openssl/apps/engine.c

530 lines
15 KiB
C
Raw Normal View History

/* apps/engine.c -*- mode: C; c-file-style: "eay" -*- */
/* Written by Richard Levitte <richard@levitte.org> for the OpenSSL
* project 2000.
*/
/* ====================================================================
* Copyright (c) 2000 The OpenSSL Project. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* 3. All advertising materials mentioning features or use of this
* software must display the following acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
*
* 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
* endorse or promote products derived from this software without
* prior written permission. For written permission, please contact
* licensing@OpenSSL.org.
*
* 5. Products derived from this software may not be called "OpenSSL"
* nor may "OpenSSL" appear in their names without prior written
* permission of the OpenSSL Project.
*
* 6. Redistributions of any form whatsoever must retain the following
* acknowledgment:
* "This product includes software developed by the OpenSSL Project
* for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
*
* THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ====================================================================
*
* This product includes cryptographic software written by Eric Young
* (eay@cryptsoft.com). This product includes software written by Tim
* Hudson (tjh@cryptsoft.com).
*
*/
#ifndef OPENSSL_NO_ENGINE
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#ifdef OPENSSL_NO_STDIO
#define APPS_WIN16
#endif
#include "apps.h"
#include <openssl/err.h>
#include <openssl/engine.h>
#include <openssl/ssl.h>
#undef PROG
#define PROG engine_main
static char *engine_usage[]={
"usage: engine opts [engine ...]\n",
" -v[v[v[v]]] - verbose mode, for each engine, list its 'control commands'\n",
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
" -vv will additionally display each command's description\n",
" -vvv will also add the input flags for each command\n",
" -vvvv will also show internal input flags\n",
" -c - for each engine, also list the capabilities\n",
" -t - for each engine, check that they are really available\n",
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
" -pre <cmd> - runs command 'cmd' against the ENGINE before any attempts\n",
" to load it (if -t is used)\n",
" -post <cmd> - runs command 'cmd' against the ENGINE after loading it\n",
" (only used if -t is also provided)\n",
" NB: -pre and -post will be applied to all ENGINEs supplied on the command\n",
" line, or all supported ENGINEs if none are specified.\n",
" Eg. '-pre \"SO_PATH:/lib/libdriver.so\"' calls command \"SO_PATH\" with\n",
" argument \"/lib/libdriver.so\".\n",
NULL
};
static void identity(void *ptr)
{
return;
}
static int append_buf(char **buf, const char *s, int *size, int step)
{
int l = strlen(s);
if (*buf == NULL)
{
*size = step;
*buf = OPENSSL_malloc(*size);
if (*buf == NULL)
return 0;
**buf = '\0';
}
if (**buf != '\0')
l += 2; /* ", " */
if (strlen(*buf) + strlen(s) >= (unsigned int)*size)
{
*size += step;
*buf = OPENSSL_realloc(*buf, *size);
}
if (*buf == NULL)
return 0;
if (**buf != '\0')
strcat(*buf, ", ");
strcat(*buf, s);
return 1;
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
static int util_flags(BIO *bio_out, unsigned int flags, const char *indent)
{
int started = 0, err = 0;
/* Indent before displaying input flags */
BIO_printf(bio_out, "%s%s(input flags): ", indent, indent);
if(flags == 0)
{
BIO_printf(bio_out, "<no flags>\n");
return 1;
}
/* If the object is internal, mark it in a way that shows instead of
