RT3802: Fixes typos in doc/crypto/

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>

doc/crypto/ASN1_TIME_set.pod

@@ -123,7 +123,7 @@ otherwise.
 ASN1_TIME_print() returns 1 if the time is successfully printed out and 0 if
 an error occurred (I/O error or invalid time format).
 
-ASN1_TIME_diff() returns 1 for sucess and 0 for failure. It can fail if the
+ASN1_TIME_diff() returns 1 for success and 0 for failure. It can fail if the
 pass ASN1_TIME structure has invalid syntax for example.
 
 =cut

doc/crypto/ASN1_TYPE_get.pod

@@ -78,7 +78,7 @@ ASN1_TYPE_get() returns the type of the ASN1_TYPE argument.
 
 ASN1_TYPE_set() does not return a value.
 
-ASN1_TYPE_set1() returns 1 for sucess and 0 for failure.
+ASN1_TYPE_set1() returns 1 for success and 0 for failure.
 
 ASN1_TYPE_cmp() returns 0 if the types are identical and non-zero otherwise.
 

doc/crypto/ASN1_generate_nconf.pod

@@ -19,7 +19,7 @@ in an B<ASN1_TYPE> structure.
 B<str> contains the string to encode B<nconf> or B<cnf> contains
 the optional configuration information where additional strings
 will be read from. B<nconf> will typically come from a config
-file wherease B<cnf> is obtained from an B<X509V3_CTX> structure
+file whereas B<cnf> is obtained from an B<X509V3_CTX> structure
 which will typically be used by X509 v3 certificate extension
 functions. B<cnf> or B<nconf> can be set to B<NULL> if no additional
 configuration will be used.
@@ -181,7 +181,7 @@ A BITSTRING with bits 1 and 5 set and all others zero:
  FORMAT:BITLIST,BITSTRING:1,5
 
 A more complex example using a config file to produce a
-SEQUENCE consiting of a BOOL an OID and a UTF8String:
+SEQUENCE consisting of a BOOL an OID and a UTF8String:
 
  asn1 = SEQUENCE:seq_section
 

doc/crypto/BIO_f_cipher.pod

@@ -48,7 +48,7 @@ When encrypting BIO_flush() B<must> be called to flush the final block
 through the BIO. If it is not then the final block will fail a subsequent
 decrypt.
 
-When decrypting an error on the final block is signalled by a zero
+When decrypting an error on the final block is signaled by a zero
 return value from the read operation. A successful decrypt followed
 by EOF will also return zero for the final read. BIO_get_cipher_status()
 should be called to determine if the decrypt was successful.

doc/crypto/BIO_s_bio.pod

@@ -162,7 +162,7 @@ buffer is full or the read buffer is drained. Then the application has to
 flush the write buffer and/or fill the read buffer.
 
 Use the BIO_ctrl_pending(), to find out whether data is buffered in the BIO
-and must be transfered to the network. Use BIO_ctrl_get_read_request() to
+and must be transferred to the network. Use BIO_ctrl_get_read_request() to
 find out, how many bytes must be written into the buffer before the
 SSL_operation() can successfully be continued.
 

doc/crypto/BIO_s_connect.pod

@@ -64,8 +64,8 @@ form "hostname/any/other/path" or "hostname:port/any/other/path".
 BIO_set_conn_port() sets the port to B<port>. B<port> can be the
 numerical form or a string such as "http". A string will be looked
 up first using getservbyname() on the host platform but if that
-fails a standard table of port names will be used. Currently the
-list is http, telnet, socks, https, ssl, ftp, gopher and wais.
+fails a standard table of port names will be used. This internal
+list is http, telnet, socks, https, ssl, ftp, and gopher.
 
 BIO_set_conn_ip() sets the IP address to B<ip> using binary form,
 that is four bytes specifying the IP address in big-endian form.

doc/crypto/CONF_modules_load_file.pod

@@ -19,9 +19,9 @@ The function CONF_modules_load_file() configures OpenSSL using file
 B<filename> and application name B<appname>. If B<filename> is NULL
 the standard OpenSSL configuration file is used. If B<appname> is
 NULL the standard OpenSSL application name B<openssl_conf> is used.
-The behaviour can be cutomized using B<flags>.
+The behaviour can be customized using B<flags>.
 
-CONF_modules_load() is idential to CONF_modules_load_file() except it
+CONF_modules_load() is identical to CONF_modules_load_file() except it
 reads configuration information from B<cnf>.
 
