflags => sub { my $f=join(" ",@_); $f =~ s/\-m32/-m64/; $f; },
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_ldflag => "-m64 -shared",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SPARC Solaris with Sun C setups
# SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
# SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
# SC5.0 note: Compiler common patch 107357-01 or later is required!
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv7-cc" => {
Configuratons: add -DFILIO_H to harmonized Solaris targets. Triggered by RT#4144. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2015-11-23 13:12:17 +00:00
inherit_from => [ "solaris-common" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add_before(picker(default => "-xstrconst -Xa -DB_ENDIAN -DBN_DIV2W",
Clean-up *_DEBUG options. Since NDEBUG is defined unconditionally on command line for release builds, we can omit *_DEBUG options in favour of effective "all-on" in debug builds exercised though CI. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Emilia Käsper <emilia@openssl.org>
2016-04-06 10:47:35 +00:00
debug => "-g",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
release => "-xO5 -xdepend"),
threads("-D_REENTRANT")),
lflags => add(threads("-mt")),
ex_libs => add(threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_cflag => "-KPIC",
shared_ldflag => "-G -dy -z text",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv8-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "solaris-sparcv7-cc", asm("sparcv8_asm") ],
Configure - neater looking add() and add_before() They now default to " " as separator, but that can be overridden by having a hash with parameters as last argument. The only currently recognised parameter is `separator'. The special separator `undef' will force the result to become a list rather than a concatenated string. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-24 23:17:59 +00:00
cflags => add_before("-xarch=v8"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"solaris-sparcv9-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "solaris-sparcv7-cc", asm("sparcv9_asm") ],
Remove -xtarget=ultra from solaris(64)-sparcv9-cc builds. This flag got moved after -xarch=v9 in 1.1.0 and had the unexpected side effect of the compiler building for 32-bit v8plusa instead of v9. GH#1521 CLA: none; trivial Signed-off-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-08-30 21:25:10 +00:00
cflags => add_before("-xarch=v8plus"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"solaris64-sparcv9-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "solaris-sparcv7-cc", asm("sparcv9_asm") ],
Remove -xtarget=ultra from solaris(64)-sparcv9-cc builds. This flag got moved after -xarch=v9 in 1.1.0 and had the unexpected side effect of the compiler building for 32-bit v8plusa instead of v9. GH#1521 CLA: none; trivial Signed-off-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-08-30 21:25:10 +00:00
cflags => add_before("-xarch=v9"),
Configurations/10-main.conf: fix solaris64-*-cc link problems. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-08-24 15:05:05 +00:00
lflags => add_before("-xarch=v9"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_ldflag => "-xarch=v9 -G -dy -z text",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### IRIX 6.x configs
IRIX fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-04 21:40:47 +00:00
# Only N32 and N64 ABIs are supported.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"irix-mips3-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("mips64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-mabi=n32 -DB_ENDIAN -DBN_DIV3W",
debug => "-g -O0",
release => "-O3"),
IRIX fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-04 21:40:47 +00:00
threads("-D_SGI_MP_SOURCE")),
ex_libs => add(threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "n32",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-mabi=n32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "32",
},
"irix-mips3-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("mips64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-n32 -mips3 -use_readonly_const -G0 -rdata_shared -DB_ENDIAN -DBN_DIV3W",
debug => "-g -O0",
release => "-O2"),
threads("-D_SGI_MP_SOURCE")),
ex_libs => add(threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "n32",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-n32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "32",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# N64 ABI builds.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"irix64-mips4-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("mips64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-mabi=64 -mips4 -DB_ENDIAN -DBN_DIV3W",
debug => "-g -O0",
release => "-O3"),
threads("-D_SGI_MP_SOURCE")),
IRIX fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-04 21:40:47 +00:00
ex_libs => add(threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT_LONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "64",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-mabi=64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
"irix64-mips4-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("mips64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-64 -mips4 -use_readonly_const -G0 -rdata_shared -DB_ENDIAN -DBN_DIV3W",
debug => "-g -O0",
release => "-O2"),
threads("-D_SGI_MP_SOURCE")),
ex_libs => add(threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "RC4_CHAR SIXTY_FOUR_BIT_LONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "64",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Unified HP-UX ANSI C configs.
# Special notes:
# - Originally we were optimizing at +O4 level. It should be noted
# that the only difference between +O3 and +O4 is global inter-
# procedural analysis. As it has to be performed during the link
# stage the compiler leaves behind certain pseudo-code in lib*.a
# which might be release or even patch level specific. Generating
# the machine code for and analyzing the *whole* program appears
# to be *extremely* memory demanding while the performance gain is
# actually questionable. The situation is intensified by the default
# HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB
# which is way too low for +O4. In other words, doesn't +O3 make
# more sense?
# - Keep in mind that the HP compiler by default generates code
# suitable for execution on the host you're currently compiling at.
GH753: More spelling fix Signed-off-by: Rich Salz <rsalz@akamai.com> Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-02-26 19:30:15 +00:00
# If the toolkit is meant to be used on various PA-RISC processors
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# consider './Configure hpux-parisc-[g]cc +DAportable'.
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# - -DMD32_XARRAY triggers workaround for compiler bug we ran into in
# 32-bit message digests. (For the moment of this writing) HP C
# doesn't seem to "digest" too many local variables (they make "him"
# chew forever:-). For more details look-up MD32_XARRAY comment in
# crypto/sha/sha_lcl.h.
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# - originally there were 32-bit hpux-parisc2-* targets. They were
GH753: More spelling fix Signed-off-by: Rich Salz <rsalz@akamai.com> Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-02-26 19:30:15 +00:00
# scrapped, because a) they were not interchangeable with other 32-bit
Configurations/10-main.conf: fix PA-RISC commentary. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-26 17:08:51 +00:00
# targets; b) performance-critical 32-bit assembly modules implement
# even PA-RISC 2.0-specific code paths, which are chosen at run-time,
# thus adequate performance is provided even with PA-RISC 1.1 build.
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# <appro@fy.chalmers.se>
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-parisc-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-DB_ENDIAN -DBN_DIV2W",
debug => "-O0 -g",
release => "-O3"),
threads("-pthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-Wl,+s -ldld"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"hpux-parisc1_1-gcc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "hpux-parisc-gcc", asm("parisc11_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "/pa1.1",
},
"hpux64-parisc2-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("parisc20_64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-DB_ENDIAN",
debug => "-O0 -g",
release => "-O3"),
threads("-D_REENTRANT")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-ldl"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "-fpic",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa20_64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# More attempts at unified 10.X and 11.X targets for HP C compiler.
#
# Chris Ruemmler <ruemmler@cup.hp.com>
# Kevin Steves <ks@hp.se>
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-parisc-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "+Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY",
debug => "+O0 +d -g",
release => "+O3"),
threads("-D_REENTRANT")),
ex_libs => add("-Wl,+s -ldld",threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "-b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"hpux-parisc1_1-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "hpux-parisc-cc", asm("parisc11_asm") ],
Configure - neater looking add() and add_before() They now default to " " as separator, but that can be overridden by having a hash with parameters as last argument. The only currently recognised parameter is `separator'. The special separator `undef' will force the result to become a list rather than a concatenated string. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-24 23:17:59 +00:00
cflags => add_before("+DA1.1"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "/pa1.1",
},
"hpux64-parisc2-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("parisc20_64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "+DD64 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY",
debug => "+O0 +d -g",
release => "+O3"),
threads("-D_REENTRANT")),
ex_libs => add("-ldl",threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "+DD64 -b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa20_64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# HP/UX IA-64 targets
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-ia64-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ia64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-Ae +DD32 +Olit=all -z -DB_ENDIAN",
debug => "+O0 +d -g",
release => "+O2"),
threads("-D_REENTRANT")),
ex_libs => add("-ldl",threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "+DD32 -b",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux32",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted
# with debugging of the following config.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux64-ia64-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ia64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-Ae +DD64 +Olit=all -z -DB_ENDIAN",
debug => "+O0 +d -g",
release => "+O3"),
threads("-D_REENTRANT")),
ex_libs => add("-ldl", threads("-lpthread")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "+DD64 -b",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux64",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# GCC builds...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-ia64-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ia64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-DB_ENDIAN",
debug => "-O0 -g",
release => "-O3"),
threads("-pthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-ldl"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "-fpic",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux32",
},
"hpux64-ia64-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ia64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Fix a few Configure errors Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-14 09:02:13 +00:00
cflags => combine(picker(default => "-mlp64 -DB_ENDIAN",
debug => "-O0 -g",
release => "-O3"),
threads("-pthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-ldl"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "-fpic",
shared_ldflag => "-mlp64 -shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### HP MPE/iX http://jazz.external.hp.com/src/openssl/
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"MPE/iX-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
cflags => "-D_ENDIAN -DBN_DIV2W -O3 -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB",
sys_id => "MPE",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-L/SYSLOG/PUB -lsyslog -lsocket -lcurses"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Tru64 fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-02 08:33:42 +00:00
