From 291e94df90aa085ae53b43e52e1cef02efc0ff10 Mon Sep 17 00:00:00 2001 From: Richard Levitte Date: Mon, 18 May 2015 22:35:23 +0200 Subject: [PATCH] Refactor file writing - introduce template driven file writing apps/CA.pl and tools/c_rehash are built from template files. So far, this was done by Configure, which created its own problems as it forced everyone to reconfigure just because one of the template files had changed. Instead, have those files created as part of the normal build in apps/ and in tools/. Furthermore, this prepares for a future where Configure may produce entirely other build files than Makefile, and the latter can't be guaranteed to be the holder of all information for other scripts. Instead, configdata.pm (described below) becomes the center of configuration information. This introduces a few new things: %config a hash table to hold all kinds of configuration data that can be used by any other script. configdata.pm a perl module that Configure writes. It currently holds the hash tables %config and %target. util/dofile.pl a script that takes a template on STDIN and outputs the result after applying configuration data on it. It's supposed to be called like this: perl -I$(TOP) -Mconfigdata < template > result or perl -I$(TOP) -Mconfigdata templ1 templ2 ... > result Note: util/dofile.pl requires Text::Template. As part of this changed, remove a number of variables that are really just copies of entries in %target, and use %target directly. The exceptions are $target{cflags} and $target{lflags}, they do get copied to $cflags and $lflags. The reason for this is that those variable potentially go through a lot of changes and would rather deserve a place in %config. That, however, is for another commit. Reviewed-by: Rich Salz Reviewed-by: Richard Levitte --- .gitignore | 1 + Configure | 502 +++++++++++++++++++++++++++------------------- apps/CA.pl.in | 2 +- apps/Makefile.in | 5 + tools/Makefile.in | 8 +- tools/c_rehash.in | 6 +- util/dofile.pl | 99 +++++++++ 7 files changed, 413 insertions(+), 210 deletions(-) create mode 100644 util/dofile.pl diff --git a/.gitignore b/.gitignore index 281905b63f..0a3f054a1e 100644 --- a/.gitignore +++ b/.gitignore @@ -21,6 +21,7 @@ /makefile.* /out.* /tmp.* +/configdata.pm **/Makefile diff --git a/Configure b/Configure index 0a6d812a37..45103ff063 100755 --- a/Configure +++ b/Configure @@ -150,6 +150,7 @@ my $apitable = { my $base_target = "BASE"; # The template that all other inherit from our %table = (); +our %config = (); # Forward declarations ############################################### @@ -172,9 +173,11 @@ foreach (sort glob($pattern) ) { &read_config($_); } -my $prefix=""; + +$config{perl}; +$config{prefix}=""; +$config{openssldir}=""; my $libdir=""; -my $openssldir=""; my $exe_ext=""; my $install_prefix= "$ENV{'INSTALL_PREFIX'}"; my $cross_compile_prefix=""; @@ -192,7 +195,6 @@ my @skip=(); my $Makefile="Makefile"; my $processor=""; my $default_ranlib; -my $perl; my $fips=0; # Known TLS and DTLS protocols @@ -539,7 +541,7 @@ foreach (@argvcopy) { if (/^--prefix=(.*)$/) { - $prefix=$1; + $config{prefix}=$1; } elsif (/^--api=(.*)$/) { @@ -551,7 +553,7 @@ foreach (@argvcopy) } elsif (/^--openssldir=(.*)$/) { - $openssldir=$1; + $config{openssldir}=$1; } elsif (/^--install.prefix=(.*)$/) { @@ -750,7 +752,7 @@ if ($d) { $target = $t; } } - +$config{target} = $target; delete $table{$base_target}->{template}; # or the next test will fail. my %target = ( %{$table{$base_target}}, resolve_config($target) ); @@ -760,21 +762,20 @@ $exe_ext=".exe" if ($target eq "Cygwin" || $target eq "DJGPP" || $target =~ /^mi $exe_ext=".nlm" if ($target =~ /netware/); $exe_ext=".pm" if ($target =~ /vos/); -$default_ranlib= &which("ranlib") or $default_ranlib="true"; -$perl=$ENV{'PERL'} or $perl=&which("perl5") or $perl=&which("perl") - or $perl="perl"; -my $make = $ENV{'MAKE'} || "make"; +$default_ranlib = which("ranlib") || "true"; +$config{perl} = $ENV{'PERL'} || which("perl5") || which("perl") || "perl"; +my $make = $ENV{'MAKE'} || "make"; $cross_compile_prefix=$ENV{'CROSS_COMPILE'} if $cross_compile_prefix eq ""; -$prefix = "/usr/local" if !$prefix; -$openssldir = "ssl" if !$openssldir; -$openssldir = catdir($prefix, $openssldir) - unless file_name_is_absolute($openssldir); +$config{prefix} = "/usr/local" if !