 =head1 NOTES

doc/crypto/EC_GROUP_copy.pod

@@ -58,7 +58,7 @@ EC_GROUP_method_of obtains the EC_METHOD of B<group>.
 EC_GROUP_set_generator sets curve paramaters that must be agreed by all participants using the curve. These
 paramaters include the B<generator>, the B<order> and the B<cofactor>. The B<generator> is a well defined point on the
 curve chosen for cryptographic operations. Integers used for point multiplications will be between 0 and
-n-1 where n is the B<order>. The B<order> multipied by the B<cofactor> gives the number of points on the curve.
+n-1 where n is the B<order>. The B<order> multiplied by the B<cofactor> gives the number of points on the curve.
 
 EC_GROUP_get0_generator returns the generator for the identified B<group>.
 
@@ -82,7 +82,7 @@ previous versions of OpenSSL the value 0 must be used instead. Before OpenSSL
 applications would have to explicitly set the named curve form) in OpenSSL
 1.1.0 and later the named curve form is the default.
 
-The point_coversion_form for a curve controls how EC_POINT data is encoded as ASN1 as defined in X9.62 (ECDSA).
+The point_conversion_form for a curve controls how EC_POINT data is encoded as ASN1 as defined in X9.62 (ECDSA).
 point_conversion_form_t is an enum defined as follows: 
 
  typedef enum {
@@ -143,7 +143,7 @@ or a pentanomial of the form:
 f(x) = x^m + x^k3 + x^k2 + x^k1 + 1 with m > k3 > k2 > k1 >= 1
 
 The function EC_GROUP_get_basis_type returns a NID identifying whether a trinomial or pentanomial is in use for the field. The
-function EC_GROUP_get_trinomial_basis must only be called where f(x) is of the trinomial form, and returns the value of B<k>. Similary
+function EC_GROUP_get_trinomial_basis must only be called where f(x) is of the trinomial form, and returns the value of B<k>. Similarly
 the function EC_GROUP_get_pentanomial_basis must only be called where f(x) is of the pentanomial form, and returns the values of B<k1>,
 B<k2> and B<k3> respectively.
 

doc/crypto/EC_GROUP_new.pod

@@ -48,8 +48,8 @@ EC_GROUP_set_curve_GFp sets the curve parameters B<p>, B<a> and B<b> for a curve
 EC_group_get_curve_GFp obtains the previously set curve parameters.
 
 EC_GROUP_set_curve_GF2m sets the equivalent curve parameters for a curve over F2^m. In this case B<p> represents
-the irreducible polybnomial - each bit represents a term in the polynomial. Therefore there will either be three
-or five bits set dependant on whether the polynomial is a trinomial or a pentanomial.
+the irreducible polynomial - each bit represents a term in the polynomial. Therefore there will either be three
+or five bits set dependent on whether the polynomial is a trinomial or a pentanomial.
 EC_group_get_curve_GF2m obtains the previously set curve parameters.
 
 The functions EC_GROUP_new_curve_GFp and EC_GROUP_new_curve_GF2m are shortcuts for calling EC_GROUP_new and the

doc/crypto/EC_KEY_new.pod

@@ -38,7 +38,7 @@ EC_KEY_new, EC_KEY_get_flags, EC_KEY_set_flags, EC_KEY_clear_flags, EC_KEY_new_b
 
 =head1 DESCRIPTION
 
-An EC_KEY represents a public key and (optionaly) an associated private key. A new EC_KEY (with no associated curve) can be constructed by calling EC_KEY_new.
+An EC_KEY represents a public key and (optionally) an associated private key. A new EC_KEY (with no associated curve) can be constructed by calling EC_KEY_new.
 The reference count for the newly created EC_KEY is initially set to 1. A curve can be associated with the EC_KEY by calling
 EC_KEY_set_group.
 
@@ -71,7 +71,7 @@ The functions EC_KEY_get0_group, EC_KEY_set_group, EC_KEY_get0_private_key, EC_K
 The functions EC_KEY_get_conv_form and EC_KEY_set_conv_form get and set the point_conversion_form for the B<key>. For a description
 of point_conversion_forms please refer to L<EC_POINT_new(3)|EC_POINT_new(3)>.
 
