Padlock engine: make it independent of inline assembler.

This commit is contained in:
Andy Polyakov 2011-09-06 20:45:36 +00:00
parent 0486cce653
commit ed28aef8b4
9 changed files with 1173 additions and 815 deletions

View file

@ -123,24 +123,24 @@ my $tlib="-lnsl -lsocket";
my $bits1="THIRTY_TWO_BIT ";
my $bits2="SIXTY_FOUR_BIT ";
my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o:des-586.o crypt586.o:aes-586.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o";
my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o:des-586.o crypt586.o:aes-586.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o:e_padlock-x86.o";
my $x86_elf_asm="$x86_asm:elf";
my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o modexp512-x86_64.o::aes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o";
my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o:void";
my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o:des_enc-sparc.o fcrypt_b.o:aes_core.o aes_cbc.o aes-sparcv9.o:::sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o:::::::ghash-sparcv9.o:void";
my $sparcv8_asm=":sparcv8.o:des_enc-sparc.o fcrypt_b.o::::::::::::void";
my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o:::::sha1-alpha.o:::::::ghash-alpha.o:void";
my $mips32_asm=":bn-mips.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o:::::::";
my $mips64_asm=":bn-mips.o mips-mont.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o:::::::";
my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o::aes_ctr.o aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o";
my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o:void";
my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o:32";
my $parisc20_asm="pariscid.o:pa-risc2W.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o:64";
my $ppc32_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o:::::::";
my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o:::::::";
my $no_asm="::::::::::::::void";
my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o modexp512-x86_64.o::aes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o:e_padlock-x86_64.o";
my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o::void";
my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o:des_enc-sparc.o fcrypt_b.o:aes_core.o aes_cbc.o aes-sparcv9.o:::sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o:::::::ghash-sparcv9.o::void";
my $sparcv8_asm=":sparcv8.o:des_enc-sparc.o fcrypt_b.o:::::::::::::void";
my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o:::::sha1-alpha.o:::::::ghash-alpha.o::void";
my $mips32_asm=":bn-mips.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o::::::::";
my $mips64_asm=":bn-mips.o mips-mont.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o::::::::";
my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o::aes_ctr.o aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:";
my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o::void";
my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::32";
my $parisc20_asm="pariscid.o:pa-risc2W.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::64";
my $ppc32_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o::::::::";
my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o::aes_core.o aes_cbc.o aes-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o::::::::";
my $no_asm=":::::::::::::::void";
# As for $BSDthreads. Idea is to maintain "collective" set of flags,
# which would cover all BSD flavors. -pthread applies to them all,
@ -151,7 +151,7 @@ my $no_asm="::::::::::::::void";
# seems to be sufficient?
my $BSDthreads="-pthread -D_THREAD_SAFE -D_REENTRANT";
#config-string $cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $modes_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib
#config-string $cc : $cflags : $unistd : $thread_cflag : $sys_id : $lflags : $bn_ops : $cpuid_obj : $bn_obj : $des_obj : $aes_obj : $bf_obj : $md5_obj : $sha1_obj : $cast_obj : $rc4_obj : $rmd160_obj : $rc5_obj : $wp_obj : $cmll_obj : $modes_obj : $engines_obj : $dso_scheme : $shared_target : $shared_cflag : $shared_ldflag : $shared_extension : $ranlib : $arflags : $multilib
my %table=(
# File 'TABLE' (created by 'make TABLE') contains the data from this list,
@ -188,7 +188,7 @@ my %table=(
"debug-linux-ppro","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -mcpu=pentiumpro -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn",