#### DEC Alpha Tru64 targets. Tru64 is marketing name for OSF/1 version 4
#### and forward. In reality 'uname -s' still returns "OSF1". Originally
#### there were even osf1-* configs targeting prior versions provided,
#### but not anymore...
"tru64-alpha-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("alpha_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Tru64 fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-02 08:33:42 +00:00
cflags => combine("-std=c9x -D_XOPEN_SOURCE=500 -D_OSF_SOURCE -O3",
threads("-pthread")),
ex_libs => "-lrt", # for mlock(2)
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Tru64 fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-02 08:33:42 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "alpha-osf1-shared",
shared_extension => ".so",
},
"tru64-alpha-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("alpha_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Tru64 fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-02 08:33:42 +00:00
cflags => combine("-std1 -D_XOPEN_SOURCE=500 -D_OSF_SOURCE -tune host -fast -readonly_strings",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
threads("-pthread")),
Tru64 fixes. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-05-02 08:33:42 +00:00
ex_libs => "-lrt", # for mlock(2)
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "alpha-osf1-shared",
shared_ldflag => "-msym",
shared_extension => ".so",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####
#### Variety of LINUX:-)
####
# *-generic* is endian-neutral target, but ./config is free to
# throw in -D[BL]_ENDIAN, whichever appropriate...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-generic32" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Add C++ settings in the Linux config targets Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-10-12 13:33:13 +00:00
cxx => "g++",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-Wall",
Clean-up *_DEBUG options. Since NDEBUG is defined unconditionally on command line for release builds, we can omit *_DEBUG options in favour of effective "all-on" in debug builds exercised though CI. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Emilia Käsper <emilia@openssl.org>
2016-04-06 10:47:35 +00:00
debug => "-O0 -g",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
release => "-O3"),
threads("-pthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-ldl"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "linux-shared",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_cflag => "-fPIC -DOPENSSL_USE_NODELETE",
Clang doesn't like -znodelete, make it a linker flag instead gcc is kinder, it silently passes quite a few flags to ld, while clang is stricter and wants them prefixed with -Wl, Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1836)
2016-11-03 14:26:00 +00:00
shared_ldflag => "-Wl,-znodelete",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"linux-generic64" => {
inherit_from => [ "linux-generic32" ],
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-ppc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic32", asm("ppc32_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "linux32",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
},
"linux-ppc64" => {
inherit_from => [ "linux-generic64", asm("ppc64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m64 -DB_ENDIAN"),
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
perlasm_scheme => "linux64",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m64"),
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
multilib => "64",
},
"linux-ppc64le" => {
inherit_from => [ "linux-generic64", asm("ppc64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m64 -DL_ENDIAN"),
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
perlasm_scheme => "linux64le",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m64"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-armv4" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
################################################################
# Note that -march is not among compiler options in linux-armv4
# target description. Not specifying one is intentional to give
# you choice to:
#
# a) rely on your compiler default by not specifying one;
# b) specify your target platform explicitly for optimal
# performance, e.g. -march=armv6 or -march=armv7-a;
# c) build "universal" binary that targets *range* of platforms
# by specifying minimum and maximum supported architecture;
#
# As for c) option. It actually makes no sense to specify
# maximum to be less than ARMv7, because it's the least
# requirement for run-time switch between platform-specific
# code paths. And without run-time switch performance would be
# equivalent to one for minimum. Secondly, there are some
# natural limitations that you'd have to accept and respect.
# Most notably you can *not* build "universal" binary for
# big-endian platform. This is because ARMv7 processor always
# picks instructions in little-endian order. Another similar
# limitation is that -mthumb can't "cross" -march=armv6t2
# boundary, because that's where it became Thumb-2. Well, this
# limitation is a bit artificial, because it's not really
# impossible, but it's deemed too tricky to support. And of
# course you have to be sure that your binutils are actually
# up to the task of handling maximum target platform. With all
# this in mind here is an example of how to configure
# "universal" build:
#
# ./Configure linux-armv4 -march=armv6 -D__ARM_MAX_ARCH__=8
#
inherit_from => [ "linux-generic32", asm("armv4_asm") ],
perlasm_scheme => "linux32",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"linux-aarch64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic64", asm("aarch64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "linux64",
},
Configurations: add linux-arm64ilp32 target. Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-09-23 14:43:55 +00:00
"linux-arm64ilp32" => { # https://wiki.linaro.org/Platform/arm64-ilp32
inherit_from => [ "linux-generic32", asm("aarch64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mabi=ilp32"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT RC4_CHAR",
Configurations: add linux-arm64ilp32 target. Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-09-23 14:43:55 +00:00
perlasm_scheme => "linux64",
Add missing -zdelete for some linux arches b6d5ba1a9f004d637acac18ae3519fe063b6b5e1 forgot to update some linux arches. Reviewed-by: Richard Levitte <levitte@openssl.org> GH: #1977
2016-11-21 21:15:11 +00:00
shared_ldflag => add("-mabi=ilp32"),
Configurations: add linux-arm64ilp32 target. Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-09-23 14:43:55 +00:00
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-mips32" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# Configure script adds minimally required -march for assembly
# support, if no -march was specified at command line.
inherit_from => [ "linux-generic32", asm("mips32_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mabi=32 -DBN_DIV3W"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "o32",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-mabi=32"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# mips32 and mips64 below refer to contemporary MIPS Architecture
# specifications, MIPS32 and MIPS64, rather than to kernel bitness.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-mips64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic32", asm("mips64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mabi=n32 -DBN_DIV3W"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "n32",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-mabi=n32"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "32",
},
"linux64-mips64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic64", asm("mips64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mabi=64 -DBN_DIV3W"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "64",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-mabi=64"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "64",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### IA-32 targets...
Add a modern linux-x86 config target 'linux-x86' is similar to 'linux-x86_64' but uses -m32 rather than -m64. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1924)
2016-11-15 08:53:01 +00:00
#### These two targets are a bit aged and are to be used on older Linux
#### machines where gcc doesn't understand -m32 and -m64
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-elf" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic32", asm("x86_elf_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add(picker(default => "-DL_ENDIAN",
release => "-fomit-frame-pointer")),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"linux-aout" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add(picker(default => "-DL_ENDIAN -Wall",
debug => "-O0 -g",
release => "-O3 -fomit-frame-pointer")),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "a.out",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
Add a modern linux-x86 config target 'linux-x86' is similar to 'linux-x86_64' but uses -m32 rather than -m64. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1924)
2016-11-15 08:53:01 +00:00
#### X86 / X86_64 targets
"linux-x86" => {
inherit_from => [ "linux-generic32", asm("x86_asm") ],
cflags => add(picker(default => "-m32 -DL_ENDIAN",
release => "-fomit-frame-pointer")),
bn_ops => "BN_LLONG",
perlasm_scheme => "elf",
shared_ldflag => add("-m32"),
},
"linux-x86-clang" => {
inherit_from => [ "linux-x86" ],
cc => "clang",
cxx => "clang++",
cflags => add("-Wextra -Qunused-arguments"),
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-x86_64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic64", asm("x86_64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m64 -DL_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m64"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "64",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"linux-x86_64-clang" => {
inherit_from => [ "linux-x86_64" ],
cc => "clang",
Use clang++ for C++ for the linux-x86_64-clang target Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-10-14 16:04:38 +00:00
cxx => "clang++",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-Wextra -Qunused-arguments"),
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-x32" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic32", asm("x86_64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mx32 -DL_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT",
poly1305/asm/poly1305-x86_64.pl: make it work with linux-x32. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-15 22:39:07 +00:00
perlasm_scheme => "elf32",
Add missing -zdelete for some linux arches b6d5ba1a9f004d637acac18ae3519fe063b6b5e1 forgot to update some linux arches. Reviewed-by: Richard Levitte <levitte@openssl.org> GH: #1977
2016-11-21 21:15:11 +00:00
shared_ldflag => add("-mx32"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "x32",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"linux-ia64" => {
inherit_from => [ "linux-generic64", asm("ia64_asm") ],
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux64-s390x" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic64", asm("s390x_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m64 -DB_ENDIAN"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "64",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m64"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "64",
},
"linux32-s390x" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### So called "highgprs" target for z/Architecture CPUs
# "Highgprs" is kernel feature first implemented in Linux
# 2.6.32, see /proc/cpuinfo. The idea is to preserve most
# significant bits of general purpose registers not only
# upon 32-bit process context switch, but even on
# asynchronous signal delivery to such process. This makes
# it possible to deploy 64-bit instructions even in legacy
# application context and achieve better [or should we say
# adequate] performance. The build is binary compatible with
# linux-generic32, and the idea is to be able to install the
# resulting libcrypto.so alongside generic one, e.g. as
# /lib/highgprs/libcrypto.so.x.y, for ldconfig and run-time
# linker to autodiscover. Unfortunately it doesn't work just
# yet, because of couple of bugs in glibc
# sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
#
inherit_from => [ "linux-generic32", asm("s390x_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m31 -Wa,-mzarch -DB_ENDIAN"),
s390x assembly pack: 32-bit fixups. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-11 15:47:02 +00:00
bn_asm_src => sub { my $r=join(" ",@_); $r=~s|asm/s390x\.S|bn_asm.c|; $r; },
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "31",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m31"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "/highgprs",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### SPARC Linux setups
# Ray Miller <ray.miller@computing-services.oxford.ac.uk> has
# patiently assisted with debugging of following two configs.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-sparcv8" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic32", asm("sparcv8_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mcpu=v8 -DB_ENDIAN -DBN_DIV2W"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"linux-sparcv9" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# it's a real mess with -mcpu=ultrasparc option under Linux,
# but -Wa,-Av8plus should do the trick no matter what.
inherit_from => [ "linux-generic32", asm("sparcv9_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m32 -mcpu=ultrasparc -Wa,-Av8plus -DB_ENDIAN -DBN_DIV2W"),
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m32"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"linux64-sparcv9" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# GCC 3.1 is a requirement
inherit_from => [ "linux-generic64", asm("sparcv9_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-m64 -mcpu=ultrasparc -DB_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-m64"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
multilib => "64",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-alpha-gcc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic64", asm("alpha_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-DL_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"linux-c64xplus" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# TI_CGT_C6000_7.3.x is a requirement
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cl6x",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("--linux -ea=.s -eo=.o -mv6400+ -o2 -ox -ms -pden -DOPENSSL_SMALL_FOOTPRINT",
threads("-D_REENTRANT")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
bn_ops => "BN_LLONG",
C64x+ assembly pack: add ChaCha20 and Poly1305 modules. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-12-15 20:52:01 +00:00
cpuid_asm_src => "c64xpluscpuid.s",
bn_asm_src => "asm/bn-c64xplus.asm c64xplus-gf2m.s",
aes_asm_src => "aes-c64xplus.s aes_cbc.c aes-ctr.fake",
sha1_asm_src => "sha1-c64xplus.s sha256-c64xplus.s sha512-c64xplus.s",
rc4_asm_src => "rc4-c64xplus.s",
modes_asm_src => "ghash-c64xplus.s",
chacha_asm_src => "chacha-c64xplus.s",
poly1305_asm_src => "poly1305-c64xplus.s",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "void",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "--pic",
Link using -znodelete Instead of deliberately leaking a reference to ourselves, use nodelete which does this more neatly. Only for Linux at the moment. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-10-18 14:11:57 +00:00
shared_ldflag => add("-z --sysv --shared"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
ranlib => "true",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### Android: linux-* but without pointers to headers and libs.
