openssl/crypto/dso/dso_dlfcn.c

290 lines
7.9 KiB
C
Raw Normal View History

/* dso_dlfcn.c */
/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
* project 2000.
*/
/* ====================================================================
* Copyright (c) 2000 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* licensing@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#include <stdio.h>
#include "cryptlib.h"
#include <openssl/dso.h>
#ifndef DSO_DLFCN
DSO_METHOD *DSO_METHOD_dlfcn(void)
{
return NULL;
}
#else
#ifdef HAVE_DLFCN_H
#include <dlfcn.h>
#endif
/* Part of the hack in "dlfcn_load" ... */
#define DSO_MAX_TRANSLATED_SIZE 256
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
static int dlfcn_load(DSO *dso);
static int dlfcn_unload(DSO *dso);
static void *dlfcn_bind_var(DSO *dso, const char *symname);
static DSO_FUNC_TYPE dlfcn_bind_func(DSO *dso, const char *symname);
#if 0
static int dlfcn_unbind(DSO *dso, char *symname, void *symptr);
static int dlfcn_init(DSO *dso);
static int dlfcn_finish(DSO *dso);
static long dlfcn_ctrl(DSO *dso, int cmd, long larg, void *parg);
#endif
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
static char *dlfcn_name_converter(DSO *dso, const char *filename);
static DSO_METHOD dso_meth_dlfcn = {
"OpenSSL 'dlfcn' shared library method",
dlfcn_load,
dlfcn_unload,
dlfcn_bind_var,
dlfcn_bind_func,
/* For now, "unbind" doesn't exist */
#if 0
NULL, /* unbind_var */
NULL, /* unbind_func */
#endif
NULL, /* ctrl */
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
dlfcn_name_converter,
NULL, /* init */
NULL /* finish */
};
DSO_METHOD *DSO_METHOD_dlfcn(void)
{
return(&dso_meth_dlfcn);
}
/* Prior to using the dlopen() function, we should decide on the flag
* we send. There's a few different ways of doing this and it's a
* messy venn-diagram to match up which platforms support what. So
* as we don't have autoconf yet, I'm implementing a hack that could
* be hacked further relatively easily to deal with cases as we find
* them. Initially this is to cope with OpenBSD. */
#ifdef __OpenBSD__
# ifdef DL_LAZY
# define DLOPEN_FLAG DL_LAZY
# else
# ifdef RTLD_NOW
# define DLOPEN_FLAG RTLD_NOW
# else
# define DLOPEN_FLAG 0
# endif
# endif
#else
# define DLOPEN_FLAG RTLD_NOW /* Hope this works everywhere else */
#endif
/* For this DSO_METHOD, our meth_data STACK will contain;
* (i) the handle (void*) returned from dlopen().
*/
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
static int dlfcn_load(DSO *dso)
{
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
void *ptr = NULL;
/* See applicable comments in dso_dl.c */
char *filename = DSO_convert_filename(dso, NULL);
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
if(filename == NULL)
{
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
DSOerr(DSO_F_DLFCN_LOAD,DSO_R_NO_FILENAME);
goto err;
}
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
ptr = dlopen(filename, DLOPEN_FLAG);
if(ptr == NULL)
{
DSOerr(DSO_F_DLFCN_LOAD,DSO_R_LOAD_FAILED);
ERR_add_error_data(3, "filename(", filename, ")");
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
goto err;
}
if(!sk_push(dso->meth_data, (char *)ptr))
{
DSOerr(DSO_F_DLFCN_LOAD,DSO_R_STACK_ERROR);
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
goto err;
}
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
/* Success */
dso->loaded_filename = filename;
return(1);
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
err:
/* Cleanup! */
if(filename != NULL)
OPENSSL_free(filename);
if(ptr != NULL)
dlclose(ptr);
return(0);
}
static int dlfcn_unload(DSO *dso)
{
void *ptr;
if(dso == NULL)
{
DSOerr(DSO_F_DLFCN_UNLOAD,ERR_R_PASSED_NULL_PARAMETER);
return(0);
}
if(sk_num(dso->meth_data) < 1)
return(1);
ptr = (void *)sk_pop(dso->meth_data);
if(ptr == NULL)
{
DSOerr(DSO_F_DLFCN_UNLOAD,DSO_R_NULL_HANDLE);
/* Should push the value back onto the stack in
* case of a retry. */
sk_push(dso->meth_data, (char *)ptr);
return(0);
}
/* For now I'm not aware of any errors associated with dlclose() */