* having it part of all the other flags, even if it really is. */
if(flags & ENGINE_CMD_FLAG_INTERNAL)
{
BIO_printf(bio_out, "[Internal] ");
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
if(flags & ENGINE_CMD_FLAG_NUMERIC)
{
if(started)
{
BIO_printf(bio_out, "|");
err = 1;
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
BIO_printf(bio_out, "NUMERIC");
started = 1;
}
/* Now we check that no combinations of the mutually exclusive NUMERIC,
* STRING, and NO_INPUT flags have been used. Future flags that can be
* OR'd together with these would need to added after these to preserve
* the testing logic. */
if(flags & ENGINE_CMD_FLAG_STRING)
{
if(started)
{
BIO_printf(bio_out, "|");
err = 1;
}
BIO_printf(bio_out, "STRING");
started = 1;
}
if(flags & ENGINE_CMD_FLAG_NO_INPUT)
{
if(started)
{
BIO_printf(bio_out, "|");
err = 1;
}
BIO_printf(bio_out, "NO_INPUT");
started = 1;
}
/* Check for unknown flags */
flags = flags & ~ENGINE_CMD_FLAG_NUMERIC &
~ENGINE_CMD_FLAG_STRING &
~ENGINE_CMD_FLAG_NO_INPUT &
~ENGINE_CMD_FLAG_INTERNAL;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
if(flags)
{
if(started) BIO_printf(bio_out, "|");
BIO_printf(bio_out, "<0x%04X>", flags);
}
if(err)
BIO_printf(bio_out, " <illegal flags!>");
BIO_printf(bio_out, "\n");
return 1;
}
static int util_verbose(ENGINE *e, int verbose, BIO *bio_out, const char *indent)
{
static const int line_wrap = 78;
int num;
2001-06-19 17:13:48 +00:00
int ret = 0;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
char *name = NULL;
char *desc = NULL;
int flags;
int xpos = 0;
2001-06-19 17:13:48 +00:00
STACK *cmds = NULL;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
if(!ENGINE_ctrl(e, ENGINE_CTRL_HAS_CTRL_FUNCTION, 0, NULL, NULL) ||
((num = ENGINE_ctrl(e, ENGINE_CTRL_GET_FIRST_CMD_TYPE,
0, NULL, NULL)) <= 0))
{
#if 0
BIO_printf(bio_out, "%s<no control commands>\n", indent);
#endif
return 1;
}
2001-06-19 17:13:48 +00:00
cmds = sk_new_null();
if(!cmds)
goto err;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
do {
int len;
/* Get the command input flags */
if((flags = ENGINE_ctrl(e, ENGINE_CTRL_GET_CMD_FLAGS, num,
NULL, NULL)) < 0)
goto err;
if (!(flags & ENGINE_CMD_FLAG_INTERNAL) || verbose >= 4)
{
/* Get the command name */
if((len = ENGINE_ctrl(e, ENGINE_CTRL_GET_NAME_LEN_FROM_CMD, num,
NULL, NULL)) <= 0)
goto err;
if((name = OPENSSL_malloc(len + 1)) == NULL)
goto err;
if(ENGINE_ctrl(e, ENGINE_CTRL_GET_NAME_FROM_CMD, num, name,
NULL) <= 0)
goto err;
/* Get the command description */
if((len = ENGINE_ctrl(e, ENGINE_CTRL_GET_DESC_LEN_FROM_CMD, num,
NULL, NULL)) < 0)
goto err;
if(len > 0)
{
if((desc = OPENSSL_malloc(len + 1)) == NULL)
goto err;
if(ENGINE_ctrl(e, ENGINE_CTRL_GET_DESC_FROM_CMD, num, desc,
NULL) <= 0)
goto err;
}
/* Now decide on the output */
if(xpos == 0)
/* Do an indent */
xpos = BIO_printf(bio_out, indent);
else
/* Otherwise prepend a ", " */
xpos += BIO_printf(bio_out, ", ");
if(verbose == 1)
{
/* We're just listing names, comma-delimited */
if((xpos > (int)strlen(indent)) &&
(xpos + (int)strlen(name) > line_wrap))
{
BIO_printf(bio_out, "\n");
xpos = BIO_printf(bio_out, indent);
}
xpos += BIO_printf(bio_out, "%s", name);
}
else
{
/* We're listing names plus descriptions */
BIO_printf(bio_out, "%s: %s\n", name,
(desc == NULL) ? "<no description>" : desc);
/* ... and sometimes input flags */
if((verbose >= 3) && !util_flags(bio_out, flags,
indent))
goto err;
xpos = 0;
}
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
OPENSSL_free(name); name = NULL;
if(desc) { OPENSSL_free(desc); desc = NULL; }
