wbrawner/openssl
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
openssl/test/ssl-tests/05-sni.conf

309 lines
8.7 KiB
Text
Raw Normal View History

Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
# Generated with generate_ssl_tests.pl
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
num_tests = 9
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
test-0 = 0-SNI-switch-context
test-1 = 1-SNI-keep-context
test-2 = 2-SNI-no-server-support
test-3 = 3-SNI-no-client-support
test-4 = 4-SNI-bad-sni-ignore-mismatch
test-5 = 5-SNI-bad-sni-reject-mismatch
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
test-6 = 6-SNI-bad-clienthello-sni-ignore-mismatch
test-7 = 7-SNI-bad-clienthello-sni-reject-mismatch
test-8 = 8-SNI-clienthello-disable-v12
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
# ===========================================================
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[0-SNI-switch-context]
ssl_conf = 0-SNI-switch-context-ssl
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[0-SNI-switch-context-ssl]
server = 0-SNI-switch-context-server
client = 0-SNI-switch-context-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 0-SNI-switch-context-server
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[0-SNI-switch-context-server]
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[0-SNI-switch-context-client]
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-0]
ExpectedResult = Success
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ExpectedServerName = server2
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 0-SNI-switch-context-server-extra
server2 = 0-SNI-switch-context-server-extra
client = 0-SNI-switch-context-client-extra
[0-SNI-switch-context-server-extra]
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[0-SNI-switch-context-client-extra]
ServerName = server2
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
# ===========================================================
[1-SNI-keep-context]
ssl_conf = 1-SNI-keep-context-ssl
[1-SNI-keep-context-ssl]
server = 1-SNI-keep-context-server
client = 1-SNI-keep-context-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 1-SNI-keep-context-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[1-SNI-keep-context-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[1-SNI-keep-context-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-1]
ExpectedResult = Success
ExpectedServerName = server1
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 1-SNI-keep-context-server-extra
server2 = 1-SNI-keep-context-server-extra
client = 1-SNI-keep-context-client-extra
[1-SNI-keep-context-server-extra]
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[1-SNI-keep-context-client-extra]
ServerName = server1
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
# ===========================================================
[2-SNI-no-server-support]
ssl_conf = 2-SNI-no-server-support-ssl
[2-SNI-no-server-support-ssl]
server = 2-SNI-no-server-support-server
client = 2-SNI-no-server-support-client
[2-SNI-no-server-support-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[2-SNI-no-server-support-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-2]
ExpectedResult = Success
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
client = 2-SNI-no-server-support-client-extra
[2-SNI-no-server-support-client-extra]
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ServerName = server1
# ===========================================================
[3-SNI-no-client-support]
ssl_conf = 3-SNI-no-client-support-ssl
[3-SNI-no-client-support-ssl]
server = 3-SNI-no-client-support-server
client = 3-SNI-no-client-support-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 3-SNI-no-client-support-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[3-SNI-no-client-support-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[3-SNI-no-client-support-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-3]
ExpectedResult = Success
ExpectedServerName = server1
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 3-SNI-no-client-support-server-extra
server2 = 3-SNI-no-client-support-server-extra
[3-SNI-no-client-support-server-extra]
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ServerNameCallback = IgnoreMismatch
# ===========================================================
[4-SNI-bad-sni-ignore-mismatch]
ssl_conf = 4-SNI-bad-sni-ignore-mismatch-ssl
[4-SNI-bad-sni-ignore-mismatch-ssl]
server = 4-SNI-bad-sni-ignore-mismatch-server