-EC_KEY_insert_key_method_data and EC_KEY_get_key_method_data enable the caller to associate arbitary additional data specific to the
+EC_KEY_insert_key_method_data and EC_KEY_get_key_method_data enable the caller to associate arbitrary additional data specific to the
 elliptic curve scheme being used with the EC_KEY object. This data is treated as a "black box" by the ec library. The data to be stored by EC_KEY_insert_key_method_data is provided in the B<data> parameter, which must have have associated functions for duplicating, freeing and "clear_freeing" the data item. If a subsequent EC_KEY_get_key_method_data call is issued, the functions for duplicating, freeing and "clear_freeing" the data item must be provided again, and they must be the same as they were when the data item was inserted.
 
 EC_KEY_set_flags sets the flags in the B<flags> parameter on the EC_KEY object. Any flags that are already set are left set. The currently defined standard flags are EC_FLAG_NON_FIPS_ALLOW and EC_FLAG_FIPS_CHECKED. In addition there is the flag EC_FLAG_COFACTOR_ECDH which is specific to ECDH and is defined in ecdh.h. EC_KEY_get_flags returns the current flags that are set for this EC_KEY. EC_KEY_clear_flags clears the flags indicated by the B<flags> parameter. All other flags are left in their existing state.

doc/crypto/EVP_BytesToKey.pod

@@ -29,7 +29,7 @@ A typical application of this function is to derive keying material for an
 encryption algorithm from a password in the B<data> parameter.
 
 Increasing the B<count> parameter slows down the algorithm which makes it
-harder for an attacker to peform a brute force attack using a large number
+harder for an attacker to perform a brute force attack using a large number
 of candidate passwords.
 
 If the total key and IV length is less than the digest length and
@@ -46,7 +46,7 @@ enough data is available for the key and IV. D_i is defined as:
 
 	D_i = HASH^count(D_(i-1) || data || salt)
 
-where || denotes concatentaion, D_0 is empty, HASH is the digest
+where || denotes concatenation, D_0 is empty, HASH is the digest
 algorithm in use, HASH^1(data) is simply HASH(data), HASH^2(data)
 is HASH(HASH(data)) and so on.
 

doc/crypto/EVP_DigestInit.pod

@@ -74,7 +74,7 @@ EVP_MD_CTX_create() allocates, initializes and returns a digest context.
 
 EVP_DigestInit_ex() sets up digest context B<ctx> to use a digest
 B<type> from ENGINE B<impl>. B<ctx> must be initialized before calling this
-function. B<type> will typically be supplied by a functionsuch as EVP_sha1().
+function. B<type> will typically be supplied by a function such as EVP_sha1().
 If B<impl> is NULL then the default implementation of digest B<type> is used.
 
 EVP_DigestUpdate() hashes B<cnt> bytes of data at B<d> into the

doc/crypto/EVP_DigestSignInit.pod

@@ -26,7 +26,7 @@ be used to set alternative signing options.
 EVP_DigestSignUpdate() hashes B<cnt> bytes of data at B<d> into the
 signature context B<ctx>. This function can be called several times on the
 same B<ctx> to include additional data. This function is currently implemented
-usig a macro.
+using a macro.
 
 EVP_DigestSignFinal() signs the data in B<ctx> places the signature in B<sig>.
 If B<sig> is B<NULL> then the maximum size of the output buffer is written to

doc/crypto/EVP_PKEY_CTX_ctrl.pod

@@ -89,7 +89,7 @@ B<PSS> block structure. If this macro is not called a salt length value of -2
 is used by default.
 
 The EVP_PKEY_CTX_set_rsa_rsa_keygen_bits() macro sets the RSA key length for
-RSA key genration to B<bits>. If not specified 1024 bits is used.
+RSA key generation to B<bits>. If not specified 1024 bits is used.
 
 The EVP_PKEY_CTX_set_rsa_keygen_pubexp() macro sets the public exponent value
 for RSA key generation to B<pubexp> currently it should be an odd integer. The

doc/crypto/EVP_PKEY_CTX_new.pod

@@ -21,7 +21,7 @@ the algorithm specified in B<pkey> and ENGINE B<e>.
 The EVP_PKEY_CTX_new_id() function allocates public key algorithm context
 using the algorithm specified by B<id> and ENGINE B<e>. It is normally used
 when no B<EVP_PKEY> structure is associated with the operations, for example
-during parameter generation of key genration for some algorithms.
+during parameter generation of key generation for some algorithms.
 
