wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/Configurations/10-main.conf

1906 lines
83 KiB
Text
Raw Normal View History

Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
## Standard openssl configuration targets.
##
## If you edit this file, run this command before committing
## make -f Makefile.org TABLE
## This file is interpolated by the Configure script.
# Filler used for when there are no asm files.
my $no_asm_filler="::::::::::::::::void";
%targets = (
# Basic configs that should work on any (32 and less bit) box
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"gcc" => {
cc => "gcc",
cflags => "-O3",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG",
},
"cc" => {
cc => "cc",
cflags => "-O",
thread_cflag => "(unknown)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####VOS Configurations
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"vos-gcc" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-Wall -DOPENSSL_SYS_VOS -D_POSIX_C_SOURCE=200112L -D_BSD -D_VOS_EXTENDED_NAMES -DB_ENDIAN",
debug_cflags => "-O0 -g -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG",
release_cflags => "-O3",
thread_cflag => "(unknown)",
sys_id => "VOS",
lflags => "-Wl,-map",
bn_ops => "BN_LLONG",
shared_extension => ".so",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Solaris x86 with GNU C setups
# -DOPENSSL_NO_INLINE_ASM switches off inline assembler. We have to do it
# here because whenever GNU C instantiates an assembler template it
# surrounds it with #APP #NO_APP comment pair which (at least Solaris
# 7_x86) /usr/ccs/bin/as fails to assemble with "Illegal mnemonic"
# error message.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-x86-gcc" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-O3 -fomit-frame-pointer -march=pentium -Wall -DL_ENDIAN -DOPENSSL_NO_INLINE_ASM",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# -shared -static-libgcc might appear controversial, but modules taken
# from static libgcc do not have relocations and linking them into our
# shared objects doesn't have any negative side-effects. On the contrary,
# doing so makes it possible to use gcc shared build with Sun C. Given
# that gcc generates faster code [thanks to inline assembler], I would
# actually recommend to consider using gcc shared build even with vendor
# compiler:-)
# <appro@fy.chalmers.se>
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris64-x86_64-gcc" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "-m64 -O3 -Wall -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64 -shared -static-libgcc",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Solaris x86 with Sun C setups
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-x86-cc" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "-fast -xarch=generic -O -Xa",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-KPIC",
shared_ldflag => "-G -dy -z text",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"solaris64-x86_64-cc" => {
inherit_from => [ "x86_64_asm" ],
cc => "cc",
cflags => "-fast -xarch=amd64 -xstrconst -Xa -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-KPIC",
shared_ldflag => "-xarch=amd64 -G -dy -z text",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SPARC Solaris with GNU C setups
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv7-gcc" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-O3 -fomit-frame-pointer -Wall -DB_ENDIAN -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv8-gcc" => {
inherit_from => [ "sparcv8_asm" ],
cc => "gcc",
cflags => "-mv8 -Wall -DB_ENDIAN",
debug_cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -O -g",
release_cflags => "-O3 -fomit-frame-pointer -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
# -m32 should be safe to add as long as driver recognizes -mcpu=ultrasparc
"solaris-sparcv9-gcc" => {
inherit_from => [ "sparcv9_asm" ],
cc => "gcc",
cflags => "-mcpu=ultrasparc -Wall -DB_ENDIAN -DBN_DIV2W",
debug_cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -DPEDANTIC -O -g -pedantic -ansi -Wshadow -Wno-long-long -D__EXTENSIONS__",
release_cflags => "-m32 -O3 -fomit-frame-pointer",
thread_cflag => "-D_REENTRANT",
sys_id => "ULTRASPARC",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"solaris64-sparcv9-gcc" => {
inherit_from => [ "sparcv9_asm" ],
cc => "gcc",
cflags => "-m64 -mcpu=ultrasparc -O3 -Wall -DB_ENDIAN",
thread_cflag => "-D_REENTRANT",
sys_id => "ULTRASPARC",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64 -shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SPARC Solaris with Sun C setups
# SC4.0 doesn't pass 'make test', upgrade to SC5.0 or SC4.2.
# SC4.2 is ok, better than gcc even on bn as long as you tell it -xarch=v8
# SC5.0 note: Compiler common patch 107357-01 or later is required!
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv7-cc" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "-xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-KPIC",
shared_ldflag => "-G -dy -z text",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"solaris-sparcv8-cc" => {
inherit_from => [ "sparcv8_asm" ],
cc => "cc",
cflags => "-xarch=v8 -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W",
debug_cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O",
release_cflags => "-xO5 -xdepend",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC1 DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-KPIC",
shared_ldflag => "-G -dy -z text",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"solaris-sparcv9-cc" => {
inherit_from => [ "sparcv9_asm" ],
cc => "cc",
cflags => "-xtarget=ultra -xarch=v8plus -xstrconst -Xa -DB_ENDIAN -DBN_DIV2W",
debug_cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG_ALL -g -O",
release_cflags => "-xO5 -xdepend",
thread_cflag => "-D_REENTRANT",
sys_id => "ULTRASPARC",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK_LL DES_PTR DES_RISC1 DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-KPIC",
shared_ldflag => "-G -dy -z text",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"solaris64-sparcv9-cc" => {
inherit_from => [ "sparcv9_asm" ],
cc => "cc",
cflags => "-xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN",
thread_cflag => "-D_REENTRANT",
sys_id => "ULTRASPARC",
lflags => "-lsocket -lnsl -ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "solaris-shared",
shared_cflag => "-KPIC",
shared_ldflag => "-xarch=v9 -G -dy -z text",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### IRIX 5.x configs
# -mips2 flag is added by ./config when appropriate.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"irix-gcc" => {
inherit_from => [ "mips32_asm" ],
cc => "gcc",
cflags => "-O3 -DB_ENDIAN",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK DES_UNROLL DES_RISC2 DES_PTR BF_PTR",
perlasm_scheme => "o32",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"irix-cc" => {
inherit_from => [ "mips32_asm" ],
cc => "cc",
cflags => "-O2 -use_readonly_const -DB_ENDIAN",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_PTR DES_RISC2 DES_UNROLL BF_PTR",
perlasm_scheme => "o32",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### IRIX 6.x configs
# Only N32 and N64 ABIs are supported. If you need O32 ABI build, invoke
# './Configure irix-cc -o32' manually.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"irix-mips3-gcc" => {
inherit_from => [ "mips64_asm" ],
cc => "gcc",
cflags => "-mabi=n32 -O3 -DB_ENDIAN -DBN_DIV3W",
thread_cflag => "-D_SGI_MP_SOURCE",
bn_ops => "MD2_CHAR RC4_INDEX RC4_CHAR RC4_CHUNK_LL DES_UNROLL DES_RISC2 DES_PTR BF_PTR SIXTY_FOUR_BIT",
perlasm_scheme => "n32",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-mabi=n32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "32",
},
"irix-mips3-cc" => {
inherit_from => [ "mips64_asm" ],
cc => "cc",
cflags => "-n32 -mips3 -O2 -use_readonly_const -G0 -rdata_shared -DB_ENDIAN -DBN_DIV3W",
thread_cflag => "-D_SGI_MP_SOURCE",
bn_ops => "DES_PTR RC4_CHAR RC4_CHUNK_LL DES_RISC2 DES_UNROLL BF_PTR SIXTY_FOUR_BIT",
perlasm_scheme => "n32",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-n32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# N64 ABI builds.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"irix64-mips4-gcc" => {
inherit_from => [ "mips64_asm" ],
cc => "gcc",
cflags => "-mabi=64 -mips4 -O3 -DB_ENDIAN -DBN_DIV3W",
thread_cflag => "-D_SGI_MP_SOURCE",
bn_ops => "RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG",
perlasm_scheme => "64",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-mabi=64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
"irix64-mips4-cc" => {
inherit_from => [ "mips64_asm" ],
cc => "cc",
cflags => "-64 -mips4 -O2 -use_readonly_const -G0 -rdata_shared -DB_ENDIAN -DBN_DIV3W",
thread_cflag => "-D_SGI_MP_SOURCE",
bn_ops => "RC4_CHAR RC4_CHUNK DES_RISC2 DES_UNROLL SIXTY_FOUR_BIT_LONG",
perlasm_scheme => "64",
dso_scheme => "dlfcn",
shared_target => "irix-shared",
shared_ldflag => "-64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Unified HP-UX ANSI C configs.