$config{prefix}; +$config{openssldir} = "ssl" if !$config{openssldir}; +$config{openssldir} = catdir($config{prefix}, $config{openssldir}) + unless file_name_is_absolute($config{openssldir}); # Allow environment CC to override compiler... -my $cc = $ENV{CC} || $target{cc}; +$target{cc} = $ENV{CC} || $target{cc}; # For cflags and lflags, add the debug_ or release_ attributes # Do it in such a way that no spurious space is appended (hence the grep). @@ -785,49 +786,19 @@ my $lflags = join(" ", grep { $_ } ($target{lflags}, $target{$build_prefix."lflags"})); -my $unistd = $target{unistd}; -my $thread_cflag = $target{thread_cflag}; -my $sys_id = $target{sys_id}; -my $bn_ops = $target{bn_ops}; -my $cpuid_obj = $target{cpuid_obj}; -my $bn_obj = $target{bn_obj}; -my $ec_obj = $target{ec_obj}; -my $des_obj = $target{des_obj}; -my $aes_obj = $target{aes_obj}; -my $bf_obj = $target{bf_obj}; -my $md5_obj = $target{md5_obj}; -my $sha1_obj = $target{sha1_obj}; -my $cast_obj = $target{cast_obj}; -my $rc4_obj = $target{rc4_obj}; -my $rmd160_obj = $target{rmd160_obj}; -my $rc5_obj = $target{rc5_obj}; -my $wp_obj = $target{wp_obj}; -my $cmll_obj = $target{cmll_obj}; -my $modes_obj = $target{modes_obj}; -my $engines_obj = $target{engines_obj}; -my $chacha_obj = $target{chacha_obj}; -my $poly1305_obj = $target{poly1305_obj}; -my $perlasm_scheme = $target{perlasm_scheme}; -my $dso_scheme = $target{dso_scheme}; -my $shared_target = $target{shared_target}; -my $shared_cflag = $target{shared_cflag}; -my $shared_ldflag = $target{shared_ldflag}; -my $shared_extension = $target{shared_extension}; -my $ranlib = $ENV{'RANLIB'} || $target{ranlib}; -my $ar = $ENV{'AR'} || "ar"; -my $arflags = $target{arflags}; -my $multilib = $target{multilib}; -my @build_scheme = - ref($target{build_scheme}) eq "ARRAY" - ? @{$target{build_scheme}} : ( $target{build_scheme} ); +$target{ranlib} = $ENV{'RANLIB'} || $target{ranlib} || $default_ranlib; +$target{ar} = $ENV{'AR'} || "ar"; +# Make sure build_scheme is consistent. +$target{build_scheme} = [ $target{build_scheme} ] + if ref($target{build_scheme}) ne "ARRAY"; -# if $prefix/lib$multilib is not an existing directory, then +# if $config{prefix}/lib$target{multilib} is not an existing directory, then # assume that it's not searched by linker automatically, in -# which case adding $multilib suffix causes more grief than +# which case adding $target{multilib} suffix causes more grief than # we're ready to tolerate, so don't... -$multilib="" if !-d "$prefix/lib$multilib"; +$target{multilib}="" if !-d "$config{prefix}/lib$target{multilib}"; -$libdir="lib$multilib" if $libdir eq ""; +$libdir="lib$target{multilib}" if $libdir eq ""; $cflags = "$cflags$exp_cflags"; @@ -836,10 +807,10 @@ my ($prelflags,$postlflags)=split('%',$lflags); if (defined($postlflags)) { $lflags=$postlflags; } else { $lflags=$prelflags; undef $prelflags; } -if ($target =~ /^mingw/ && `$cc --target-help 2>&1` !~ m/\-mno\-cygwin/m) +if ($target =~ /^mingw/ && `$target{cc} --target-help 2>&1` !~ m/\-mno\-cygwin/m) { $cflags =~ s/\-mno\-cygwin\s*//; - $shared_ldflag =~ s/\-mno\-cygwin\s*//; + $target{shared_ldflag} =~ s/\-mno\-cygwin\s*//; } if ($target =~ /linux.*\-mips/ && !$no_asm && $flags !~ /\-m(ips|arch=)/) { @@ -861,32 +832,32 @@ else { $no_user_cflags=1; } # by a define "DSO_" ... we translate the "dso_scheme" config # string entry into using the following logic; my $dso_cflags; -if (!$no_dso && $dso_scheme ne "") +if (!$no_dso && $target{dso_scheme} ne "") { - $dso_scheme =~ tr/[a-z]/[A-Z]/; - if ($dso_scheme eq "DLFCN") + $target{dso_scheme} =~ tr/[a-z]/[A-Z]/; + if ($target{dso_scheme} eq "DLFCN") { $dso_cflags = "-DDSO_DLFCN -DHAVE_DLFCN_H"; } - elsif ($dso_scheme eq "DLFCN_NO_H") + elsif ($target{dso_scheme} eq "DLFCN_NO_H") { $dso_cflags = "-DDSO_DLFCN"; } else { - $dso_cflags = "-DDSO_$dso_scheme"; + $dso_cflags = "-DDSO_$target{dso_scheme}"; } $cflags = "$dso_cflags $cflags"; } my $thread_cflags; my $thread_defines; -if ($thread_cflag ne "(unknown)" && !$no_threads) +if ($target{thread_cflag} ne "(unknown)" && !