 EVP_PKEY_CTX_dup() duplicates the context B<ctx>.
 

doc/crypto/EVP_PKEY_keygen.pod

@@ -26,7 +26,7 @@ EVP_PKEY_keygen_init, EVP_PKEY_keygen, EVP_PKEY_paramgen_init, EVP_PKEY_paramgen
 =head1 DESCRIPTION
 
 The EVP_PKEY_keygen_init() function initializes a public key algorithm
-context using key B<pkey> for a key genration operation.
+context using key B<pkey> for a key generation operation.
 
 The EVP_PKEY_keygen() function performs a key generation operation, the 
 generated key is written to B<ppkey>.
@@ -44,7 +44,7 @@ parameters available is returned. Any non negative value returns the value of
 that parameter. EVP_PKEY_CTX_gen_keygen_info() with a non-negative value for
 B<idx> should only be called within the generation callback.
 
-If the callback returns 0 then the key genration operation is aborted and an
+If the callback returns 0 then the key generation operation is aborted and an
 error occurs. This might occur during a time consuming operation where
 a user clicks on a "cancel" button.
 
@@ -64,7 +64,7 @@ once on the same context if several operations are performed using the same
 parameters.
 
 The meaning of the parameters passed to the callback will depend on the
-algorithm and the specifiic implementation of the algorithm. Some might not
+algorithm and the specific implementation of the algorithm. Some might not
 give any useful information at all during key or parameter generation. Others
 might not even call the callback.
 

doc/crypto/OBJ_nid2obj.pod

@@ -46,7 +46,7 @@ for the object B<o>, the long name <ln> or the short name <sn> respectively
 or NID_undef if an error occurred.
 
 OBJ_txt2nid() returns NID corresponding to text string <s>. B<s> can be
-a long name, a short name or the numerical respresentation of an object.
+a long name, a short name or the numerical representation of an object.
 
 OBJ_txt2obj() converts the text string B<s> into an ASN1_OBJECT structure.
 If B<no_name> is 0 then long names and short names will be interpreted
@@ -104,7 +104,7 @@ Objects do not need to be in the internal tables to be processed,
 the functions OBJ_txt2obj() and OBJ_obj2txt() can process the numerical
 form of an OID.
 
-Some objects are used to reprsent algorithms which do not have a
+Some objects are used to represent algorithms which do not have a
 corresponding ASN.1 OBJECT IDENTIFIER encoding (for example no OID currently
 exists for a particular algorithm). As a result they B<cannot> be encoded or
 decoded as part of ASN.1 structures. Applications can determine if there

doc/crypto/PKCS12_create.pod

@@ -16,7 +16,7 @@ PKCS12_create - create a PKCS#12 structure
 PKCS12_create() creates a PKCS#12 structure.
 
 B<pass> is the passphrase to use. B<name> is the B<friendlyName> to use for
-the supplied certifictate and key. B<pkey> is the private key to include in
+the supplied certificate and key. B<pkey> is the private key to include in
 the structure and B<cert> its corresponding certificates. B<ca>, if not B<NULL>
 is an optional set of certificates to also include in the structure.
 
@@ -56,7 +56,7 @@ used for the corresponding B<friendlyName> or B<localKeyID> in the
 PKCS12 structure.
 
 Either B<pkey>, B<cert> or both can be B<NULL> to indicate that no key or
-certficate is required. In previous versions both had to be present or
+certificate is required. In previous versions both had to be present or
 a fatal error is returned.
 
 B<nid_key> or B<nid_cert> can be set to -1 indicating that no encryption

doc/crypto/PKCS5_PBKDF2_HMAC.pod

@@ -49,7 +49,7 @@ encryption algorithm from a password in the B<pass>, a salt in B<salt>,
 and an iteration count.
 
 Increasing the B<iter> parameter slows down the algorithm which makes it
-harder for an attacker to peform a brute force attack using a large number
+harder for an attacker to perform a brute force attack using a large number
 of candidate passwords.
 
 =head1 RETURN VALUES

doc/crypto/PKCS7_sign.pod

@@ -13,7 +13,7 @@ PKCS7_sign - create a PKCS#7 signedData structure
 =head1 DESCRIPTION
 
 PKCS7_sign() creates and returns a PKCS#7 signedData structure. B<signcert> is
-the certificate to sign with, B<pkey> is the corresponsding private key.
+the certificate to sign with, B<pkey> is the corresponding private key.
 B<certs> is an optional additional set of certificates to include in the PKCS#7
 structure (for example any intermediate CAs in the chain). 
 

doc/crypto/PKCS7_sign_add_signer.pod

@@ -40,7 +40,7 @@ Any of the following flags (ored together) can be passed in the B<flags>
 parameter.
 