# Special notes:
# - Originally we were optimizing at +O4 level. It should be noted
# that the only difference between +O3 and +O4 is global inter-
# procedural analysis. As it has to be performed during the link
# stage the compiler leaves behind certain pseudo-code in lib*.a
# which might be release or even patch level specific. Generating
# the machine code for and analyzing the *whole* program appears
# to be *extremely* memory demanding while the performance gain is
# actually questionable. The situation is intensified by the default
# HP-UX data set size limit (infamous 'maxdsiz' tunable) of 64MB
# which is way too low for +O4. In other words, doesn't +O3 make
# more sense?
# - Keep in mind that the HP compiler by default generates code
# suitable for execution on the host you're currently compiling at.
# If the toolkit is ment to be used on various PA-RISC processors
# consider './config +DAportable'.
# - +DD64 is chosen in favour of +DA2.0W because it's meant to be
# compatible with *future* releases.
# - If you run ./Configure hpux-parisc-[g]cc manually don't forget to
# pass -D_REENTRANT on HP-UX 10 and later.
# - -DMD32_XARRAY triggers workaround for compiler bug we ran into in
# 32-bit message digests. (For the moment of this writing) HP C
# doesn't seem to "digest" too many local variables (they make "him"
# chew forever:-). For more details look-up MD32_XARRAY comment in
# crypto/sha/sha_lcl.h.
# <appro@fy.chalmers.se>
#
# Since there is mention of this in shlib/hpux10-cc.sh
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-parisc-cc-o4" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY",
thread_cflag => "-D_REENTRANT",
lflags => "-ldld",
bn_ops => "BN_LLONG DES_PTR DES_UNROLL DES_RISC1",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "-b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"hpux-parisc-gcc" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-O3 -DB_ENDIAN -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
lflags => "-Wl,+s -ldld",
bn_ops => "BN_LLONG DES_PTR DES_UNROLL DES_RISC1",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"hpux-parisc1_1-gcc" => {
inherit_from => [ "parisc11_asm" ],
cc => "gcc",
cflags => "-O3 -DB_ENDIAN -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
lflags => "-Wl,+s -ldld",
bn_ops => "BN_LLONG DES_PTR DES_UNROLL DES_RISC1",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa1.1",
},
"hpux-parisc2-gcc" => {
inherit_from => [ "parisc20_32_asm" ],
cc => "gcc",
cflags => "-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT",
lflags => "-Wl,+s -ldld",
bn_ops => "SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa20_32",
},
"hpux64-parisc2-gcc" => {
cc => "gcc",
cflags => "-O3 -DB_ENDIAN -D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT",
bn_obj => "pa-risc2W.o",
perlasm_scheme => "void",
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "-fpic",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa20_64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# More attempts at unified 10.X and 11.X targets for HP C compiler.
#
# Chris Ruemmler <ruemmler@cup.hp.com>
# Kevin Steves <ks@hp.se>
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-parisc-cc" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY",
thread_cflag => "-D_REENTRANT",
lflags => "-Wl,+s -ldld",
bn_ops => "MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "-b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"hpux-parisc1_1-cc" => {
inherit_from => [ "parisc11_asm" ],
cc => "cc",
cflags => "+DA1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY",
thread_cflag => "-D_REENTRANT",
lflags => "-Wl,+s -ldld",
bn_ops => "MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "-b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa1.1",
},
"hpux-parisc2-cc" => {
inherit_from => [ "parisc20_32_asm" ],
cc => "cc",
cflags => "+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT",
lflags => "-Wl,+s -ldld",
bn_ops => "SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "-b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa20_32",
},
"hpux64-parisc2-cc" => {
inherit_from => [ "parisc20_64_asm" ],
cc => "cc",
cflags => "+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "+DD64 -b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/pa20_64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# HP/UX IA-64 targets
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-ia64-cc" => {
inherit_from => [ "ia64_asm" ],
cc => "cc",
cflags => "-Ae +DD32 +O2 +Olit=all -z -DB_ENDIAN -D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "+DD32 -b",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Frank Geurts <frank.geurts@nl.abnamro.com> has patiently assisted with
# with debugging of the following config.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux64-ia64-cc" => {
inherit_from => [ "ia64_asm" ],
cc => "cc",
cflags => "-Ae +DD64 +O3 +Olit=all -z -DB_ENDIAN -D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "+DD64 -b",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# GCC builds...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-ia64-gcc" => {
inherit_from => [ "ia64_asm" ],
cc => "gcc",
cflags => "-O3 -DB_ENDIAN -D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "-fpic",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux32",
},
"hpux64-ia64-gcc" => {
inherit_from => [ "ia64_asm" ],
cc => "gcc",
cflags => "-mlp64 -O3 -DB_ENDIAN -D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX DES_UNROLL DES_RISC1 DES_INT",
dso_scheme => "dlfcn",
shared_target => "hpux-shared",
shared_cflag => "-fpic",
shared_ldflag => "-mlp64 -shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/hpux64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Legacy HPUX 9.X configs...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hpux-cc" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "-DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY -Ae +ESlit +O2 -z",
thread_cflag => "(unknown)",
lflags => "-Wl,+s -ldld",
bn_ops => "DES_PTR DES_UNROLL DES_RISC1",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "+Z",
shared_ldflag => "-b",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"hpux-gcc" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-DB_ENDIAN -DBN_DIV2W -O3",
thread_cflag => "(unknown)",
lflags => "-Wl,+s -ldld",
bn_ops => "DES_PTR DES_UNROLL DES_RISC1",
dso_scheme => "dl",
shared_target => "hpux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### HP MPE/iX http://jazz.external.hp.com/src/openssl/
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"MPE/iX-gcc" => {
cc => "gcc",
cflags => "-D_ENDIAN -DBN_DIV2W -O3 -D_POSIX_SOURCE -D_SOCKET_SOURCE -I/SYSLOG/PUB",
thread_cflag => "(unknown)",
sys_id => "MPE",
lflags => "-L/SYSLOG/PUB -lsyslog -lsocket -lcurses",
bn_ops => "BN_LLONG DES_PTR DES_UNROLL DES_RISC1",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# DEC Alpha OSF/1/Tru64 targets.
