wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/test/ssl-tests/08-npn.conf

817 lines
24 KiB
Text
Raw Normal View History

SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# Generated with generate_ssl_tests.pl
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
num_tests = 20
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
test-0 = 0-npn-simple
test-1 = 1-npn-client-finds-match
test-2 = 2-npn-client-honours-server-pref
test-3 = 3-npn-client-first-pref-on-mismatch
test-4 = 4-npn-no-server-support
test-5 = 5-npn-no-client-support
test-6 = 6-npn-with-sni-no-context-switch
test-7 = 7-npn-with-sni-context-switch
test-8 = 8-npn-selected-sni-server-supports-npn
test-9 = 9-npn-selected-sni-server-does-not-support-npn
test-10 = 10-alpn-preferred-over-npn
test-11 = 11-sni-npn-preferred-over-alpn
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
test-12 = 12-npn-simple-resumption
test-13 = 13-npn-server-switch-resumption
test-14 = 14-npn-client-switch-resumption
test-15 = 15-npn-client-first-pref-on-mismatch-resumption
test-16 = 16-npn-no-server-support-resumption
test-17 = 17-npn-no-client-support-resumption
test-18 = 18-alpn-preferred-over-npn-resumption
test-19 = 19-npn-used-if-alpn-not-supported-resumption
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[0-npn-simple]
ssl_conf = 0-npn-simple-ssl
[0-npn-simple-ssl]
server = 0-npn-simple-server
client = 0-npn-simple-client
[0-npn-simple-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[0-npn-simple-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-0]
ExpectedNPNProtocol = foo
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 0-npn-simple-server-extra
client = 0-npn-simple-client-extra
[0-npn-simple-server-extra]
NPNProtocols = foo
[0-npn-simple-client-extra]
NPNProtocols = foo
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[1-npn-client-finds-match]
ssl_conf = 1-npn-client-finds-match-ssl
[1-npn-client-finds-match-ssl]
server = 1-npn-client-finds-match-server
client = 1-npn-client-finds-match-client
[1-npn-client-finds-match-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[1-npn-client-finds-match-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-1]
ExpectedNPNProtocol = bar
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 1-npn-client-finds-match-server-extra
client = 1-npn-client-finds-match-client-extra
[1-npn-client-finds-match-server-extra]
NPNProtocols = baz,bar
[1-npn-client-finds-match-client-extra]
NPNProtocols = foo,bar
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[2-npn-client-honours-server-pref]
ssl_conf = 2-npn-client-honours-server-pref-ssl
[2-npn-client-honours-server-pref-ssl]
server = 2-npn-client-honours-server-pref-server
client = 2-npn-client-honours-server-pref-client
[2-npn-client-honours-server-pref-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[2-npn-client-honours-server-pref-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-2]
ExpectedNPNProtocol = bar
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 2-npn-client-honours-server-pref-server-extra
client = 2-npn-client-honours-server-pref-client-extra
[2-npn-client-honours-server-pref-server-extra]
NPNProtocols = bar,foo
[2-npn-client-honours-server-pref-client-extra]
NPNProtocols = foo,bar
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[3-npn-client-first-pref-on-mismatch]
ssl_conf = 3-npn-client-first-pref-on-mismatch-ssl
[3-npn-client-first-pref-on-mismatch-ssl]
server = 3-npn-client-first-pref-on-mismatch-server
client = 3-npn-client-first-pref-on-mismatch-client
[3-npn-client-first-pref-on-mismatch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[3-npn-client-first-pref-on-mismatch-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-3]
ExpectedNPNProtocol = foo
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 3-npn-client-first-pref-on-mismatch-server-extra
client = 3-npn-client-first-pref-on-mismatch-client-extra
[3-npn-client-first-pref-on-mismatch-server-extra]
NPNProtocols = baz
[3-npn-client-first-pref-on-mismatch-client-extra]
NPNProtocols = foo,bar
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[4-npn-no-server-support]
ssl_conf = 4-npn-no-server-support-ssl
[4-npn-no-server-support-ssl]
server = 4-npn-no-server-support-server
client = 4-npn-no-server-support-client
[4-npn-no-server-support-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[4-npn-no-server-support-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-4]
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
client = 4-npn-no-server-support-client-extra
[4-npn-no-server-support-client-extra]
NPNProtocols = foo