/* Move to the next command */
num = ENGINE_ctrl(e, ENGINE_CTRL_GET_NEXT_CMD_TYPE,
num, NULL, NULL);
} while(num > 0);
if(xpos > 0)
BIO_printf(bio_out, "\n");
2001-06-19 17:13:48 +00:00
ret = 1;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
err:
if(cmds) sk_pop_free(cmds, identity);
if(name) OPENSSL_free(name);
if(desc) OPENSSL_free(desc);
2001-06-19 17:13:48 +00:00
return ret;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
}
static void util_do_cmds(ENGINE *e, STACK *cmds, BIO *bio_out, const char *indent)
{
int loop, res, num = sk_num(cmds);
if(num < 0)
{
BIO_printf(bio_out, "[Error]: internal stack error\n");
return;
}
for(loop = 0; loop < num; loop++)
{
char buf[256];
const char *cmd, *arg;
cmd = sk_value(cmds, loop);
res = 1; /* assume success */
/* Check if this command has no ":arg" */
if((arg = strstr(cmd, ":")) == NULL)
{
if(!ENGINE_ctrl_cmd_string(e, cmd, NULL, 0))
res = 0;
}
else
{
if((int)(arg - cmd) > 254)
{
BIO_printf(bio_out,"[Error]: command name too long\n");
return;
}
memcpy(buf, cmd, (int)(arg - cmd));
buf[arg-cmd] = '\0';
arg++; /* Move past the ":" */
/* Call the command with the argument */
if(!ENGINE_ctrl_cmd_string(e, buf, arg, 0))
res = 0;
}
if(res)
BIO_printf(bio_out, "[Success]: %s\n", cmd);
else
{
BIO_printf(bio_out, "[Failure]: %s\n", cmd);
ERR_print_errors(bio_out);
}
}
}
int MAIN(int, char **);
int MAIN(int argc, char **argv)
{
int ret=1,i;
char **pp;
int verbose=0, list_cap=0, test_avail=0;
ENGINE *e;
STACK *engines = sk_new_null();
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
STACK *pre_cmds = sk_new_null();
STACK *post_cmds = sk_new_null();
int badops=1;
BIO *bio_out=NULL;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
const char *indent = " ";
apps_startup();
SSL_load_error_strings();
if (bio_err == NULL)
bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
if (!load_config(bio_err, NULL))
goto end;
bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
bio_out = BIO_push(tmpbio, bio_out);
}
#endif
argc--;
argv++;
while (argc >= 1)
{
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
if (strncmp(*argv,"-v",2) == 0)
{
if(strspn(*argv + 1, "v") < strlen(*argv + 1))
goto skip_arg_loop;
if((verbose=strlen(*argv + 1)) > 4)
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
goto skip_arg_loop;
}
else if (strcmp(*argv,"-c") == 0)
list_cap=1;
else if (strcmp(*argv,"-t") == 0)
test_avail=1;
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
else if (strcmp(*argv,"-pre") == 0)
{
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
argc--; argv++;
sk_push(pre_cmds,*argv);
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
else if (strcmp(*argv,"-post") == 0)
{
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
argc--; argv++;
sk_push(post_cmds,*argv);
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
else if ((strncmp(*argv,"-h",2) == 0) ||
(strcmp(*argv,"-?") == 0))
goto skip_arg_loop;
else
sk_push(engines,*argv);
argc--;
argv++;
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
/* Looks like everything went OK */
badops = 0;
skip_arg_loop:
if (badops)
{
for (pp=engine_usage; (*pp != NULL); pp++)
BIO_printf(bio_err,"%s",*pp);
goto end;
}
if (sk_num(engines) == 0)
{
for(e = ENGINE_get_first(); e != NULL; e = ENGINE_get_next(e))
{
sk_push(engines,(char *)ENGINE_get_id(e));
}
}
for (i=0; i<sk_num(engines); i++)
{
const char *id = sk_value(engines,i);
if ((e = ENGINE_by_id(id)) != NULL)
{
const char *name = ENGINE_get_name(e);
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
/* Do "id" first, then "name". Easier to auto-parse. */
