openssl/crypto/chacha/asm/chacha-x86_64.pl

2238 lines
55 KiB
Perl
Raw Normal View History

#!/usr/bin/env perl
#
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
# November 2014
#
# ChaCha20 for x86_64.
#
# Performance in cycles per byte out of large buffer.
#
# IALU/gcc 4.8(i) 1xSSSE3/SSE2 4xSSSE3 8xAVX2
#
# P4 9.48/+99% -/22.7(ii) -
# Core2 7.83/+55% 7.90/8.08 4.35
# Westmere 7.19/+50% 5.60/6.70 3.00
# Sandy Bridge 8.31/+42% 5.45/6.76 2.72
# Ivy Bridge 6.71/+46% 5.40/6.49 2.41
# Haswell 5.92/+43% 5.20/6.45 2.42 1.23
# Silvermont 12.0/+33% 7.75/7.40 7.03(iii)
# Sledgehammer 7.28/+52% -/14.2(ii) -
# Bulldozer 9.66/+28% 9.85/11.1 3.06(iv)
# VIA Nano 10.5/+46% 6.72/8.60 6.05
#
# (i) compared to older gcc 3.x one can observe >2x improvement on
# most platforms;
# (ii) as it can be seen, SSE2 performance is too low on legacy
# processors; NxSSE2 results are naturally better, but not
# impressively better than IALU ones, which is why you won't
# find SSE2 code below;
# (iii) this is not optimal result for Atom because of MSROM
# limitations, SSE2 can do better, but gain is considered too
# low to justify the [maintenance] effort;
# (iv) Bulldozer actually executes 4xXOP code path that delivers 2.20;
$flavour = shift;
$output = shift;
if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
=~ /GNU assembler version ([2-9]\.[0-9]+)/) {
$avx = ($1>=2.19) + ($1>=2.22);
}
if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
`nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)/) {
$avx = ($1>=2.09) + ($1>=2.10);
}
if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
`ml64 2>&1` =~ /Version ([0-9]+)\./) {
$avx = ($1>=10) + ($1>=11);
}
if (!$avx && `$ENV{CC} -v 2>&1` =~ /((?:^clang|LLVM) version|.*based on LLVM) ([3-9]\.[0-9]+)/) {
$avx = ($2>=3.0) + ($2>3.0);
}
open OUT,"| \"$^X\" $xlate $flavour $output";
*STDOUT=*OUT;
# input parameter block
($out,$inp,$len,$key,$counter)=("%rdi","%rsi","%rdx","%rcx","%r8");
$code.=<<___;
.text
.extern OPENSSL_ia32cap_P
.align 64
.Lzero:
.long 0,0,0,0
.Lone:
.long 1,0,0,0
.Linc:
.long 0,1,2,3
.Lfour:
.long 4,4,4,4
.Lincy:
.long 0,2,4,6,1,3,5,7
.Leight:
.long 8,8,8,8,8,8,8,8
.Lrot16:
.byte 0x2,0x3,0x0,0x1, 0x6,0x7,0x4,0x5, 0xa,0xb,0x8,0x9, 0xe,0xf,0xc,0xd
.Lrot24:
.byte 0x3,0x0,0x1,0x2, 0x7,0x4,0x5,0x6, 0xb,0x8,0x9,0xa, 0xf,0xc,0xd,0xe
.Lsigma:
.asciz "expand 32-byte k"
.asciz "ChaCha20 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
___
sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm
{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://;
my $arg = pop;
$arg = "\$$arg" if ($arg*1 eq $arg);
$code .= "\t$opcode\t".join(',',$arg,reverse @_)."\n";
}
@x=("%eax","%ebx","%ecx","%edx",map("%r${_}d",(8..11)),
"%nox","%nox","%nox","%nox",map("%r${_}d",(12..15)));
@t=("%esi","%edi");
sub ROUND { # critical path is 24 cycles per round
my ($a0,$b0,$c0,$d0)=@_;
my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
my ($xc,$xc_)=map("\"$_\"",@t);
my @x=map("\"$_\"",@x);
# Consider order in which variables are addressed by their
# index:
#
# a b c d
#
# 0 4 8 12 < even round
# 1 5 9 13
# 2 6 10 14
# 3 7 11 15
# 0 5 10 15 < odd round
# 1 6 11 12
# 2 7 8 13
# 3 4 9 14
#
# 'a', 'b' and 'd's are permanently allocated in registers,
# @x[0..7,12..15], while 'c's are maintained in memory. If
# you observe 'c' column, you'll notice that pair of 'c's is
# invariant between rounds. This means that we have to reload
# them once per round, in the middle. This is why you'll see
# bunch of 'c' stores and loads in the middle, but none in
# the beginning or end.
# Normally instructions would be interleaved to favour in-order
# execution. Generally out-of-order cores manage it gracefully,
# but not this time for some reason. As in-order execution
# cores are dying breed, old Atom is the only one around,
# instructions are left uninterleaved. Besides, Atom is better
# off executing 1xSSSE3 code anyway...
(
"&add (@x[$a0],@x[$b0])", # Q1
"&xor (@x[$d0],@x[$a0])",
"&rol (@x[$d0],16)",
"&add (@x[$a1],@x[$b1])", # Q2
"&xor (@x[$d1],@x[$a1])",
"&rol (@x[$d1],16)",
"&add ($xc,@x[$d0])",
"&xor (@x[$b0],$xc)",
"&rol (@x[$b0],12)",
"&add ($xc_,@x[$d1])",
"&xor (@x[$b1],$xc_)",
"&rol (@x[$b1],12)",
"&add (@x[$a0],@x[$b0])",
"&xor (@x[$d0],@x[$a0])",
"&rol (@x[$d0],8)",
"&add (@x[$a1],@x[$b1])",
"&xor (@x[$d1],@x[$a1])",
"&rol (@x[$d1],8)",
"&add ($xc,@x[$d0])",
"&xor (@x[$b0],$xc)",
"&rol (@x[$b0],7)",
"&add ($xc_,@x[$d1])",
"&xor (@x[$b1],$xc_)",
"&rol (@x[$b1],7)",
"&mov (\"4*$c0(%rsp)\",$xc)", # reload pair of 'c's
"&mov (\"4*$c1(%rsp)\",$xc_)",
"&mov ($xc,\"4*$c2(%rsp)\")",
"&mov ($xc_,\"4*$c3(%rsp)\")",
"&add (@x[$a2],@x[$b2])", # Q3
"&xor (@x[$d2],@x[$a2])",
"&rol (@x[$d2],16)",
"&add (@x[$a3],@x[$b3])", # Q4
"&xor (@x[$d3],@x[$a3])",
"&rol (@x[$d3],16)",
"&add ($xc,@x[$d2])",
"&xor (@x[$b2],$xc)",
"&rol (@x[$b2],12)",
"&add ($xc_,@x[$d3])",
"&xor (@x[$b3],$xc_)",
"&rol (@x[$b3],12)",
"&add (@x[$a2],@x[$b2])",
"&xor (@x[$d2],@x[$a2])",
"&rol (@x[$d2],8)",
"&add (@x[$a3],@x[$b3])",
"&xor (@x[$d3],@x[$a3])",
"&rol (@x[$d3],8)",
"&add ($xc,@x[$d2])",
"&xor (@x[$b2],$xc)",
"&rol (@x[$b2],7)",
"&add ($xc_,@x[$d3])",
"&xor (@x[$b3],$xc_)",
"&rol (@x[$b3],7)"
);
}
########################################################################
# Generic code path that handles all lengths on pre-SSSE3 processors.
$code.=<<___;
.globl ChaCha20_ctr32
.type ChaCha20_ctr32,\@function,5
.align 64
ChaCha20_ctr32:
cmp \$0,$len
je .Lno_data
mov OPENSSL_ia32cap_P+4(%rip),%r10
test \$`1<<(41-32)`,%r10d
jnz .LChaCha20_ssse3
push %rbx
push %rbp
push %r12
push %r13
push %r14
push %r15
sub \$64+24,%rsp
#movdqa .Lsigma(%rip),%xmm0
movdqu ($key),%xmm1
movdqu 16($key),%xmm2
movdqu ($counter),%xmm3
movdqa .Lone(%rip),%xmm4
#movdqa %xmm0,4*0(%rsp) # key[0]
movdqa %xmm1,4*4(%rsp) # key[1]
movdqa %xmm2,4*8(%rsp) # key[2]
movdqa %xmm3,4*12(%rsp) # key[3]
mov $len,%rbp # reassign $len
jmp .Loop_outer
.align 32
.Loop_outer:
mov \$0x61707865,@x[0] # 'expa'
mov \$0x3320646e,@x[1] # 'nd 3'
mov \$0x79622d32,@x[2] # '2-by'
mov \$0x6b206574,@x[3] # 'te k'
mov 4*4(%rsp),@x[4]
mov 4*5(%rsp),@x[5]
mov 4*6(%rsp),@x[6]
mov 4*7(%rsp),@x[7]
movd %xmm3,@x[12]
mov 4*13(%rsp),@x[13]
mov 4*14(%rsp),@x[14]
mov 4*15(%rsp),@x[15]
mov %rbp,64+0(%rsp) # save len
mov \$10,%ebp
mov $inp,64+8(%rsp) # save inp
movq %xmm2,%rsi # "@x[8]"
mov $out,64+16(%rsp) # save out
mov %rsi,%rdi
shr \$32,%rdi # "@x[9]"
jmp .Loop
.align 32
.Loop:
___
foreach (&ROUND (0, 4, 8,12)) { eval; }
foreach (&ROUND (0, 5,10,15)) { eval; }
&dec ("%ebp");
&jnz (".Loop");
$code.=<<___;
mov @t[1],4*9(%rsp) # modulo-scheduled
mov @t[0],4*8(%rsp)
mov 64(%rsp),%rbp # load len
movdqa %xmm2,%xmm1
mov 64+8(%rsp),$inp # load inp
paddd %xmm4,%xmm3 # increment counter
mov 64+16(%rsp),$out # load out
add \$0x61707865,@x[0] # 'expa'
add \$0x3320646e,@x[1] # 'nd 3'
add \$0x79622d32,@x[2] # '2-by'
add \$0x6b206574,@x[3] # 'te k'
add 4*4(%rsp),@x[4]
add 4*5(%rsp),@x[5]
add 4*6(%rsp),@x[6]
add 4*7(%rsp),@x[7]
add 4*12(%rsp),@x[12]
add 4*13(%rsp),@x[13]
add 4*14(%rsp),@x[14]
add 4*15(%rsp),@x[15]
paddd 4*8(%rsp),%xmm1
cmp \$64,%rbp
jb .Ltail
xor 4*0($inp),@x[0] # xor with input
xor 4*1($inp),@x[1]
xor 4*2($inp),@x[2]
xor 4*3($inp),@x[3]
xor 4*4($inp),@x[4]
xor 4*5($inp),@x[5]
xor 4*6($inp),@x[6]
xor 4*7($inp),@x[7]
movdqu 4*8($inp),%xmm0
xor 4*12($inp),@x[12]
xor 4*13($inp),@x[13]
xor 4*14($inp),@x[14]
xor 4*15($inp),@x[15]
lea 4*16($inp),$inp # inp+=64
pxor %xmm1,%xmm0
movdqa %xmm2,4*8(%rsp)