#
# "What's in a name? That which we call a rose
# By any other word would smell as sweet."
#
# - William Shakespeare, "Romeo & Juliet", Act II, scene II.
#
# For gcc, the following gave a %50 speedup on a 164 over the 'DES_INT' version
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"osf1-alpha-gcc" => {
inherit_from => [ "alpha_asm" ],
cc => "gcc",
cflags => "-O3",
thread_cflag => "(unknown)",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_RISC1",
dso_scheme => "dlfcn",
shared_target => "alpha-osf1-shared",
shared_extension => ".so",
},
"osf1-alpha-cc" => {
inherit_from => [ "alpha_asm" ],
cc => "cc",
cflags => "-std1 -tune host -O4 -readonly_strings",
thread_cflag => "(unknown)",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK",
dso_scheme => "dlfcn",
shared_target => "alpha-osf1-shared",
shared_extension => ".so",
},
"tru64-alpha-cc" => {
inherit_from => [ "alpha_asm" ],
cc => "cc",
cflags => "-std1 -tune host -fast -readonly_strings",
thread_cflag => "-pthread",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK",
dso_scheme => "dlfcn",
shared_target => "alpha-osf1-shared",
shared_ldflag => "-msym",
shared_extension => ".so",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####
#### Variety of LINUX:-)
####
# *-generic* is endian-neutral target, but ./config is free to
# throw in -D[BL]_ENDIAN, whichever appropriate...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-generic32" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-O3 -fomit-frame-pointer -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-ppc" => {
inherit_from => [ "ppc32_asm" ],
cc => "gcc",
cflags => "-DB_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL",
perlasm_scheme => "linux32",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#######################################################################
# Note that -march is not among compiler options in below linux-armv4
# target line. Not specifying one is intentional to give you choice to:
#
# a) rely on your compiler default by not specifying one;
# b) specify your target platform explicitly for optimal performance,
# e.g. -march=armv6 or -march=armv7-a;
# c) build "universal" binary that targets *range* of platforms by
# specifying minimum and maximum supported architecture;
#
# As for c) option. It actually makes no sense to specify maximum to be
# less than ARMv7, because it's the least requirement for run-time
# switch between platform-specific code paths. And without run-time
# switch performance would be equivalent to one for minimum. Secondly,
# there are some natural limitations that you'd have to accept and
# respect. Most notably you can *not* build "universal" binary for
# big-endian platform. This is because ARMv7 processor always picks
# instructions in little-endian order. Another similar limitation is
# that -mthumb can't "cross" -march=armv6t2 boundary, because that's
# where it became Thumb-2. Well, this limitation is a bit artificial,
# because it's not really impossible, but it's deemed too tricky to
# support. And of course you have to be sure that your binutils are
# actually up to the task of handling maximum target platform. With all
# this in mind here is an example of how to configure "universal" build:
#
# ./Configure linux-armv4 -march=armv6 -D__ARM_MAX_ARCH__=8
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-armv4" => {
inherit_from => [ "armv4_asm" ],
cc => "gcc",
cflags => "-O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-aarch64" => {
inherit_from => [ "aarch64_asm" ],
cc => "gcc",
cflags => "-O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
perlasm_scheme => "linux64",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Configure script adds minimally required -march for assembly support,
# if no -march was specified at command line. mips32 and mips64 below
# refer to contemporary MIPS Architecture specifications, MIPS32 and
# MIPS64, rather than to kernel bitness.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-mips32" => {
inherit_from => [ "mips32_asm" ],
cc => "gcc",
cflags => "-mabi=32 -O3 -Wall -DBN_DIV3W",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
perlasm_scheme => "o32",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-mips64" => {
inherit_from => [ "mips64_asm" ],
cc => "gcc",
cflags => "-mabi=n32 -O3 -Wall -DBN_DIV3W",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
perlasm_scheme => "n32",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-mabi=n32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "32",
},
"linux64-mips64" => {
inherit_from => [ "mips64_asm" ],
cc => "gcc",
cflags => "-mabi=64 -O3 -Wall -DBN_DIV3W",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
perlasm_scheme => "64",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-mabi=64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### IA-32 targets...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-ia32-icc" => {
inherit_from => [ "x86_elf_asm" ],
cc => "icc",
cflags => "-DL_ENDIAN -O2",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl -no_cpprt",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-KPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-elf" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -fomit-frame-pointer -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-aout" => {
inherit_from => [ "x86_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -fomit-frame-pointer -march=i486 -Wall",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "a.out",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
####
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-generic64" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-ppc64" => {
inherit_from => [ "ppc64_asm" ],
cc => "gcc",
cflags => "-m64 -DB_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL",
perlasm_scheme => "linux64",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
"linux-ppc64le" => {
inherit_from => [ "ppc64_asm" ],
cc => "gcc",
cflags => "-m64 -DL_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL",
perlasm_scheme => "linux64le",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-ia64" => {
inherit_from => [ "ia64_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-ia64-icc" => {
inherit_from => [ "ia64_asm" ],
cc => "icc",
cflags => "-DL_ENDIAN -O2 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl -no_cpprt",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_INT",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-x86_64" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "-m64 -DL_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
"linux-x86_64-clang" => {
inherit_from => [ "x86_64_asm" ],
cc => "clang",
cflags => "-m64 -DL_ENDIAN -O3 -Weverything $clang_disabled_warnings -Qunused-arguments",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
"linux-x86_64-icc" => {
inherit_from => [ "x86_64_asm" ],
cc => "icc",
cflags => "-DL_ENDIAN -O2",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl -no_cpprt",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
"linux-x32" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "-mx32 -DL_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-mx32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "x32",
},
"linux64-s390x" => {
inherit_from => [ "s390x_asm" ],
cc => "gcc",
cflags => "-m64 -DB_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "64",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### So called "highgprs" target for z/Architecture CPUs