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
#
# It takes pair of prior-set environment variables to make it work:
#
Configurations/10-main.conf: fix omittions in commentary. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 18:50:08 +00:00
# CROSS_SYSROOT=/some/where/android-ndk-<ver>/platforms/android-<apiver>/arch-<arch>
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
# CROSS_COMPILE=<prefix>
#
# As well as PATH adjusted to cover ${CROSS_COMPILE}gcc and company.
# For example to compile for ICS and ARM with NDK 10d, you'd:
#
# ANDROID_NDK=/some/where/android-ndk-10d
# CROSS_SYSROOT=$ANDROID_NDK/platforms/android-14/arch-arm
# CROSS_COMPILE=arm-linux-adroideabi-
Configurations/10-main.conf: fix omittions in commentary. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 18:50:08 +00:00
# PATH=$ANDROID_NDK/toolchains/arm-linux-androideabi-4.8/prebuild/linux-x86_64/bin
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"android" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "linux-generic32" ],
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
# Special note about unconditional -fPIC and -pie. The underlying
# reason is that Lollipop refuses to run non-PIE. But what about
# older systems and NDKs? -fPIC was never problem, so the only
Android build fixes. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-05-01 11:35:31 +00:00
# concern is -pie. Older toolchains, e.g. r4, appear to handle it
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
# and binaries turn mostly functional. "Mostly" means that oldest
# Androids, such as Froyo, fail to handle executable, but newer
# systems are perfectly capable of executing binaries targeting
# Froyo. Keep in mind that in the nutshell Android builds are
# about JNI, i.e. shared libraries, not applications.
Android build fixes. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-05-01 11:35:31 +00:00
cflags => add(picker(default => "-mandroid -fPIC --sysroot=\$(CROSS_SYSROOT) -Wa,--noexecstack")),
bin_cflags => "-pie",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"android-x86" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "android", asm("x86_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add(picker(release => "-fomit-frame-pointer")),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
perlasm_scheme => "android",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
################################################################
# Contemporary Android applications can provide multiple JNI
# providers in .apk, targeting multiple architectures. Among
# them there is "place" for two ARM flavours: generic eabi and
# armv7-a/hard-float. However, it should be noted that OpenSSL's
# ability to engage NEON is not constrained by ABI choice, nor
# is your ability to call OpenSSL from your application code
# compiled with floating-point ABI other than default 'soft'.
# [Latter thanks to __attribute__((pcs("aapcs"))) declaration.]
# This means that choice of ARM libraries you provide in .apk
# is driven by application needs. For example if application
# itself benefits from NEON or is floating-point intensive, then
# it might be appropriate to provide both libraries. Otherwise
# just generic eabi would do. But in latter case it would be
# appropriate to
#
# ./Configure android-armeabi -D__ARM_MAX_ARCH__=8
#
# in order to build "universal" binary and allow OpenSSL take
# advantage of NEON when it's available.
#
"android-armeabi" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "android", asm("armv4_asm") ],
Configure: android-arm facelift. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-03-30 14:47:57 +00:00
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"android-mips" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "android", asm("mips32_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "o32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: add initial support for 64-bit Android. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-02 21:18:10 +00:00
"android64" => {
inherit_from => [ "linux-generic64" ],
Android build fixes. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-05-01 11:35:31 +00:00
cflags => add(picker(default => "-mandroid -fPIC --sysroot=\$(CROSS_SYSROOT) -Wa,--noexecstack")),
bin_cflags => "-pie",
Configure: add initial support for 64-bit Android. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-02 21:18:10 +00:00
},
"android64-aarch64" => {
inherit_from => [ "android64", asm("aarch64_asm") ],
perlasm_scheme => "linux64",
Configurations/10-main.conf: add android64-x86_64 target. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-31 18:50:56 +00:00
},
"android64-x86_64" => {
inherit_from => [ "android64", asm("x86_64_asm") ],
perlasm_scheme => "elf",
Configurations/10-main.conf: add android64-mips64 target. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-01 08:46:08 +00:00
},
"android64-mips64" => {
############################################################
# You are more than likely have to specify target processor
# on ./Configure command line. Trouble is that toolchain's
# default is MIPS64r6 (at least in r10d), but there are no
# such processors around (or they are too rare to spot one).
# Actual problem is that MIPS64r6 is binary incompatible
# with previous MIPS ISA versions, in sense that unlike
# prior versions original MIPS binary code will fail.
#
inherit_from => [ "android64", asm("mips64_asm") ],
perlasm_scheme => "64",
Configure: add initial support for 64-bit Android. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-02 21:18:10 +00:00
},
Configure: remove unused variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-18 15:56:38 +00:00
#### *BSD
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BSD-generic32" => {
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
# As for thread cflag. Idea is to maintain "collective" set of
Configure: remove unused variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-18 15:56:38 +00:00
# flags, which would cover all BSD flavors. -pthread applies
# to them all, but is treated differently. OpenBSD expands is
# as -D_POSIX_THREAD -lc_r, which is sufficient. FreeBSD 4.x
# expands it as -lc_r, which has to be accompanied by explicit
# -D_THREAD_SAFE and sometimes -D_REENTRANT. FreeBSD 5.x
# expands it as -lc_r, which seems to be sufficient?
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Build with --strict-warnings on FreeBSD. Reviewed-by: Rich Salz <rsalz@openssl.org>
2015-08-02 01:21:46 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-Wall",
debug => "-O0 -g",
release => "-O3"),
threads("-pthread -D_THREAD_SAFE -D_REENTRANT")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"BSD-generic64" => {
inherit_from => [ "BSD-generic32" ],
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"BSD-x86" => {
inherit_from => [ "BSD-generic32", asm("x86_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add(picker(default => "-DL_ENDIAN",
release => "-fomit-frame-pointer")),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_target => "bsd-shared",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
perlasm_scheme => "a.out",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"BSD-x86-elf" => {
inherit_from => [ "BSD-x86" ],
perlasm_scheme => "elf",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"BSD-sparcv8" => {
inherit_from => [ "BSD-generic32", asm("sparcv8_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-mcpu=v8 -DB_ENDIAN"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"BSD-sparc64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# -DMD32_REG_T=int doesn't actually belong in sparc64 target, it
# simply *happens* to work around a compiler bug in gcc 3.3.3,
# triggered by RIPEMD160 code.
inherit_from => [ "BSD-generic64", asm("sparcv9_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-DB_ENDIAN -DMD32_REG_T=int"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BSD-ia64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "BSD-generic64", asm("ia64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add_before("-DL_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BSD-x86_64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "BSD-generic64", asm("x86_64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add_before("-DL_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"bsdi-elf-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Remove all -march= from configs These flags are limitting needlessly, are often patched by packagers, and should be specified on the configuration command line by anyone who desires for it to be specific rather than forced by us. This work was already done with mingw when those configs were worked on, now it gets applied to the remaining configs. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-22 20:02:42 +00:00
cflags => "-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -Wall",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-ldl"),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"nextstep" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
cflags => "-O -Wall",
unistd => "<libc.h>",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"nextstep3.3" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
cflags => "-O3 -Wall",
unistd => "<libc.h>",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# QNX
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"qnx4" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
cflags => "-DL_ENDIAN -DTERMIO",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"QNX6" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"QNX6-i386" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
cflags => "-DL_ENDIAN -O2 -Wall",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SCO/Caldera targets.
#
# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
# Now we only have blended unixware-* as it's the only one used by ./config.
# If you want to optimize for particular microarchitecture, bypass ./config
# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
# Note that not all targets include assembler support. Mostly because of
# lack of motivation to support out-of-date platforms with out-of-date
# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
# patiently assisted to debug most of it.
#
# UnixWare 2.0x fails destest with -O.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"unixware-2.0" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("-DFILIO_H -DNO_STRINGS_H",
threads("-Kthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl -lresolv -lx"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "uithreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"unixware-2.1" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("-O -DFILIO_H",
threads("-Kthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl -lresolv -lx"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "uithreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"unixware-7" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("-O -DFILIO_H -Kalloca",
threads("-Kthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "uithreads",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "svr5-shared",
shared_cflag => "-Kpic",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"unixware-7-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -Wall",
threads("-D_REENTRANT")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl"),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "gnu-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"sco5-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
cflags => "-belf",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "svr3-shared",
shared_cflag => "-Kpic",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"sco5-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
cflags => "-O3 -fomit-frame-pointer",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl"),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "svr3-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### IBM's AIX.
Configurations/10-main.cf: AIX "facelift". Improve interchangeability of aix*-gcc targets by linking shared libraries with -static-libgcc, and address linking problems with vendor compiler. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-03 20:03:55 +00:00
# Below targets assume AIX >=5. Caveat lector. If you are accustomed
# to control compilation "bitness" by setting $OBJECT_MODE environment
# variable, then you should know that in OpenSSL case it's considered
# only in ./config. Once configured, build procedure remains "deaf" to
# current value of $OBJECT_MODE.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"aix-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ppc32_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-DB_ENDIAN",
debug => "-O0 -g",
release => "-O"),
threads("-pthread")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "AIX",
bn_ops => "BN_LLONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "aix32",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
Configurations/10-main.cf: AIX "facelift". Improve interchangeability of aix*-gcc targets by linking shared libraries with -static-libgcc, and address linking problems with vendor compiler. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-03 20:03:55 +00:00
shared_ldflag => "-shared -static-libgcc -Wl,-G",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X32",
},
"aix64-gcc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ppc64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-maix64 -DB_ENDIAN",
debug => "-O0 -g",
release => "-O"),
threads("-pthread")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "AIX",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "aix64",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
Configurations/10-main.cf: AIX "facelift". Improve interchangeability of aix*-gcc targets by linking shared libraries with -static-libgcc, and address linking problems with vendor compiler. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-03 20:03:55 +00:00
shared_ldflag => "-maix64 -shared -static-libgcc -Wl,-G",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X64",
},
"aix-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ppc32_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-q32 -DB_ENDIAN -qmaxmem=16384 -qro -qroconst",
debug => "-O0 -g",
release => "-O"),
threads("-qthreaded -D_THREAD_SAFE")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "AIX",
bn_ops => "BN_LLONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Configurations/10-main.cf: AIX "facelift". Improve interchangeability of aix*-gcc targets by linking shared libraries with -static-libgcc, and address linking problems with vendor compiler. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-03 20:03:55 +00:00
ex_libs => threads("-lpthreads"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "aix32",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
shared_ldflag => "-q32 -G",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X 32",
},
"aix64-cc" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("ppc64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-q64 -DB_ENDIAN -qmaxmem=16384 -qro -qroconst",
debug => "-O0 -g",
release => "-O"),
threads("-qthreaded -D_THREAD_SAFE")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "AIX",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Configurations/10-main.cf: AIX "facelift". Improve interchangeability of aix*-gcc targets by linking shared libraries with -static-libgcc, and address linking problems with vendor compiler. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-09-03 20:03:55 +00:00
ex_libs => threads("-lpthreads"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "aix64",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
shared_ldflag => "-q64 -G",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X 64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# SIEMENS BS2000/OSD: an EBCDIC-based mainframe
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BS2000-OSD" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "c89",
cflags => "-O -XLLML -XLLMK -XL -DB_ENDIAN -DCHARSET_EBCDIC",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lsocket -lnsl"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "THIRTY_TWO_BIT RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# OS/390 Unix an EBCDIC-based Unix system on IBM mainframe