movd %xmm3,4*12(%rsp)
mov @x[0],4*0($out) # write output
mov @x[1],4*1($out)
mov @x[2],4*2($out)
mov @x[3],4*3($out)
mov @x[4],4*4($out)
mov @x[5],4*5($out)
mov @x[6],4*6($out)
mov @x[7],4*7($out)
movdqu %xmm0,4*8($out)
mov @x[12],4*12($out)
mov @x[13],4*13($out)
mov @x[14],4*14($out)
mov @x[15],4*15($out)
lea 4*16($out),$out # out+=64
sub \$64,%rbp
jnz .Loop_outer
jmp .Ldone
.align 16
.Ltail:
mov @x[0],4*0(%rsp)
mov @x[1],4*1(%rsp)
xor %rbx,%rbx
mov @x[2],4*2(%rsp)
mov @x[3],4*3(%rsp)
mov @x[4],4*4(%rsp)
mov @x[5],4*5(%rsp)
mov @x[6],4*6(%rsp)
mov @x[7],4*7(%rsp)
movdqa %xmm1,4*8(%rsp)
mov @x[12],4*12(%rsp)
mov @x[13],4*13(%rsp)
mov @x[14],4*14(%rsp)
mov @x[15],4*15(%rsp)
.Loop_tail:
movzb ($inp,%rbx),%eax
movzb (%rsp,%rbx),%edx
lea 1(%rbx),%rbx
xor %edx,%eax
mov %al,-1($out,%rbx)
dec %rbp
jnz .Loop_tail
.Ldone:
add \$64+24,%rsp
pop %r15
pop %r14
pop %r13
pop %r12
pop %rbp
pop %rbx
.Lno_data:
ret
.size ChaCha20_ctr32,.-ChaCha20_ctr32
___
########################################################################
# SSSE3 code path that handles shorter lengths
{
my ($a,$b,$c,$d,$t,$t1,$rot16,$rot24)=map("%xmm$_",(0..7));
sub SSSE3ROUND { # critical path is 20 "SIMD ticks" per round
&paddd ($a,$b);
&pxor ($d,$a);
&pshufb ($d,$rot16);
&paddd ($c,$d);
&pxor ($b,$c);
&movdqa ($t,$b);
&psrld ($b,20);
&pslld ($t,12);
&por ($b,$t);
&paddd ($a,$b);
&pxor ($d,$a);
&pshufb ($d,$rot24);
&paddd ($c,$d);
&pxor ($b,$c);
&movdqa ($t,$b);
&psrld ($b,25);
&pslld ($t,7);
&por ($b,$t);
}
my $xframe = $win64 ? 32+32+8 : 24;
$code.=<<___;
.type ChaCha20_ssse3,\@function,5
.align 32
ChaCha20_ssse3:
.LChaCha20_ssse3:
___
$code.=<<___ if ($avx);
test \$`1<<(43-32)`,%r10d
jnz .LChaCha20_4xop # XOP is fastest even if we use 1/4
___
$code.=<<___;
cmp \$128,$len # we might throw away some data,
ja .LChaCha20_4x # but overall it won't be slower
.Ldo_sse3_after_all:
push %rbx
push %rbp
push %r12
push %r13
push %r14
push %r15
sub \$64+$xframe,%rsp
___
$code.=<<___ if ($win64);
movaps %xmm6,64+32(%rsp)
movaps %xmm7,64+48(%rsp)
___
$code.=<<___;
movdqa .Lsigma(%rip),$a
movdqu ($key),$b
movdqu 16($key),$c
movdqu ($counter),$d
movdqa .Lrot16(%rip),$rot16
movdqa .Lrot24(%rip),$rot24
movdqa $a,0x00(%rsp)
movdqa $b,0x10(%rsp)
movdqa $c,0x20(%rsp)
movdqa $d,0x30(%rsp)
mov \$10,%ebp
jmp .Loop_ssse3
.align 32
.Loop_outer_ssse3:
movdqa .Lone(%rip),$d
movdqa 0x00(%rsp),$a
movdqa 0x10(%rsp),$b
movdqa 0x20(%rsp),$c
paddd 0x30(%rsp),$d
mov \$10,%ebp
movdqa $d,0x30(%rsp)
jmp .Loop_ssse3
.align 32
.Loop_ssse3:
___
&SSSE3ROUND();
&pshufd ($c,$c,0b01001110);
&pshufd ($b,$b,0b00111001);
&pshufd ($d,$d,0b10010011);
&nop ();
&SSSE3ROUND();
&pshufd ($c,$c,0b01001110);
&pshufd ($b,$b,0b10010011);
&pshufd ($d,$d,0b00111001);
&dec ("%ebp");
&jnz (".Loop_ssse3");
$code.=<<___;
paddd 0x00(%rsp),$a
paddd 0x10(%rsp),$b
paddd 0x20(%rsp),$c
paddd 0x30(%rsp),$d
cmp \$64,$len
jb .Ltail_ssse3
movdqu 0x00($inp),$t
movdqu 0x10($inp),$t1
pxor $t,$a # xor with input
movdqu 0x20($inp),$t
pxor $t1,$b
movdqu 0x30($inp),$t1
lea 0x40($inp),$inp # inp+=64
pxor $t,$c
pxor $t1,$d
movdqu $a,0x00($out) # write output
movdqu $b,0x10($out)
movdqu $c,0x20($out)
movdqu $d,0x30($out)
lea 0x40($out),$out # out+=64
sub \$64,$len
jnz .Loop_outer_ssse3
jmp .Ldone_ssse3
.align 16
.Ltail_ssse3:
movdqa $a,0x00(%rsp)
movdqa $b,0x10(%rsp)
movdqa $c,0x20(%rsp)
movdqa $d,0x30(%rsp)
xor %rbx,%rbx
.Loop_tail_ssse3:
movzb ($inp,%rbx),%eax
movzb (%rsp,%rbx),%ecx
lea 1(%rbx),%rbx
xor %ecx,%eax
mov %al,-1($out,%rbx)
dec $len
jnz .Loop_tail_ssse3
.Ldone_ssse3:
___
$code.=<<___ if ($win64);
movaps 64+32(%rsp),%xmm6
movaps 64+48(%rsp),%xmm7
___
$code.=<<___;
add \$64+$xframe,%rsp
pop %r15
pop %r14
pop %r13
pop %r12
pop %rbp
pop %rbx
ret
.size ChaCha20_ssse3,.-ChaCha20_ssse3
___
}
########################################################################
# SSSE3 code path that handles longer messages.
{
# assign variables to favor Atom front-end
my ($xd0,$xd1,$xd2,$xd3, $xt0,$xt1,$xt2,$xt3,
$xa0,$xa1,$xa2,$xa3, $xb0,$xb1,$xb2,$xb3)=map("%xmm$_",(0..15));
my @xx=($xa0,$xa1,$xa2,$xa3, $xb0,$xb1,$xb2,$xb3,
"%nox","%nox","%nox","%nox", $xd0,$xd1,$xd2,$xd3);
sub SSSE3_lane_ROUND {
my ($a0,$b0,$c0,$d0)=@_;
my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
my ($xc,$xc_,$t0,$t1)=map("\"$_\"",$xt0,$xt1,$xt2,$xt3);
my @x=map("\"$_\"",@xx);
# Consider order in which variables are addressed by their
# index:
#
# a b c d
#
# 0 4 8 12 < even round
# 1 5 9 13
# 2 6 10 14
# 3 7 11 15
# 0 5 10 15 < odd round
# 1 6 11 12
# 2 7 8 13
# 3 4 9 14
#
# 'a', 'b' and 'd's are permanently allocated in registers,
# @x[0..7,12..15], while 'c's are maintained in memory. If
# you observe 'c' column, you'll notice that pair of 'c's is
# invariant between rounds. This means that we have to reload
# them once per round, in the middle. This is why you'll see
# bunch of 'c' stores and loads in the middle, but none in
# the beginning or end.
(
"&paddd (@x[$a0],@x[$b0])", # Q1
"&paddd (@x[$a1],@x[$b1])", # Q2
"&pxor (@x[$d0],@x[$a0])",
"&pxor (@x[$d1],@x[$a1])",
"&pshufb (@x[$d0],$t1)",
"&pshufb (@x[$d1],$t1)",
"&paddd ($xc,@x[$d0])",
"&paddd ($xc_,@x[$d1])",
"&pxor (@x[$b0],$xc)",
"&pxor (@x[$b1],$xc_)",
"&movdqa ($t0,@x[$b0])",
"&pslld (@x[$b0],12)",
"&psrld ($t0,20)",
"&movdqa ($t1,@x[$b1])",
"&pslld (@x[$b1],12)",
"&por (@x[$b0],$t0)",
"&psrld ($t1,20)",
"&movdqa ($t0,'(%r11)')", # .Lrot24(%rip)
"&por (@x[$b1],$t1)",
"&paddd (@x[$a0],@x[$b0])",
"&paddd (@x[$a1],@x[$b1])",
"&pxor (@x[$d0],@x[$a0])",
"&pxor (@x[$d1],@x[$a1])",
"&pshufb (@x[$d0],$t0)",
"&pshufb (@x[$d1],$t0)",
"&paddd ($xc,@x[$d0])",
"&paddd ($xc_,@x[$d1])",
"&pxor (@x[$b0],$xc)",
"&pxor (@x[$b1],$xc_)",
"&movdqa ($t1,@x[$b0])",
"&pslld (@x[$b0],7)",
"&psrld ($t1,25)",
"&movdqa ($t0,@x[$b1])",
"&pslld (@x[$b1],7)",
"&por (@x[$b0],$t1)",
"&psrld ($t0,25)",
"&movdqa ($t1,'(%r10)')", # .Lrot16(%rip)
"&por (@x[$b1],$t0)",
"&movdqa (\"`16*($c0-8)`(%rsp)\",$xc)", # reload pair of 'c's
"&movdqa (\"`16*($c1-8)`(%rsp)\",$xc_)",
"&movdqa ($xc,\"`16*($c2-8)`(%rsp)\")",
"&movdqa ($xc_,\"`16*($c3-8)`(%rsp)\")",
"&paddd (@x[$a2],@x[$b2])", # Q3
"&paddd (@x[$a3],@x[$b3])", # Q4
"&pxor (@x[$d2],@x[$a2])",
"&pxor (@x[$d3],@x[$a3])",
"&pshufb (@x[$d2],$t1)",
"&pshufb (@x[$d3],$t1)",
"&paddd ($xc,@x[$d2])",
"&paddd ($xc_,@x[$d3])",
"&pxor (@x[$b2],$xc)",
"&pxor (@x[$b3],$xc_)",
"&movdqa ($t0,@x[$b2])",
"&pslld (@x[$b2],12)",
"&psrld ($t0,20)",
"&movdqa ($t1,@x[$b3])",
"&pslld (@x[$b3],12)",
"&por (@x[$b2],$t0)",
"&psrld ($t1,20)",
"&movdqa ($t0,'(%r11)')", # .Lrot24(%rip)
"&por (@x[$b3],$t1)",
"&paddd (@x[$a2],@x[$b2])",
"&paddd (@x[$a3],@x[$b3])",
"&pxor (@x[$d2],@x[$a2])",
"&pxor (@x[$d3],@x[$a3])",
"&pshufb (@x[$d2],$t0)",
"&pshufb (@x[$d3],$t0)",
"&paddd ($xc,@x[$d2])",
"&paddd ($xc_,@x[$d3])",
"&pxor (@x[$b2],$xc)",
"&pxor (@x[$b3],$xc_)",
"&movdqa ($t1,@x[$b2])",
"&pslld (@x[$b2],7)",
"&psrld ($t1,25)",
"&movdqa ($t0,@x[$b3])",
"&pslld (@x[$b3],7)",
"&por (@x[$b2],$t1)",
"&psrld ($t0,25)",
"&movdqa ($t1,'(%r10)')", # .Lrot16(%rip)
"&por (@x[$b3],$t0)"
);
}
my $xframe = $win64 ? 0xa0 : 0;
$code.=<<___;
.type ChaCha20_4x,\@function,5
.align 32
ChaCha20_4x:
.LChaCha20_4x:
mov %r10,%r11
___
$code.=<<___ if ($avx>1);
shr \$32,%r10 # OPENSSL_ia32cap_P+8
test \$`1<<5`,%r10 # test AVX2
jnz .LChaCha20_8x
___
$code.=<<___;
cmp \$192,$len
ja .Lproceed4x
and \$`1<<26|1<<22`,%r11 # isolate XSAVE+MOVBE
cmp \$`1<<22`,%r11 # check for MOVBE without XSAVE
je .Ldo_sse3_after_all # to detect Atom
.Lproceed4x:
lea -0x78(%rsp),%r11
sub \$0x148+$xframe,%rsp
___
################ stack layout
# +0x00 SIMD equivalent of @x[8-12]
# ...
# +0x40 constant copy of key[0-2] smashed by lanes
# ...
# +0x100 SIMD counters (with nonce smashed by lanes)
# ...
# +0x140
$code.=<<___ if ($win64);
movaps %xmm6,-0x30(%r11)
movaps %xmm7,-0x20(%r11)
movaps %xmm8,-0x10(%r11)
movaps %xmm9,0x00(%r11)
movaps %xmm10,0x10(%r11)
movaps %xmm11,0x20(%r11)
movaps %xmm12,0x30(%r11)
movaps %xmm13,0x40(%r11)
movaps %xmm14,0x50(%r11)
movaps %xmm15,0x60(%r11)
___
$code.=<<___;
movdqa .Lsigma(%rip),$xa3 # key[0]
movdqu ($key),$xb3 # key[1]
movdqu 16($key),$xt3 # key[2]
movdqu ($counter),$xd3 # key[3]
lea 0x100(%rsp),%rcx # size optimization
lea .Lrot16(%rip),%r10
lea .Lrot24(%rip),%r11
pshufd \$0x00,$xa3,$xa0 # smash key by lanes...
pshufd \$0x55,$xa3,$xa1
movdqa $xa0,0x40(%rsp) # ... and offload
pshufd \$0xaa,$xa3,$xa2
movdqa $xa1,0x50(%rsp)
pshufd \$0xff,$xa3,$xa3
movdqa $xa2,0x60(%rsp)
movdqa $xa3,0x70(%rsp)
pshufd \$0x00,$xb3,$xb0
pshufd \$0x55,$xb3,$xb1
movdqa $xb0,0x80-0x100(%rcx)
pshufd \$0xaa,$xb3,$xb2
movdqa $xb1,0x90-0x100(%rcx)
pshufd \$0xff,$xb3,$xb3
movdqa $xb2,0xa0-0x100(%rcx)
movdqa $xb3,0xb0-0x100(%rcx)
pshufd \$0x00,$xt3,$xt0 # "$xc0"
pshufd \$0x55,$xt3,$xt1 # "$xc1"
movdqa $xt0,0xc0-0x100(%rcx)
pshufd \$0xaa,$xt3,$xt2 # "$xc2"
movdqa $xt1,0xd0-0x100(%rcx)
pshufd \$0xff,$xt3,$xt3 # "$xc3"
movdqa $xt2,0xe0-0x100(%rcx)
movdqa $xt3,0xf0-0x100(%rcx)
pshufd \$0x00,$xd3,$xd0
pshufd \$0x55,$xd3,$xd1
paddd .Linc(%rip),$xd0 # don't save counters yet
pshufd \$0xaa,$xd3,$xd2
movdqa $xd1,0x110-0x100(%rcx)
pshufd \$0xff,$xd3,$xd3
movdqa $xd2,0x120-0x100(%rcx)
movdqa $xd3,0x130-0x100(%rcx)
jmp .Loop_enter4x
.align 32
.Loop_outer4x:
movdqa 0x40(%rsp),$xa0 # re-load smashed key
movdqa 0x50(%rsp),$xa1
movdqa 0x60(%rsp),$xa2
movdqa 0x70(%rsp),$xa3
movdqa 0x80-0x100(%rcx),$xb0
movdqa 0x90-0x100(%rcx),$xb1
movdqa 0xa0-0x100(%rcx),$xb2
movdqa 0xb0-0x100(%rcx),$xb3
movdqa 0xc0-0x100(%rcx),$xt0 # "$xc0"
movdqa 0xd0-0x100(%rcx),$xt1 # "$xc1"
movdqa 0xe0-0x100(%rcx),$xt2 # "$xc2"
movdqa 0xf0-0x100(%rcx),$xt3 # "$xc3"
movdqa 0x100-0x100(%rcx),$xd0
movdqa 0x110-0x100(%rcx),$xd1
movdqa 0x120-0x100(%rcx),$xd2
movdqa 0x130-0x100(%rcx),$xd3
paddd .Lfour(%rip),$xd0 # next SIMD counters
.Loop_enter4x:
movdqa $xt2,0x20(%rsp) # SIMD equivalent of "@x[10]"
movdqa $xt3,0x30(%rsp) # SIMD equivalent of "@x[11]"
movdqa (%r10),$xt3 # .Lrot16(%rip)
mov \$10,%eax
movdqa $xd0,0x100-0x100(%rcx) # save SIMD counters
jmp .Loop4x
.align 32
.Loop4x:
___
foreach (&SSSE3_lane_ROUND(0, 4, 8,12)) { eval; }
foreach (&SSSE3_lane_ROUND(0, 5,10,15)) { eval; }
$code.=<<___;
dec %eax
jnz .Loop4x
paddd 0x40(%rsp),$xa0 # accumulate key material
paddd 0x50(%rsp),$xa1
paddd 0x60(%rsp),$xa2
paddd 0x70(%rsp),$xa3
movdqa $xa0,$xt2 # "de-interlace" data
punpckldq $xa1,$xa0
movdqa $xa2,$xt3
punpckldq $xa3,$xa2
punpckhdq $xa1,$xt2
punpckhdq $xa3,$xt3
movdqa $xa0,$xa1
punpcklqdq $xa2,$xa0 # "a0"
movdqa $xt2,$xa3
punpcklqdq $xt3,$xt2 # "a2"
punpckhqdq $xa2,$xa1 # "a1"
punpckhqdq $xt3,$xa3 # "a3"
___
($xa2,$xt2)=($xt2,$xa2);
$code.=<<___;
paddd 0x80-0x100(%rcx),$xb0
paddd 0x90-0x100(%rcx),$xb1
paddd 0xa0-0x100(%rcx),$xb2
paddd 0xb0-0x100(%rcx),$xb3
movdqa $xa0,0x00(%rsp) # offload $xaN
movdqa $xa1,0x10(%rsp)
movdqa 0x20(%rsp),$xa0 # "xc2"
movdqa 0x30(%rsp),$xa1 # "xc3"
movdqa $xb0,$xt2
punpckldq $xb1,$xb0
movdqa $xb2,$xt3
punpckldq $xb3,$xb2
punpckhdq $xb1,$xt2
punpckhdq $xb3,$xt3
movdqa $xb0,$xb1
punpcklqdq $xb2,$xb0 # "b0"
movdqa $xt2,$xb3
punpcklqdq $xt3,$xt2 # "b2"
punpckhqdq $xb2,$xb1 # "b1"
punpckhqdq $xt3,$xb3 # "b3"
___
($xb2,$xt2)=($xt2,$xb2);
my ($xc0,$xc1,$xc2,$xc3)=($xt0,$xt1,$xa0,$xa1);
$code.=<<___;
paddd 0xc0-0x100(%rcx),$xc0
paddd 0xd0-0x100(%rcx),$xc1
paddd 0xe0-0x100(%rcx),$xc2
paddd 0xf0-0x100(%rcx),$xc3
movdqa $xa2,0x20(%rsp) # keep offloading $xaN
movdqa $xa3,0x30(%rsp)
movdqa $xc0,$xt2
punpckldq $xc1,$xc0
movdqa $xc2,$xt3
punpckldq $xc3,$xc2
punpckhdq $xc1,$xt2
punpckhdq $xc3,$xt3
movdqa $xc0,$xc1
punpcklqdq $xc2,$xc0 # "c0"
movdqa $xt2,$xc3
punpcklqdq $xt3,$xt2 # "c2"
punpckhqdq $xc2,$xc1 # "c1"
punpckhqdq $xt3,$xc3 # "c3"
___
($xc2,$xt2)=($xt2,$xc2);
($xt0,$xt1)=($xa2,$xa3); # use $xaN as temporary
$code.=<<___;
paddd 0x100-0x100(%rcx),$xd0
paddd 0x110-0x100(%rcx),$xd1
paddd 0x120-0x100(%rcx),$xd2
paddd 0x130-0x100(%rcx),$xd3
movdqa $xd0,$xt2
punpckldq $xd1,$xd0
movdqa $xd2,$xt3
punpckldq $xd3,$xd2
punpckhdq $xd1,$xt2
punpckhdq $xd3,$xt3
movdqa $xd0,$xd1
punpcklqdq $xd2,$xd0 # "d0"
movdqa $xt2,$xd3
punpcklqdq $xt3,$xt2 # "d2"
punpckhqdq $xd2,$xd1 # "d1"
punpckhqdq $xt3,$xd3 # "d3"
___
($xd2,$xt2)=($xt2,$xd2);
$code.=<<___;
cmp \$64*4,$len
jb .Ltail4x
movdqu 0x00($inp),$xt0 # xor with input
movdqu 0x10($inp),$xt1
movdqu 0x20($inp),$xt2
movdqu 0x30($inp),$xt3
pxor 0x00(%rsp),$xt0 # $xaN is offloaded, remember?