# "Highgprs" is kernel feature first implemented in Linux 2.6.32, see
# /proc/cpuinfo. The idea is to preserve most significant bits of
# general purpose registers not only upon 32-bit process context
# switch, but even on asynchronous signal delivery to such process.
# This makes it possible to deploy 64-bit instructions even in legacy
# application context and achieve better [or should we say adequate]
# performance. The build is binary compatible with linux-generic32,
# and the idea is to be able to install the resulting libcrypto.so
# alongside generic one, e.g. as /lib/highgprs/libcrypto.so.x.y, for
# ldconfig and run-time linker to autodiscover. Unfortunately it
# doesn't work just yet, because of couple of bugs in glibc
# sysdeps/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux32-s390x" => {
inherit_from => [ "s390x_32_asm" ],
cc => "gcc",
cflags => "-m31 -Wa,-mzarch -DB_ENDIAN -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "31",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m31",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "/highgprs",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SPARC Linux setups
# Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
# assisted with debugging of following two configs.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-sparcv8" => {
inherit_from => [ "sparcv8_asm" ],
cc => "gcc",
cflags => "-mv8 -DB_ENDIAN -O3 -fomit-frame-pointer -Wall -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# it's a real mess with -mcpu=ultrasparc option under Linux, but
# -Wa,-Av8plus should do the trick no matter what.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-sparcv9" => {
inherit_from => [ "sparcv9_asm" ],
cc => "gcc",
cflags => "-m32 -mcpu=ultrasparc -DB_ENDIAN -O3 -fomit-frame-pointer -Wall -Wa,-Av8plus -DBN_DIV2W",
thread_cflag => "-D_REENTRANT",
sys_id => "ULTRASPARC",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m32",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# GCC 3.1 is a requirement
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux64-sparcv9" => {
inherit_from => [ "sparcv9_asm" ],
cc => "gcc",
cflags => "-m64 -mcpu=ultrasparc -DB_ENDIAN -O3 -fomit-frame-pointer -Wall",
thread_cflag => "-D_REENTRANT",
sys_id => "ULTRASPARC",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-m64",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
multilib => "64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### Alpha Linux with GNU C and Compaq C setups
# Special notes:
# - linux-alpha+bwx-gcc is ment to be used from ./config only. If you
# ought to run './Configure linux-alpha+bwx-gcc' manually, do
# complement the command line with -mcpu=ev56, -mcpu=ev6 or whatever
# which is appropriate.
# - If you use ccc keep in mind that -fast implies -arch host and the
# compiler is free to issue instructions which gonna make elder CPU
# choke. If you wish to build "blended" toolkit, add -arch generic
# *after* -fast and invoke './Configure linux-alpha-ccc' manually.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-alpha-gcc" => {
inherit_from => [ "alpha_asm" ],
cc => "gcc",
cflags => "-O3 -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_RISC1 DES_UNROLL",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-alpha+bwx-gcc" => {
inherit_from => [ "alpha_asm" ],
cc => "gcc",
cflags => "-O3 -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_RISC1 DES_UNROLL",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"linux-alpha-ccc" => {
inherit_from => [ "alpha_asm" ],
cc => "ccc",
cflags => "-fast -readonly_strings -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL",
},
"linux-alpha+bwx-ccc" => {
inherit_from => [ "alpha_asm" ],
cc => "ccc",
cflags => "-fast -readonly_strings -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC1 DES_UNROLL",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#
# TI_CGT_C6000_7.3.x is a requirement
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"linux-c64xplus" => {
cc => "cl6x",
cflags => "--linux -ea=.s -eo=.o -mv6400+ -o2 -ox -ms -pden -DOPENSSL_SMALL_FOOTPRINT",
thread_cflag => "-D_REENTRANT",
bn_ops => "BN_LLONG",
cpuid_obj => "c64xpluscpuid.o",
bn_obj => "bn-c64xplus.o c64xplus-gf2m.o",
aes_obj => "aes-c64xplus.o aes_cbc.o aes_ctr.o",
sha1_obj => "sha1-c64xplus.o sha256-c64xplus.o sha512-c64xplus.o",
rc4_obj => "rc4-c64xplus.o",
modes_obj => "ghash-c64xplus.o",
perlasm_scheme => "void",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "--pic",
shared_ldflag => "-z --sysv --shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
ranlib => "true",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Android: linux-* but without pointers to headers and libs.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"android" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"android-x86" => {
inherit_from => [ "android_x86_elf_asm" ],
cc => "gcc",
cflags => "-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"android-armv7" => {
inherit_from => [ "armv4_asm" ],
cc => "gcc",
cflags => "-march=armv7-a -mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -fomit-frame-pointer -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"android-mips" => {
inherit_from => [ "mips32_asm" ],
cc => "gcc",
cflags => "-mandroid -I\$(ANDROID_DEV)/include -B\$(ANDROID_DEV)/lib -O3 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
perlasm_scheme => "o32",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### *BSD [do see comment about ${BSDthreads} in Configure!]