# You need to compile using the c89.sh wrapper in the tools directory, because the
# IBM compiler does not like the -L switch after any object modules.
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"OS390-Unix" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "c89.sh",
cflags => "-O -DB_ENDIAN -DCHARSET_EBCDIC -DNO_SYS_PARAM_H -D_ALL_SOURCE",
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "THIRTY_TWO_BIT RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "(unknown)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### Visual C targets
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#
# Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
#
# Note about -wd4090, disable warning C4090. This warning returns false
# positives in some situations. Disabling it altogether masks both
# legitimate and false cases, but as we compile on multiple platforms,
# we rely on other compilers to catch legitimate cases.
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
#
# Also note that we force threads no matter what. Configuring "no-threads"
# is ignored.
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"VC-common" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_Windows" ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
template => 1,
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cl",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
cflags => "-W3 -wd4090 -Gs0 -GF -Gy -nologo -DOPENSSL_SYS_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE",
Remake the way dynamic zlib is loaded Instead of absolute hard coding of the libz library name, have it use the macro LIBZ, which is set to defaults we know in case it's undefined. This allows our configuration to set something that's sane on current or older platforms, and allows the user to override it by defining LIBZ themselves. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:12:53 +00:00
defines => add(sub { my @defs = ();
unless ($disabled{"zlib-dynamic"}) {
Fix the LIBZ macro on VC config targets If zlib-dynamic was given but not --with-zlib-lib, LIBZ was defined to the empty string. Instead, give it the default "ZLIB1". Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1772)
2016-10-24 13:03:57 +00:00
my $zlib =
$withargs{zlib_lib} // "ZLIB1";
Remake the way dynamic zlib is loaded Instead of absolute hard coding of the libz library name, have it use the macro LIBZ, which is set to defaults we know in case it's undefined. This allows our configuration to set something that's sane on current or older platforms, and allows the user to override it by defining LIBZ themselves. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:12:53 +00:00
push @defs,
quotify("perl",
Fix the LIBZ macro on VC config targets If zlib-dynamic was given but not --with-zlib-lib, LIBZ was defined to the empty string. Instead, give it the default "ZLIB1". Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1772)
2016-10-24 13:03:57 +00:00
'LIBZ="' . $zlib . '"');
Remake the way dynamic zlib is loaded Instead of absolute hard coding of the libz library name, have it use the macro LIBZ, which is set to defaults we know in case it's undefined. This allows our configuration to set something that's sane on current or older platforms, and allows the user to override it by defining LIBZ themselves. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:12:53 +00:00
}
return [ @defs ];
}),
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
coutflag => "/Fo",
Windows: When installing libraries and executables, install .pdb files as well Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-05-12 16:08:21 +00:00
lib_cflags => add("/Zi /Fdossl_static"),
dso_cflags => "/Zi /Fddso",
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
bin_cflags => "/Zi /Fdapp",
lflags => add("/debug"),
shared_ldflag => "/dll",
Add a shared_target to the VC-common config This has no real meaning, except it gives Configure a hint that VC targets are indeed capable of producing shared objects. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-03-02 13:10:21 +00:00
shared_target => "win-shared", # meaningless except it gives Configure a hint
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
thread_scheme => "winthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "win32",
apps/openssl.c: UTF-y Windows argv. Windows never composes UTF-8 strings as result of user interaction such as passing command-line argument. The only way to compose one is programmatic conversion from WCHAR string, which in turn can be picked up on command line. [For reference, why not wmain, it's not an option on MinGW.] Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-16 21:21:39 +00:00
apps_aux_src => add("win32_init.c"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
"VC-noCE-common" => {
Windows build system: get uplink right. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-18 22:31:17 +00:00
inherit_from => [ "VC-common" ],
Mark VC templates correctly. VC-noCE-common and VC-WIN64-common were missing this line: template => 1, Fixes GH#1809 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1811)
2016-10-31 15:40:36 +00:00
template => 1,
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
cflags => add(picker(default => "-DUNICODE -D_UNICODE",
debug =>
sub {
Configurations/10-main.conf: omit now redundant -D_WINDLL. ... and refine /MT vs. /MD flag handling. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-04-06 15:33:03 +00:00
($disabled{shared} ? "" : "/MDd")
." /Od -DDEBUG -D_DEBUG";
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
},
release =>
sub {
Configurations/10-main.conf: omit now redundant -D_WINDLL. ... and refine /MT vs. /MD flag handling. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-04-06 15:33:03 +00:00
($disabled{shared} ? "" : "/MD")
Small MSVC build fixes. - "/Ox /O2 /Ob2" get's reduced to "/O2", the reason being: /Ox = /Ob2 /Og /Oi /Ot /Oy /Gs /O2 = /Ob2 /Og /Oi /Ot /Oy /Gs /GF /Gy - apps/openssl.cnf gets installed. - always delete files quietly, as they might not be there. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1075)
2016-05-16 07:48:15 +00:00
." /O2";
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
})),
Configurations/10-main.conf: omit now redundant -D_WINDLL. ... and refine /MT vs. /MD flag handling. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-04-06 15:33:03 +00:00
lib_cflags => add(sub { $disabled{shared} ? "/MT /Zl" : () }),
# Following might/should appears controversial, i.e. defining
# /MDd without evaluating $disabled{shared}. It works in
# non-shared build because static library is compiled with /Zl
# and bares no reference to specific RTL. And it works in
# shared build because multiple /MDd options are not prohibited.
# But why /MDd in static build? Well, basically this is just a
# reference point, which allows to catch eventual errors that
# would prevent those who want to wrap OpenSSL into own .DLL.
# Why not /MD in release build then? Well, some are likely to
# prefer [non-debug] openssl.exe to be free from Micorosoft RTL
# redistributable.
bin_cflags => add(picker(debug => "/MDd",
release => sub { $disabled{shared} ? "/MT" : () },
)),
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
bin_lflags => add("/subsystem:console /opt:ref"),
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
ex_libs => add(sub {
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my @ex_libs = ();
push @ex_libs, 'ws2_32.lib' unless $disabled{sock};
push @ex_libs, 'gdi32.lib advapi32.lib crypt32.lib user32.lib';
return join(" ", @ex_libs);
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
}),
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
},
"VC-WIN64-common" => {
inherit_from => [ "VC-noCE-common" ],
Mark VC templates correctly. VC-noCE-common and VC-WIN64-common were missing this line: template => 1, Fixes GH#1809 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1811)
2016-10-31 15:40:36 +00:00
template => 1,
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
ex_libs => add(sub {
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my @ex_libs = ();
push @ex_libs, 'bufferoverflowu.lib' if (`cl 2>&1` =~ /14\.00\.4[0-9]{4}\./);
return join(" ", @_, @ex_libs);
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
}),
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
bn_ops => "SIXTY_FOUR_BIT EXPORT_VAR_AS_FN",
build_scheme => add("VC-W64", { separator => undef }),
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"VC-WIN64I" => {
Windows build system: get uplink right. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-18 22:31:17 +00:00
inherit_from => [ "VC-WIN64-common", asm("ia64_asm"),
sub { $disabled{shared} ? () : "ia64_uplink" } ],
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
as => "ias",
asflags => "-d debug",
asoutflag => "-o",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "WIN64I",
Build system: VC-WIN64I fixups. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-23 19:33:29 +00:00
bn_asm_src => sub { return undef unless @_;
my $r=join(" ",@_); $r=~s|bn-ia64.s|bn_asm.c|; $r; },
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "ias",
Build system: VC-WIN64I fixups. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-23 19:33:29 +00:00
multilib => "-ia64",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"VC-WIN64A" => {
Windows build system: get uplink right. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-18 22:31:17 +00:00
inherit_from => [ "VC-WIN64-common", asm("x86_64_asm"),
sub { $disabled{shared} ? () : "x86_64_uplink" } ],
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
as => sub { vc_win64a_info()->{as} },
asflags => sub { vc_win64a_info()->{asflags} },
asoutflag => sub { vc_win64a_info()->{asoutflag} },
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "WIN64A",
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
bn_asm_src => sub { return undef unless @_;
my $r=join(" ",@_); $r=~s|asm/x86_64-gcc|bn_asm|; $r; },
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "auto",
Build system: VC-WIN64I fixups. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-23 19:33:29 +00:00
multilib => "-x64",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"VC-WIN32" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# x86 Win32 target defaults to ANSI API, if you want UNICODE,
# configure with 'perl Configure VC-WIN32 -DUNICODE -D_UNICODE'
Windows build system: get uplink right. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-18 22:31:17 +00:00
inherit_from => [ "VC-noCE-common", asm("x86_asm"),
Windows build system: fix 32-bit appveyor build. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-23 20:04:22 +00:00
sub { $disabled{shared} ? () : "uplink_common" } ],
Only allow Microsoft assembler with no-asm on Windows This also restores the possibility to have ml used with VC-WIN32 with no-asm, which was lost during the mk1mf -> unified transition. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-18 18:15:33 +00:00
as => sub { vc_win32_info()->{as} },
asflags => sub { vc_win32_info()->{asflags} },
asoutflag => sub { vc_win32_info()->{asoutflag} },
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
ex_libs => add(sub {
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my @ex_libs = ();