pxor $xb0,$xt1
pxor $xc0,$xt2
pxor $xd0,$xt3
movdqu $xt0,0x00($out)
movdqu 0x40($inp),$xt0
movdqu $xt1,0x10($out)
movdqu 0x50($inp),$xt1
movdqu $xt2,0x20($out)
movdqu 0x60($inp),$xt2
movdqu $xt3,0x30($out)
movdqu 0x70($inp),$xt3
lea 0x80($inp),$inp # size optimization
pxor 0x10(%rsp),$xt0
pxor $xb1,$xt1
pxor $xc1,$xt2
pxor $xd1,$xt3
movdqu $xt0,0x40($out)
movdqu 0x00($inp),$xt0
movdqu $xt1,0x50($out)
movdqu 0x10($inp),$xt1
movdqu $xt2,0x60($out)
movdqu 0x20($inp),$xt2
movdqu $xt3,0x70($out)
lea 0x80($out),$out # size optimization
movdqu 0x30($inp),$xt3
pxor 0x20(%rsp),$xt0
pxor $xb2,$xt1
pxor $xc2,$xt2
pxor $xd2,$xt3
movdqu $xt0,0x00($out)
movdqu 0x40($inp),$xt0
movdqu $xt1,0x10($out)
movdqu 0x50($inp),$xt1
movdqu $xt2,0x20($out)
movdqu 0x60($inp),$xt2
movdqu $xt3,0x30($out)
movdqu 0x70($inp),$xt3
lea 0x80($inp),$inp # inp+=64*4
pxor 0x30(%rsp),$xt0
pxor $xb3,$xt1
pxor $xc3,$xt2
pxor $xd3,$xt3
movdqu $xt0,0x40($out)
movdqu $xt1,0x50($out)
movdqu $xt2,0x60($out)
movdqu $xt3,0x70($out)
lea 0x80($out),$out # out+=64*4
sub \$64*4,$len
jnz .Loop_outer4x
jmp .Ldone4x
.Ltail4x:
cmp \$192,$len
jae .L192_or_more4x
cmp \$128,$len
jae .L128_or_more4x
cmp \$64,$len
jae .L64_or_more4x
#movdqa 0x00(%rsp),$xt0 # $xaN is offloaded, remember?
xor %r10,%r10
#movdqa $xt0,0x00(%rsp)
movdqa $xb0,0x10(%rsp)
movdqa $xc0,0x20(%rsp)
movdqa $xd0,0x30(%rsp)
jmp .Loop_tail4x
.align 32
.L64_or_more4x:
movdqu 0x00($inp),$xt0 # xor with input
movdqu 0x10($inp),$xt1
movdqu 0x20($inp),$xt2
movdqu 0x30($inp),$xt3
pxor 0x00(%rsp),$xt0 # $xaxN is offloaded, remember?
pxor $xb0,$xt1
pxor $xc0,$xt2
pxor $xd0,$xt3
movdqu $xt0,0x00($out)
movdqu $xt1,0x10($out)
movdqu $xt2,0x20($out)
movdqu $xt3,0x30($out)
je .Ldone4x
movdqa 0x10(%rsp),$xt0 # $xaN is offloaded, remember?
lea 0x40($inp),$inp # inp+=64*1
xor %r10,%r10
movdqa $xt0,0x00(%rsp)
movdqa $xb1,0x10(%rsp)
lea 0x40($out),$out # out+=64*1
movdqa $xc1,0x20(%rsp)
sub \$64,$len # len-=64*1
movdqa $xd1,0x30(%rsp)
jmp .Loop_tail4x
.align 32
.L128_or_more4x:
movdqu 0x00($inp),$xt0 # xor with input
movdqu 0x10($inp),$xt1
movdqu 0x20($inp),$xt2
movdqu 0x30($inp),$xt3
pxor 0x00(%rsp),$xt0 # $xaN is offloaded, remember?
pxor $xb0,$xt1
pxor $xc0,$xt2
pxor $xd0,$xt3
movdqu $xt0,0x00($out)
movdqu 0x40($inp),$xt0
movdqu $xt1,0x10($out)
movdqu 0x50($inp),$xt1
movdqu $xt2,0x20($out)
movdqu 0x60($inp),$xt2
movdqu $xt3,0x30($out)
movdqu 0x70($inp),$xt3
pxor 0x10(%rsp),$xt0
pxor $xb1,$xt1
pxor $xc1,$xt2
pxor $xd1,$xt3
movdqu $xt0,0x40($out)
movdqu $xt1,0x50($out)
movdqu $xt2,0x60($out)
movdqu $xt3,0x70($out)
je .Ldone4x
movdqa 0x20(%rsp),$xt0 # $xaN is offloaded, remember?
lea 0x80($inp),$inp # inp+=64*2
xor %r10,%r10
movdqa $xt0,0x00(%rsp)
movdqa $xb2,0x10(%rsp)
lea 0x80($out),$out # out+=64*2
movdqa $xc2,0x20(%rsp)
sub \$128,$len # len-=64*2
movdqa $xd2,0x30(%rsp)
jmp .Loop_tail4x
.align 32
.L192_or_more4x:
movdqu 0x00($inp),$xt0 # xor with input
movdqu 0x10($inp),$xt1
movdqu 0x20($inp),$xt2
movdqu 0x30($inp),$xt3
pxor 0x00(%rsp),$xt0 # $xaN is offloaded, remember?
pxor $xb0,$xt1
pxor $xc0,$xt2
pxor $xd0,$xt3
movdqu $xt0,0x00($out)
movdqu 0x40($inp),$xt0
movdqu $xt1,0x10($out)
movdqu 0x50($inp),$xt1
movdqu $xt2,0x20($out)
movdqu 0x60($inp),$xt2
movdqu $xt3,0x30($out)
movdqu 0x70($inp),$xt3
lea 0x80($inp),$inp # size optimization
pxor 0x10(%rsp),$xt0
pxor $xb1,$xt1
pxor $xc1,$xt2
pxor $xd1,$xt3
movdqu $xt0,0x40($out)
movdqu 0x00($inp),$xt0
movdqu $xt1,0x50($out)
movdqu 0x10($inp),$xt1
movdqu $xt2,0x60($out)
movdqu 0x20($inp),$xt2
movdqu $xt3,0x70($out)
lea 0x80($out),$out # size optimization
movdqu 0x30($inp),$xt3
pxor 0x20(%rsp),$xt0
pxor $xb2,$xt1
pxor $xc2,$xt2
pxor $xd2,$xt3
movdqu $xt0,0x00($out)
movdqu $xt1,0x10($out)
movdqu $xt2,0x20($out)
movdqu $xt3,0x30($out)
je .Ldone4x
movdqa 0x30(%rsp),$xt0 # $xaN is offloaded, remember?
lea 0x40($inp),$inp # inp+=64*3
xor %r10,%r10
movdqa $xt0,0x00(%rsp)
movdqa $xb3,0x10(%rsp)
lea 0x40($out),$out # out+=64*3
movdqa $xc3,0x20(%rsp)
sub \$192,$len # len-=64*3
movdqa $xd3,0x30(%rsp)
.Loop_tail4x:
movzb ($inp,%r10),%eax
movzb (%rsp,%r10),%ecx
lea 1(%r10),%r10
xor %ecx,%eax
mov %al,-1($out,%r10)
dec $len
jnz .Loop_tail4x
.Ldone4x:
___
$code.=<<___ if ($win64);
lea 0x140+0x30(%rsp),%r11
movaps -0x30(%r11),%xmm6
movaps -0x20(%r11),%xmm7
movaps -0x10(%r11),%xmm8
movaps 0x00(%r11),%xmm9
movaps 0x10(%r11),%xmm10
movaps 0x20(%r11),%xmm11
movaps 0x30(%r11),%xmm12
movaps 0x40(%r11),%xmm13
movaps 0x50(%r11),%xmm14
movaps 0x60(%r11),%xmm15
___
$code.=<<___;
add \$0x148+$xframe,%rsp
ret
.size ChaCha20_4x,.-ChaCha20_4x
___
}
########################################################################
# XOP code path that handles all lengths.
if ($avx) {
# There is some "anomaly" observed depending on instructions' size or
# alignment. If you look closely at below code you'll notice that
# sometimes argument order varies. The order affects instruction
# encoding by making it larger, and such fiddling gives 5% performance
# improvement. This is on FX-4100...
my ($xb0,$xb1,$xb2,$xb3, $xd0,$xd1,$xd2,$xd3,
$xa0,$xa1,$xa2,$xa3, $xt0,$xt1,$xt2,$xt3)=map("%xmm$_",(0..15));
my @xx=($xa0,$xa1,$xa2,$xa3, $xb0,$xb1,$xb2,$xb3,
$xt0,$xt1,$xt2,$xt3, $xd0,$xd1,$xd2,$xd3);
sub XOP_lane_ROUND {
my ($a0,$b0,$c0,$d0)=@_;
my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
my @x=map("\"$_\"",@xx);
(
"&vpaddd (@x[$a0],@x[$a0],@x[$b0])", # Q1
"&vpaddd (@x[$a1],@x[$a1],@x[$b1])", # Q2
"&vpaddd (@x[$a2],@x[$a2],@x[$b2])", # Q3
"&vpaddd (@x[$a3],@x[$a3],@x[$b3])", # Q4
"&vpxor (@x[$d0],@x[$a0],@x[$d0])",
"&vpxor (@x[$d1],@x[$a1],@x[$d1])",
"&vpxor (@x[$d2],@x[$a2],@x[$d2])",
"&vpxor (@x[$d3],@x[$a3],@x[$d3])",
"&vprotd (@x[$d0],@x[$d0],16)",
"&vprotd (@x[$d1],@x[$d1],16)",
"&vprotd (@x[$d2],@x[$d2],16)",
"&vprotd (@x[$d3],@x[$d3],16)",
"&vpaddd (@x[$c0],@x[$c0],@x[$d0])",
"&vpaddd (@x[$c1],@x[$c1],@x[$d1])",
"&vpaddd (@x[$c2],@x[$c2],@x[$d2])",
"&vpaddd (@x[$c3],@x[$c3],@x[$d3])",
"&vpxor (@x[$b0],@x[$c0],@x[$b0])",
"&vpxor (@x[$b1],@x[$c1],@x[$b1])",
"&vpxor (@x[$b2],@x[$b2],@x[$c2])", # flip
"&vpxor (@x[$b3],@x[$b3],@x[$c3])", # flip
"&vprotd (@x[$b0],@x[$b0],12)",
"&vprotd (@x[$b1],@x[$b1],12)",
"&vprotd (@x[$b2],@x[$b2],12)",
"&vprotd (@x[$b3],@x[$b3],12)",
"&vpaddd (@x[$a0],@x[$b0],@x[$a0])", # flip
"&vpaddd (@x[$a1],@x[$b1],@x[$a1])", # flip
"&vpaddd (@x[$a2],@x[$a2],@x[$b2])",
"&vpaddd (@x[$a3],@x[$a3],@x[$b3])",
"&vpxor (@x[$d0],@x[$a0],@x[$d0])",
"&vpxor (@x[$d1],@x[$a1],@x[$d1])",
"&vpxor (@x[$d2],@x[$a2],@x[$d2])",
"&vpxor (@x[$d3],@x[$a3],@x[$d3])",
"&vprotd (@x[$d0],@x[$d0],8)",
"&vprotd (@x[$d1],@x[$d1],8)",
"&vprotd (@x[$d2],@x[$d2],8)",
"&vprotd (@x[$d3],@x[$d3],8)",
"&vpaddd (@x[$c0],@x[$c0],@x[$d0])",
"&vpaddd (@x[$c1],@x[$c1],@x[$d1])",
"&vpaddd (@x[$c2],@x[$c2],@x[$d2])",
"&vpaddd (@x[$c3],@x[$c3],@x[$d3])",
"&vpxor (@x[$b0],@x[$c0],@x[$b0])",
"&vpxor (@x[$b1],@x[$c1],@x[$b1])",
"&vpxor (@x[$b2],@x[$b2],@x[$c2])", # flip
"&vpxor (@x[$b3],@x[$b3],@x[$c3])", # flip
"&vprotd (@x[$b0],@x[$b0],7)",
"&vprotd (@x[$b1],@x[$b1],7)",
"&vprotd (@x[$b2],@x[$b2],7)",
"&vprotd (@x[$b3],@x[$b3],7)"
);
}
my $xframe = $win64 ? 0xa0 : 0;
$code.=<<___;
.type ChaCha20_4xop,\@function,5
.align 32
ChaCha20_4xop:
.LChaCha20_4xop:
lea -0x78(%rsp),%r11
sub \$0x148+$xframe,%rsp
___
################ stack layout
# +0x00 SIMD equivalent of @x[8-12]
# ...
# +0x40 constant copy of key[0-2] smashed by lanes
# ...
# +0x100 SIMD counters (with nonce smashed by lanes)
# ...
# +0x140
$code.=<<___ if ($win64);
movaps %xmm6,-0x30(%r11)
movaps %xmm7,-0x20(%r11)
movaps %xmm8,-0x10(%r11)
movaps %xmm9,0x00(%r11)
movaps %xmm10,0x10(%r11)
movaps %xmm11,0x20(%r11)
movaps %xmm12,0x30(%r11)
movaps %xmm13,0x40(%r11)
movaps %xmm14,0x50(%r11)
movaps %xmm15,0x60(%r11)
___
$code.=<<___;
vzeroupper
vmovdqa .Lsigma(%rip),$xa3 # key[0]
vmovdqu ($key),$xb3 # key[1]
vmovdqu 16($key),$xt3 # key[2]
vmovdqu ($counter),$xd3 # key[3]
lea 0x100(%rsp),%rcx # size optimization
vpshufd \$0x00,$xa3,$xa0 # smash key by lanes...
vpshufd \$0x55,$xa3,$xa1
vmovdqa $xa0,0x40(%rsp) # ... and offload
vpshufd \$0xaa,$xa3,$xa2
vmovdqa $xa1,0x50(%rsp)
vpshufd \$0xff,$xa3,$xa3
vmovdqa $xa2,0x60(%rsp)
vmovdqa $xa3,0x70(%rsp)
vpshufd \$0x00,$xb3,$xb0
vpshufd \$0x55,$xb3,$xb1
vmovdqa $xb0,0x80-0x100(%rcx)
vpshufd \$0xaa,$xb3,$xb2
vmovdqa $xb1,0x90-0x100(%rcx)
vpshufd \$0xff,$xb3,$xb3
vmovdqa $xb2,0xa0-0x100(%rcx)
vmovdqa $xb3,0xb0-0x100(%rcx)
vpshufd \$0x00,$xt3,$xt0 # "$xc0"
vpshufd \$0x55,$xt3,$xt1 # "$xc1"
vmovdqa $xt0,0xc0-0x100(%rcx)
vpshufd \$0xaa,$xt3,$xt2 # "$xc2"
vmovdqa $xt1,0xd0-0x100(%rcx)
vpshufd \$0xff,$xt3,$xt3 # "$xc3"
vmovdqa $xt2,0xe0-0x100(%rcx)
vmovdqa $xt3,0xf0-0x100(%rcx)
vpshufd \$0x00,$xd3,$xd0
vpshufd \$0x55,$xd3,$xd1
vpaddd .Linc(%rip),$xd0,$xd0 # don't save counters yet
vpshufd \$0xaa,$xd3,$xd2
vmovdqa $xd1,0x110-0x100(%rcx)
vpshufd \$0xff,$xd3,$xd3
vmovdqa $xd2,0x120-0x100(%rcx)
vmovdqa $xd3,0x130-0x100(%rcx)
jmp .Loop_enter4xop
.align 32
.Loop_outer4xop:
vmovdqa 0x40(%rsp),$xa0 # re-load smashed key
vmovdqa 0x50(%rsp),$xa1
vmovdqa 0x60(%rsp),$xa2
vmovdqa 0x70(%rsp),$xa3
vmovdqa 0x80-0x100(%rcx),$xb0
vmovdqa 0x90-0x100(%rcx),$xb1
vmovdqa 0xa0-0x100(%rcx),$xb2
vmovdqa 0xb0-0x100(%rcx),$xb3
vmovdqa 0xc0-0x100(%rcx),$xt0 # "$xc0"
vmovdqa 0xd0-0x100(%rcx),$xt1 # "$xc1"
vmovdqa 0xe0-0x100(%rcx),$xt2 # "$xc2"
vmovdqa 0xf0-0x100(%rcx),$xt3 # "$xc3"
vmovdqa 0x100-0x100(%rcx),$xd0
vmovdqa 0x110-0x100(%rcx),$xd1
vmovdqa 0x120-0x100(%rcx),$xd2
vmovdqa 0x130-0x100(%rcx),$xd3
vpaddd .Lfour(%rip),$xd0,$xd0 # next SIMD counters
.Loop_enter4xop:
mov \$10,%eax
vmovdqa $xd0,0x100-0x100(%rcx) # save SIMD counters
jmp .Loop4xop
.align 32
.Loop4xop:
___
foreach (&XOP_lane_ROUND(0, 4, 8,12)) { eval; }
foreach (&XOP_lane_ROUND(0, 5,10,15)) { eval; }
$code.=<<___;
dec %eax
jnz .Loop4xop
vpaddd 0x40(%rsp),$xa0,$xa0 # accumulate key material
vpaddd 0x50(%rsp),$xa1,$xa1
vpaddd 0x60(%rsp),$xa2,$xa2
vpaddd 0x70(%rsp),$xa3,$xa3
vmovdqa $xt2,0x20(%rsp) # offload $xc2,3
vmovdqa $xt3,0x30(%rsp)
vpunpckldq $xa1,$xa0,$xt2 # "de-interlace" data
vpunpckldq $xa3,$xa2,$xt3
vpunpckhdq $xa1,$xa0,$xa0
vpunpckhdq $xa3,$xa2,$xa2
vpunpcklqdq $xt3,$xt2,$xa1 # "a0"
vpunpckhqdq $xt3,$xt2,$xt2 # "a1"
vpunpcklqdq $xa2,$xa0,$xa3 # "a2"
vpunpckhqdq $xa2,$xa0,$xa0 # "a3"
___
($xa0,$xa1,$xa2,$xa3,$xt2)=($xa1,$xt2,$xa3,$xa0,$xa2);
$code.=<<___;
vpaddd 0x80-0x100(%rcx),$xb0,$xb0
vpaddd 0x90-0x100(%rcx),$xb1,$xb1
vpaddd 0xa0-0x100(%rcx),$xb2,$xb2
vpaddd 0xb0-0x100(%rcx),$xb3,$xb3
vmovdqa $xa0,0x00(%rsp) # offload $xa0,1
vmovdqa $xa1,0x10(%rsp)
vmovdqa 0x20(%rsp),$xa0 # "xc2"
vmovdqa 0x30(%rsp),$xa1 # "xc3"
vpunpckldq $xb1,$xb0,$xt2
vpunpckldq $xb3,$xb2,$xt3
vpunpckhdq $xb1,$xb0,$xb0
vpunpckhdq $xb3,$xb2,$xb2
vpunpcklqdq $xt3,$xt2,$xb1 # "b0"
vpunpckhqdq $xt3,$xt2,$xt2 # "b1"
vpunpcklqdq $xb2,$xb0,$xb3 # "b2"
vpunpckhqdq $xb2,$xb0,$xb0 # "b3"
___
($xb0,$xb1,$xb2,$xb3,$xt2)=($xb1,$xt2,$xb3,$xb0,$xb2);
my ($xc0,$xc1,$xc2,$xc3)=($xt0,$xt1,$xa0,$xa1);
$code.=<<___;
vpaddd 0xc0-0x100(%rcx),$xc0,$xc0
vpaddd 0xd0-0x100(%rcx),$xc1,$xc1
vpaddd 0xe0-0x100(%rcx),$xc2,$xc2
vpaddd 0xf0-0x100(%rcx),$xc3,$xc3
vpunpckldq $xc1,$xc0,$xt2
vpunpckldq $xc3,$xc2,$xt3
vpunpckhdq $xc1,$xc0,$xc0
vpunpckhdq $xc3,$xc2,$xc2
vpunpcklqdq $xt3,$xt2,$xc1 # "c0"
vpunpckhqdq $xt3,$xt2,$xt2 # "c1"
vpunpcklqdq $xc2,$xc0,$xc3 # "c2"
vpunpckhqdq $xc2,$xc0,$xc0 # "c3"
___
($xc0,$xc1,$xc2,$xc3,$xt2)=($xc1,$xt2,$xc3,$xc0,$xc2);
$code.=<<___;
vpaddd 0x100-0x100(%rcx),$xd0,$xd0
vpaddd 0x110-0x100(%rcx),$xd1,$xd1
vpaddd 0x120-0x100(%rcx),$xd2,$xd2
vpaddd 0x130-0x100(%rcx),$xd3,$xd3
vpunpckldq $xd1,$xd0,$xt2
vpunpckldq $xd3,$xd2,$xt3
vpunpckhdq $xd1,$xd0,$xd0
vpunpckhdq $xd3,$xd2,$xd2
vpunpcklqdq $xt3,$xt2,$xd1 # "d0"
vpunpckhqdq $xt3,$xt2,$xt2 # "d1"
vpunpcklqdq $xd2,$xd0,$xd3 # "d2"
vpunpckhqdq $xd2,$xd0,$xd0 # "d3"
___
($xd0,$xd1,$xd2,$xd3,$xt2)=($xd1,$xt2,$xd3,$xd0,$xd2);
($xa0,$xa1)=($xt2,$xt3);
$code.=<<___;
vmovdqa 0x00(%rsp),$xa0 # restore $xa0,1
vmovdqa 0x10(%rsp),$xa1
cmp \$64*4,$len
jb .Ltail4xop
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x10($inp),$xb0,$xb0
vpxor 0x20($inp),$xc0,$xc0
vpxor 0x30($inp),$xd0,$xd0
vpxor 0x40($inp),$xa1,$xa1
vpxor 0x50($inp),$xb1,$xb1
vpxor 0x60($inp),$xc1,$xc1
vpxor 0x70($inp),$xd1,$xd1
lea 0x80($inp),$inp # size optimization
vpxor 0x00($inp),$xa2,$xa2
vpxor 0x10($inp),$xb2,$xb2
vpxor 0x20($inp),$xc2,$xc2
vpxor 0x30($inp),$xd2,$xd2
vpxor 0x40($inp),$xa3,$xa3
vpxor 0x50($inp),$xb3,$xb3
vpxor 0x60($inp),$xc3,$xc3
vpxor 0x70($inp),$xd3,$xd3
lea 0x80($inp),$inp # inp+=64*4
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x10($out)
vmovdqu $xc0,0x20($out)
vmovdqu $xd0,0x30($out)
vmovdqu $xa1,0x40($out)
vmovdqu $xb1,0x50($out)
vmovdqu $xc1,0x60($out)
vmovdqu $xd1,0x70($out)
lea 0x80($out),$out # size optimization
vmovdqu $xa2,0x00($out)
vmovdqu $xb2,0x10($out)
vmovdqu $xc2,0x20($out)
vmovdqu $xd2,0x30($out)
vmovdqu $xa3,0x40($out)
vmovdqu $xb3,0x50($out)
vmovdqu $xc3,0x60($out)
vmovdqu $xd3,0x70($out)
lea 0x80($out),$out # out+=64*4
sub \$64*4,$len
jnz .Loop_outer4xop
jmp .Ldone4xop
.align 32
.Ltail4xop:
cmp \$192,$len
jae .L192_or_more4xop
cmp \$128,$len
jae .L128_or_more4xop
cmp \$64,$len
jae .L64_or_more4xop
xor %r10,%r10
vmovdqa $xa0,0x00(%rsp)
vmovdqa $xb0,0x10(%rsp)
vmovdqa $xc0,0x20(%rsp)
vmovdqa $xd0,0x30(%rsp)
jmp .Loop_tail4xop
.align 32
.L64_or_more4xop:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x10($inp),$xb0,$xb0
vpxor 0x20($inp),$xc0,$xc0
vpxor 0x30($inp),$xd0,$xd0
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x10($out)
vmovdqu $xc0,0x20($out)
vmovdqu $xd0,0x30($out)
je .Ldone4xop
lea 0x40($inp),$inp # inp+=64*1
vmovdqa $xa1,0x00(%rsp)
xor %r10,%r10
vmovdqa $xb1,0x10(%rsp)
lea 0x40($out),$out # out+=64*1
vmovdqa $xc1,0x20(%rsp)
sub \$64,$len # len-=64*1