$no_threads) { # If we know how to do it, support threads by default. $threads = 1; } -if ($thread_cflag eq "(unknown)" && $threads) +if ($target{thread_cflag} eq "(unknown)" && $threads) { # If the user asked for "threads", [s]he is also expected to # provide any system-dependent compiler options that are @@ -902,10 +873,10 @@ if ($thread_cflag eq "(unknown)" && $threads) } else { - $thread_cflags="-DOPENSSL_THREADS $thread_cflag $cflags"; + $thread_cflags="-DOPENSSL_THREADS $target{thread_cflag} $cflags"; $thread_defines .= "#define OPENSSL_THREADS\n"; # my $def; -# foreach $def (split ' ',$thread_cflag) +# foreach $def (split ' ',$target{thread_cflag}) # { # if ($def =~ s/^-D// && $def !~ /^_/) # { @@ -955,20 +926,20 @@ if (defined($disabled{"deprecated"})) { # You will find shlib_mark1 and shlib_mark2 explained in Makefile.in my $shared_mark = ""; -if ($shared_target eq "") +if ($target{shared_target} eq "") { $no_shared_warn = 1 if !$no_shared && !$fips; $no_shared = 1; } if (!$no_shared) { - if ($shared_cflag ne "") + if ($target{shared_cflag} ne "") { - $cflags = "$shared_cflag -DOPENSSL_PIC $cflags"; + $cflags = "$target{shared_cflag} -DOPENSSL_PIC $cflags"; } } -if ($build_scheme[0] ne "mk1mf") +if ($target{build_scheme}->[0] ne "mk1mf") { # add {no-}static-engine to options to allow mkdef.pl to work without extra arguments if ($no_shared) @@ -989,7 +960,7 @@ if ($build_scheme[0] ne "mk1mf") if ($target =~ /\-icc$/) # Intel C compiler { my $iccver=0; - if (open(FD,"$cc -V 2>&1 |")) + if (open(FD,"$target{cc} -V 2>&1 |")) { while() { $iccver=$1 if (/Version ([0-9]+)\./); } close(FD); @@ -1028,80 +999,80 @@ if ($target =~ /\-icc$/) # Intel C compiler # linker only when --prefix is not /usr. if ($target =~ /^BSD\-/) { - $shared_ldflag.=" -Wl,-rpath,\$\$(LIBRPATH)" if ($prefix !~ m|^/usr[/]*$|); + $target{shared_ldflag}.=" -Wl,-rpath,\$\$(LIBRPATH)" if ($config{prefix} !~ m|^/usr[/]*$|); } -if ($sys_id ne "") +if ($target{sys_id} ne "") { - #$cflags="-DOPENSSL_SYS_$sys_id $cflags"; - $openssl_sys_defines="#define OPENSSL_SYS_$sys_id\n"; + #$cflags="-DOPENSSL_SYS_$target{sys_id} $cflags"; + $openssl_sys_defines="#define OPENSSL_SYS_$target{sys_id}\n"; } -if ($ranlib eq "") +if ($target{ranlib} eq "") { - $ranlib = $default_ranlib; + $target{ranlib} = $default_ranlib; } if (!$no_asm) { - $cpuid_obj=$table{BASE}->{cpuid_obj} if ($processor eq "386"); - $cpuid_obj.=" uplink.o uplink-x86.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/); + $target{cpuid_obj}=$table{BASE}->{cpuid_obj} if ($processor eq "386"); + $target{cpuid_obj}.=" uplink.o uplink-x86.o" if ($cflags =~ /\-DOPENSSL_USE_APPLINK/); - $bn_obj =~ s/\w+-gf2m.o// if (defined($disabled{ec2m})); + $target{bn_obj} =~ s/\w+-gf2m.o// if (defined($disabled{ec2m})); # bn-586 is the only one implementing bn_*_part_words - $cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($bn_obj =~ /bn-586/); - $cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $bn_obj =~ /86/); + $cflags.=" -DOPENSSL_BN_ASM_PART_WORDS" if ($target{bn_obj} =~ /bn-586/); + $cflags.=" -DOPENSSL_IA32_SSE2" if (!$no_sse2 && $target{bn_obj} =~ /86/); - $cflags.=" -DOPENSSL_BN_ASM_MONT" if ($bn_obj =~ /-mont/); - $cflags.=" -DOPENSSL_BN_ASM_MONT5" if ($bn_obj =~ /-mont5/); - $cflags.=" -DOPENSSL_BN_ASM_GF2m" if ($bn_obj =~ /-gf2m/); + $cflags.=" -DOPENSSL_BN_ASM_MONT" if ($target{bn_obj} =~ /-mont/); + $cflags.=" -DOPENSSL_BN_ASM_MONT5" if ($target{bn_obj} =~ /-mont5/); + $cflags.=" -DOPENSSL_BN_ASM_GF2m" if ($target{bn_obj} =~ /-gf2m/); if ($fips) { $openssl_other_defines.="#define OPENSSL_FIPS\n"; } - if ($sha1_obj =~ /\.o$/) { - $cflags.=" -DSHA1_ASM" if ($sha1_obj =~ /sx86/ || $sha1_obj =~ /sha1/); - $cflags.=" -DSHA256_ASM" if ($sha1_obj =~ /sha256/); - $cflags.=" -DSHA512_ASM" if ($sha1_obj =~ /sha512/); - if ($sha1_obj =~ /sse2/) { + if ($target{sha1_obj} =~ /\.o$/) { + $cflags.=" -DSHA1_ASM" if ($target{sha1_obj} =~ /sx86/ || $target{sha1_obj} =~ /sha1/); + $cflags.=" -DSHA256_ASM" if ($target{sha1_obj} =~ /sha256/); + $cflags.=" -DSHA512_ASM" if ($target{sha1_obj} =~ /sha512/); + if ($target{sha1_obj} =~ /sse2/) { if ($no_sse2) { - $sha1_obj =~ s/\S*sse2\S+//; + $target{sha1_obj} =~ s/\S*sse2\S+//; } elsif ($cflags !~ /OPENSSL_IA32_SSE2/) { $cflags.=" -DOPENSSL_IA32_SSE2"; } } } - if ($md5_obj =~ /\.o$/) { + if ($target{md5_obj} =~ /\.o$/) { $cflags.=" -DMD5_ASM"; } - $cast_obj=$table{BASE}->{cast_obj} if (!$no_shared); # CAST assembler is not PIC - if ($rmd160_obj =~ /\.o$/) { + $target{cast_obj}=$table{BASE}->{cast_obj} if (!