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BSD-generic32" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-O3 -fomit-frame-pointer -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"BSD-x86" => {
inherit_from => [ "x86_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -fomit-frame-pointer -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "a.out",
dso_scheme => "dlfcn",
shared_target => "bsd-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"BSD-x86-elf" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -Wall",
debug_cflags => "-g",
release_cflags => "-fomit-frame-pointer",
thread_cflag => "${BSDthreads}",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "bsd-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"BSD-sparcv8" => {
inherit_from => [ "sparcv8_asm" ],
cc => "gcc",
cflags => "-DB_ENDIAN -O3 -mv8 -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BSD-generic64" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
cflags => "-O3 -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# -DMD32_REG_T=int doesn't actually belong in sparc64 target, it
# simply *happens* to work around a compiler bug in gcc 3.3.3,
# triggered by RIPEMD160 code.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BSD-sparc64" => {
inherit_from => [ "sparcv9_asm" ],
cc => "gcc",
cflags => "-DB_ENDIAN -O3 -DMD32_REG_T=int -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "BN_LLONG RC2_CHAR RC4_CHUNK DES_INT DES_PTR DES_RISC2 BF_PTR",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"BSD-ia64" => {
inherit_from => [ "ia64_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_UNROLL DES_INT",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"BSD-x86_64" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -Wall",
thread_cflag => "${BSDthreads}",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "elf",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"bsdi-elf-gcc" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DPERL5 -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall",
thread_cflag => "(unknown)",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"nextstep" => {
cc => "cc",
cflags => "-O -Wall",
unistd => "<libc.h>",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
},
"nextstep3.3" => {
cc => "cc",
cflags => "-O3 -Wall",
unistd => "<libc.h>",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# QNX
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"qnx4" => {
cc => "cc",
cflags => "-DL_ENDIAN -DTERMIO",
thread_cflag => "(unknown)",
bn_ops => "${x86_gcc_des} ${x86_gcc_opts}",
},
"QNX6" => {
inherit_from => [ "no_asm_filler" ],
cc => "gcc",
lflags => "-lsocket",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"QNX6-i386" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O2 -Wall",
lflags => "-lsocket",
bn_ops => "${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "bsd-gcc-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### SCO/Caldera targets.
#
# Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
# Now we only have blended unixware-* as it's the only one used by ./config.
# If you want to optimize for particular microarchitecture, bypass ./config
# and './Configure unixware-7 -Kpentium_pro' or whatever appropriate.
# Note that not all targets include assembler support. Mostly because of
# lack of motivation to support out-of-date platforms with out-of-date
# compiler drivers and assemblers. Tim Rice <tim@multitalents.net> has
# patiently assisted to debug most of it.
#
# UnixWare 2.0x fails destest with -O.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"unixware-2.0" => {
cc => "cc",
cflags => "-DFILIO_H -DNO_STRINGS_H",
thread_cflag => "-Kthread",
lflags => "-lsocket -lnsl -lresolv -lx",
bn_ops => "${x86_gcc_des} ${x86_gcc_opts}",
},
"unixware-2.1" => {
cc => "cc",
cflags => "-O -DFILIO_H",
thread_cflag => "-Kthread",
lflags => "-lsocket -lnsl -lresolv -lx",
bn_ops => "${x86_gcc_des} ${x86_gcc_opts}",
},
"unixware-7" => {
inherit_from => [ "x86_elf_asm" ],
cc => "cc",
cflags => "-O -DFILIO_H -Kalloca",
thread_cflag => "-Kthread",
lflags => "-lsocket -lnsl",
bn_ops => "BN_LLONG MD2_CHAR RC4_INDEX ${x86_gcc_des}",
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "svr5-shared",
shared_cflag => "-Kpic",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"unixware-7-gcc" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -DFILIO_H -O3 -fomit-frame-pointer -march=pentium -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-lsocket -lnsl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "gnu-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# SCO 5 - Ben Laurie <ben@algroup.co.uk> says the -O breaks the SCO cc.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"sco5-cc" => {
inherit_from => [ "x86_elf_asm" ],
cc => "cc",
cflags => "-belf",
thread_cflag => "(unknown)",
lflags => "-lsocket -lnsl",
bn_ops => "${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "svr3-shared",
shared_cflag => "-Kpic",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
"sco5-gcc" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-O3 -fomit-frame-pointer",
thread_cflag => "(unknown)",
lflags => "-lsocket -lnsl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "elf-1",
dso_scheme => "dlfcn",
shared_target => "svr3-shared",
shared_cflag => "-fPIC",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
#### IBM's AIX.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"aix3-cc" => {
cc => "cc",
cflags => "-O -DB_ENDIAN -qmaxmem=16384",
thread_cflag => "(unknown)",
sys_id => "AIX",
bn_ops => "BN_LLONG RC4_CHAR",
},
"aix-gcc" => {
inherit_from => [ "ppc32_asm" ],
cc => "gcc",
cflags => "-O -DB_ENDIAN",
thread_cflag => "-pthread",
sys_id => "AIX",
bn_ops => "BN_LLONG RC4_CHAR",
perlasm_scheme => "aix32",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
shared_ldflag => "-shared -Wl,-G",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X32",
},
"aix64-gcc" => {
inherit_from => [ "ppc64_asm" ],
cc => "gcc",
cflags => "-maix64 -O -DB_ENDIAN",
thread_cflag => "-pthread",
sys_id => "AIX",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
perlasm_scheme => "aix64",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
shared_ldflag => "-maix64 -shared -Wl,-G",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Below targets assume AIX 5. Idea is to effectively disregard $OBJECT_MODE
# at build time. $OBJECT_MODE is respected at ./config stage!
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"aix-cc" => {
inherit_from => [ "ppc32_asm" ],
cc => "cc",
cflags => "-q32 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst",
thread_cflag => "-qthreaded -D_THREAD_SAFE",
sys_id => "AIX",
bn_ops => "BN_LLONG RC4_CHAR",
perlasm_scheme => "aix32",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
shared_ldflag => "-q32 -G",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X 32",
},
"aix64-cc" => {
inherit_from => [ "ppc64_asm" ],
cc => "cc",
cflags => "-q64 -O -DB_ENDIAN -qmaxmem=16384 -qro -qroconst",
thread_cflag => "-qthreaded -D_THREAD_SAFE",
sys_id => "AIX",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR",
perlasm_scheme => "aix64",
dso_scheme => "dlfcn",
shared_target => "aix-shared",
shared_ldflag => "-q64 -G",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
arflags => "-X 64",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# SIEMENS BS2000/OSD: an EBCDIC-based mainframe
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BS2000-OSD" => {
cc => "c89",
cflags => "-O -XLLML -XLLMK -XL -DB_ENDIAN -DCHARSET_EBCDIC",
thread_cflag => "(unknown)",
lflags => "-lsocket -lnsl",
bn_ops => "THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# OS/390 Unix an EBCDIC-based Unix system on IBM mainframe