 If B<PKCS7_REUSE_DIGEST> is set then an attempt is made to copy the content
-digest value from the PKCS7 struture: to add a signer to an existing structure.
+digest value from the PKCS7 structure: to add a signer to an existing structure.
 An error occurs if a matching digest value cannot be found to copy. The
 returned PKCS7 structure will be valid and finalized when this flag is set.
 

doc/crypto/PKCS7_verify.pod

@@ -16,7 +16,7 @@ PKCS7_verify, PKCS7_get0_signers - verify a PKCS#7 signedData structure
 
 PKCS7_verify() verifies a PKCS#7 signedData structure. B<p7> is the PKCS7
 structure to verify. B<certs> is a set of certificates in which to search for
-the signer's certificate. B<store> is a trusted certficate store (used for
+the signer's certificate. B<store> is a trusted certificate store (used for
 chain verification). B<indata> is the signed data if the content is not
 present in B<p7> (that is it is detached). The content is written to B<out>
 if it is not NULL.

doc/crypto/SMIME_write_PKCS7.pod

@@ -40,7 +40,7 @@ the data must be read twice: once to compute the signature in PKCS7_sign()
 and once to output the S/MIME message.
 
 If streaming is performed the content is output in BER format using indefinite
-length constructuted encoding except in the case of signed data with detached
+length constructed encoding except in the case of signed data with detached
 content where the content is absent and DER format is used.
 
 =head1 BUGS

doc/crypto/X509_NAME_get_index_by_NID.pod

@@ -51,7 +51,7 @@ X509_NAME_get_text_by_NID() and X509_NAME_get_text_by_OBJ() are
 legacy functions which have various limitations which make them
 of minimal use in practice. They can only find the first matching
 entry and will copy the contents of the field verbatim: this can
-be highly confusing if the target is a muticharacter string type
+be highly confusing if the target is a multicharacter string type
 like a BMPString or a UTF8String.
 
 For a more general solution X509_NAME_get_index_by_NID() or

doc/crypto/X509_STORE_CTX_get_error.pod

@@ -55,7 +55,7 @@ X509_STORE_CTX_get_error() returns B<X509_V_OK> or an error code.
 
 X509_STORE_CTX_get_error_depth() returns a non-negative error depth.
 
-X509_STORE_CTX_get_current_cert() returns the cerificate which caused the
+X509_STORE_CTX_get_current_cert() returns the certificate which caused the
 error or B<NULL> if no certificate is relevant to the error.
 
 X509_verify_cert_error_string() returns a human readable error string for

doc/crypto/X509_STORE_CTX_new.pod

@@ -49,7 +49,7 @@ X509_STORE_CTX_trusted_stack() sets the set of trusted certificates of B<ctx>
 to B<sk>. This is an alternative way of specifying trusted certificates 
 instead of using an B<X509_STORE>.
 
-X509_STORE_CTX_set_cert() sets the certificate to be vertified in B<ctx> to
+X509_STORE_CTX_set_cert() sets the certificate to be verified in B<ctx> to
 B<x>.
 
 X509_STORE_CTX_set_chain() sets the additional certificate chain used by B<ctx>
@@ -61,10 +61,10 @@ enabled in the associated B<X509_VERIFY_PARAM> structure. This might be
 used where additional "useful" CRLs are supplied as part of a protocol,
 for example in a PKCS#7 structure.
 
-X509_VERIFY_PARAM *X509_STORE_CTX_get0_param() retrieves an intenal pointer
+X509_VERIFY_PARAM *X509_STORE_CTX_get0_param() retrieves an internal pointer
 to the verification parameters associated with B<ctx>.
 
-X509_STORE_CTX_set0_param() sets the intenal verification parameter pointer
+X509_STORE_CTX_set0_param() sets the internal verification parameter pointer
 to B<param>. After this call B<param> should not be used.
 