$no_shared); # CAST assembler is not PIC + if ($target{rmd160_obj} =~ /\.o$/) { $cflags.=" -DRMD160_ASM"; } - if ($aes_obj =~ /\.o$/) { - $cflags.=" -DAES_ASM" if ($aes_obj =~ m/\baes\-/);; + if ($target{aes_obj} =~ /\.o$/) { + $cflags.=" -DAES_ASM" if ($target{aes_obj} =~ m/\baes\-/);; # aes-ctr.o is not a real file, only indication that assembler # module implements AES_ctr32_encrypt... - $cflags.=" -DAES_CTR_ASM" if ($aes_obj =~ s/\s*aes\-ctr\.o//); + $cflags.=" -DAES_CTR_ASM" if ($target{aes_obj} =~ s/\s*aes\-ctr\.o//); # aes-xts.o indicates presence of AES_xts_[en|de]crypt... - $cflags.=" -DAES_XTS_ASM" if ($aes_obj =~ s/\s*aes\-xts\.o//); - $aes_obj =~ s/\s*(vpaes|aesni)\-x86\.o//g if ($no_sse2); - $cflags.=" -DVPAES_ASM" if ($aes_obj =~ m/vpaes/); - $cflags.=" -DBSAES_ASM" if ($aes_obj =~ m/bsaes/); + $cflags.=" -DAES_XTS_ASM" if ($target{aes_obj} =~ s/\s*aes\-xts\.o//); + $target{aes_obj} =~ s/\s*(vpaes|aesni)\-x86\.o//g if ($no_sse2); + $cflags.=" -DVPAES_ASM" if ($target{aes_obj} =~ m/vpaes/); + $cflags.=" -DBSAES_ASM" if ($target{aes_obj} =~ m/bsaes/); } - if ($wp_obj =~ /mmx/ && $processor eq "386") { - $wp_obj=$table{BASE}->{wp_obj}; + if ($target{wp_obj} =~ /mmx/ && $processor eq "386") { + $target{wp_obj}=$table{BASE}->{wp_obj}; } elsif (!$disabled{"whirlpool"}) { $cflags.=" -DWHIRLPOOL_ASM"; } - if ($modes_obj =~ /ghash\-/) { + if ($target{modes_obj} =~ /ghash\-/) { $cflags.=" -DGHASH_ASM"; } - if ($ec_obj =~ /ecp_nistz256/) { + if ($target{ec_obj} =~ /ecp_nistz256/) { $cflags.=" -DECP_NISTZ256_ASM"; } - if ($poly1305_obj =~ /\.o$/) { + if ($target{poly1305_obj} =~ /\.o$/) { $cflags.=" -DPOLY1305_ASM"; } } @@ -1148,8 +1119,8 @@ if (defined($api)) { $cflags .= " $apiflag"; } -my $ecc = $cc; -$ecc = "clang" if `$cc --version 2>&1` =~ /clang/; +my $ecc = $target{cc}; +$ecc = "clang" if `$target{cc} --version 2>&1` =~ /clang/; if ($strict_warnings) { @@ -1172,15 +1143,60 @@ if ($strict_warnings) { $cflags .= " $wopt" unless ($cflags =~ /(^|\s)$wopt(\s|$)/) } - if ($target =~ /^BSD-/) - { - $lflags .= " -lexecinfo"; - } - } + if ($target =~ /^BSD-/) + { + $lflags .= " -lexecinfo"; + } + } } -open(IN,"configdata.pm") || die "unable to create configdata.pm: $!\n"; +print OUT <<"EOF"; +package configdata; + +use strict; +use warnings; + +use Exporter; +#use vars qw(\@ISA \@EXPORT); +our \@ISA = qw(Exporter); +our \@EXPORT = qw(\%config \%target); + +EOF +print OUT "our %config = (\n"; +foreach (sort keys %config) { + if (ref($config{$_}) eq "ARRAY") { + print OUT " ", $_, " => [ ", join(", ", + map { quotify("perl", $_) } + @{$config{$_}}), " ],\n"; + } else { + print OUT " ", $_, " => ", quotify("perl", $config{$_}), ",\n" + } +} +print OUT <<"EOF"; +); + +EOF +print OUT "our %target = (\n"; +foreach (sort keys %target) { + if (ref($target{$_}) eq "ARRAY") { + print OUT " ", $_, " => [ ", join(", ", + map { quotify("perl", $_) } + @{$target{$_}}), " ],\n"; + } else { + print OUT " ", $_, " => ", quotify("perl", $target{$_}), ",\n" + } +} +print OUT <<"EOF"; +); + +1; +EOF +close(OUT); + +open(IN,"$Makefile.new") || die "unable to create $Makefile.new:$!\n"; print OUT "### Generated automatically from Makefile.in by Configure.\n\n"; my $sdirs=0; @@ -1206,10 +1222,10 @@ while () s/^SHLIB_VERSION_HISTORY=.*/SHLIB_VERSION_HISTORY=$shlib_version_history/; s/^SHLIB_MAJOR=.*/SHLIB_MAJOR=$shlib_major/; s/^SHLIB_MINOR=.*/SHLIB_MINOR=$shlib_minor/; - s/^SHLIB_EXT=.*/SHLIB_EXT=$shared_extension/; - s/^INSTALLTOP=.*$/INSTALLTOP=$prefix/; - s/^MULTILIB=.*$/MULTILIB=$multilib/; - s/^OPENSSLDIR=.*$/OPENSSLDIR=$openssldir/; + s/^SHLIB_EXT=.*/SHLIB_EXT=$target{shared_extension}/; + s/^INSTALLTOP=.*$/INSTALLTOP=$config{prefix}/; + s/^MULTILIB=.*$/MULTILIB=$target{multilib}/; + s/^OPENSSLDIR=.*$/OPENSSLDIR=$config{openssldir}/; s/^LIBDIR=.*$/LIBDIR=$libdir/; s/^INSTALL_PREFIX=.*$/INSTALL_PREFIX=$install_prefix/; s/^PLATFORM=.*$/PLATFORM=$target/; @@ -1218,45 +1234,45 @@ while () s/^CONFIGURE_ARGS=.*$/CONFIGURE_ARGS=$argvstring/; if ($cross_compile_prefix) { - s/^CC=.*$/CROSS_COMPILE= $cross_compile_prefix\nCC= \$\(CROSS_COMPILE\)$cc/; + s/^CC=.*$/CROSS_COMPILE= $cross_compile_prefix\nCC= \$\(CROSS_COMPILE\)$target{cc}/; s/^AR=\s*/AR= \$\(CROSS_COMPILE\)/; s/^NM=\s*/NM= \$\(CROSS_COMPILE\)/; s/^RANLIB=\s*/RANLIB= \$\(CROSS_COMPILE\)/; - s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$cc/ if $cc eq "gcc"; + s/^MAKEDEPPROG=.