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[5-npn-no-client-support]
ssl_conf = 5-npn-no-client-support-ssl
[5-npn-no-client-support-ssl]
server = 5-npn-no-client-support-server
client = 5-npn-no-client-support-client
[5-npn-no-client-support-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[5-npn-no-client-support-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-5]
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 5-npn-no-client-support-server-extra
[5-npn-no-client-support-server-extra]
NPNProtocols = foo
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[6-npn-with-sni-no-context-switch]
ssl_conf = 6-npn-with-sni-no-context-switch-ssl
[6-npn-with-sni-no-context-switch-ssl]
server = 6-npn-with-sni-no-context-switch-server
client = 6-npn-with-sni-no-context-switch-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 6-npn-with-sni-no-context-switch-server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
[6-npn-with-sni-no-context-switch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[6-npn-with-sni-no-context-switch-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[6-npn-with-sni-no-context-switch-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-6]
ExpectedNPNProtocol = foo
ExpectedServerName = server1
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 6-npn-with-sni-no-context-switch-server-extra
server2 = 6-npn-with-sni-no-context-switch-server2-extra
client = 6-npn-with-sni-no-context-switch-client-extra
[6-npn-with-sni-no-context-switch-server-extra]
NPNProtocols = foo
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[6-npn-with-sni-no-context-switch-server2-extra]
NPNProtocols = bar
[6-npn-with-sni-no-context-switch-client-extra]
NPNProtocols = foo,bar
ServerName = server1
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[7-npn-with-sni-context-switch]
ssl_conf = 7-npn-with-sni-context-switch-ssl
[7-npn-with-sni-context-switch-ssl]
server = 7-npn-with-sni-context-switch-server
client = 7-npn-with-sni-context-switch-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 7-npn-with-sni-context-switch-server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
[7-npn-with-sni-context-switch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[7-npn-with-sni-context-switch-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[7-npn-with-sni-context-switch-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-7]
ExpectedNPNProtocol = bar
ExpectedServerName = server2
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 7-npn-with-sni-context-switch-server-extra
server2 = 7-npn-with-sni-context-switch-server2-extra
client = 7-npn-with-sni-context-switch-client-extra
[7-npn-with-sni-context-switch-server-extra]
NPNProtocols = foo
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[7-npn-with-sni-context-switch-server2-extra]
NPNProtocols = bar
[7-npn-with-sni-context-switch-client-extra]
NPNProtocols = foo,bar
ServerName = server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[8-npn-selected-sni-server-supports-npn]
ssl_conf = 8-npn-selected-sni-server-supports-npn-ssl
[8-npn-selected-sni-server-supports-npn-ssl]
server = 8-npn-selected-sni-server-supports-npn-server
client = 8-npn-selected-sni-server-supports-npn-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 8-npn-selected-sni-server-supports-npn-server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
[8-npn-selected-sni-server-supports-npn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[8-npn-selected-sni-server-supports-npn-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[8-npn-selected-sni-server-supports-npn-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-8]
ExpectedNPNProtocol = bar
ExpectedServerName = server2
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 8-npn-selected-sni-server-supports-npn-server-extra
server2 = 8-npn-selected-sni-server-supports-npn-server2-extra
client = 8-npn-selected-sni-server-supports-npn-client-extra
[8-npn-selected-sni-server-supports-npn-server-extra]
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[8-npn-selected-sni-server-supports-npn-server2-extra]
NPNProtocols = bar
[8-npn-selected-sni-server-supports-npn-client-extra]
NPNProtocols = foo,bar
ServerName = server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[9-npn-selected-sni-server-does-not-support-npn]
ssl_conf = 9-npn-selected-sni-server-does-not-support-npn-ssl
[9-npn-selected-sni-server-does-not-support-npn-ssl]
server = 9-npn-selected-sni-server-does-not-support-npn-server
client = 9-npn-selected-sni-server-does-not-support-npn-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 9-npn-selected-sni-server-does-not-support-npn-server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