 X509_STORE_CTX_set_default() looks up and sets the default verification

doc/crypto/X509_VERIFY_PARAM_set_flags.pod

@@ -89,7 +89,7 @@ with the DANE-EE(3) certificate usage, and the internal check will
 be suppressed as appropriate when DANE support is added to OpenSSL.
 
 X509_VERIFY_PARAM_add1_host() adds B<name> as an additional reference
-identifer that can match the peer's certificate.  Any previous names
+identifier that can match the peer's certificate.  Any previous names
 set via X509_VERIFY_PARAM_set1_host() or X509_VERIFY_PARAM_add1_host()
 are retained, no change is made if B<name> is NULL or empty.  When
 multiple names are configured, the peer is considered verified when
@@ -157,13 +157,13 @@ ignored. B<WARNING> setting this option for anything other than debugging
 purposes can be a security risk. Finer control over which extensions are
 supported can be performed in the verification callback.
 
-THe B<X509_V_FLAG_X509_STRICT> flag disables workarounds for some broken
+The B<X509_V_FLAG_X509_STRICT> flag disables workarounds for some broken
 certificates and makes the verification strictly apply B<X509> rules.
 
 B<X509_V_FLAG_ALLOW_PROXY_CERTS> enables proxy certificate verification.
 
 B<X509_V_FLAG_POLICY_CHECK> enables certificate policy checking, by default
-no policy checking is peformed. Additional information is sent to the 
+no policy checking is performed. Additional information is sent to the
 verification callback relating to policy checking.
 
 B<X509_V_FLAG_EXPLICIT_POLICY>, B<X509_V_FLAG_INHIBIT_ANY> and
@@ -181,11 +181,11 @@ By default some additional features such as indirect CRLs and CRLs signed by
 different keys are disabled. If B<X509_V_FLAG_EXTENDED_CRL_SUPPORT> is set
 they are enabled.
 
-If B<X509_V_FLAG_USE_DELTAS> ise set delta CRLs (if present) are used to
+If B<X509_V_FLAG_USE_DELTAS> is set delta CRLs (if present) are used to
 determine certificate status. If not set deltas are ignored.
 
 B<X509_V_FLAG_CHECK_SS_SIGNATURE> enables checking of the root CA self signed
-cerificate signature. By default this check is disabled because it doesn't
+certificate signature. By default this check is disabled because it doesn't
 add any additional security but in some cases applications might want to
 check the signature anyway. A side effect of not checking the root CA
 signature is that disabled or unsupported message digests on the root CA

doc/crypto/X509_check_host.pod

@@ -91,7 +91,7 @@ expansion; this only applies to B<X509_check_host>.
 
 If set, B<X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS> suppresses support
 for "*" as wildcard pattern in labels that have a prefix or suffix,
-such as: "www*" or "*www"; this only aplies to B<X509_check_host>.
+such as: "www*" or "*www"; this only applies to B<X509_check_host>.
 
 If set, B<X509_CHECK_FLAG_MULTI_LABEL_WILDCARDS> allows a "*" that
 constitutes the complete label of a DNS name (e.g. "*.example.com")

doc/crypto/X509_verify_cert.pod

@@ -2,7 +2,7 @@
 
 =head1 NAME
 
-X509_verify_cert - discover and verify X509 certificte chain
+X509_verify_cert - discover and verify X509 certificate chain
 
 =head1 SYNOPSIS
 

doc/crypto/d2i_ASN1_OBJECT.pod

@@ -15,7 +15,7 @@ d2i_ASN1_OBJECT, i2d_ASN1_OBJECT - ASN1 OBJECT IDENTIFIER functions
 
 These functions decode and encode an ASN1 OBJECT IDENTIFIER.
 
-Othewise these behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise these behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/d2i_DHparams.pod

@@ -16,7 +16,7 @@ d2i_DHparams, i2d_DHparams - PKCS#3 DH parameter functions.
 These functions decode and encode PKCS#3 DH parameters using the
 DHparameter structure described in PKCS#3.
 
-Othewise these behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise these behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/d2i_DSAPublicKey.pod

@@ -68,7 +68,7 @@ If B<write_params> is zero then only the B<pub_key> field is encoded as an
 B<INTEGER>. If B<write_params> is 1 then a B<SEQUENCE> consisting of the
 B<p>, B<q>, B<g> and B<pub_key> respectively fields are encoded.
 