# WIN32 UNICODE build gets linked with unicows.lib for
# backward compatibility with Win9x.
push @ex_libs, 'unicows.lib'
if (grep { $_ eq "UNICODE" } @user_defines);
return join(" ", @ex_libs, @_);
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
}),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "WIN32",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG EXPORT_VAR_AS_FN",
Typo, asoutflag -> perlasm_scheme Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-04-19 21:22:55 +00:00
perlasm_scheme => sub { vc_win32_info()->{perlasm_scheme} },
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
build_scheme => add("VC-W32", { separator => undef }),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"VC-CE" => {
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
inherit_from => [ "VC-common" ],
as => "ml",
asflags => "/nologo /Cp /coff /c /Cx /Zi",
asoutflag => "/Fo",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cl",
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
cflags =>
picker(default =>
combine('/W3 /WX /GF /Gy /nologo -DUNICODE -D_UNICODE -DOPENSSL_SYS_WINCE -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DDSO_WIN32 -DNO_CHMOD -DOPENSSL_SMALL_FOOTPRINT',
sub { vc_wince_info()->{cflags}; },
sub { defined($ENV{'WCECOMPAT'})
? '-I$(WCECOMPAT)/include' : (); },
sub { defined($ENV{'PORTSDK_LIBPATH'})
? '-I$(PORTSDK_LIBPATH)/../../include' : (); },
sub { `cl 2>&1` =~ /Version ([0-9]+)\./ && $1>=14
? ($disabled{shared} ? " /MT" : " /MD")
: " /MC"; }),
debug => "/Od -DDEBUG -D_DEBUG",
release => "/O1i"),
lflags => combine("/nologo /opt:ref",
sub { vc_wince_info()->{lflags}; },
sub { defined($ENV{PORTSDK_LIBPATH})
? "/entry:mainCRTstartup" : (); }),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "WINCE",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG EXPORT_VAR_AS_FN",
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
ex_libs => add(sub {
Unified - extract settings from util/pl/VC-32.pl and make the config settings This introduces the settings loutflag and aroutflag, because different Windows tools that do the same thing have different ways to specify the output file. The Borland C++ config is commented away for the monent, perhaps permanently. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-02 15:12:22 +00:00
my @ex_libs = ();
push @ex_libs, 'ws2.lib' unless $disabled{sock};
push @ex_libs, 'crypt32.lib';
if (defined($ENV{WCECOMPAT})) {
my $x = '$(WCECOMPAT)/lib';
if (-f "$x/$ENV{TARGETCPU}/wcecompatex.lib") {
$x .= '/$(TARGETCPU)/wcecompatex.lib';
} else {
$x .= '/wcecompatex.lib';
}
push @ex_libs, $x;
}
push @ex_libs, '$(PORTSDK_LIBPATH)/portlib.lib'
if (defined($ENV{'PORTSDK_LIBPATH'}));
push @ex_libs, ' /nodefaultlib coredll.lib corelibc.lib'
if ($ENV{'TARGETCPU'} eq "X86");
return @ex_libs;
ex_libs settings have to be added to, not overriden, on Windows too Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-15 05:53:17 +00:00
}),
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
build_scheme => add("VC-WCE", { separator => undef }),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### MinGW
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"mingw" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_asm"),
Clean away $config{no_shared} since we have $disabled{shared} Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-22 12:52:46 +00:00
sub { $disabled{shared} ? () : "x86_uplink" } ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-DL_ENDIAN -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE -m32 -Wall",
debug => "-g -O0",
release => "-O3 -fomit-frame-pointer"),
threads("-D_MT")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "MINGW32",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lws2_32 -lgdi32 -lcrypt32"),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG EXPORT_VAR_AS_FN",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "winthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "coff",
dso_scheme => "win32",
Big rename fest of MingW shared libraries So far, MingW shared libraries were named like this libeay32.dll + libeay32.dll.a ssleay32.dll + ssleay32.dll.a That naming scheme is antiquated, a reminicense of SSLeay. We're therefore changing the scheme to something that's more like the rest of OpenSSL. There are two factors to remember: - Windows libraries have no recorded SOvers, which means that the shared library version must be encoded in the name. According to some, it's unwise to encode extra periods in a Windows file name, so we convert version number periods to underscores. - MingW has multilib ability. However, DLLs need to reside with the binaries that use them, so to allow both 32-bit and 64-bit DLLs to reside in the same place, we add '-x64' in the name of the 64-bit ones. The resulting name scheme (for SOver 1.1) is this: on x86: libcrypto-1_1.dll + libcrypto.dll.a libssl-1_1.dll + libssl.dll.a on x86_64: libcrypto-1_1-x64.dll + libcrypto.dll.a libssl-1_1-x64.dll + libssl.dll.a An observation is that the import lib is the same for both architectures. Not to worry, though, as they will be installed in PREFIX/lib/ for x86 and PREFIX/lib64/ for x86_64. As a side effect, MingW got its own targets in Makefile.shared. link_dso.mingw-shared and link_app.mingw-shared are aliases for the corresponding cygwin-shared targets. link_shlib.mingw-shared is, however, a target separated from the cygwin one. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-16 19:37:28 +00:00
shared_target => "mingw-shared",
Configure - neater looking add() and add_before() They now default to " " as separator, but that can be overridden by having a hash with parameters as last argument. The only currently recognised parameter is `separator'. The special separator `undef' will force the result to become a list rather than a concatenated string. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-24 23:17:59 +00:00
shared_cflag => add("-D_WINDLL"),
Modernise the mingw cflags and ldflags Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-05 14:14:45 +00:00
shared_ldflag => "-static-libgcc",
Add support for shared_rcflag, useful for windres (Cygwin and Mingw) Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-05 14:17:33 +00:00
shared_rcflag => "--target=pe-i386",
unified build scheme: add the tweaks to build on Cygwin & Mingw Cygwin and Mingw name their libraries a bit differently from the rest of the POSIXly universe, we need to adapt to that. In Makefile.tmpl, it means that some hunks will only be output conditionally. This also means that shared_extension for the Cygwin and Mingw configurations in Configurations/10-main.conf are changing from .dll.a to .dll. Makefile.shared does a fine job without having them specified, and it's much easier to work with tucking an extra .a at the end of files in the installation recipes than any amount of name rewrites, especially with the support of the SHARED_NAME in the top build.info. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 04:45:29 +00:00
shared_extension => ".dll",
Big rename fest of MingW shared libraries So far, MingW shared libraries were named like this libeay32.dll + libeay32.dll.a ssleay32.dll + ssleay32.dll.a That naming scheme is antiquated, a reminicense of SSLeay. We're therefore changing the scheme to something that's more like the rest of OpenSSL. There are two factors to remember: - Windows libraries have no recorded SOvers, which means that the shared library version must be encoded in the name. According to some, it's unwise to encode extra periods in a Windows file name, so we convert version number periods to underscores. - MingW has multilib ability. However, DLLs need to reside with the binaries that use them, so to allow both 32-bit and 64-bit DLLs to reside in the same place, we add '-x64' in the name of the 64-bit ones. The resulting name scheme (for SOver 1.1) is this: on x86: libcrypto-1_1.dll + libcrypto.dll.a libssl-1_1.dll + libssl.dll.a on x86_64: libcrypto-1_1-x64.dll + libcrypto.dll.a libssl-1_1-x64.dll + libssl.dll.a An observation is that the import lib is the same for both architectures. Not to worry, though, as they will be installed in PREFIX/lib/ for x86 and PREFIX/lib64/ for x86_64. As a side effect, MingW got its own targets in Makefile.shared. link_dso.mingw-shared and link_app.mingw-shared are aliases for the corresponding cygwin-shared targets. link_shlib.mingw-shared is, however, a target separated from the cygwin one. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-16 19:37:28 +00:00
multilib => "",
apps/openssl.c: UTF-y Windows argv. Windows never composes UTF-8 strings as result of user interaction such as passing command-line argument. The only way to compose one is programmatic conversion from WCHAR string, which in turn can be picked up on command line. [For reference, why not wmain, it's not an option on MinGW.] Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-16 21:21:39 +00:00
apps_aux_src => add("win32_init.c"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"mingw64" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# As for OPENSSL_USE_APPLINK. Applink makes it possible to use
# .dll compiled with one compiler with application compiled with
# another compiler. It's possible to engage Applink support in
# mingw64 build, but it's not done, because till mingw64
# supports structured exception handling, one can't seriously
# consider its binaries for using with non-mingw64 run-time
# environment. And as mingw64 is always consistent with itself,
# Applink is never engaged and can as well be omitted.
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_64_asm") ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "-DL_ENDIAN -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE -m64 -Wall",
debug => "-g -O0",
release => "-O3"),
threads("-D_MT")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "MINGW64",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-lws2_32 -lgdi32 -lcrypt32"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT EXPORT_VAR_AS_FN",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "winthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "mingw64",
dso_scheme => "win32",
Big rename fest of MingW shared libraries So far, MingW shared libraries were named like this libeay32.dll + libeay32.dll.a ssleay32.dll + ssleay32.dll.a That naming scheme is antiquated, a reminicense of SSLeay. We're therefore changing the scheme to something that's more like the rest of OpenSSL. There are two factors to remember: - Windows libraries have no recorded SOvers, which means that the shared library version must be encoded in the name. According to some, it's unwise to encode extra periods in a Windows file name, so we convert version number periods to underscores. - MingW has multilib ability. However, DLLs need to reside with the binaries that use them, so to allow both 32-bit and 64-bit DLLs to reside in the same place, we add '-x64' in the name of the 64-bit ones. The resulting name scheme (for SOver 1.1) is this: on x86: libcrypto-1_1.dll + libcrypto.dll.a libssl-1_1.dll + libssl.dll.a on x86_64: libcrypto-1_1-x64.dll + libcrypto.dll.a libssl-1_1-x64.dll + libssl.dll.a An observation is that the import lib is the same for both architectures. Not to worry, though, as they will be installed in PREFIX/lib/ for x86 and PREFIX/lib64/ for x86_64. As a side effect, MingW got its own targets in Makefile.shared. link_dso.mingw-shared and link_app.mingw-shared are aliases for the corresponding cygwin-shared targets. link_shlib.mingw-shared is, however, a target separated from the cygwin one. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-16 19:37:28 +00:00
shared_target => "mingw-shared",
Configure - neater looking add() and add_before() They now default to " " as separator, but that can be overridden by having a hash with parameters as last argument. The only currently recognised parameter is `separator'. The special separator `undef' will force the result to become a list rather than a concatenated string. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-24 23:17:59 +00:00
shared_cflag => add("-D_WINDLL"),
Modernise the mingw cflags and ldflags Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-05 14:14:45 +00:00
shared_ldflag => "-static-libgcc",
Add support for shared_rcflag, useful for windres (Cygwin and Mingw) Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-02-05 14:17:33 +00:00
shared_rcflag => "--target=pe-x86-64",