*$/MAKEDEPPROG= \$\(CROSS_COMPILE\)$target{cc}/ if $target{cc} eq "gcc"; } else { - s/^CC=.*$/CC= $cc/; - s/^AR=\s*ar/AR= $ar/; - s/^RANLIB=.*/RANLIB= $ranlib/; - s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $cc/ if $ecc eq "gcc" || $ecc eq "clang"; + s/^CC=.*$/CC= $target{cc}/; + s/^AR=\s*ar/AR= $target{ar}/; + s/^RANLIB=.*/RANLIB= $target{ranlib}/; + s/^MAKEDEPPROG=.*$/MAKEDEPPROG= $target{cc}/ if $ecc eq "gcc" || $ecc eq "clang"; } s/^CFLAG=.*$/CFLAG= $cflags/; s/^DEPFLAG=.*$/DEPFLAG=$depflags/; s/^PEX_LIBS=.*$/PEX_LIBS= $prelflags/; s/^EX_LIBS=.*$/EX_LIBS= $lflags/; s/^EXE_EXT=.*$/EXE_EXT= $exe_ext/; - s/^CPUID_OBJ=.*$/CPUID_OBJ= $cpuid_obj/; - s/^BN_ASM=.*$/BN_ASM= $bn_obj/; - s/^EC_ASM=.*$/EC_ASM= $ec_obj/; - s/^DES_ENC=.*$/DES_ENC= $des_obj/; - s/^AES_ENC=.*$/AES_ENC= $aes_obj/; - s/^BF_ENC=.*$/BF_ENC= $bf_obj/; - s/^CAST_ENC=.*$/CAST_ENC= $cast_obj/; - s/^RC4_ENC=.*$/RC4_ENC= $rc4_obj/; - s/^RC5_ENC=.*$/RC5_ENC= $rc5_obj/; - s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $md5_obj/; - s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $sha1_obj/; - s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $rmd160_obj/; - s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $wp_obj/; - s/^CMLL_ENC=.*$/CMLL_ENC= $cmll_obj/; - s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $modes_obj/; - s/^CHACHA_ENC=.*$/CHACHA_ENC= $chacha_obj/; - s/^POLY1305_ASM_OBJ=.*$/POLY1305_ASM_OBJ= $poly1305_obj/; - s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $engines_obj/; - s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $perlasm_scheme/; + s/^CPUID_OBJ=.*$/CPUID_OBJ= $target{cpuid_obj}/; + s/^BN_ASM=.*$/BN_ASM= $target{bn_obj}/; + s/^EC_ASM=.*$/EC_ASM= $target{ec_obj}/; + s/^DES_ENC=.*$/DES_ENC= $target{des_obj}/; + s/^AES_ENC=.*$/AES_ENC= $target{aes_obj}/; + s/^BF_ENC=.*$/BF_ENC= $target{bf_obj}/; + s/^CAST_ENC=.*$/CAST_ENC= $target{cast_obj}/; + s/^RC4_ENC=.*$/RC4_ENC= $target{rc4_obj}/; + s/^RC5_ENC=.*$/RC5_ENC= $target{rc5_obj}/; + s/^MD5_ASM_OBJ=.*$/MD5_ASM_OBJ= $target{md5_obj}/; + s/^SHA1_ASM_OBJ=.*$/SHA1_ASM_OBJ= $target{sha1_obj}/; + s/^RMD160_ASM_OBJ=.*$/RMD160_ASM_OBJ= $target{rmd160_obj}/; + s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $target{wp_obj}/; + s/^CMLL_ENC=.*$/CMLL_ENC= $target{cmll_obj}/; + s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $target{modes_obj}/; + s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $target{engines_obj}/; + s/^CHACHA_ENC=.*$/CHACHA_ENC= $target{chacha_obj}/; + s/^POLY1305_ASM_OBJ=.*$/POLY1305_ASM_OBJ= $target{poly1305_obj}/; + s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $target{perlasm_scheme}/; s/^PROCESSOR=.*/PROCESSOR= $processor/; - s/^ARFLAGS=.*/ARFLAGS= $arflags/; - s/^PERL=.*/PERL= $perl/; + s/^ARFLAGS=.*/ARFLAGS= $target{arflags}/; + s/^PERL=.*/PERL= $config{perl}/; s/^LIBZLIB=.*/LIBZLIB=$withargs{"zlib-lib"}/; s/^ZLIB_INCLUDE=.*/ZLIB_INCLUDE=$withargs{"zlib-include"}/; s/^FIPSLIBDIR=.*/FIPSLIBDIR=$fipslibdir/; @@ -1264,60 +1280,59 @@ while () s/^SHARED_FIPS=.*/SHARED_FIPS=/; s/^SHLIBDIRS=.*/SHLIBDIRS= crypto ssl/; s/^BASEADDR=.*/BASEADDR=$baseaddr/; - s/^SHLIB_TARGET=.*/SHLIB_TARGET=$shared_target/; + s/^SHLIB_TARGET=.*/SHLIB_TARGET=$target{shared_target}/; s/^SHLIB_MARK=.*/SHLIB_MARK=$shared_mark/; s/^SHARED_LIBS=.*/SHARED_LIBS=\$(SHARED_CRYPTO) \$(SHARED_SSL)/ if (!$no_shared); - if ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*$/) + if ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.s([ol])\.[^\.]*$/) { my $sotmp = $1; s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp/; } - elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.dylib$/) + elsif ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.[^\.]*\.dylib$/) { s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.dylib/; } - elsif ($shared_extension ne "" && $shared_extension =~ /^\.s([ol])\.[^\.]*\.[^\.]*$/) + elsif ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.s([ol])\.[^\.]*\.[^\.]*$/) { my $sotmp = $1; s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.s$sotmp.\$(SHLIB_MAJOR) .s$sotmp/; } - elsif ($shared_extension ne "" && $shared_extension =~ /^\.[^\.]*\.[^\.]*\.dylib$/) + elsif ($target{shared_extension} ne "" && $target{shared_extension} =~ /^\.[^\.]*\.[^\.]*\.dylib$/) { s/^SHARED_LIBS_LINK_EXTS=.