client = 4-SNI-bad-sni-ignore-mismatch-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 4-SNI-bad-sni-ignore-mismatch-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[4-SNI-bad-sni-ignore-mismatch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[4-SNI-bad-sni-ignore-mismatch-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-4]
ExpectedResult = Success
ExpectedServerName = server1
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
server = 4-SNI-bad-sni-ignore-mismatch-server-extra
server2 = 4-SNI-bad-sni-ignore-mismatch-server-extra
client = 4-SNI-bad-sni-ignore-mismatch-client-extra
[4-SNI-bad-sni-ignore-mismatch-server-extra]
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ServerNameCallback = IgnoreMismatch
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[4-SNI-bad-sni-ignore-mismatch-client-extra]
ServerName = invalid
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
# ===========================================================
[5-SNI-bad-sni-reject-mismatch]
ssl_conf = 5-SNI-bad-sni-reject-mismatch-ssl
[5-SNI-bad-sni-reject-mismatch-ssl]
server = 5-SNI-bad-sni-reject-mismatch-server
client = 5-SNI-bad-sni-reject-mismatch-client
SSL tests: compress generated output a little Don't emit duplicate server/client sections when they are identical. Instead, just point to the same section. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-07-21 17:19:07 +00:00
server2 = 5-SNI-bad-sni-reject-mismatch-server
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
[5-SNI-bad-sni-reject-mismatch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
[5-SNI-bad-sni-reject-mismatch-client]
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-5]
ExpectedResult = ServerFail
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
ExpectedServerAlert = UnrecognizedName
server = 5-SNI-bad-sni-reject-mismatch-server-extra
server2 = 5-SNI-bad-sni-reject-mismatch-server-extra
client = 5-SNI-bad-sni-reject-mismatch-client-extra
[5-SNI-bad-sni-reject-mismatch-server-extra]
SSL test framework: port SNI tests Observe that the old tests were partly ill-defined: setting sn_server1 but not sn_server2 in ssltest_old.c does not enable the SNI callback. Fix this, and also explicitly test both flavours of SNI mismatch (ignore / fatal alert). Tests still pass. Reviewed-by: Rich Salz <rsalz@openssl.org>
2016-06-20 15:20:25 +00:00
ServerNameCallback = RejectMismatch
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
Reorganize SSL test structures Move custom server and client options from the test dictionary to an "extra" section of each server/client. Rename test expectations to say "Expected". This is a big but straightforward change. Primarily, this allows us to specify multiple server and client contexts without redefining the custom options for each of them. For example, instead of "ServerNPNProtocols", "Server2NPNProtocols", "ResumeServerNPNProtocols", we now have, "NPNProtocols". This simplifies writing resumption and SNI tests. The first application will be resumption tests for NPN and ALPN. Regrouping the options also makes it clearer which options apply to the server, which apply to the client, which configure the test, and which are test expectations. Reviewed-by: Richard Levitte <levitte@openssl.org>
2016-07-21 14:29:48 +00:00
[5-SNI-bad-sni-reject-mismatch-client-extra]
ServerName = invalid
Fix session ticket and SNI When session tickets are used, it's possible that SNI might swtich the SSL_CTX on an SSL. Normally, this is not a problem, because the initial_ctx/session_ctx are used for all session ticket/id processes. However, when the SNI callback occurs, it's possible that the callback may update the options in the SSL from the SSL_CTX, and this could cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things can happen: 1. The session ticket TLSEXT may not be written when the ticket expected flag is set. The state machine transistions to writing the ticket, and the client responds with an error as its not expecting a ticket. 2. When creating the session ticket, if the ticket key cb returns 0 the crypto/hmac contexts are not initialized, and the code crashes when trying to encrypt the session ticket. To fix 1, if the ticket TLSEXT is not written out, clear the expected ticket flag. To fix 2, consider a return of 0 from the ticket key cb a recoverable error, and write a 0 length ticket and continue. The client-side code can explicitly handle this case. Fix these two cases, and add unit test code to validate ticket behavior. Reviewed-by: Emilia Käsper <emilia@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1098)
2016-05-12 22:16:52 +00:00
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