vmovdqa $xd1,0x30(%rsp)
jmp .Loop_tail4xop
.align 32
.L128_or_more4xop:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x10($inp),$xb0,$xb0
vpxor 0x20($inp),$xc0,$xc0
vpxor 0x30($inp),$xd0,$xd0
vpxor 0x40($inp),$xa1,$xa1
vpxor 0x50($inp),$xb1,$xb1
vpxor 0x60($inp),$xc1,$xc1
vpxor 0x70($inp),$xd1,$xd1
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x10($out)
vmovdqu $xc0,0x20($out)
vmovdqu $xd0,0x30($out)
vmovdqu $xa1,0x40($out)
vmovdqu $xb1,0x50($out)
vmovdqu $xc1,0x60($out)
vmovdqu $xd1,0x70($out)
je .Ldone4xop
lea 0x80($inp),$inp # inp+=64*2
vmovdqa $xa2,0x00(%rsp)
xor %r10,%r10
vmovdqa $xb2,0x10(%rsp)
lea 0x80($out),$out # out+=64*2
vmovdqa $xc2,0x20(%rsp)
sub \$128,$len # len-=64*2
vmovdqa $xd2,0x30(%rsp)
jmp .Loop_tail4xop
.align 32
.L192_or_more4xop:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x10($inp),$xb0,$xb0
vpxor 0x20($inp),$xc0,$xc0
vpxor 0x30($inp),$xd0,$xd0
vpxor 0x40($inp),$xa1,$xa1
vpxor 0x50($inp),$xb1,$xb1
vpxor 0x60($inp),$xc1,$xc1
vpxor 0x70($inp),$xd1,$xd1
lea 0x80($inp),$inp # size optimization
vpxor 0x00($inp),$xa2,$xa2
vpxor 0x10($inp),$xb2,$xb2
vpxor 0x20($inp),$xc2,$xc2
vpxor 0x30($inp),$xd2,$xd2
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x10($out)
vmovdqu $xc0,0x20($out)
vmovdqu $xd0,0x30($out)
vmovdqu $xa1,0x40($out)
vmovdqu $xb1,0x50($out)
vmovdqu $xc1,0x60($out)
vmovdqu $xd1,0x70($out)
lea 0x80($out),$out # size optimization
vmovdqu $xa2,0x00($out)
vmovdqu $xb2,0x10($out)
vmovdqu $xc2,0x20($out)
vmovdqu $xd2,0x30($out)
je .Ldone4xop
lea 0x40($inp),$inp # inp+=64*3
vmovdqa $xa2,0x00(%rsp)
xor %r10,%r10
vmovdqa $xb2,0x10(%rsp)
lea 0x40($out),$out # out+=64*3
vmovdqa $xc2,0x20(%rsp)
sub \$192,$len # len-=64*3
vmovdqa $xd2,0x30(%rsp)
.Loop_tail4xop:
movzb ($inp,%r10),%eax
movzb (%rsp,%r10),%ecx
lea 1(%r10),%r10
xor %ecx,%eax
mov %al,-1($out,%r10)
dec $len
jnz .Loop_tail4xop
.Ldone4xop:
vzeroupper
___
$code.=<<___ if ($win64);
lea 0x140+0x30(%rsp),%r11
movaps -0x30(%r11),%xmm6
movaps -0x20(%r11),%xmm7
movaps -0x10(%r11),%xmm8
movaps 0x00(%r11),%xmm9
movaps 0x10(%r11),%xmm10
movaps 0x20(%r11),%xmm11
movaps 0x30(%r11),%xmm12
movaps 0x40(%r11),%xmm13
movaps 0x50(%r11),%xmm14
movaps 0x60(%r11),%xmm15
___
$code.=<<___;
add \$0x148+$xframe,%rsp
ret
.size ChaCha20_4xop,.-ChaCha20_4xop
___
}
########################################################################
# AVX2 code path
if ($avx>1) {
my ($xb0,$xb1,$xb2,$xb3, $xd0,$xd1,$xd2,$xd3,
$xa0,$xa1,$xa2,$xa3, $xt0,$xt1,$xt2,$xt3)=map("%ymm$_",(0..15));
my @xx=($xa0,$xa1,$xa2,$xa3, $xb0,$xb1,$xb2,$xb3,
"%nox","%nox","%nox","%nox", $xd0,$xd1,$xd2,$xd3);
sub AVX2_lane_ROUND {
my ($a0,$b0,$c0,$d0)=@_;
my ($a1,$b1,$c1,$d1)=map(($_&~3)+(($_+1)&3),($a0,$b0,$c0,$d0));
my ($a2,$b2,$c2,$d2)=map(($_&~3)+(($_+1)&3),($a1,$b1,$c1,$d1));
my ($a3,$b3,$c3,$d3)=map(($_&~3)+(($_+1)&3),($a2,$b2,$c2,$d2));
my ($xc,$xc_,$t0,$t1)=map("\"$_\"",$xt0,$xt1,$xt2,$xt3);
my @x=map("\"$_\"",@xx);
# Consider order in which variables are addressed by their
# index:
#
# a b c d
#
# 0 4 8 12 < even round
# 1 5 9 13
# 2 6 10 14
# 3 7 11 15
# 0 5 10 15 < odd round
# 1 6 11 12
# 2 7 8 13
# 3 4 9 14
#
# 'a', 'b' and 'd's are permanently allocated in registers,
# @x[0..7,12..15], while 'c's are maintained in memory. If
# you observe 'c' column, you'll notice that pair of 'c's is
# invariant between rounds. This means that we have to reload
# them once per round, in the middle. This is why you'll see
# bunch of 'c' stores and loads in the middle, but none in
# the beginning or end.
(
"&vpaddd (@x[$a0],@x[$a0],@x[$b0])", # Q1
"&vpxor (@x[$d0],@x[$a0],@x[$d0])",
"&vpshufb (@x[$d0],@x[$d0],$t1)",
"&vpaddd (@x[$a1],@x[$a1],@x[$b1])", # Q2
"&vpxor (@x[$d1],@x[$a1],@x[$d1])",
"&vpshufb (@x[$d1],@x[$d1],$t1)",
"&vpaddd ($xc,$xc,@x[$d0])",
"&vpxor (@x[$b0],$xc,@x[$b0])",
"&vpslld ($t0,@x[$b0],12)",
"&vpsrld (@x[$b0],@x[$b0],20)",
"&vpor (@x[$b0],$t0,@x[$b0])",
"&vbroadcasti128($t0,'(%r11)')", # .Lrot24(%rip)
"&vpaddd ($xc_,$xc_,@x[$d1])",
"&vpxor (@x[$b1],$xc_,@x[$b1])",
"&vpslld ($t1,@x[$b1],12)",
"&vpsrld (@x[$b1],@x[$b1],20)",
"&vpor (@x[$b1],$t1,@x[$b1])",
"&vpaddd (@x[$a0],@x[$a0],@x[$b0])",
"&vpxor (@x[$d0],@x[$a0],@x[$d0])",
"&vpshufb (@x[$d0],@x[$d0],$t0)",
"&vpaddd (@x[$a1],@x[$a1],@x[$b1])",
"&vpxor (@x[$d1],@x[$a1],@x[$d1])",
"&vpshufb (@x[$d1],@x[$d1],$t0)",
"&vpaddd ($xc,$xc,@x[$d0])",
"&vpxor (@x[$b0],$xc,@x[$b0])",
"&vpslld ($t1,@x[$b0],7)",
"&vpsrld (@x[$b0],@x[$b0],25)",
"&vpor (@x[$b0],$t1,@x[$b0])",
"&vbroadcasti128($t1,'(%r10)')", # .Lrot16(%rip)
"&vpaddd ($xc_,$xc_,@x[$d1])",
"&vpxor (@x[$b1],$xc_,@x[$b1])",
"&vpslld ($t0,@x[$b1],7)",
"&vpsrld (@x[$b1],@x[$b1],25)",
"&vpor (@x[$b1],$t0,@x[$b1])",
"&vmovdqa (\"`32*($c0-8)`(%rsp)\",$xc)", # reload pair of 'c's
"&vmovdqa (\"`32*($c1-8)`(%rsp)\",$xc_)",
"&vmovdqa ($xc,\"`32*($c2-8)`(%rsp)\")",
"&vmovdqa ($xc_,\"`32*($c3-8)`(%rsp)\")",
"&vpaddd (@x[$a2],@x[$a2],@x[$b2])", # Q3
"&vpxor (@x[$d2],@x[$a2],@x[$d2])",
"&vpshufb (@x[$d2],@x[$d2],$t1)",
"&vpaddd (@x[$a3],@x[$a3],@x[$b3])", # Q4
"&vpxor (@x[$d3],@x[$a3],@x[$d3])",
"&vpshufb (@x[$d3],@x[$d3],$t1)",
"&vpaddd ($xc,$xc,@x[$d2])",
"&vpxor (@x[$b2],$xc,@x[$b2])",
"&vpslld ($t0,@x[$b2],12)",
"&vpsrld (@x[$b2],@x[$b2],20)",
"&vpor (@x[$b2],$t0,@x[$b2])",
"&vbroadcasti128($t0,'(%r11)')", # .Lrot24(%rip)
"&vpaddd ($xc_,$xc_,@x[$d3])",
"&vpxor (@x[$b3],$xc_,@x[$b3])",
"&vpslld ($t1,@x[$b3],12)",
"&vpsrld (@x[$b3],@x[$b3],20)",
"&vpor (@x[$b3],$t1,@x[$b3])",
"&vpaddd (@x[$a2],@x[$a2],@x[$b2])",
"&vpxor (@x[$d2],@x[$a2],@x[$d2])",
"&vpshufb (@x[$d2],@x[$d2],$t0)",
"&vpaddd (@x[$a3],@x[$a3],@x[$b3])",
"&vpxor (@x[$d3],@x[$a3],@x[$d3])",
"&vpshufb (@x[$d3],@x[$d3],$t0)",
"&vpaddd ($xc,$xc,@x[$d2])",
"&vpxor (@x[$b2],$xc,@x[$b2])",
"&vpslld ($t1,@x[$b2],7)",
"&vpsrld (@x[$b2],@x[$b2],25)",
"&vpor (@x[$b2],$t1,@x[$b2])",
"&vbroadcasti128($t1,'(%r10)')", # .Lrot16(%rip)
"&vpaddd ($xc_,$xc_,@x[$d3])",
"&vpxor (@x[$b3],$xc_,@x[$b3])",
"&vpslld ($t0,@x[$b3],7)",
"&vpsrld (@x[$b3],@x[$b3],25)",
"&vpor (@x[$b3],$t0,@x[$b3])"
);
}
my $xframe = $win64 ? 0xb0 : 8;
$code.=<<___;
.type ChaCha20_8x,\@function,5
.align 32
ChaCha20_8x:
.LChaCha20_8x:
mov %rsp,%r10
sub \$0x280+$xframe,%rsp
and \$-32,%rsp
___
$code.=<<___ if ($win64);
lea 0x290+0x30(%rsp),%r11
movaps %xmm6,-0x30(%r11)
movaps %xmm7,-0x20(%r11)
movaps %xmm8,-0x10(%r11)
movaps %xmm9,0x00(%r11)
movaps %xmm10,0x10(%r11)
movaps %xmm11,0x20(%r11)
movaps %xmm12,0x30(%r11)
movaps %xmm13,0x40(%r11)
movaps %xmm14,0x50(%r11)
movaps %xmm15,0x60(%r11)
___
$code.=<<___;
vzeroupper
mov %r10,0x280(%rsp)