unified build scheme: add the tweaks to build on Cygwin & Mingw Cygwin and Mingw name their libraries a bit differently from the rest of the POSIXly universe, we need to adapt to that. In Makefile.tmpl, it means that some hunks will only be output conditionally. This also means that shared_extension for the Cygwin and Mingw configurations in Configurations/10-main.conf are changing from .dll.a to .dll. Makefile.shared does a fine job without having them specified, and it's much easier to work with tucking an extra .a at the end of files in the installation recipes than any amount of name rewrites, especially with the support of the SHARED_NAME in the top build.info. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 04:45:29 +00:00
shared_extension => ".dll",
Big rename fest of MingW shared libraries So far, MingW shared libraries were named like this libeay32.dll + libeay32.dll.a ssleay32.dll + ssleay32.dll.a That naming scheme is antiquated, a reminicense of SSLeay. We're therefore changing the scheme to something that's more like the rest of OpenSSL. There are two factors to remember: - Windows libraries have no recorded SOvers, which means that the shared library version must be encoded in the name. According to some, it's unwise to encode extra periods in a Windows file name, so we convert version number periods to underscores. - MingW has multilib ability. However, DLLs need to reside with the binaries that use them, so to allow both 32-bit and 64-bit DLLs to reside in the same place, we add '-x64' in the name of the 64-bit ones. The resulting name scheme (for SOver 1.1) is this: on x86: libcrypto-1_1.dll + libcrypto.dll.a libssl-1_1.dll + libssl.dll.a on x86_64: libcrypto-1_1-x64.dll + libcrypto.dll.a libssl-1_1-x64.dll + libssl.dll.a An observation is that the import lib is the same for both architectures. Not to worry, though, as they will be installed in PREFIX/lib/ for x86 and PREFIX/lib64/ for x86_64. As a side effect, MingW got its own targets in Makefile.shared. link_dso.mingw-shared and link_app.mingw-shared are aliases for the corresponding cygwin-shared targets. link_shlib.mingw-shared is, however, a target separated from the cygwin one. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-16 19:37:28 +00:00
multilib => "64",
apps/openssl.c: UTF-y Windows argv. Windows never composes UTF-8 strings as result of user interaction such as passing command-line argument. The only way to compose one is programmatic conversion from WCHAR string, which in turn can be picked up on command line. [For reference, why not wmain, it's not an option on MinGW.] Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-16 21:21:39 +00:00
apps_aux_src => add("win32_init.c"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
RT3969: Add OPENSSL_SYS_UEFI This provides support for building in the EDK II reference implementation of UEFI. Most UEFI firmware in existence uses OpenSSL for implementing the core cryptographic functionality needed for Secure Boot. This has always previously been handled with external patches to OpenSSL but we are now making a concerted effort to eliminate those. In this mode, we don't actually use the OpenSSL makefiles; we process the MINFO file generated by 'make files' and incorporate it into the EDK2 build system. Since EDK II builds for various targets with varying word size and we need to have a single prepackaged configuration, we deliberately don't hard-code the setting of SIXTY_FOUR_BIT vs. THIRTY_TWO_BIT in opensslconf.h. We bypass that for OPENSSL_SYS_UEFI and allow EDK II itself to set those, depending on the architecture. For x86_64, EDK II sets SIXTY_FOUR_BIT and thus uses 'long long' for the 64-bit type, even when building with GCC where 'long' is also 64-bit. We do this because the Microsoft toolchain has 32-bit 'long'. Signed-off-by: Rich Salz <rsalz@akamai.com> Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-09-09 02:51:17 +00:00
#### UEFI
"UEFI" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
RT3969: Add OPENSSL_SYS_UEFI This provides support for building in the EDK II reference implementation of UEFI. Most UEFI firmware in existence uses OpenSSL for implementing the core cryptographic functionality needed for Secure Boot. This has always previously been handled with external patches to OpenSSL but we are now making a concerted effort to eliminate those. In this mode, we don't actually use the OpenSSL makefiles; we process the MINFO file generated by 'make files' and incorporate it into the EDK2 build system. Since EDK II builds for various targets with varying word size and we need to have a single prepackaged configuration, we deliberately don't hard-code the setting of SIXTY_FOUR_BIT vs. THIRTY_TWO_BIT in opensslconf.h. We bypass that for OPENSSL_SYS_UEFI and allow EDK II itself to set those, depending on the architecture. For x86_64, EDK II sets SIXTY_FOUR_BIT and thus uses 'long long' for the 64-bit type, even when building with GCC where 'long' is also 64-bit. We do this because the Microsoft toolchain has 32-bit 'long'. Signed-off-by: Rich Salz <rsalz@akamai.com> Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-09-09 02:51:17 +00:00
cc => "cc",
cflags => "-DL_ENDIAN -O",
sys_id => "UEFI",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### UWIN
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"UWIN" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
cflags => "-DTERMIOS -DL_ENDIAN -O -Wall",
sys_id => "UWIN",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "win32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### Cygwin
Adjust the configuration target name from Cygwin-i686 to Cygwin-x86 This is to reflect that it's not limited to just i686. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-17 16:48:53 +00:00
"Cygwin-x86" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => picker(default => "-DTERMIOS -DL_ENDIAN -Wall",
debug => "-g -O0",
release => "-O3 -fomit-frame-pointer"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "CYGWIN",
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Cygwin configs were missing thread_scheme settings, add them Reviewed-by: Matt Caswell <matt@openssl.org>
2016-03-15 14:30:43 +00:00
thread_scheme => "pthread",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "coff",
dso_scheme => "dlfcn",
shared_target => "cygwin-shared",
shared_cflag => "-D_WINDLL",
shared_ldflag => "-shared",
unified build scheme: add the tweaks to build on Cygwin & Mingw Cygwin and Mingw name their libraries a bit differently from the rest of the POSIXly universe, we need to adapt to that. In Makefile.tmpl, it means that some hunks will only be output conditionally. This also means that shared_extension for the Cygwin and Mingw configurations in Configurations/10-main.conf are changing from .dll.a to .dll. Makefile.shared does a fine job without having them specified, and it's much easier to work with tucking an extra .a at the end of files in the installation recipes than any amount of name rewrites, especially with the support of the SHARED_NAME in the top build.info. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 04:45:29 +00:00
shared_extension => ".dll",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"Cygwin-x86_64" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("x86_64_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => picker(default => "-DTERMIOS -DL_ENDIAN -Wall",
debug => "-g -O0",
release => "-O3"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "CYGWIN",
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Cygwin configs were missing thread_scheme settings, add them Reviewed-by: Matt Caswell <matt@openssl.org>
2016-03-15 14:30:43 +00:00
thread_scheme => "pthread",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "mingw64",
dso_scheme => "dlfcn",
shared_target => "cygwin-shared",
shared_cflag => "-D_WINDLL",
shared_ldflag => "-shared",
unified build scheme: add the tweaks to build on Cygwin & Mingw Cygwin and Mingw name their libraries a bit differently from the rest of the POSIXly universe, we need to adapt to that. In Makefile.tmpl, it means that some hunks will only be output conditionally. This also means that shared_extension for the Cygwin and Mingw configurations in Configurations/10-main.conf are changing from .dll.a to .dll. Makefile.shared does a fine job without having them specified, and it's much easier to work with tucking an extra .a at the end of files in the installation recipes than any amount of name rewrites, especially with the support of the SHARED_NAME in the top build.info. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 04:45:29 +00:00
shared_extension => ".dll",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Add some extra Cygwin targets as aliases for Cygwin-x86 Cygwin was used for x86 before, so let's keep it around for those who still use it (it make Configure reconf possible). Cygwin-i[3456]86 for those that might generate and pass a target name directly to Configure. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-17 17:03:04 +00:00
# Backward compatibility for those using this target
"Cygwin" => {
inherit_from => [ "Cygwin-x86" ]
},
# In case someone constructs the Cygwin target name themself
"Cygwin-i386" => {
inherit_from => [ "Cygwin-x86" ]
},
"Cygwin-i486" => {
inherit_from => [ "Cygwin-x86" ]
},
"Cygwin-i586" => {
inherit_from => [ "Cygwin-x86" ]
},
"Cygwin-i686" => {
inherit_from => [ "Cygwin-x86" ]
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### MacOS X (a.k.a. Darwin) setup
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"darwin-common" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
template => 1,
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "cc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine(picker(default => "",
debug => "-g -O0",
release => "-O3"),
threads("-D_REENTRANT")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "MACOSX",
Enhance and clear the support of linker flags Some time ago, we had a ex_libs configuration setting that could be divided into lflags and ex_libs. These got divided in two settings, lflags and ex_libs, and the former was interpreted to be general linking flags. Unfortunately, that conclusion wasn't entirely accurate. Most of those linking were meant to end up in a very precise position on the linking command line, just before the spec of libraries the linking depends on. Back to the drawing board, we're diving things further, now having lflags, which are linking flags that aren't depending on command line position, plib_lflags, which are linking flags that should show up just before the spec of libraries to depend on, and finally ex_libs, which is the spec of extra libraries to depend on. Also, documentation is changed in Configurations/README. This was previously forgotten. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-02-05 10:47:14 +00:00
plib_lflags => "-Wl,-search_paths_first",
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_CHAR",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "osx32",
dso_scheme => "dlfcn",
No -fno-common for Darwin When object files with common block symbols are added to static libraries on Darwin, those symbols are invisible to the linker that tries to use them. Our solution was to use -fno-common when compiling C source. Unfortunately, there is assembler code that defines OPENSSL_ia32cap_P as a common block symbol, unconditionally, and in some cases, there is no other definition. -fno-common doesn't help in this case. However, 'ranlib -c' adds common block symbols to the index of the static library, which makes them visible to the linker using it, and that solves the problem we've seen. The common conclusion is, either use -fno-common or ranlib -c on Darwin. Since we have common block symbols unconditionally, choosing the method for our source is easy. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-03-04 12:48:59 +00:00
ranlib => "ranlib -c",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_target => "darwin-shared",
No -fno-common for Darwin When object files with common block symbols are added to static libraries on Darwin, those symbols are invisible to the linker that tries to use them. Our solution was to use -fno-common when compiling C source. Unfortunately, there is assembler code that defines OPENSSL_ia32cap_P as a common block symbol, unconditionally, and in some cases, there is no other definition. -fno-common doesn't help in this case. However, 'ranlib -c' adds common block symbols to the index of the static library, which makes them visible to the linker using it, and that solves the problem we've seen. The common conclusion is, either use -fno-common or ranlib -c on Darwin. Since we have common block symbols unconditionally, choosing the method for our source is easy. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-03-04 12:48:59 +00:00
shared_cflag => "-fPIC",
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
shared_ldflag => "-dynamiclib",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
Configurations/10-main.conf: freeze -std option in darwin*-ppc-cc. RT#4422 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-14 19:56:44 +00:00