[9-npn-selected-sni-server-does-not-support-npn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[9-npn-selected-sni-server-does-not-support-npn-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[9-npn-selected-sni-server-does-not-support-npn-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-9]
ExpectedServerName = server2
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 9-npn-selected-sni-server-does-not-support-npn-server-extra
client = 9-npn-selected-sni-server-does-not-support-npn-client-extra
[9-npn-selected-sni-server-does-not-support-npn-server-extra]
NPNProtocols = bar
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[9-npn-selected-sni-server-does-not-support-npn-client-extra]
NPNProtocols = foo,bar
ServerName = server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[10-alpn-preferred-over-npn]
ssl_conf = 10-alpn-preferred-over-npn-ssl
[10-alpn-preferred-over-npn-ssl]
server = 10-alpn-preferred-over-npn-server
client = 10-alpn-preferred-over-npn-client
[10-alpn-preferred-over-npn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[10-alpn-preferred-over-npn-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-10]
ExpectedALPNProtocol = foo
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 10-alpn-preferred-over-npn-server-extra
client = 10-alpn-preferred-over-npn-client-extra
[10-alpn-preferred-over-npn-server-extra]
ALPNProtocols = foo
NPNProtocols = bar
[10-alpn-preferred-over-npn-client-extra]
ALPNProtocols = foo
NPNProtocols = bar
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
# ===========================================================
[11-sni-npn-preferred-over-alpn]
ssl_conf = 11-sni-npn-preferred-over-alpn-ssl
[11-sni-npn-preferred-over-alpn-ssl]
server = 11-sni-npn-preferred-over-alpn-server
client = 11-sni-npn-preferred-over-alpn-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 11-sni-npn-preferred-over-alpn-server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
[11-sni-npn-preferred-over-alpn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[11-sni-npn-preferred-over-alpn-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[11-sni-npn-preferred-over-alpn-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-11]
ExpectedNPNProtocol = bar
ExpectedServerName = server2
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 11-sni-npn-preferred-over-alpn-server-extra
server2 = 11-sni-npn-preferred-over-alpn-server2-extra
client = 11-sni-npn-preferred-over-alpn-client-extra
[11-sni-npn-preferred-over-alpn-server-extra]
ALPNProtocols = foo
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[11-sni-npn-preferred-over-alpn-server2-extra]
NPNProtocols = bar
[11-sni-npn-preferred-over-alpn-client-extra]
ALPNProtocols = foo
NPNProtocols = bar
ServerName = server2
SSL test framework: port NPN and ALPN tests Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-04 18:16:14 +00:00
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
# ===========================================================
[12-npn-simple-resumption]
ssl_conf = 12-npn-simple-resumption-ssl
[12-npn-simple-resumption-ssl]
server = 12-npn-simple-resumption-server
client = 12-npn-simple-resumption-client
resume-server = 12-npn-simple-resumption-server
resume-client = 12-npn-simple-resumption-client
[12-npn-simple-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[12-npn-simple-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-12]
ExpectedNPNProtocol = foo
HandshakeMode = Resume
ResumptionExpected = Yes
server = 12-npn-simple-resumption-server-extra
resume-server = 12-npn-simple-resumption-server-extra
client = 12-npn-simple-resumption-client-extra
resume-client = 12-npn-simple-resumption-client-extra
[12-npn-simple-resumption-server-extra]
NPNProtocols = foo
[12-npn-simple-resumption-client-extra]
NPNProtocols = foo
# ===========================================================
[13-npn-server-switch-resumption]
ssl_conf = 13-npn-server-switch-resumption-ssl
[13-npn-server-switch-resumption-ssl]
server = 13-npn-server-switch-resumption-server
client = 13-npn-server-switch-resumption-client
resume-server = 13-npn-server-switch-resumption-resume-server
resume-client = 13-npn-server-switch-resumption-client
[13-npn-server-switch-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[13-npn-server-switch-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[13-npn-server-switch-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-13]
ExpectedNPNProtocol = baz
HandshakeMode = Resume
ResumptionExpected = Yes
server = 13-npn-server-switch-resumption-server-extra