*/SHARED_LIBS_LINK_EXTS=.\$(SHLIB_MAJOR).dylib .dylib/; } - s/^SHARED_LDFLAGS=.*/SHARED_LDFLAGS=$shared_ldflag/; + s/^SHARED_LDFLAGS=.*/SHARED_LDFLAGS=$target{shared_ldflag}/; print OUT $_."\n"; } close(IN); close(OUT); -rename($Makefile,"$Makefile.orig") || die "unable to rename $Makefile\n" if -e $Makefile; rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n"; -print "IsMK1MF =", ($build_scheme[0] eq "mk1mf" ? "yes" : "no"), "\n"; -print "CC =$cc\n"; +print "IsMK1MF =", ($target{build_scheme}->[0] eq "mk1mf" ? "yes" : "no"), "\n"; +print "CC =$target{cc}\n"; print "CFLAG =$cflags\n"; print "EX_LIBS =$lflags\n"; -print "CPUID_OBJ =$cpuid_obj\n"; -print "BN_ASM =$bn_obj\n"; -print "EC_ASM =$ec_obj\n"; -print "DES_ENC =$des_obj\n"; -print "AES_ENC =$aes_obj\n"; -print "BF_ENC =$bf_obj\n"; -print "CAST_ENC =$cast_obj\n"; -print "RC4_ENC =$rc4_obj\n"; -print "RC5_ENC =$rc5_obj\n"; -print "MD5_OBJ_ASM =$md5_obj\n"; -print "SHA1_OBJ_ASM =$sha1_obj\n"; -print "RMD160_OBJ_ASM=$rmd160_obj\n"; -print "CMLL_ENC =$cmll_obj\n"; -print "MODES_OBJ =$modes_obj\n"; -print "ENGINES_OBJ =$engines_obj\n"; -print "CHACHA_ENC =$chacha_obj\n"; -print "POLY1305_OBJ =$poly1305_obj\n"; +print "CPUID_OBJ =$target{cpuid_obj}\n"; +print "BN_ASM =$target{bn_obj}\n"; +print "EC_ASM =$target{ec_obj}\n"; +print "DES_ENC =$target{des_obj}\n"; +print "AES_ENC =$target{aes_obj}\n"; +print "BF_ENC =$target{bf_obj}\n"; +print "CAST_ENC =$target{cast_obj}\n"; +print "RC4_ENC =$target{rc4_obj}\n"; +print "RC5_ENC =$target{rc5_obj}\n"; +print "MD5_OBJ_ASM =$target{md5_obj}\n"; +print "SHA1_OBJ_ASM =$target{sha1_obj}\n"; +print "RMD160_OBJ_ASM=$target{rmd160_obj}\n"; +print "CMLL_ENC =$target{cmll_obj}\n"; +print "MODES_OBJ =$target{modes_obj}\n"; +print "ENGINES_OBJ =$target{engines_obj}\n"; +print "CHACHA_ENC =$target{chacha_obj}\n"; +print "POLY1305_OBJ =$target{poly1305_obj}\n"; print "PROCESSOR =$processor\n"; -print "RANLIB =$ranlib\n"; -print "ARFLAGS =$arflags\n"; -print "PERL =$perl\n"; +print "RANLIB =$target{ranlib}\n"; +print "ARFLAGS =$target{arflags}\n"; +print "PERL =$config{perl}\n"; my $des_ptr=0; my $des_risc1=0; @@ -1338,7 +1353,7 @@ my $export_var_as_fn=0; my $des_int; -foreach (sort split(/\s+/,$bn_ops)) +foreach (sort split(/\s+/,$target{bn_ops})) { $des_ptr=1 if /DES_PTR/; $des_risc1=1 if /DES_RISC1/; @@ -1368,7 +1383,6 @@ foreach (sort split(/\s+/,$bn_ops)) } open(IN,'include/openssl/opensslconf.h.new') || die "unable to create include/openssl/opensslconf.h.new:$!\n"; print OUT "/* opensslconf.h */\n"; print OUT "/* WARNING: Generated automatically from opensslconf.h.in by Configure. */\n\n"; @@ -1409,19 +1423,19 @@ print OUT "#ifdef OPENSSL_ALGORITHM_DEFINES\n"; print OUT $openssl_algorithm_defines_trans; print OUT "#endif\n\n"; -print OUT "#define OPENSSL_CPUID_OBJ\n\n" if ($cpuid_obj ne "mem_clr.o"); +print OUT "#define OPENSSL_CPUID_OBJ\n\n" if ($target{cpuid_obj} ne "mem_clr.o"); while () { if (/^#define\s+OPENSSLDIR/) { - my $foo = $openssldir; + my $foo = $config{openssldir}; $foo =~ s/\\/\\\\/g; print OUT "#define OPENSSLDIR \"$foo\"\n"; } elsif (/^#define\s+ENGINESDIR/) { - my $foo = "$prefix/$libdir/engines"; + my $foo = "$config{prefix}/$libdir/engines"; $foo =~ s/\\/\\\\/g; print OUT "#define ENGINESDIR \"$foo\"\n"; } @@ -1432,7 +1446,7 @@ while () ($export_var_as_fn)?"define":"undef"; } elsif (/^#define\s+OPENSSL_UNISTD/) { - print OUT "#define OPENSSL_UNISTD $unistd\n"; + print OUT "#define OPENSSL_UNISTD $target{unistd}\n"; } elsif (/^#((define)|(undef))\s+SIXTY_FOUR_BIT_LONG/) { printf OUT "#%s SIXTY_FOUR_BIT_LONG\n",($b64l)?"define":"undef"; } @@ -1490,7 +1504,6 @@ print OUT "#ifdef __cplusplus\n"; print OUT "}\n"; print OUT "#endif\n"; close(OUT); -rename("include/openssl/opensslconf.h","include/openssl/opensslconf.h.bak") || die "unable to rename include/openssl/opensslconf.h\n" if -e "include/openssl/opensslconf.h"; rename("include/openssl/opensslconf.h.new","include/openssl/opensslconf.h") || die "unable to rename include/openssl/opensslconf.h.new\n"; @@ -1541,18 +1554,11 @@ find(sub { my %builders = ( unixmake => sub { - my $perlguess = $perl =~ m@^/@ ? $perl : '/usr/local/bin/perl'; - my $make_command = "$make PERL=\'$perlguess\'"; + my $make_command = "$make PERL=\'$config{perl}\'"; my $make_targets = ""; $make_targets .