# Option "freeze" such as -std=gnu9x can't negatively interfere
# with future defaults for below two targets, because MacOS X
# for PPC has no future, it was discontinued by vendor in 2009.
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
"darwin-ppc-cc" => {
inherit_from => [ "darwin-common", asm("ppc32_asm") ],
Configurations/10-main.conf: freeze -std option in darwin*-ppc-cc. RT#4422 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-14 19:56:44 +00:00
cflags => add("-arch ppc -std=gnu9x -DB_ENDIAN -Wa,-force_cpusubtype_ALL"),
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
perlasm_scheme => "osx32",
shared_ldflag => "-arch ppc -dynamiclib",
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"darwin64-ppc-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "darwin-common", asm("ppc64_asm") ],
Configurations/10-main.conf: freeze -std option in darwin*-ppc-cc. RT#4422 Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-03-14 19:56:44 +00:00
cflags => add("-arch ppc64 -std=gnu9x -DB_ENDIAN"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "osx64",
shared_ldflag => "-arch ppc64 -dynamiclib",
},
"darwin-i386-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "darwin-common", asm("x86_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add(picker(default => "-arch i386 -DL_ENDIAN",
release => "-fomit-frame-pointer")),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "BN_LLONG RC4_INT",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "macosx",
shared_ldflag => "-arch i386 -dynamiclib",
},
"darwin64-x86_64-cc" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "darwin-common", asm("x86_64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-arch x86_64 -DL_ENDIAN -Wall"),
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "macosx",
shared_ldflag => "-arch x86_64 -dynamiclib",
},
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### iPhoneOS/iOS
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#
# It takes three prior-set environment variables to make it work:
#
# CROSS_COMPILE=/where/toolchain/is/usr/bin/ [note ending slash]
# CROSS_TOP=/where/SDKs/are
# CROSS_SDK=iPhoneOSx.y.sdk
#
# Exact paths vary with Xcode releases, but for couple of last ones
# they would look like this:
#
# CROSS_COMPILE=`xcode-select --print-path`/Toolchains/XcodeDefault.xctoolchain/usr/bin/
# CROSS_TOP=`xcode-select --print-path`/Platforms/iPhoneOS.platform/Developer
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
# CROSS_SDK=iPhoneOS.sdk
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"iphoneos-cross" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "darwin-common" ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fno-common"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "iOS",
},
Add assembly support for 32-bit iOS. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-02 08:17:42 +00:00
"ios-cross" => {
inherit_from => [ "darwin-common", asm("armv4_asm") ],
# It should be possible to go below iOS 6 and even add -arch armv6,
# thus targeting iPhone pre-3GS, but it's assumed to be irrelevant
Configurations/10-main.conf: update iOS commentary. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-21 07:13:27 +00:00
# at this point.
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-arch armv7 -mios-version-min=6.0.0 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fno-common"),
Add assembly support for 32-bit iOS. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-02 08:17:42 +00:00
sys_id => "iOS",
perlasm_scheme => "ios32",
},
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"ios64-cross" => {
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ "darwin-common", asm("aarch64_asm") ],
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
cflags => add("-arch arm64 -mios-version-min=7.0.0 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fno-common"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "iOS",
Remove outdated legacy crypto options Many options for supporting optimizations for legacy crypto on legacy platforms have been removed. This simplifies the source code and does not really penalize anyone. DES_PTR (always on) DES_RISC1, DES_RISC2 (always off) DES_INT (always 'unsigned int') DES_UNROLL (always on) BF_PTR (always on) BF_PTR2 (removed) MD2_CHAR, MD2_LONG (always 'unsigned char') IDEA_SHORT, IDEA_LONG (always 'unsigned int') RC2_SHORT, RC2_LONG (always 'unsigned int') RC4_LONG (only int and char (for assembler) are supported) RC4_CHUNK (always long), RC_CHUNK_LL (removed) RC4_INDEX (always on) And also make D_ENCRYPT macro more clear (@appro) This is done in consultation with Andy. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-01-27 23:43:25 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "ios64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### GNU Hurd
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hurd-x86" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
inherit_from => [ asm("x86_elf_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "gcc",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("-DL_ENDIAN -O3 -fomit-frame-pointer -Wall",
threads("-pthread")),
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-ldl"),
Remove x86_gcc_des,x86_gcc_opts This is a followin from !1738, we no longer need those variables. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-01-28 00:16:38 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
Add Hurd shared extension Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #1345
2016-07-24 20:32:15 +00:00
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### VxWorks for various targets
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"vxworks-ppc60x" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccppc",
cflags => "-D_REENTRANT -mrtp -mhard-float -mstrict-align -fno-implicit-fp -DPPC32_fp60x -O2 -fstrength-reduce -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip",
sys_id => "VXWORKS",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"vxworks-ppcgen" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccppc",
cflags => "-D_REENTRANT -mrtp -msoft-float -mstrict-align -O1 -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip",
sys_id => "VXWORKS",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
},
"vxworks-ppc405" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccppc",
cflags => "-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-ppc750" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccppc",
cflags => "-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG)",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-ppc750-debug" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccppc",
Clean-up *_DEBUG options. Since NDEBUG is defined unconditionally on command line for release builds, we can omit *_DEBUG options in favour of effective "all-on" in debug builds exercised though CI. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Emilia Käsper <emilia@openssl.org>
2016-04-06 10:47:35 +00:00
cflags => "-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DPEDANTIC -DDEBUG -g",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-ppc860" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccppc",
cflags => "-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-simlinux" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccpentium",
cflags => "-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DL_ENDIAN -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/h -I\$(WIND_BASE)/target/h/wrn/coreip -DOPENSSL_NO_HW_PADLOCK",
sys_id => "VXWORKS",
lflags => "-r",
ranlib => "ranlibpentium",
},
"vxworks-mips" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix", asm("mips32_asm") ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "ccmips",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("-mrtp -mips2 -O -G 0 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DCPU=MIPS32 -msoft-float -mno-branch-likely -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/h/wrn/coreip",
threads("-D_REENTRANT")),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
sys_id => "VXWORKS",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon"),
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
perlasm_scheme => "o32",
ranlib => "ranlibmips",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Configure: fold related configurations more aggressively and clean-up. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-03-16 21:33:36 +00:00
#### uClinux
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"uClinux-dist" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "$ENV{'CC'}",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("\$(CFLAGS)",
threads("-D_REENTRANT")),
Enhance and clear the support of linker flags Some time ago, we had a ex_libs configuration setting that could be divided into lflags and ex_libs. These got divided in two settings, lflags and ex_libs, and the former was interpreted to be general linking flags. Unfortunately, that conclusion wasn't entirely accurate. Most of those linking were meant to end up in a very precise position on the linking command line, just before the spec of libraries the linking depends on. Back to the drawing board, we're diving things further, now having lflags, which are linking flags that aren't depending on command line position, plib_lflags, which are linking flags that should show up just before the spec of libraries to depend on, and finally ex_libs, which is the spec of extra libraries to depend on. Also, documentation is changed in Configurations/README. This was previously forgotten. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-02-05 10:47:14 +00:00
plib_lflags => "\$(LDFLAGS)",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("\$(LDLIBS)"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
bn_ops => "BN_LLONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "$ENV{'LIBSSL_dlfcn'}",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
ranlib => "$ENV{'RANLIB'}",
},
"uClinux-dist64" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_unix" ],
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
cc => "$ENV{'CC'}",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
cflags => combine("\$(CFLAGS)",
threads("-D_REENTRANT")),
Enhance and clear the support of linker flags Some time ago, we had a ex_libs configuration setting that could be divided into lflags and ex_libs. These got divided in two settings, lflags and ex_libs, and the former was interpreted to be general linking flags. Unfortunately, that conclusion wasn't entirely accurate. Most of those linking were meant to end up in a very precise position on the linking command line, just before the spec of libraries the linking depends on. Back to the drawing board, we're diving things further, now having lflags, which are linking flags that aren't depending on command line position, plib_lflags, which are linking flags that should show up just before the spec of libraries to depend on, and finally ex_libs, which is the spec of extra libraries to depend on. Also, documentation is changed in Configurations/README. This was previously forgotten. Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-02-05 10:47:14 +00:00
plib_lflags => "\$(LDFLAGS)",
Configure - move the addition of the zlib / libz lib to configs Configure had the Unix centric addition of -lz when linking with zlib is enabled, which doesn't work on other platforms. Therefore, we move it to the BASE_unix config template and add corresponding ones in the other BASE_* config templates. The Windows one is probably incomplete, but that doesn't matter for the moment, as mk1mf does it's own thing anyway. This required making the %withargs table global, so perl snippets in the configs can use it. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:37:33 +00:00
ex_libs => add("\$(LDLIBS)"),
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
bn_ops => "SIXTY_FOUR_BIT_LONG",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
dso_scheme => "$ENV{'LIBSSL_dlfcn'}",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
ranlib => "$ENV{'RANLIB'}",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
##### VMS
"vms-generic" => {
Configure - Rename BASE to DEFAULTS and add a few inheritable BASEs These BASE templates are intended to hold values that are common for all configuration variants for whole families of configurations. So far, three "families" are identified: Unix, Windows and VMS, mostly characterised by the build system they currently use. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 10:25:33 +00:00
inherit_from => [ "BASE_VMS" ],
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
template => 1,
cc => "CC/DECC",
VMS: tell the C compiler to use the ISO C94 standard The current version of the VMS compiler provides C99 features, strictly language wise. Unfortunately, even the most recent standard library isn't fully updated for that standard, so we need to use an earlier standard that the compiler supports. Most importantly, this affects the __STDC_VERSION__ value, which the compiler unfortunately currently defaults to 199901L. With this change we won't have to give VMS special treatment when looking for features based on that macro. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1785)
2016-10-26 16:04:40 +00:00
cflags => picker(default => "/STANDARD=(ISOC94,RELAXED)/NOLIST/PREFIX=ALL",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
debug => "/NOOPTIMIZE/DEBUG",
release => "/OPTIMIZE/NODEBUG"),
VMS: pretend to use -znodelete VMS only unloads shared libraries at process rundown, so tell the OpenSSL code so by pretending we linked with -znodelete. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1862)
2016-11-06 17:35:01 +00:00
defines => add("OPENSSL_USE_NODELETE"),
VMS: Change debug linking method to generate a separate Debug Symbol File That makes it possible to run images without automagically ending up in a debug session, while still being able to debug when required. All .DSF files must reside in the same directory to be useful. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2947)
2017-03-14 21:00:13 +00:00
lflags => picker(default => "/MAP='F\$PARSE(\".MAP\",\"\$\@\")'",
VMS: don't use /DSF, turn off CALL_DEBUG instead It turns out that /DSF didn't do any good for our purposes. Instead, remove the CALL_DEBUG flag from any image we link. This ensures that we can have debugging information in the image files, but don't automatically end up in a debugging session upon image activation. Unfortunately, this means the CALL_DEBUG must be turned on when there is a need to run with the debugger activated, and to turn it off when done. This has been documented in NOTES.VMS. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2957)