BIO_printf(bio_out, "(%s) %s\n", id, name);
util_do_cmds(e, pre_cmds, bio_out, indent);
if (strcmp(ENGINE_get_id(e), id) != 0)
{
BIO_printf(bio_out, "Loaded: (%s) %s\n",
ENGINE_get_id(e), ENGINE_get_name(e));
}
if (list_cap)
{
int cap_size = 256;
char *cap_buf = NULL;
int k,n;
const int *nids;
ENGINE_CIPHERS_PTR fn_c;
ENGINE_DIGESTS_PTR fn_d;
if (ENGINE_get_RSA(e) != NULL
&& !append_buf(&cap_buf, "RSA",
&cap_size, 256))
goto end;
if (ENGINE_get_DSA(e) != NULL
&& !append_buf(&cap_buf, "DSA",
&cap_size, 256))
goto end;
if (ENGINE_get_DH(e) != NULL
&& !append_buf(&cap_buf, "DH",
&cap_size, 256))
goto end;
if (ENGINE_get_RAND(e) != NULL
&& !append_buf(&cap_buf, "RAND",
&cap_size, 256))
goto end;
fn_c = ENGINE_get_ciphers(e);
if(!fn_c) goto skip_ciphers;
n = fn_c(e, NULL, &nids, 0);
for(k=0 ; k < n ; ++k)
if(!append_buf(&cap_buf,
OBJ_nid2sn(nids[k]),
&cap_size, 256))
goto end;
skip_ciphers:
fn_d = ENGINE_get_digests(e);
if(!fn_d) goto skip_digests;
n = fn_d(e, NULL, &nids, 0);
for(k=0 ; k < n ; ++k)
if(!append_buf(&cap_buf,
OBJ_nid2sn(nids[k]),
&cap_size, 256))
goto end;
skip_digests:
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
if (cap_buf && (*cap_buf != '\0'))
BIO_printf(bio_out, " [%s]\n", cap_buf);
OPENSSL_free(cap_buf);
}
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
if(test_avail)
{
BIO_printf(bio_out, "%s", indent);
if (ENGINE_init(e))
{
BIO_printf(bio_out, "[ available ]\n");
util_do_cmds(e, post_cmds, bio_out, indent);
ENGINE_finish(e);
}
else
{
BIO_printf(bio_out, "[ unavailable ]\n");
ERR_print_errors_fp(stdout);
ERR_clear_error();
}
}
if((verbose > 0) && !util_verbose(e, verbose, bio_out, indent))
goto end;
ENGINE_free(e);
}
else
ERR_print_errors(bio_err);
}
ret=0;
end:
ERR_print_errors(bio_err);
sk_pop_free(engines, identity);
Changes to "openssl engine" to support the new control command code in ENGINE. * Extra verbosity can be added with more "v"'s, eg. '-vvv' gives information about input flags and descriptions for each control command in each ENGINE. Check the output of "openssl engine -vvv" for example. * '-pre <cmd>' and '-post <cmd>' can be used to invoke control commands on the specified ENGINE (or on all of them if no engine id is specified, although that usually gets pretty ugly). '-post' commands are only attempted if '-t' is specified and the engine successfully initialises. '-pre' commands are always attempted whether or not '-t' causes an initialisation to be tried afterwards. Multiple '-pre' and/or '-post' commands can be specified and they will be called in the order they occur on the command line. Parameterised commands (the normal case, there are currently no unparameterised ones) are split into command and argument via a separating colon. Eg. "openssl engine -pre SO_PATH:/lib/libdriver.so <id>" results in the call; ENGINE_ctrl_cmd_string(e, "SO_PATH", "/lib/libdriver.so", 0); Application code should similarly allow arbitrary name-value string pairs to be passed into ENGINEs in a manner matching that in apps/engine.c, either using the same colon-separated format, or entered as two distinct strings. Eg. as stored in a registry. The last parameter of ENGINE_ctrl_cmd_string can be changed from 0 to 1 if the command should only be attempted if it's supported by the specified ENGINE (eg. for commands like "FORK_CHECK:1" that may or may not apply to the run-time ENGINE).
2001-04-19 02:08:26 +00:00
sk_pop_free(pre_cmds, identity);
sk_pop_free(post_cmds, identity);
if (bio_out != NULL) BIO_free_all(bio_out);
apps_shutdown();
OPENSSL_EXIT(ret);
}
#else
# if PEDANTIC
static void *dummy=&dummy;
# endif
#endif