# You need to compile using the c89.sh wrapper in the tools directory, because the
# IBM compiler does not like the -L switch after any object modules.
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"OS390-Unix" => {
cc => "c89.sh",
cflags => "-O -DB_ENDIAN -DCHARSET_EBCDIC -DNO_SYS_PARAM_H -D_ALL_SOURCE",
thread_cflag => "(unknown)",
bn_ops => "THIRTY_TWO_BIT DES_PTR DES_UNROLL MD2_CHAR RC4_INDEX RC4_CHAR BF_PTR",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Visual C targets
#
# Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
#
# Note about -wd4090, disable warning C4090. This warning returns false
# positives in some situations. Disabling it altogether masks both
# legitimate and false cases, but as we compile on multiple platforms,
# we rely on other compilers to catch legitimate cases.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"VC-WIN64I" => {
cc => "cl",
cflags => "-W3 -wd4090 -Gs0 -Gy -nologo -DOPENSSL_SYS_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE",
sys_id => "WIN64I",
bn_ops => "SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN",
cpuid_obj => "ia64cpuid.o",
bn_obj => "ia64.o ia64-mont.o",
aes_obj => "aes_core.o aes_cbc.o aes-ia64.o",
md5_obj => "md5-ia64.o",
sha1_obj => "sha1-ia64.o sha256-ia64.o sha512-ia64.o",
modes_obj => "ghash-ia64.o",
perlasm_scheme => "ias",
dso_scheme => "win32",
},
"debug-VC-WIN64I" => {
cc => "cl",
cflags => "-W3 -wd4090 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYS_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE",
sys_id => "WIN64I",
bn_ops => "SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN",
cpuid_obj => "ia64cpuid.o",
bn_obj => "ia64.o",
aes_obj => "aes_core.o aes_cbc.o aes-ia64.o",
md5_obj => "md5-ia64.o",
sha1_obj => "sha1-ia64.o sha256-ia64.o sha512-ia64.o",
modes_obj => "ghash-ia64.o",
perlasm_scheme => "ias",
dso_scheme => "win32",
},
"VC-WIN64A" => {
inherit_from => [ "win_x86_64_asm" ],
cc => "cl",
cflags => "-W3 -wd4090 -Gs0 -Gy -nologo -DOPENSSL_SYS_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE",
debug_cflags => "-Zi",
sys_id => "WIN64A",
bn_ops => "SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN",
perlasm_scheme => "auto",
dso_scheme => "win32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# x86 Win32 target defaults to ANSI API, if you want UNICODE, complement
# 'perl Configure VC-WIN32' with '-DUNICODE -D_UNICODE'
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"VC-WIN32" => {
inherit_from => [ "x86_asm" ],
cc => "cl",
cflags => "-W3 -wd4090 -Gs0 -GF -Gy -nologo -DOPENSSL_SYS_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -D_CRT_SECURE_NO_DEPRECATE",
debug_cflags => "-Zi",
sys_id => "WIN32",
bn_ops => "BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}",
perlasm_scheme => "win32n",
dso_scheme => "win32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Unified CE target
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"VC-CE" => {
inherit_from => [ "no_asm_filler" ],
cc => "cl",
sys_id => "WINCE",
bn_ops => "BN_LLONG RC4_INDEX EXPORT_VAR_AS_FN ${x86_gcc_opts}",
dso_scheme => "win32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Borland C++ 4.5
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"BC-32" => {
inherit_from => [ "no_asm_filler" ],
cc => "bcc32",
sys_id => "WIN32",
bn_ops => "BN_LLONG DES_PTR RC4_INDEX EXPORT_VAR_AS_FN",
dso_scheme => "win32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# MinGW
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"mingw" => {
inherit_from => [ "x86_asm" ],
cc => "gcc",
cflags => "-mno-cygwin -DL_ENDIAN -DWIN32_LEAN_AND_MEAN -fomit-frame-pointer -O3 -march=i486 -Wall",
thread_cflag => "-D_MT",
sys_id => "MINGW32",
lflags => "-lws2_32 -lgdi32 -lcrypt32",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts} EXPORT_VAR_AS_FN",
perlasm_scheme => "coff",
dso_scheme => "win32",
shared_target => "cygwin-shared",
shared_cflag => "-D_WINDLL -DOPENSSL_USE_APPLINK",
shared_ldflag => "-mno-cygwin",
shared_extension => ".dll.a",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# As for OPENSSL_USE_APPLINK. Applink makes it possible to use .dll
# compiled with one compiler with application compiled with another
# compiler. It's possible to engage Applink support in mingw64 build,
# but it's not done, because till mingw64 supports structured exception
# handling, one can't seriously consider its binaries for using with
# non-mingw64 run-time environment. And as mingw64 is always consistent
# with itself, Applink is never engaged and can as well be omitted.
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"mingw64" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "-mno-cygwin -DL_ENDIAN -O3 -Wall -DWIN32_LEAN_AND_MEAN -DUNICODE -D_UNICODE",
thread_cflag => "-D_MT",
sys_id => "MINGW64",
lflags => "-lws2_32 -lgdi32 -lcrypt32",
bn_ops => "SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN",
perlasm_scheme => "mingw64",
dso_scheme => "win32",
shared_target => "cygwin-shared",
shared_cflag => "-D_WINDLL",
shared_ldflag => "-mno-cygwin",
shared_extension => ".dll.a",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# UWIN
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"UWIN" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "-DTERMIOS -DL_ENDIAN -O -Wall",
sys_id => "UWIN",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "win32",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Cygwin
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"Cygwin" => {
inherit_from => [ "x86_asm" ],
cc => "gcc",
cflags => "-DTERMIOS -DL_ENDIAN -fomit-frame-pointer -O3 -march=i486 -Wall",
sys_id => "CYGWIN",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "coff",
dso_scheme => "dlfcn",
shared_target => "cygwin-shared",
shared_cflag => "-D_WINDLL",
shared_ldflag => "-shared",
shared_extension => ".dll.a",
},
"Cygwin-x86_64" => {
inherit_from => [ "x86_64_asm" ],
cc => "gcc",
cflags => "-DTERMIOS -DL_ENDIAN -O3 -Wall",
sys_id => "CYGWIN",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "mingw64",
dso_scheme => "dlfcn",
shared_target => "cygwin-shared",
shared_cflag => "-D_WINDLL",
shared_ldflag => "-shared",
shared_extension => ".dll.a",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# NetWare from David Ward (dsward@novell.com)