= " depend" if $depflags ne $default_depflags && $make_depend; (system $make_command.$make_targets) == 0 or die "make $make_targets failed" if $make_targets ne ""; - &dofile("tools/c_rehash",$perlguess, - '^#!/' => '#!%s', - '^my \$dir;$' => 'my $dir = "' . $openssldir . '";', - '^my \$prefix;$' => 'my $prefix = "' . $prefix . '";'); - &dofile("apps/CA.pl",$perlguess, - '^#!/' => '#!%s'); if ($depflags ne $default_depflags && !$make_depend) { $warn_make_depend++; } @@ -1571,7 +1577,7 @@ EOF close(OUT); # create the ms/version32.rc file if needed - if (! grep /^netware/, @build_scheme) { + if (! grep /^netware/, @{$target{build_scheme}}) { my ($v1, $v2, $v3, $v4); if ($version_num =~ /^0x([0-9a-f]{1})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{1})L$/i) { $v1=hex $1; @@ -1634,7 +1640,7 @@ EOF }, ); -my ($builder, @builder_opts) = @build_scheme; +my ($builder, @builder_opts) = @{$target{build_scheme}}; $builders{$builder}->(@builder_opts); print <<"EOF"; @@ -1968,23 +1974,109 @@ sub which } } -sub dofile +sub print_table_entry { - my $f; my $p; my %m; my @a; my $k; my $ff; - ($f,$p,%m)=@_; + my $target = shift; + my %target = resolve_config($target); + my $type = shift; - open(IN,"<$f.in") || open(IN,"<$f") || die "unable to open $f:$!\n"; - @a=; - close(IN); - foreach $k (keys %m) - { - grep(/$k/ && ($_=sprintf($m{$k}."\n",$p)),@a); + # Don't print the templates + return if $target{template}; + + if ($type eq "TABLE") { + print <<"EOF" + +*** $target +\$cc = $target{cc} +\$cflags = $target{cflags} +\$debug_cflags = $target{debug_cflags} +\$release_cflags = $target{release_cflags} +\$unistd = $target{unistd} +\$thread_cflag = $target{thread_cflag} +\$sys_id = $target{sys_id} +\$lflags = $target{lflags} +\$debug_lflags = $target{debug_lflags} +\$release_lflags = $target{release_lflags} +\$bn_ops = $target{bn_ops} +\$cpuid_obj = $target{cpuid_obj} +\$bn_obj = $target{bn_obj} +\$ec_obj = $target{ec_obj} +\$des_obj = $target{des_obj} +\$aes_obj = $target{aes_obj} +\$bf_obj = $target{bf_obj} +\$md5_obj = $target{md5_obj} +\$sha1_obj = $target{sha1_obj} +\$cast_obj = $target{cast_obj} +\$rc4_obj = $target{rc4_obj} +\$rmd160_obj = $target{rmd160_obj} +\$rc5_obj = $target{rc5_obj} +\$wp_obj = $target{wp_obj} +\$cmll_obj = $target{cmll_obj} +\$modes_obj = $target{modes_obj} +\$engines_obj = $target{engines_obj} +\$chacha_obj = $target{chacha_obj} +\$poly1305_obj = $target{poly1305_obj} +\$perlasm_scheme = $target{perlasm_scheme} +\$dso_scheme = $target{dso_scheme} +\$shared_target= $target{shared_target} +\$shared_cflag = $target{shared_cflag} +\$shared_ldflag = $target{shared_ldflag} +\$shared_extension = $target{shared_extension} +\$ranlib = $target{ranlib} +\$arflags = $target{arflags} +\$multilib = $target{multilib} +EOF + } elsif ($type eq "HASH") { + my @sequence = ( + "cc", + "cflags", + "debug_cflags", + "release_cflags", + "unistd", + "thread_cflag", + "sys_id", + "lflags", + "debug_lflags", + "release_lflags", + "bn_ops", + "cpuid_obj", + "bn_obj", + "ec_obj", + "des_obj", + "aes_obj", + "bf_obj", + "md5_obj", + "sha1_obj", + "cast_obj", + "rc4_obj", + "rmd160_obj", + "rc5_obj", + "wp_obj", + "cmll_obj", + "modes_obj", + "engines_obj", + "chacha_obj", + "poly1305_obj", + "perlasm_scheme", + "dso_scheme", + "shared_target", + "shared_cflag", + "shared_ldflag", + "shared_extension", + "ranlib", + "arflags", + "multilib", + ); + my $largest = + length((sort { length($a) <=> length($b) } @sequence)[-1]); + print " '$target' => {\n"; + foreach (@sequence) { + if ($target{$_}) { + print " '",$_,"'"," " x ($largest - length($_))," => '",$target{$_},"',\n"; } - open(OUT,">$f.new") || die "unable to open $f.new:$!\n"; - print OUT @a; - close(OUT); - rename($f,"$f.bak") || die "unable to rename $f\n" if -e $f; - rename("$f.new",$f) || die "unable to rename $f.new\n"; + } + print " },\n"; + } } sub quotify { diff --git a/apps/CA.pl.in b/apps/CA.pl.in index 23e116a5f5..b54df5efa9 100644 --- a/apps/CA.pl.in +++ b/apps/CA.pl.in @@ -1,4 +1,4 @@ -#!/usr/bin/perl +#!