openssl/crypto/rc4/asm/rc4-ia64.S

// ====================================================================
// Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
// project.
//
// Rights for redistribution and usage in source and binary forms are
// granted according to the OpenSSL license. Warranty of any kind is
// disclaimed.
// ====================================================================

.ident  "rc4-ia64.S, Version 1.0"
.ident  "IA-64 ISA artwork by Andy Polyakov <appro@fy.chalmers.se>"

// What's wrong with compiler generated code? Because of the nature of
// C language, compiler doesn't [dare to] reorder load and stores. But
// being memory-bound, RC4 should benefit from reorder [on in-order-
// execution core such as IA-64]. But what can we reorder? At the very
// least we can safely reorder references to key schedule in respect
// to input and output streams. Secondly, less obvious, it's possible
// to pull up some references to elements of the key schedule itself.
// Fact is that such prior loads are not safe only for "degenerated"
// key schedule, when all elements equal to the same value, which is
// never the case [key schedule setup routine makes sure it's not].
// Furthermore. In order to compress loop body to the minimum, I chose
// to deploy deposit instruction, which substitutes for the whole
// key->data+((x&255)<<log2(sizeof(key->data[0]))). This unfortunately
// requires key->data to be aligned at sizeof(key->data) boundary.
// This is why you'll find "RC4_INT pad[512-256-2];" addenum to RC4_KEY
// and "d=(RC4_INT *)(((size_t)(d+255))&~(sizeof(key->data)-1));" in
// rc4_skey.c [and rc4_enc.c, where it's retained for debugging
// purposes]. Throughput is ~210MBps on 900MHz CPU, which is is >3x
// faster than gcc generated code and +30% - if compared to HP-UX C.
// Unrolling loop below should give >30% on top of that...

.text
.explicit

#if defined(_HPUX_SOURCE) && !defined(_LP64)
# define ADDP	addp4
#else
# define ADDP	add
#endif

#define SZ	4	// this is set to sizeof(RC4_INT)
// SZ==4 seems to be optimal. At least SZ==8 is not any faster, not for
// assembler implementation, while SZ==1 code is ~30% slower.
#if SZ==1	// RC4_INT is unsigned char
# define	LDKEY	ld1
# define	STKEY	st1
# define	OFF	0
#elif SZ==4	// RC4_INT is unsigned int
# define	LDKEY	ld4
# define	STKEY	st4
# define	OFF	2
#elif SZ==8	// RC4_INT is unsigned long
# define	LDKEY	ld8
# define	STKEY	st8
# define	OFF	3
#endif

out=r8;		// [expanded] output pointer
inp=r9;		// [expanded] output pointer
prsave=r10;
key=r28;	// [expanded] pointer to RC4_KEY
ksch=r29;	// (key->data+255)[&~(sizeof(key->data)-1)]
xx=r30;
yy=r31;

// void RC4(RC4_KEY *key,size_t len,const void *inp,void *out);
.global	RC4#
.proc	RC4#
.align	32
.skip	16
RC4:
	.prologue
	.fframe 0
	.save   ar.pfs,r2
	.save	ar.lc,r3
	.save	pr,prsave
{ .mii;	alloc	r2=ar.pfs,4,12,0,16
	mov	prsave=pr
	ADDP	key=0,in0		};;
{ .mib;	cmp.eq	p6,p0=0,in1			// len==0?
	mov	r3=ar.lc
(p6)	br.ret.spnt.many	b0	};;	// emergency exit

	.body
	.rotr	dat[4],key_x[4],tx[2],rnd[2],key_y[2],ty[1];

{ .mib;	LDKEY	xx=[key],SZ			// load key->x
	add	in1=-1,in1			// adjust len for loop counter
	nop.b	0			}
{ .mib;	ADDP	inp=0,in2
	ADDP	out=0,in3
	brp.loop.imp	.Ltop,.Lexit-16	};;
{ .mmi;	LDKEY	yy=[key]			// load key->y
	add	ksch=(255+1)*SZ,key		// as ksch will be used with
						// deposit instruction only,
						// I don't have to &~255...
	mov	ar.lc=in1		}
{ .mmi;	nop.m	0
	add	xx=1,xx
	mov	pr.rot=1<<16		};;
{ .mii;	nop.m	0
	dep	key_x[1]=xx,ksch,OFF,8
	mov	ar.ec=3			};;	// note that epilogue counter
						// is off by 1. I compensate
						// for this at exit...
.Ltop:
// The loop is scheduled for 3*(n+2) spin-rate on Itanium 2, which
// theoretically gives asymptotic performance of clock frequency
// divided by 3 bytes per seconds, or 500MBps on 1.5GHz CPU. Measured
// performance however is distinctly lower than 1/4:-( The culplrit
// seems to be *(out++)=dat, which inadvertently splits the bundle,
// even though there is M-unit available... Unrolling is due...
// Unrolled loop should collect output with variable shift instruction
// in order to avoid starvation for integer shifter... Only output
// pointer has to be aligned... It should be possible to get pretty
// close to theoretical peak...
{ .mmi;	(p16)	LDKEY	tx[0]=[key_x[1]]		// tx=key[xx]
	(p17)	LDKEY	ty[0]=[key_y[1]]		// ty=key[yy]	
	(p18)	dep	rnd[1]=rnd[1],ksch,OFF,8}	// &key[(tx+ty)&255]
{ .mmi;	(p19)	st1	[out]=dat[3],1			// *(out++)=dat
	(p16)	add	xx=1,xx				// x++
	(p0)	nop.i	0			};;
{ .mmi;	(p18)	LDKEY	rnd[1]=[rnd[1]]			// rnd=key[(tx+ty)&255]
	(p16)	ld1	dat[0]=[inp],1			// dat=*(inp++)
	(p16)	dep	key_x[0]=xx,ksch,OFF,8	}	// &key[xx&255]
{ .mmi;	(p0)	nop.m	0
	(p16)	add	yy=yy,tx[0]			// y+=tx
	(p0)	nop.i	0			};;
{ .mmi;	(p17)	STKEY	[key_y[1]]=tx[1]		// key[yy]=tx
	(p17)	STKEY	[key_x[2]]=ty[0]		// key[xx]=ty
	(p16)	dep	key_y[0]=yy,ksch,OFF,8	}	// &key[yy&255]
{ .mmb;	(p17)	add	rnd[0]=tx[1],ty[0]		// tx+=ty
	(p18)	xor	dat[2]=dat[2],rnd[1]		// dat^=rnd
	br.ctop.sptk	.Ltop			};;
.Lexit:
{ .mib;	STKEY	[key]=yy,-SZ			// save key->y
	mov	pr=prsave,0x1ffff
	nop.b	0			}
{ .mib;	st1	[out]=dat[3],1			// compensate for truncated
						// epilogue counter
	add	xx=-1,xx
	nop.b	0			};;
{ .mib;	STKEY	[key]=xx			// save key->x
	mov	ar.lc=r3
	br.ret.sptk.many	b0	};;
.endp	RC4#