2017-03-15 01:52:20 +00:00
debug => "/DEBUG/TRACEBACK",
Configure - get rid of the special debug_ and release_ settings Instead, make the build type ("debug" or "release") available through $config{build_type} and let the configs themselves figure out what the usual settings (such as "cflags", "lflags" and so on) should be accordingly. The benefit with this is that we can now have debug and release variants of any setting, not just those Configure supports, and may also involve other factors (the MSVC flags /MD[d] and /MT[d] involve both build type and whether threading is enabled or not) Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-03-02 18:13:26 +00:00
release => "/NODEBUG/NOTRACEBACK"),
VMS: Use strict refdef extern model when building library object files Most of the time, this isn't strictly needed. However, in the default extern model (called relaxed refdef), symbols are treated as weak common objects unless they are initialised. The librarian doesn't include weak symbols in the (static) libraries, which renders them invisible when linking a program with said those libraries, which is a problem at times. Using the strict refdef model is much more like standard C on all other platforms, and thereby avoid the issues that come with the relaxed refdef model. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-21 21:36:49 +00:00
lib_cflags => add("/NAMES=(AS_IS,SHORTENED)/EXTERN_MODEL=STRICT_REFDEF"),
VMS: Use different C flags for programs that aren't to be installed This is generalised by having the following macros for stuff that won't be installed: NO_INST_LIB_CFLAGS, used instead of LIB_CFLAGS NO_INST_DSO_CFLAGS, used instead of DSO_CFLAGS NO_INST_BIN_CFLAGS, used instead of BIN_CFLAGS They take values from corresponding target config fields if those are defined, otherwise they take the respective values from LIB_CFLAGS, DSO_CFLAGS and BIN_CFLAGS. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-09-08 17:23:38 +00:00
# no_inst_bin_cflags is used instead of bin_cflags by descrip.mms.tmpl
# for object files belonging to selected internal programs
no_inst_bin_cflags => "/NAMES=(AS_IS,SHORTENED)",
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
shared_target => "vms-shared",
Small fixups in DSO - VMS configs had no dso_scheme - Incorrect return of NULL method. Reviewed-by: Tim Hudson <tjh@openssl.org>
2016-03-23 07:40:56 +00:00
dso_scheme => "vms",
Configure - Get rid of the special thread_cflag, replace with thread_scheme The thread_cflag setting filled a double role, as kinda sorta an indicator of thread scheme, and as cflags. Some configs also added lflags and ex_libs for multithreading regardless of if threading would be enabled or not. Instead of this, add threading cflags among in the cflag setting, threading lflags in the lflag setting and so on if and only if threads are enabled (which they are by default). Also, for configs where there are no special cflags for threading (the VMS configs are of that kind), this makes it possible to still clearly mention what thread scheme is used. The exact value of thread scheme is currently ignored except when it's "(unknown)", and thereby only serves as a flag to tell if we know how to build for multi-threading in a particular config. Yet, the currently used values are "(unknown)", "pthreads", "uithreads" (a.k.a solaris threads) and "winthreads". Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-02-27 15:51:34 +00:00
thread_scheme => "pthreads",
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
Finally, make sure vms_term_sock.c is built on VMS Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-09-14 21:40:27 +00:00
apps_aux_src => "vms_decc_init.c vms_term_sock.c",
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
"vms-alpha" => {
inherit_from => [ "vms-generic" ],
Config: The cflags in vms-alpha and vms-ia64 have to be added "vms-generic" already has some values, which were discarded. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 20:06:07 +00:00
cflags => add(sub { my @warnings =
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
@{vms_info(0)->{disable_warns}};
Config: The cflags in vms-alpha and vms-ia64 have to be added "vms-generic" already has some values, which were discarded. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 20:06:07 +00:00
@warnings
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : (); }),
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
defines =>
add(sub {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
return vms_info(0)->{def_zlib}
? "LIBZ=\"\"\"".vms_info(0)->{def_zlib}."\"\"\"" : ();
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}),
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
ex_libs => add(sub { return vms_info(0)->{zlib} || (); }),
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
pointer_size => sub { return vms_info(0)->{pointer_size} },
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
#as => "???",
#debug_aflags => "/NOOPTIMIZE/DEBUG",
#release_aflags => "/OPTIMIZE/NODEBUG",
Remove some unused options from 10-main.conf The options RC4_CHUNK_LL, DES_PTR, and BF_PTR were removed by Rich in commit 3e9e810f2e047effb1056211794d2d12ec2b04e7 but were still sticking around in a coupule configuration entries. Since they're unused, remove them. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1390)
2016-08-03 20:07:55 +00:00
bn_opts => "SIXTY_FOUR_BIT RC4_INT",
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
Downcase VMS config names On VMS, we downcase option names, which means that config names are downcased as well, so they need to be downcased in the target table to be found. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-21 19:20:15 +00:00
"vms-alpha-p32" => {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
inherit_from => [ "vms-generic" ],
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
cflags =>
add("/POINTER_SIZE=32",
sub { my @warnings =
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
@{vms_info(32)->{disable_warns}};
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
@warnings
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : ();
} ),
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
defines =>
add(sub {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
return vms_info(32)->{def_zlib}
? "LIBZ=\"\"\"".vms_info(32)->{def_zlib}."\"\"\"" : ();
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}),
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
ex_libs => add(sub { return vms_info(32)->{zlib} || (); }),
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
pointer_size => sub { return vms_info(32)->{pointer_size} },
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
Downcase VMS config names On VMS, we downcase option names, which means that config names are downcased as well, so they need to be downcased in the target table to be found. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-21 19:20:15 +00:00
"vms-alpha-p64" => {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
inherit_from => [ "vms-generic" ],
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
cflags =>
Force argv to be an array of long pointers on VMS Reverts commit 087ca80ad83071dde0bb6bc1c28c743caa00eaf8 Instead of battling the odd format of argv given to main() in default P64 mode, tell the compiler to make it an array of 64-bit pointers when compiling in P64 mode. A note is added in NOTES.VMS regarding minimum DEC C version. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-01 10:36:51 +00:00
add("/POINTER_SIZE=64=ARGV",
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
sub { my @warnings =
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
@{vms_info(64)->{disable_warns}};
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
@warnings
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : ();
} ),
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
defines =>
add(sub {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
return vms_info(64)->{def_zlib}
? "LIBZ=\"\"\"".vms_info(64)->{def_zlib}."\"\"\"" : ();
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}),
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
ex_libs => add(sub { return vms_info(64)->{zlib} || (); }),
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
pointer_size => sub { return vms_info(64)->{pointer_size} },
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
"vms-ia64" => {
inherit_from => [ "vms-generic" ],
Config: The cflags in vms-alpha and vms-ia64 have to be added "vms-generic" already has some values, which were discarded. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 20:06:07 +00:00
cflags => add(sub { my @warnings =
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
@{vms_info(0)->{disable_warns}};
Config: The cflags in vms-alpha and vms-ia64 have to be added "vms-generic" already has some values, which were discarded. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 20:06:07 +00:00
@warnings
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : (); }),
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
defines =>
add(sub {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
return vms_info(0)->{def_zlib}
? "LIBZ=\"\"\"".vms_info(0)->{def_zlib}."\"\"\"" : ();
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}),
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
ex_libs => add(sub { return vms_info(0)->{zlib} || (); }),
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
pointer_size => sub { return vms_info(0)->{pointer_size} },
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
#as => "I4S",
#debug_aflags => "/NOOPTIMIZE/DEBUG",
#release_aflags => "/OPTIMIZE/NODEBUG",
Remove some unused options from 10-main.conf The options RC4_CHUNK_LL, DES_PTR, and BF_PTR were removed by Rich in commit 3e9e810f2e047effb1056211794d2d12ec2b04e7 but were still sticking around in a coupule configuration entries. Since they're unused, remove them. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1390)
2016-08-03 20:07:55 +00:00
bn_opts => "SIXTY_FOUR_BIT RC4_INT",
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
Downcase VMS config names On VMS, we downcase option names, which means that config names are downcased as well, so they need to be downcased in the target table to be found. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-21 19:20:15 +00:00
"vms-ia64-p32" => {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
inherit_from => [ "vms-generic" ],
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
cflags =>
add("/POINTER_SIZE=32",
sub { my @warnings =
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
@{vms_info(32)->{disable_warns}};
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
@warnings
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : ();
} ),
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
defines =>
add(sub {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
return vms_info(32)->{def_zlib}
? "LIBZ=\"\"\"".vms_info(32)->{def_zlib}."\"\"\"" : ();
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}),
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
ex_libs => add(sub { return vms_info(32)->{zlib} || (); }),
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
pointer_size => sub { return vms_info(32)->{pointer_size} },
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
Downcase VMS config names On VMS, we downcase option names, which means that config names are downcased as well, so they need to be downcased in the target table to be found. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-21 19:20:15 +00:00
"vms-ia64-p64" => {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
inherit_from => [ "vms-generic" ],
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
cflags =>
Force argv to be an array of long pointers on VMS Reverts commit 087ca80ad83071dde0bb6bc1c28c743caa00eaf8 Instead of battling the odd format of argv given to main() in default P64 mode, tell the compiler to make it an array of 64-bit pointers when compiling in P64 mode. A note is added in NOTES.VMS regarding minimum DEC C version. Reviewed-by: Andy Polyakov <appro@openssl.org>
2016-04-01 10:36:51 +00:00
add("/POINTER_SIZE=64=ARGV",
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
sub { my @warnings =
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
@{vms_info(64)->{disable_warns}};
VMS: Disable the warning MAYLOSEDATA3 The warning MAYLOSEDATA3 is one you will always get when compiling source that calculates the difference between two pointers with /POINTER_SIZE=64. The reason is quite simple, ptrdiff_t is always a 32-bit integer regardless of pointer size, so the result of 'ptr1 - ptr2' can potentially be larger than a 32-bit integer. The compiler simply warns you of that possibility. However, we only use pointer difference within objects and strings, all of them well within 2^32 bytes in size, so that operation is harmless with our source, and we can therefore safely turn off that warning. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-03-29 18:18:31 +00:00
@warnings
? "/WARNINGS=DISABLE=(".join(",",@warnings).")" : ();
} ),
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
defines =>
add(sub {
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
return vms_info(64)->{def_zlib}
? "LIBZ=\"\"\"".vms_info(64)->{def_zlib}."\"\"\"" : ();
Fix zlib configuration options. The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 13:28:06 +00:00
}),
Configuration: Simplify the way vms information is retrieved Reviewed-by: Matt Caswell <matt@openssl.org>
2016-04-12 14:03:02 +00:00
ex_libs => add(sub { return vms_info(64)->{zlib} || (); }),
Add the missing pointer_size information on VMS configs Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-02 07:50:24 +00:00
pointer_size => sub { return vms_info(64)->{pointer_size} },
unified build scheme: add a "unified" template for VMS descrip.mms As part of this, change util/mkdef.pl to stop adding libraries to depend on in its output. mkdef.pl should ONLY output a symbol vector. Because symbol names can't be longer than 31 characters, we use the compiler to shorten those that are longer down to 23 characters plus an 8 character CRC. To make sure users of our header files will pick up on that automatically, add the DEC C supported extra headers files __decc_include_prologue.h and __decc_include_epilogue.h. Furthermore, we add a config.com, so VMS people can configure just as comfortably as any Unix folks, thusly: @config Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-01-30 06:14:58 +00:00
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
);
Reference in a new issue Copy permalink