{- $config{perl} -} # # Wrapper around the ca to make it easier to use # Edit CA.pl.in not CA.pl! diff --git a/apps/Makefile.in b/apps/Makefile.in index c7153eeb98..c765bd4460 100644 --- a/apps/Makefile.in +++ b/apps/Makefile.in @@ -137,4 +137,9 @@ progs.h: progs.pl Makefile $(PERL) progs.pl $(COMMANDS) >progs.h $(RM) openssl.o +CA.pl: CA.pl.in + $(PERL) -I$(TOP) -Mconfigdata $(TOP)/util/dofile.pl < CA.pl.in > CA.pl.new + mv CA.pl.new CA.pl + + # DO NOT DELETE THIS LINE -- make depend depends on it. diff --git a/tools/Makefile.in b/tools/Makefile.in index d6c224a022..b52b45f7d3 100644 --- a/tools/Makefile.in +++ b/tools/Makefile.in @@ -15,7 +15,9 @@ GENERAL=Makefile APPS= c_rehash MISC_APPS= c_hash c_info c_issuer c_name -all: +all: apps + +apps: $(APPS) install: @[ -n "$(INSTALLTOP)" ] # should be set by top Makefile... @@ -56,4 +58,8 @@ clean: errors: +c_rehash: c_rehash.in + $(PERL) -I$(TOP) -Mconfigdata $(TOP)/util/dofile.pl < c_rehash.in > c_rehash.new + mv c_rehash.new c_rehash + # DO NOT DELETE THIS LINE -- make depend depends on it. diff --git a/tools/c_rehash.in b/tools/c_rehash.in index 834de780ca..912618c230 100644 --- a/tools/c_rehash.in +++ b/tools/c_rehash.in @@ -1,10 +1,10 @@ -#!/usr/local/bin/perl +#!{- $config{perl} -} # Perl c_rehash script, scan all files in a directory # and add symbolic links to their hash values. -my $dir; -my $prefix; +my $dir = {- quotify1($config{openssldir}) -}; +my $prefix = {- quotify1($config{prefix}) -}; my $errorcount = 0; my $openssl = $ENV{OPENSSL} || "openssl"; diff --git a/util/dofile.pl b/util/dofile.pl new file mode 100644 index 0000000000..4bf90babbf --- /dev/null +++ b/util/dofile.pl @@ -0,0 +1,99 @@ +#! /usr/bin/perl +# +# Reads one or more template files and runs it through Text::Template +# +# It is assumed that this scripts is called with -Mconfigdata, a module +# that holds configuration data in %config + +use strict; +use warnings; +use Text::Template; + +# We actually expect to get the following hash tables from configdata: +# +# %config +# %target +# %withargs +# +# We just do a minimal test to see that we got what we expected. +# $config{target} must exist as an absolute minimum. +die "You must run this script with -Mconfigdata\n" if !exists($config{target}); + +# Helper functions for the templates ################################# + +# It might be practical to quotify some strings and have them protected +# from possible harm. These functions primarly quote things that might +# be interpreted wrongly by a perl eval. + +# quotify1 STRING +# This adds quotes (") around the given string, and escapes any $, @, \, +# " and ' by prepending a \ to them. +sub quotify1 { + my $s = shift @_; + $s =~ s/([\$\@\\"'])/\\$1/g; + '"'.$s.'"'; +} + +# quotify_l LIST +# For each defined element in LIST (i.e. elements that aren't undef), have +# it quotified with 'quotofy1' +sub quotify_l { + map { + if (!defined($_)) { + (); + } else { + quotify1($_); + } + } @_; +} + +# Error reporter ##################################################### + +# The error reporter uses %lines to figure out exactly which file the +# error happened and at what line. Not that the line number may be +# the start of a perl snippet rather than the exact line where it +# happened. Nothing we can do about that here. + +my %lines = (); +sub broken { + my %args = @_; + my $filename = ""; + my $deducelines = 0; + foreach (sort keys %lines) { + $filename = $lines{$_}; + last if ($_ > $args{lineno}); + $deducelines += $_; + } + print STDERR $args{error}," in $filename, fragment starting at line ",$args{lineno}-$deducelines; + undef; +} + +# Template reading ################################################### + +# Read in all the templates into $text, while keeping track of each +# file and its size in lines, to try to help report errors with the +# correct file name and line number. + +my $prev_linecount = 0; +my $text = + @ARGV + ? join("", map { my $x = my $y = Text::Template::_load_text($_); + my $linecount = $x =~ tr/\n//; + $prev_linecount = ($linecount += $prev_linecount); + $lines{$linecount} = $_; + $x } @ARGV) + : join("", ); + +# Engage! ############################################################ + +# Load the full template (combination of files) into Text::Template +# and fill it up with our data. Output goes directly to STDOUT + +my $template = Text::Template->new(TYPE => 'STRING', SOURCE => $text ); +$template->fill_in(OUTPUT => \*STDOUT, + HASH => { config => \%config, + target => \%target, + quotify1 => \"ify1, + quotify_l => \"ify_l }, + DELIMITERS => [ "{-", "-}" ], + BROKEN => \&broken);