resume-server = 13-npn-server-switch-resumption-resume-server-extra
client = 13-npn-server-switch-resumption-client-extra
resume-client = 13-npn-server-switch-resumption-client-extra
[13-npn-server-switch-resumption-server-extra]
NPNProtocols = bar,foo
[13-npn-server-switch-resumption-resume-server-extra]
NPNProtocols = baz,foo
[13-npn-server-switch-resumption-client-extra]
NPNProtocols = foo,bar,baz
# ===========================================================
[14-npn-client-switch-resumption]
ssl_conf = 14-npn-client-switch-resumption-ssl
[14-npn-client-switch-resumption-ssl]
server = 14-npn-client-switch-resumption-server
client = 14-npn-client-switch-resumption-client
resume-server = 14-npn-client-switch-resumption-server
resume-client = 14-npn-client-switch-resumption-resume-client
[14-npn-client-switch-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[14-npn-client-switch-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[14-npn-client-switch-resumption-resume-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-14]
ExpectedNPNProtocol = bar
HandshakeMode = Resume
ResumptionExpected = Yes
server = 14-npn-client-switch-resumption-server-extra
resume-server = 14-npn-client-switch-resumption-server-extra
client = 14-npn-client-switch-resumption-client-extra
resume-client = 14-npn-client-switch-resumption-resume-client-extra
[14-npn-client-switch-resumption-server-extra]
NPNProtocols = foo,bar,baz
[14-npn-client-switch-resumption-client-extra]
NPNProtocols = foo,baz
[14-npn-client-switch-resumption-resume-client-extra]
NPNProtocols = bar,baz
# ===========================================================
[15-npn-client-first-pref-on-mismatch-resumption]
ssl_conf = 15-npn-client-first-pref-on-mismatch-resumption-ssl
[15-npn-client-first-pref-on-mismatch-resumption-ssl]
server = 15-npn-client-first-pref-on-mismatch-resumption-server
client = 15-npn-client-first-pref-on-mismatch-resumption-client
resume-server = 15-npn-client-first-pref-on-mismatch-resumption-resume-server
resume-client = 15-npn-client-first-pref-on-mismatch-resumption-client
[15-npn-client-first-pref-on-mismatch-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[15-npn-client-first-pref-on-mismatch-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[15-npn-client-first-pref-on-mismatch-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-15]
ExpectedNPNProtocol = foo
HandshakeMode = Resume
ResumptionExpected = Yes
server = 15-npn-client-first-pref-on-mismatch-resumption-server-extra
resume-server = 15-npn-client-first-pref-on-mismatch-resumption-resume-server-extra
client = 15-npn-client-first-pref-on-mismatch-resumption-client-extra
resume-client = 15-npn-client-first-pref-on-mismatch-resumption-client-extra
[15-npn-client-first-pref-on-mismatch-resumption-server-extra]
NPNProtocols = bar
[15-npn-client-first-pref-on-mismatch-resumption-resume-server-extra]
NPNProtocols = baz
[15-npn-client-first-pref-on-mismatch-resumption-client-extra]
NPNProtocols = foo,bar
# ===========================================================
[16-npn-no-server-support-resumption]
ssl_conf = 16-npn-no-server-support-resumption-ssl
[16-npn-no-server-support-resumption-ssl]
server = 16-npn-no-server-support-resumption-server
client = 16-npn-no-server-support-resumption-client
resume-server = 16-npn-no-server-support-resumption-resume-server
resume-client = 16-npn-no-server-support-resumption-client
[16-npn-no-server-support-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[16-npn-no-server-support-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[16-npn-no-server-support-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-16]
HandshakeMode = Resume
ResumptionExpected = Yes
server = 16-npn-no-server-support-resumption-server-extra
client = 16-npn-no-server-support-resumption-client-extra
resume-client = 16-npn-no-server-support-resumption-client-extra
[16-npn-no-server-support-resumption-server-extra]
NPNProtocols = foo
[16-npn-no-server-support-resumption-client-extra]
NPNProtocols = foo
# ===========================================================
[17-npn-no-client-support-resumption]
ssl_conf = 17-npn-no-client-support-resumption-ssl
[17-npn-no-client-support-resumption-ssl]
server = 17-npn-no-client-support-resumption-server
client = 17-npn-no-client-support-resumption-client
resume-server = 17-npn-no-client-support-resumption-server
resume-client = 17-npn-no-client-support-resumption-resume-client
[17-npn-no-client-support-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[17-npn-no-client-support-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[17-npn-no-client-support-resumption-resume-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-17]