-The B<DSAPrivateKey> functions also use a non standard structure consiting
+The B<DSAPrivateKey> functions also use a non standard structure consisting
 consisting of a SEQUENCE containing the B<p>, B<q>, B<g> and B<pub_key> and
 B<priv_key> fields respectively.
 

doc/crypto/d2i_X509_ALGOR.pod

@@ -16,7 +16,7 @@ d2i_X509_ALGOR, i2d_X509_ALGOR - AlgorithmIdentifier functions.
 These functions decode and encode an B<X509_ALGOR> structure which is
 equivalent to the B<AlgorithmIdentifier> structure.
 
-Othewise these behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise these behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/d2i_X509_CRL.pod

@@ -23,7 +23,7 @@ i2d_X509_CRL_bio, i2d_X509_CRL_fp - PKCS#10 certificate request functions.
 These functions decode and encode an X509 CRL (certificate revocation
 list).
 
-Othewise the functions behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise the functions behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/d2i_X509_NAME.pod

@@ -17,7 +17,7 @@ These functions decode and encode an B<X509_NAME> structure which is the
 the same as the B<Name> type defined in RFC2459 (and elsewhere) and used
 for example in certificate subject and issuer names.
 
-Othewise the functions behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise the functions behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/d2i_X509_REQ.pod

@@ -22,7 +22,7 @@ i2d_X509_REQ_bio, i2d_X509_REQ_fp - PKCS#10 certificate request functions.
 
 These functions decode and encode a PKCS#10 certificate request.
 
-Othewise these behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise these behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/d2i_X509_SIG.pod

@@ -16,7 +16,7 @@ d2i_X509_SIG, i2d_X509_SIG - DigestInfo functions.
 These functions decode and encode an X509_SIG structure which is
 equivalent to the B<DigestInfo> structure defined in PKCS#1 and PKCS#7.
 
-Othewise these behave in a similar way to d2i_X509() and i2d_X509()
+Otherwise these behave in a similar way to d2i_X509() and i2d_X509()
 described in the L<d2i_X509(3)|d2i_X509(3)> manual page.
 
 =head1 SEE ALSO

doc/crypto/ec.pod

@@ -184,7 +184,7 @@ The creation and destruction of B<EC_GROUP> objects is described in L<EC_GROUP_n
 manipulating B<EC_GROUP> objects are described in L<EC_GROUP_copy(3)|EC_GROUP_copy(3)>.
 
 Functions for creating, destroying and manipulating B<EC_POINT> objects are explained in L<EC_POINT_new(3)|EC_POINT_new(3)>,
-whilst functions for performing mathematical operations and tests on B<EC_POINTs> are coverd in L<EC_POINT_add(3)|EC_POINT_add(3)>.
+whilst functions for performing mathematical operations and tests on B<EC_POINTs> are covered in L<EC_POINT_add(3)|EC_POINT_add(3)>.
 
 For working with private and public keys refer to L<EC_KEY_new(3)|EC_KEY_new(3)>. Implementations are covered in
 L<EC_GFp_simple_method(3)|EC_GFp_simple_method(3)>.

doc/crypto/engine.pod

@@ -576,7 +576,7 @@ for any higher-level ENGINE functions such as ENGINE_ctrl_cmd_string().
 by applications, administrations, users, etc. These can support arbitrary
 operations via ENGINE_ctrl(), including passing to and/or from the control
 commands data of any arbitrary type. These commands are supported in the
-discovery mechanisms simply to allow applications determinie if an ENGINE
+discovery mechanisms simply to allow applications to determine if an ENGINE
 supports certain specific commands it might want to use (eg. application "foo"
 might query various ENGINEs to see if they implement "FOO_GET_VENDOR_LOGO_GIF" -
 and ENGINE could therefore decide whether or not to support this "foo"-specific

doc/crypto/err.pod

@@ -46,7 +46,7 @@ err - error codes
 
 =head1 DESCRIPTION
 
-When a call to the OpenSSL library fails, this is usually signalled
+When a call to the OpenSSL library fails, this is usually signaled
 by the return value, and an error code is stored in an error queue
 associated with the current thread. The B<err> library provides
 functions to obtain these error codes and textual error messages.

doc/fingerprints.txt

@@ -1,4 +1,4 @@
-Fingerprints for Signing Relases
+Fingerprints for Signing Releases
 
 OpenSSL releases are signed with PGP/GnuPG keys.  This file contains
 the fingerprints of team members who are "authorized" to sign the