################ stack layout
# +0x00 SIMD equivalent of @x[8-12]
# ...
# +0x80 constant copy of key[0-2] smashed by lanes
# ...
# +0x200 SIMD counters (with nonce smashed by lanes)
# ...
# +0x280 saved %rsp
vbroadcasti128 .Lsigma(%rip),$xa3 # key[0]
vbroadcasti128 ($key),$xb3 # key[1]
vbroadcasti128 16($key),$xt3 # key[2]
vbroadcasti128 ($counter),$xd3 # key[3]
lea 0x100(%rsp),%rcx # size optimization
lea 0x200(%rsp),%rax # size optimization
lea .Lrot16(%rip),%r10
lea .Lrot24(%rip),%r11
vpshufd \$0x00,$xa3,$xa0 # smash key by lanes...
vpshufd \$0x55,$xa3,$xa1
vmovdqa $xa0,0x80-0x100(%rcx) # ... and offload
vpshufd \$0xaa,$xa3,$xa2
vmovdqa $xa1,0xa0-0x100(%rcx)
vpshufd \$0xff,$xa3,$xa3
vmovdqa $xa2,0xc0-0x100(%rcx)
vmovdqa $xa3,0xe0-0x100(%rcx)
vpshufd \$0x00,$xb3,$xb0
vpshufd \$0x55,$xb3,$xb1
vmovdqa $xb0,0x100-0x100(%rcx)
vpshufd \$0xaa,$xb3,$xb2
vmovdqa $xb1,0x120-0x100(%rcx)
vpshufd \$0xff,$xb3,$xb3
vmovdqa $xb2,0x140-0x100(%rcx)
vmovdqa $xb3,0x160-0x100(%rcx)
vpshufd \$0x00,$xt3,$xt0 # "xc0"
vpshufd \$0x55,$xt3,$xt1 # "xc1"
vmovdqa $xt0,0x180-0x200(%rax)
vpshufd \$0xaa,$xt3,$xt2 # "xc2"
vmovdqa $xt1,0x1a0-0x200(%rax)
vpshufd \$0xff,$xt3,$xt3 # "xc3"
vmovdqa $xt2,0x1c0-0x200(%rax)
vmovdqa $xt3,0x1e0-0x200(%rax)
vpshufd \$0x00,$xd3,$xd0
vpshufd \$0x55,$xd3,$xd1
vpaddd .Lincy(%rip),$xd0,$xd0 # don't save counters yet
vpshufd \$0xaa,$xd3,$xd2
vmovdqa $xd1,0x220-0x200(%rax)
vpshufd \$0xff,$xd3,$xd3
vmovdqa $xd2,0x240-0x200(%rax)
vmovdqa $xd3,0x260-0x200(%rax)
jmp .Loop_enter8x
.align 32
.Loop_outer8x:
vmovdqa 0x80-0x100(%rcx),$xa0 # re-load smashed key
vmovdqa 0xa0-0x100(%rcx),$xa1
vmovdqa 0xc0-0x100(%rcx),$xa2
vmovdqa 0xe0-0x100(%rcx),$xa3
vmovdqa 0x100-0x100(%rcx),$xb0
vmovdqa 0x120-0x100(%rcx),$xb1
vmovdqa 0x140-0x100(%rcx),$xb2
vmovdqa 0x160-0x100(%rcx),$xb3
vmovdqa 0x180-0x200(%rax),$xt0 # "xc0"
vmovdqa 0x1a0-0x200(%rax),$xt1 # "xc1"
vmovdqa 0x1c0-0x200(%rax),$xt2 # "xc2"
vmovdqa 0x1e0-0x200(%rax),$xt3 # "xc3"
vmovdqa 0x200-0x200(%rax),$xd0
vmovdqa 0x220-0x200(%rax),$xd1
vmovdqa 0x240-0x200(%rax),$xd2
vmovdqa 0x260-0x200(%rax),$xd3
vpaddd .Leight(%rip),$xd0,$xd0 # next SIMD counters
.Loop_enter8x:
vmovdqa $xt2,0x40(%rsp) # SIMD equivalent of "@x[10]"
vmovdqa $xt3,0x60(%rsp) # SIMD equivalent of "@x[11]"
vbroadcasti128 (%r10),$xt3
vmovdqa $xd0,0x200-0x200(%rax) # save SIMD counters
mov \$10,%eax
jmp .Loop8x
.align 32
.Loop8x:
___
foreach (&AVX2_lane_ROUND(0, 4, 8,12)) { eval; }
foreach (&AVX2_lane_ROUND(0, 5,10,15)) { eval; }
$code.=<<___;
dec %eax
jnz .Loop8x
lea 0x200(%rsp),%rax # size optimization
vpaddd 0x80-0x100(%rcx),$xa0,$xa0 # accumulate key
vpaddd 0xa0-0x100(%rcx),$xa1,$xa1
vpaddd 0xc0-0x100(%rcx),$xa2,$xa2
vpaddd 0xe0-0x100(%rcx),$xa3,$xa3
vpunpckldq $xa1,$xa0,$xt2 # "de-interlace" data
vpunpckldq $xa3,$xa2,$xt3
vpunpckhdq $xa1,$xa0,$xa0
vpunpckhdq $xa3,$xa2,$xa2
vpunpcklqdq $xt3,$xt2,$xa1 # "a0"
vpunpckhqdq $xt3,$xt2,$xt2 # "a1"
vpunpcklqdq $xa2,$xa0,$xa3 # "a2"
vpunpckhqdq $xa2,$xa0,$xa0 # "a3"
___
($xa0,$xa1,$xa2,$xa3,$xt2)=($xa1,$xt2,$xa3,$xa0,$xa2);
$code.=<<___;
vpaddd 0x100-0x100(%rcx),$xb0,$xb0
vpaddd 0x120-0x100(%rcx),$xb1,$xb1
vpaddd 0x140-0x100(%rcx),$xb2,$xb2
vpaddd 0x160-0x100(%rcx),$xb3,$xb3
vpunpckldq $xb1,$xb0,$xt2
vpunpckldq $xb3,$xb2,$xt3
vpunpckhdq $xb1,$xb0,$xb0
vpunpckhdq $xb3,$xb2,$xb2
vpunpcklqdq $xt3,$xt2,$xb1 # "b0"
vpunpckhqdq $xt3,$xt2,$xt2 # "b1"
vpunpcklqdq $xb2,$xb0,$xb3 # "b2"
vpunpckhqdq $xb2,$xb0,$xb0 # "b3"
___
($xb0,$xb1,$xb2,$xb3,$xt2)=($xb1,$xt2,$xb3,$xb0,$xb2);
$code.=<<___;
vperm2i128 \$0x20,$xb0,$xa0,$xt3 # "de-interlace" further
vperm2i128 \$0x31,$xb0,$xa0,$xb0
vperm2i128 \$0x20,$xb1,$xa1,$xa0
vperm2i128 \$0x31,$xb1,$xa1,$xb1
vperm2i128 \$0x20,$xb2,$xa2,$xa1
vperm2i128 \$0x31,$xb2,$xa2,$xb2
vperm2i128 \$0x20,$xb3,$xa3,$xa2
vperm2i128 \$0x31,$xb3,$xa3,$xb3
___
($xa0,$xa1,$xa2,$xa3,$xt3)=($xt3,$xa0,$xa1,$xa2,$xa3);
my ($xc0,$xc1,$xc2,$xc3)=($xt0,$xt1,$xa0,$xa1);
$code.=<<___;
vmovdqa $xa0,0x00(%rsp) # offload $xaN
vmovdqa $xa1,0x20(%rsp)
vmovdqa 0x40(%rsp),$xc2 # $xa0
vmovdqa 0x60(%rsp),$xc3 # $xa1
vpaddd 0x180-0x200(%rax),$xc0,$xc0
vpaddd 0x1a0-0x200(%rax),$xc1,$xc1
vpaddd 0x1c0-0x200(%rax),$xc2,$xc2
vpaddd 0x1e0-0x200(%rax),$xc3,$xc3
vpunpckldq $xc1,$xc0,$xt2
vpunpckldq $xc3,$xc2,$xt3
vpunpckhdq $xc1,$xc0,$xc0
vpunpckhdq $xc3,$xc2,$xc2
vpunpcklqdq $xt3,$xt2,$xc1 # "c0"
vpunpckhqdq $xt3,$xt2,$xt2 # "c1"
vpunpcklqdq $xc2,$xc0,$xc3 # "c2"
vpunpckhqdq $xc2,$xc0,$xc0 # "c3"
___
($xc0,$xc1,$xc2,$xc3,$xt2)=($xc1,$xt2,$xc3,$xc0,$xc2);
$code.=<<___;
vpaddd 0x200-0x200(%rax),$xd0,$xd0
vpaddd 0x220-0x200(%rax),$xd1,$xd1
vpaddd 0x240-0x200(%rax),$xd2,$xd2
vpaddd 0x260-0x200(%rax),$xd3,$xd3
vpunpckldq $xd1,$xd0,$xt2
vpunpckldq $xd3,$xd2,$xt3
vpunpckhdq $xd1,$xd0,$xd0
vpunpckhdq $xd3,$xd2,$xd2
vpunpcklqdq $xt3,$xt2,$xd1 # "d0"
vpunpckhqdq $xt3,$xt2,$xt2 # "d1"
vpunpcklqdq $xd2,$xd0,$xd3 # "d2"
vpunpckhqdq $xd2,$xd0,$xd0 # "d3"
___
($xd0,$xd1,$xd2,$xd3,$xt2)=($xd1,$xt2,$xd3,$xd0,$xd2);
$code.=<<___;
vperm2i128 \$0x20,$xd0,$xc0,$xt3 # "de-interlace" further
vperm2i128 \$0x31,$xd0,$xc0,$xd0
vperm2i128 \$0x20,$xd1,$xc1,$xc0
vperm2i128 \$0x31,$xd1,$xc1,$xd1
vperm2i128 \$0x20,$xd2,$xc2,$xc1
vperm2i128 \$0x31,$xd2,$xc2,$xd2
vperm2i128 \$0x20,$xd3,$xc3,$xc2
vperm2i128 \$0x31,$xd3,$xc3,$xd3
___
($xc0,$xc1,$xc2,$xc3,$xt3)=($xt3,$xc0,$xc1,$xc2,$xc3);
($xb0,$xb1,$xb2,$xb3,$xc0,$xc1,$xc2,$xc3)=
($xc0,$xc1,$xc2,$xc3,$xb0,$xb1,$xb2,$xb3);
($xa0,$xa1)=($xt2,$xt3);
$code.=<<___;
vmovdqa 0x00(%rsp),$xa0 # $xaN was offloaded, remember?