# requires either MetroWerks NLM development tools, or gcc / nlmconv
# NetWare defaults socket bio to WinSock sockets. However,
# the builds can be configured to use BSD sockets instead.
# netware-clib => legacy CLib c-runtime support
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"netware-clib" => {
cc => "mwccnlm",
bn_ops => "${x86_gcc_opts}",
},
"netware-clib-bsdsock" => {
cc => "mwccnlm",
bn_ops => "${x86_gcc_opts}",
},
"netware-clib-gcc" => {
cc => "i586-netware-gcc",
cflags => "-nostdinc -I/ndk/nwsdk/include/nlm -I/ndk/ws295sdk/include -DL_ENDIAN -DNETWARE_CLIB -DOPENSSL_SYS_NETWARE -O2 -Wall",
bn_ops => "${x86_gcc_opts}",
},
"netware-clib-bsdsock-gcc" => {
cc => "i586-netware-gcc",
cflags => "-nostdinc -I/ndk/nwsdk/include/nlm -DNETWARE_BSDSOCK -DNETDB_USE_INTERNET -DL_ENDIAN -DNETWARE_CLIB -DOPENSSL_SYS_NETWARE -O2 -Wall",
bn_ops => "${x86_gcc_opts}",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# netware-libc => LibC/NKS support
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"netware-libc" => {
cc => "mwccnlm",
bn_ops => "BN_LLONG ${x86_gcc_opts}",
},
"netware-libc-bsdsock" => {
cc => "mwccnlm",
bn_ops => "BN_LLONG ${x86_gcc_opts}",
},
"netware-libc-gcc" => {
cc => "i586-netware-gcc",
cflags => "-nostdinc -I/ndk/libc/include -I/ndk/libc/include/winsock -DL_ENDIAN -DNETWARE_LIBC -DOPENSSL_SYS_NETWARE -DTERMIO -O2 -Wall",
bn_ops => "BN_LLONG ${x86_gcc_opts}",
},
"netware-libc-bsdsock-gcc" => {
cc => "i586-netware-gcc",
cflags => "-nostdinc -I/ndk/libc/include -DNETWARE_BSDSOCK -DL_ENDIAN -DNETWARE_LIBC -DOPENSSL_SYS_NETWARE -DTERMIO -O2 -Wall",
bn_ops => "BN_LLONG ${x86_gcc_opts}",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# DJGPP
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"DJGPP" => {
inherit_from => [ "x86_asm" ],
cc => "gcc",
cflags => "-I/dev/env/WATT_ROOT/inc -DTERMIO -DL_ENDIAN -fomit-frame-pointer -O2 -Wall",
sys_id => "MSDOS",
lflags => "-L/dev/env/WATT_ROOT/lib -lwatt",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
perlasm_scheme => "a.out",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# Ultrix from Bernhard Simon <simon@zid.tuwien.ac.at>
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"ultrix-cc" => {
cc => "cc",
cflags => "-std1 -O -Olimit 2500 -DL_ENDIAN",
thread_cflag => "(unknown)",
},
"ultrix-gcc" => {
cc => "gcc",
cflags => "-O3 -DL_ENDIAN",
thread_cflag => "(unknown)",
bn_ops => "BN_LLONG",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# K&R C is no longer supported; you need gcc on old Ultrix installations
##"ultrix","cc:-O2 -DNOPROTO -DNOCONST -DL_ENDIAN::(unknown):::::::",
##### MacOS X (a.k.a. Darwin) setup
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"darwin-ppc-cc" => {
inherit_from => [ "ppc32_asm" ],
cc => "cc",
cflags => "-arch ppc -O3 -DB_ENDIAN -Wa,-force_cpusubtype_ALL",
thread_cflag => "-D_REENTRANT",
sys_id => "MACOSX",
lflags => "-Wl,-search_paths_first%",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
perlasm_scheme => "osx32",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-arch ppc -dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
"debug-darwin-ppc-cc" => {
inherit_from => [ "ppc32_asm" ],
cc => "cc",
cflags => "-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DB_ENDIAN -g -Wall -O",
thread_cflag => "-D_REENTRANT",
sys_id => "MACOSX",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
perlasm_scheme => "osx32",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
"darwin64-ppc-cc" => {
inherit_from => [ "ppc64_asm" ],
cc => "cc",
cflags => "-arch ppc64 -O3 -DB_ENDIAN",
thread_cflag => "-D_REENTRANT",
sys_id => "MACOSX",
lflags => "-Wl,-search_paths_first%",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
perlasm_scheme => "osx64",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-arch ppc64 -dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
"darwin-i386-cc" => {
inherit_from => [ "x86_asm_nocast" ],
cc => "cc",
cflags => "-arch i386 -O3 -fomit-frame-pointer -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
sys_id => "MACOSX",
lflags => "-Wl,-search_paths_first%",
bn_ops => "BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR",
perlasm_scheme => "macosx",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-arch i386 -dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
"debug-darwin-i386-cc" => {
inherit_from => [ "x86_asm" ],
cc => "cc",
cflags => "-arch i386 -g3 -DL_ENDIAN",
thread_cflag => "-D_REENTRANT",
sys_id => "MACOSX",
lflags => "-Wl,-search_paths_first%",
bn_ops => "BN_LLONG RC4_INT RC4_CHUNK DES_UNROLL BF_PTR",
perlasm_scheme => "macosx",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-arch i386 -dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
"darwin64-x86_64-cc" => {
inherit_from => [ "x86_64_asm" ],
cc => "cc",
cflags => "-arch x86_64 -DL_ENDIAN -Wall",
debug_cflags => "-ggdb -g2 -O0",
release_cflags => "-O3",
thread_cflag => "-D_REENTRANT",
sys_id => "MACOSX",
lflags => "-Wl,-search_paths_first%",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL",
perlasm_scheme => "macosx",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-arch x86_64 -dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# iPhoneOS/iOS
#
# It takes three prior-set environment variables to make it work:
#
# CROSS_COMPILE=/where/toolchain/is/usr/bin/ [note ending slash]
# CROSS_TOP=/where/SDKs/are
# CROSS_SDK=iPhoneOSx.y.sdk
#
# Exact paths vary with Xcode releases, but for couple of last ones
# they would look like this:
#
# CROSS_COMPILE=`xcode-select --print-path`/Toolchains/XcodeDefault.xctoolchain/usr/bin/
# CROSS_TOP=`xcode-select --print-path`/Platforms/iPhoneOS.platform/Developer
# CROSS_SDK=iPhoneOS7.0.sdk
#
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"iphoneos-cross" => {
inherit_from => [ "no_asm_filler" ],
cc => "cc",