HandshakeMode = Resume
ResumptionExpected = Yes
server = 17-npn-no-client-support-resumption-server-extra
resume-server = 17-npn-no-client-support-resumption-server-extra
client = 17-npn-no-client-support-resumption-client-extra
[17-npn-no-client-support-resumption-server-extra]
NPNProtocols = foo
[17-npn-no-client-support-resumption-client-extra]
NPNProtocols = foo
# ===========================================================
[18-alpn-preferred-over-npn-resumption]
ssl_conf = 18-alpn-preferred-over-npn-resumption-ssl
[18-alpn-preferred-over-npn-resumption-ssl]
server = 18-alpn-preferred-over-npn-resumption-server
client = 18-alpn-preferred-over-npn-resumption-client
resume-server = 18-alpn-preferred-over-npn-resumption-resume-server
resume-client = 18-alpn-preferred-over-npn-resumption-client
[18-alpn-preferred-over-npn-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[18-alpn-preferred-over-npn-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[18-alpn-preferred-over-npn-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-18]
ExpectedALPNProtocol = foo
HandshakeMode = Resume
ResumptionExpected = Yes
server = 18-alpn-preferred-over-npn-resumption-server-extra
resume-server = 18-alpn-preferred-over-npn-resumption-resume-server-extra
client = 18-alpn-preferred-over-npn-resumption-client-extra
resume-client = 18-alpn-preferred-over-npn-resumption-client-extra
[18-alpn-preferred-over-npn-resumption-server-extra]
NPNProtocols = bar
[18-alpn-preferred-over-npn-resumption-resume-server-extra]
ALPNProtocols = foo
NPNProtocols = baz
[18-alpn-preferred-over-npn-resumption-client-extra]
ALPNProtocols = foo
NPNProtocols = bar,baz
# ===========================================================
[19-npn-used-if-alpn-not-supported-resumption]
ssl_conf = 19-npn-used-if-alpn-not-supported-resumption-ssl
[19-npn-used-if-alpn-not-supported-resumption-ssl]
server = 19-npn-used-if-alpn-not-supported-resumption-server
client = 19-npn-used-if-alpn-not-supported-resumption-client
resume-server = 19-npn-used-if-alpn-not-supported-resumption-resume-server
resume-client = 19-npn-used-if-alpn-not-supported-resumption-client
[19-npn-used-if-alpn-not-supported-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[19-npn-used-if-alpn-not-supported-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[19-npn-used-if-alpn-not-supported-resumption-client]
CipherString = DEFAULT
Start using the key_share data to derive the PMS The previous commits put in place the logic to exchange key_share data. We now need to do something with that information. In <= TLSv1.2 the equivalent of the key_share extension is the ServerKeyExchange and ClientKeyExchange messages. With key_share those two messages are no longer necessary. The commit removes the SKE and CKE messages from the TLSv1.3 state machine. TLSv1.3 is completely different to TLSv1.2 in the messages that it sends and the transitions that are allowed. Therefore, rather than extend the existing <=TLS1.2 state transition functions, we create a whole new set for TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time they will be amended. The new TLSv1.3 transitions remove SKE and CKE completely. There's also some cleanup for some stuff which is not relevant to TLSv1.3 and is easy to remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN. I also disable EXTMS for TLSv1.3. Using it was causing some added complexity, so rather than fix it I removed it, since eventually it will not be needed anyway. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-11-02 15:03:56 +00:00
MaxProtocol = TLSv1.2
NPN and ALPN: test resumption In NPN and ALPN, the protocol is renegotiated upon resumption. Test that resumption picks up changes to the extension. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-08-08 12:42:08 +00:00
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-19]
ExpectedNPNProtocol = baz
HandshakeMode = Resume
ResumptionExpected = Yes
server = 19-npn-used-if-alpn-not-supported-resumption-server-extra
resume-server = 19-npn-used-if-alpn-not-supported-resumption-resume-server-extra
client = 19-npn-used-if-alpn-not-supported-resumption-client-extra
resume-client = 19-npn-used-if-alpn-not-supported-resumption-client-extra
[19-npn-used-if-alpn-not-supported-resumption-server-extra]
ALPNProtocols = foo
NPNProtocols = bar
[19-npn-used-if-alpn-not-supported-resumption-resume-server-extra]
NPNProtocols = baz
[19-npn-used-if-alpn-not-supported-resumption-client-extra]
ALPNProtocols = foo
NPNProtocols = bar,baz
Reference in a new issue Copy permalink