vmovdqa 0x20(%rsp),$xa1
cmp \$64*8,$len
jb .Ltail8x
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
lea 0x80($inp),$inp # size optimization
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
lea 0x80($out),$out # size optimization
vpxor 0x00($inp),$xa1,$xa1
vpxor 0x20($inp),$xb1,$xb1
vpxor 0x40($inp),$xc1,$xc1
vpxor 0x60($inp),$xd1,$xd1
lea 0x80($inp),$inp # size optimization
vmovdqu $xa1,0x00($out)
vmovdqu $xb1,0x20($out)
vmovdqu $xc1,0x40($out)
vmovdqu $xd1,0x60($out)
lea 0x80($out),$out # size optimization
vpxor 0x00($inp),$xa2,$xa2
vpxor 0x20($inp),$xb2,$xb2
vpxor 0x40($inp),$xc2,$xc2
vpxor 0x60($inp),$xd2,$xd2
lea 0x80($inp),$inp # size optimization
vmovdqu $xa2,0x00($out)
vmovdqu $xb2,0x20($out)
vmovdqu $xc2,0x40($out)
vmovdqu $xd2,0x60($out)
lea 0x80($out),$out # size optimization
vpxor 0x00($inp),$xa3,$xa3
vpxor 0x20($inp),$xb3,$xb3
vpxor 0x40($inp),$xc3,$xc3
vpxor 0x60($inp),$xd3,$xd3
lea 0x80($inp),$inp # size optimization
vmovdqu $xa3,0x00($out)
vmovdqu $xb3,0x20($out)
vmovdqu $xc3,0x40($out)
vmovdqu $xd3,0x60($out)
lea 0x80($out),$out # size optimization
sub \$64*8,$len
jnz .Loop_outer8x
jmp .Ldone8x
.Ltail8x:
cmp \$448,$len
jae .L448_or_more8x
cmp \$384,$len
jae .L384_or_more8x
cmp \$320,$len
jae .L320_or_more8x
cmp \$256,$len
jae .L256_or_more8x
cmp \$192,$len
jae .L192_or_more8x
cmp \$128,$len
jae .L128_or_more8x
cmp \$64,$len
jae .L64_or_more8x
xor %r10,%r10
vmovdqa $xa0,0x00(%rsp)
vmovdqa $xb0,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L64_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
je .Ldone8x
lea 0x40($inp),$inp # inp+=64*1
xor %r10,%r10
vmovdqa $xc0,0x00(%rsp)
lea 0x40($out),$out # out+=64*1
sub \$64,$len # len-=64*1
vmovdqa $xd0,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L128_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
je .Ldone8x
lea 0x80($inp),$inp # inp+=64*2
xor %r10,%r10
vmovdqa $xa1,0x00(%rsp)
lea 0x80($out),$out # out+=64*2
sub \$128,$len # len-=64*2
vmovdqa $xb1,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L192_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
vpxor 0x80($inp),$xa1,$xa1
vpxor 0xa0($inp),$xb1,$xb1
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
vmovdqu $xa1,0x80($out)
vmovdqu $xb1,0xa0($out)
je .Ldone8x
lea 0xc0($inp),$inp # inp+=64*3
xor %r10,%r10
vmovdqa $xc1,0x00(%rsp)
lea 0xc0($out),$out # out+=64*3
sub \$192,$len # len-=64*3
vmovdqa $xd1,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L256_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
vpxor 0x80($inp),$xa1,$xa1
vpxor 0xa0($inp),$xb1,$xb1
vpxor 0xc0($inp),$xc1,$xc1
vpxor 0xe0($inp),$xd1,$xd1
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
vmovdqu $xa1,0x80($out)
vmovdqu $xb1,0xa0($out)
vmovdqu $xc1,0xc0($out)
vmovdqu $xd1,0xe0($out)
je .Ldone8x
lea 0x100($inp),$inp # inp+=64*4
xor %r10,%r10
vmovdqa $xa2,0x00(%rsp)
lea 0x100($out),$out # out+=64*4
sub \$256,$len # len-=64*4
vmovdqa $xb2,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L320_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
vpxor 0x80($inp),$xa1,$xa1
vpxor 0xa0($inp),$xb1,$xb1
vpxor 0xc0($inp),$xc1,$xc1
vpxor 0xe0($inp),$xd1,$xd1
vpxor 0x100($inp),$xa2,$xa2
vpxor 0x120($inp),$xb2,$xb2
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
vmovdqu $xa1,0x80($out)
vmovdqu $xb1,0xa0($out)
vmovdqu $xc1,0xc0($out)
vmovdqu $xd1,0xe0($out)
vmovdqu $xa2,0x100($out)
vmovdqu $xb2,0x120($out)
je .Ldone8x
lea 0x140($inp),$inp # inp+=64*5
xor %r10,%r10
vmovdqa $xc2,0x00(%rsp)
lea 0x140($out),$out # out+=64*5
sub \$320,$len # len-=64*5
vmovdqa $xd2,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L384_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
vpxor 0x80($inp),$xa1,$xa1
vpxor 0xa0($inp),$xb1,$xb1
vpxor 0xc0($inp),$xc1,$xc1
vpxor 0xe0($inp),$xd1,$xd1
vpxor 0x100($inp),$xa2,$xa2
vpxor 0x120($inp),$xb2,$xb2
vpxor 0x140($inp),$xc2,$xc2
vpxor 0x160($inp),$xd2,$xd2
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
vmovdqu $xa1,0x80($out)
vmovdqu $xb1,0xa0($out)
vmovdqu $xc1,0xc0($out)
vmovdqu $xd1,0xe0($out)
vmovdqu $xa2,0x100($out)
vmovdqu $xb2,0x120($out)
vmovdqu $xc2,0x140($out)
vmovdqu $xd2,0x160($out)
je .Ldone8x
lea 0x180($inp),$inp # inp+=64*6
xor %r10,%r10
vmovdqa $xa3,0x00(%rsp)
lea 0x180($out),$out # out+=64*6
sub \$384,$len # len-=64*6
vmovdqa $xb3,0x20(%rsp)
jmp .Loop_tail8x
.align 32
.L448_or_more8x:
vpxor 0x00($inp),$xa0,$xa0 # xor with input
vpxor 0x20($inp),$xb0,$xb0
vpxor 0x40($inp),$xc0,$xc0
vpxor 0x60($inp),$xd0,$xd0
vpxor 0x80($inp),$xa1,$xa1
vpxor 0xa0($inp),$xb1,$xb1
vpxor 0xc0($inp),$xc1,$xc1
vpxor 0xe0($inp),$xd1,$xd1
vpxor 0x100($inp),$xa2,$xa2
vpxor 0x120($inp),$xb2,$xb2
vpxor 0x140($inp),$xc2,$xc2
vpxor 0x160($inp),$xd2,$xd2
vpxor 0x180($inp),$xa3,$xa3
vpxor 0x1a0($inp),$xb3,$xb3
vmovdqu $xa0,0x00($out)
vmovdqu $xb0,0x20($out)
vmovdqu $xc0,0x40($out)
vmovdqu $xd0,0x60($out)
vmovdqu $xa1,0x80($out)
vmovdqu $xb1,0xa0($out)
vmovdqu $xc1,0xc0($out)
vmovdqu $xd1,0xe0($out)
vmovdqu $xa2,0x100($out)
vmovdqu $xb2,0x120($out)
vmovdqu $xc2,0x140($out)
vmovdqu $xd2,0x160($out)
vmovdqu $xa3,0x180($out)
vmovdqu $xb3,0x1a0($out)
je .Ldone8x
lea 0x1c0($inp),$inp # inp+=64*7
xor %r10,%r10
vmovdqa $xc3,0x00(%rsp)
lea 0x1c0($out),$out # out+=64*7
sub \$448,$len # len-=64*7
vmovdqa $xd3,0x20(%rsp)
.Loop_tail8x:
movzb ($inp,%r10),%eax
movzb (%rsp,%r10),%ecx
lea 1(%r10),%r10
xor %ecx,%eax
mov %al,-1($out,%r10)
dec $len
jnz .Loop_tail8x
.Ldone8x:
vzeroall
___
$code.=<<___ if ($win64);
lea 0x290+0x30(%rsp),%r11
movaps -0x30(%r11),%xmm6
movaps -0x20(%r11),%xmm7
movaps -0x10(%r11),%xmm8
movaps 0x00(%r11),%xmm9
movaps 0x10(%r11),%xmm10
movaps 0x20(%r11),%xmm11
movaps 0x30(%r11),%xmm12
movaps 0x40(%r11),%xmm13
movaps 0x50(%r11),%xmm14
movaps 0x60(%r11),%xmm15
___
$code.=<<___;
mov 0x280(%rsp),%rsp
ret
.size ChaCha20_8x,.-ChaCha20_8x
___
}
foreach (split("\n",$code)) {
s/\`([^\`]*)\`/eval $1/geo;
s/%x#%y/%x/go;
print $_,"\n";
}
close STDOUT;