cflags => "-O3 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fomit-frame-pointer -fno-common",
thread_cflag => "-D_REENTRANT",
sys_id => "iOS",
lflags => "-Wl,-search_paths_first%",
bn_ops => "BN_LLONG RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
"ios64-cross" => {
inherit_from => [ "aarch64_asm" ],
cc => "cc",
cflags => "-O3 -arch arm64 -mios-version-min=7.0.0 -isysroot \$(CROSS_TOP)/SDKs/\$(CROSS_SDK) -fno-common",
thread_cflag => "-D_REENTRANT",
sys_id => "iOS",
lflags => "-Wl,-search_paths_first%",
bn_ops => "SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR",
perlasm_scheme => "ios64",
dso_scheme => "dlfcn",
shared_target => "darwin-shared",
shared_cflag => "-fPIC -fno-common",
shared_ldflag => "-dynamiclib",
shared_extension => ".\$(SHLIB_MAJOR).\$(SHLIB_MINOR).dylib",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### A/UX
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"aux3-gcc" => {
cc => "gcc",
cflags => "-O2 -DTERMIO",
thread_cflag => "(unknown)",
sys_id => "AUX",
lflags => "-lbsd",
bn_ops => "RC4_CHAR RC4_CHUNK DES_UNROLL BF_PTR",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### GNU Hurd
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"hurd-x86" => {
inherit_from => [ "x86_elf_asm" ],
cc => "gcc",
cflags => "-DL_ENDIAN -O3 -fomit-frame-pointer -march=i486 -Wall",
thread_cflag => "-D_REENTRANT",
lflags => "-ldl",
bn_ops => "BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}",
dso_scheme => "dlfcn",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### OS/2 EMX
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"OS2-EMX" => {
cc => "gcc",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
##### VxWorks for various targets
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"vxworks-ppc60x" => {
cc => "ccppc",
cflags => "-D_REENTRANT -mrtp -mhard-float -mstrict-align -fno-implicit-fp -DPPC32_fp60x -O2 -fstrength-reduce -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip",
sys_id => "VXWORKS",
lflags => "-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/common",
},
"vxworks-ppcgen" => {
cc => "ccppc",
cflags => "-D_REENTRANT -mrtp -msoft-float -mstrict-align -O1 -fno-builtin -fno-strict-aliasing -Wall -DCPU=PPC32 -DTOOL_FAMILY=gnu -DTOOL=gnu -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/usr/h/wrn/coreip",
sys_id => "VXWORKS",
lflags => "-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/ppc/PPC32/sfcommon",
},
"vxworks-ppc405" => {
cc => "ccppc",
cflags => "-g -msoft-float -mlongcall -DCPU=PPC405 -I\$(WIND_BASE)/target/h",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-ppc750" => {
cc => "ccppc",
cflags => "-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h \$(DEBUG_FLAG)",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-ppc750-debug" => {
cc => "ccppc",
cflags => "-ansi -nostdinc -DPPC750 -D_REENTRANT -fvolatile -fno-builtin -fno-for-scope -fsigned-char -Wall -msoft-float -mlongcall -DCPU=PPC604 -I\$(WIND_BASE)/target/h -DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DPEDANTIC -DDEBUG_SAFESTACK -DDEBUG -g",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-ppc860" => {
cc => "ccppc",
cflags => "-nostdinc -msoft-float -DCPU=PPC860 -DNO_STRINGS_H -I\$(WIND_BASE)/target/h",
sys_id => "VXWORKS",
lflags => "-r",
},
"vxworks-simlinux" => {
inherit_from => [ "no_asm_filler" ],
cc => "ccpentium",
cflags => "-B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DL_ENDIAN -DCPU=SIMLINUX -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/h -I\$(WIND_BASE)/target/h/wrn/coreip -DOPENSSL_NO_HW_PADLOCK",
sys_id => "VXWORKS",
lflags => "-r",
ranlib => "ranlibpentium",
},
"vxworks-mips" => {
inherit_from => [ "mips32_asm" ],
cc => "ccmips",
cflags => "-mrtp -mips2 -O -G 0 -B\$(WIND_BASE)/host/\$(WIND_HOST_TYPE)/lib/gcc-lib/ -D_VSB_CONFIG_FILE=\"\$(WIND_BASE)/target/lib/h/config/vsbConfig.h\" -DCPU=MIPS32 -msoft-float -mno-branch-likely -DTOOL_FAMILY=gnu -DTOOL=gnu -fno-builtin -fno-defer-pop -DNO_STRINGS_H -I\$(WIND_BASE)/target/usr/h -I\$(WIND_BASE)/target/h/wrn/coreip",
thread_cflag => "-D_REENTRANT",
sys_id => "VXWORKS",
lflags => "-Wl,--defsym,__wrs_rtp_base=0xe0000000 -L \$(WIND_BASE)/target/usr/lib/mips/MIPSI32/sfcommon",
perlasm_scheme => "o32",
ranlib => "ranlibmips",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
# uClinux
Change all the main configurations to the new format. As part of this, remove some levitte examples that never were relevant. Reviewed-by: Andy Polyakov <appro@openssl.org>
2015-03-10 23:58:50 +00:00
"uClinux-dist" => {
inherit_from => [ "no_asm_filler" ],
cc => "$ENV{'CC'}",
cflags => "\$(CFLAGS)",
thread_cflag => "-D_REENTRANT",
lflags => "\$(LDFLAGS) \$(LDLIBS)",
bn_ops => "BN_LLONG",
dso_scheme => "$ENV{'LIBSSL_dlfcn'}",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
ranlib => "$ENV{'RANLIB'}",
},
"uClinux-dist64" => {
inherit_from => [ "no_asm_filler" ],
cc => "$ENV{'CC'}",
cflags => "\$(CFLAGS)",
thread_cflag => "-D_REENTRANT",
lflags => "\$(LDFLAGS) \$(LDLIBS)",
bn_ops => "SIXTY_FOUR_BIT_LONG",
dso_scheme => "$ENV{'LIBSSL_dlfcn'}",
shared_target => "linux-shared",
shared_cflag => "-fPIC",
shared_ldflag => "-shared",
shared_extension => ".so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
ranlib => "$ENV{'RANLIB'}",
},
Move build config table to separate files. Move the build configuration table into separate files. The Configurations file is standard configs, and Configurations.team is for openssl-team members. Any other file, Configurations*, found in the same directory as the Configure script, is loaded. To add another file, use --config=FILE flags (which should probably be an absolute path). Written by Stefen Eissing <stefan.eissing@greenbytes.de> and Rich Salz <rsalz@openssl.org>, contributed by Akamai Technologies. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-02-24 22:40:22 +00:00
);
Reference in a new issue Copy permalink