dlclose(ptr);
return(1);
}
static void *dlfcn_bind_var(DSO *dso, const char *symname)
{
void *ptr, *sym;
if((dso == NULL) || (symname == NULL))
{
DSOerr(DSO_F_DLFCN_BIND_VAR,ERR_R_PASSED_NULL_PARAMETER);
return(NULL);
}
if(sk_num(dso->meth_data) < 1)
{
DSOerr(DSO_F_DLFCN_BIND_VAR,DSO_R_STACK_ERROR);
return(NULL);
}
ptr = (void *)sk_value(dso->meth_data, sk_num(dso->meth_data) - 1);
if(ptr == NULL)
{
DSOerr(DSO_F_DLFCN_BIND_VAR,DSO_R_NULL_HANDLE);
return(NULL);
}
sym = dlsym(ptr, symname);
if(sym == NULL)
{
DSOerr(DSO_F_DLFCN_BIND_VAR,DSO_R_SYM_FAILURE);
ERR_add_error_data(3, "symname(", symname, ")");
return(NULL);
}
return(sym);
}
static DSO_FUNC_TYPE dlfcn_bind_func(DSO *dso, const char *symname)
{
void *ptr;
DSO_FUNC_TYPE sym;
if((dso == NULL) || (symname == NULL))
{
DSOerr(DSO_F_DLFCN_BIND_FUNC,ERR_R_PASSED_NULL_PARAMETER);
return(NULL);
}
if(sk_num(dso->meth_data) < 1)
{
DSOerr(DSO_F_DLFCN_BIND_FUNC,DSO_R_STACK_ERROR);
return(NULL);
}
ptr = (void *)sk_value(dso->meth_data, sk_num(dso->meth_data) - 1);
if(ptr == NULL)
{
DSOerr(DSO_F_DLFCN_BIND_FUNC,DSO_R_NULL_HANDLE);
return(NULL);
}
sym = (DSO_FUNC_TYPE)dlsym(ptr, symname);
if(sym == NULL)
{
DSOerr(DSO_F_DLFCN_BIND_FUNC,DSO_R_SYM_FAILURE);
ERR_add_error_data(3, "symname(", symname, ")");
return(NULL);
}
return(sym);
}
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
static char *dlfcn_name_converter(DSO *dso, const char *filename)
{
char *translated;
int len, rsize, transform;
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
len = strlen(filename);
rsize = len + 1;
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
transform = (strstr(filename, "/") == NULL);
if(transform)
{
/* We will convert this to "%s.so" or "lib%s.so" */
rsize += 3; /* The length of ".so" */
if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
rsize += 3; /* The length of "lib" */
}
translated = OPENSSL_malloc(rsize);
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
if(translated == NULL)
{
DSOerr(DSO_F_DLFCN_NAME_CONVERTER,
DSO_R_NAME_TRANSLATION_FAILED);
return(NULL);
}
if(transform)
{
if ((DSO_flags(dso) & DSO_FLAG_NAME_TRANSLATION_EXT_ONLY) == 0)
sprintf(translated, "lib%s.so", filename);
else
sprintf(translated, "%s.so", filename);
}
This changes the behaviour of the DSO mechanism for determining an appropriate filename translation on the host system. Apart from this point, users should also note that there's a slight change in the API functions too. The DSO now contains its own to-be-converted filename ("dso->filename"), and at the time the DSO loads the "dso->loaded_filename" value is set to the translated form. As such, this also provides an impicit way of determining if the DSO is currently loaded or not. Except, perhaps, VMS .... :-) The various DSO_METHODs have been updated for this mechanism except VMS which is deliberately broken for now, Richard is going to look at how to fit it in (the source comments in there explain "the issue"). Basically, the new callback scheme allows the filename conversion to (a) be turned off altogether through the use of the DSO_FLAG_NO_NAME_TRANSLATION flag, (b) be handled in the default way using the default DSO_METHOD's converter (c) overriden per-DSO by setting the override callback (d) a mix of (b) and (c) - eg. implement an override callback that; (i) checks if we're win32 "if(strstr(dso->meth->name, "win32"))..." and if so, convert "blah" into "blah32.dll" (the default is otherwise to make it "blah.dll"). (ii) default to the normal behaviour - eg. we're not on win32, so finish with (return dso->meth->dso_name_converter(dso,NULL)). (e) be retried a number of times by writing a new DSO_METHOD where the "dso_load()" handler will call the converter repeatedly. Then the custom converter could use state information in the DSO to suggest different conversions or paths each time it is invoked.
2000-10-26 17:38:59 +00:00
else
sprintf(translated, "%s", filename);
return(translated);
}
#endif /* DSO_DLFCN */