# ===========================================================
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[6-SNI-bad-clienthello-sni-ignore-mismatch]
ssl_conf = 6-SNI-bad-clienthello-sni-ignore-mismatch-ssl
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[6-SNI-bad-clienthello-sni-ignore-mismatch-ssl]
server = 6-SNI-bad-clienthello-sni-ignore-mismatch-server
client = 6-SNI-bad-clienthello-sni-ignore-mismatch-client
server2 = 6-SNI-bad-clienthello-sni-ignore-mismatch-server
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[6-SNI-bad-clienthello-sni-ignore-mismatch-server]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[6-SNI-bad-clienthello-sni-ignore-mismatch-client]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-6]
ExpectedResult = Success
ExpectedServerName = server1
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
server = 6-SNI-bad-clienthello-sni-ignore-mismatch-server-extra
server2 = 6-SNI-bad-clienthello-sni-ignore-mismatch-server-extra
client = 6-SNI-bad-clienthello-sni-ignore-mismatch-client-extra
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[6-SNI-bad-clienthello-sni-ignore-mismatch-server-extra]
ServerNameCallback = ClientHelloIgnoreMismatch
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[6-SNI-bad-clienthello-sni-ignore-mismatch-client-extra]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
ServerName = invalid
# ===========================================================
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[7-SNI-bad-clienthello-sni-reject-mismatch]
ssl_conf = 7-SNI-bad-clienthello-sni-reject-mismatch-ssl
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[7-SNI-bad-clienthello-sni-reject-mismatch-ssl]
server = 7-SNI-bad-clienthello-sni-reject-mismatch-server
client = 7-SNI-bad-clienthello-sni-reject-mismatch-client
server2 = 7-SNI-bad-clienthello-sni-reject-mismatch-server
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[7-SNI-bad-clienthello-sni-reject-mismatch-server]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[7-SNI-bad-clienthello-sni-reject-mismatch-client]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-7]
ExpectedResult = ServerFail
ExpectedServerAlert = UnrecognizedName
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
server = 7-SNI-bad-clienthello-sni-reject-mismatch-server-extra
server2 = 7-SNI-bad-clienthello-sni-reject-mismatch-server-extra
client = 7-SNI-bad-clienthello-sni-reject-mismatch-client-extra
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[7-SNI-bad-clienthello-sni-reject-mismatch-server-extra]
ServerNameCallback = ClientHelloRejectMismatch
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[7-SNI-bad-clienthello-sni-reject-mismatch-client-extra]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
ServerName = invalid
# ===========================================================
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[8-SNI-clienthello-disable-v12]
ssl_conf = 8-SNI-clienthello-disable-v12-ssl
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[8-SNI-clienthello-disable-v12-ssl]
server = 8-SNI-clienthello-disable-v12-server
client = 8-SNI-clienthello-disable-v12-client
server2 = 8-SNI-clienthello-disable-v12-server
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[8-SNI-clienthello-disable-v12-server]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[8-SNI-clienthello-disable-v12-client]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
CipherString = DEFAULT
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
[test-8]
ExpectedProtocol = TLSv1.1
ExpectedServerName = server2
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
server = 8-SNI-clienthello-disable-v12-server-extra
server2 = 8-SNI-clienthello-disable-v12-server-extra
client = 8-SNI-clienthello-disable-v12-client-extra
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[8-SNI-clienthello-disable-v12-server-extra]
ServerNameCallback = ClientHelloNoV12
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
Rename SSL_CTX_set_early_cb to SSL_CTX_set_client_hello_cb. "Early callback" is a little ambiguous now that early data exists. Perhaps "ClientHello callback"? Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4349)
2017-09-07 22:39:40 +00:00
[8-SNI-clienthello-disable-v12-client-extra]
Tests for SSL early callback Plumb things through in the same place as the SNI callback, since we recommend that the early callback replace (and supplement) the SNI callback, and add a few test cases. Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2279)
2017-01-31 22:06:30 +00:00
ServerName = server2
Reference in a new issue Copy permalink