"debug-linux-elf","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-lefence -ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"debug-linux-elf-noefence","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DBN_CTX_DEBUG -DCRYPTO_MDEBUG -DL_ENDIAN -DTERMIO -g -march=i486 -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:${x86_elf_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes_x86core.o aes_cbc.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::ghash-x86.o:elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"debug-linux-ia32-aes", "gcc:-DAES_EXPERIMENTAL -DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG ${x86_gcc_des} ${x86_gcc_opts}:x86cpuid.o:bn-586.o co-586.o x86-mont.o:des-586.o crypt586.o:aes_x86core.o aes_cbc.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o::ghash-x86.o:e_padlock-x86.o:elf:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"debug-linux-generic32","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"debug-linux-generic64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL BF_PTR:${no_asm}:dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"debug-linux-x86_64","gcc:-DBN_DEBUG -DREF_CHECK -DCONF_DEBUG -DCRYPTO_MDEBUG -m64 -DL_ENDIAN -DTERMIO -g -Wall::-D_REENTRANT::-ldl:SIXTY_FOUR_BIT_LONG RC4_CHUNK DES_INT DES_UNROLL:${x86_64_asm}:elf:dlfcn:linux-shared:-fPIC:-m64:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::64",
@ -294,8 +294,8 @@ my %table=(
"hpux-parisc-cc-o4","cc:-Ae +O4 +ESlit -z -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux-parisc-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${no_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux-parisc1_1-gcc","gcc:-O3 -DB_ENDIAN -DBN_DIV2W::-D_REENTRANT::-Wl,+s -ldld:BN_LLONG DES_PTR DES_UNROLL DES_RISC1:${parisc11_asm}:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1::pa-risc2.o:::::::::::::void:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o:::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
"hpux-parisc2-gcc","gcc:-march=2.0 -O3 -DB_ENDIAN -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT RC4_CHAR RC4_CHUNK DES_PTR DES_UNROLL DES_RISC1::pa-risc2.o::::::::::::::void:dl:hpux-shared:-fPIC:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux64-parisc2-gcc","gcc:-O3 -DB_ENDIAN -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2W.o::::::::::::::void:dlfcn:hpux-shared:-fpic:-shared:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
# More attempts at unified 10.X and 11.X targets for HP C compiler.
#
@ -303,7 +303,7 @@ my %table=(
# Kevin Steves <ks@hp.se>
"hpux-parisc-cc","cc:+O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DBN_DIV2W -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${no_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux-parisc1_1-cc","cc:+DA1.1 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY::-D_REENTRANT::-Wl,+s -ldld:MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc11_asm}:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa1.1",
"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2.o:::::::::::::void:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux-parisc2-cc","cc:+DA2.0 +DS2.0 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-Wl,+s -ldld:SIXTY_FOUR_BIT MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT::pa-risc2.o::::::::::::::void:dl:hpux-shared:+Z:-b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)",
"hpux64-parisc2-cc","cc:+DD64 +O3 +Optrs_strongly_typed -Ae +ESlit -DB_ENDIAN -DMD32_XARRAY -D_REENTRANT::::-ldl:SIXTY_FOUR_BIT_LONG MD2_CHAR RC4_INDEX RC4_CHAR DES_UNROLL DES_RISC1 DES_INT:${parisc20_asm}:dlfcn:hpux-shared:+Z:+DD64 -b:.sl.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/pa20_64",
# HP/UX IA-64 targets
@ -512,9 +512,9 @@ my %table=(
# Visual C targets
#
# Win64 targets, WIN64I denotes IA-64 and WIN64A - AMD64
"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o:ias:win32",
"VC-WIN64I","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o ia64-mont.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
"VC-WIN64A","cl:-W3 -Gs0 -Gy -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o:ias:win32",
"debug-VC-WIN64I","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64I::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:ia64cpuid.o:ia64.o::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o:::::::ghash-ia64.o::ias:win32",
"debug-VC-WIN64A","cl:-W3 -Gs0 -Gy -Zi -nologo -DOPENSSL_SYSNAME_WIN32 -DWIN32_LEAN_AND_MEAN -DL_ENDIAN -DUNICODE -D_UNICODE -D_CRT_SECURE_NO_DEPRECATE:::WIN64A::SIXTY_FOUR_BIT RC4_CHUNK_LL DES_INT EXPORT_VAR_AS_FN:".eval{my $asm=$x86_64_asm;$asm=~s/x86_64-gcc\.o/bn_asm.o/;$asm}.":auto:win32",
# x86 Win32 target defaults to ANSI API, if you want UNICODE, complement
# 'perl Configure VC-WIN32' with '-DUNICODE -D_UNICODE'
@ -637,6 +637,7 @@ my $idx_rc5_obj = $idx++;
my $idx_wp_obj = $idx++;
my $idx_cmll_obj = $idx++;
my $idx_modes_obj = $idx++;
my $idx_engines_obj = $idx++;
my $idx_perlasm_scheme = $idx++;
my $idx_dso_scheme = $idx++;
my $idx_shared_target = $idx++;
@ -1212,6 +1213,7 @@ my $rc5_obj = $fields[$idx_rc5_obj];
my $wp_obj = $fields[$idx_wp_obj];
my $cmll_obj = $fields[$idx_cmll_obj];
my $modes_obj = $fields[$idx_modes_obj];
my $engines_obj = $fields[$idx_engines_obj];
my $perlasm_scheme = $fields[$idx_perlasm_scheme];
my $dso_scheme = $fields[$idx_dso_scheme];
my $shared_target = $fields[$idx_shared_target];
@ -1372,7 +1374,7 @@ if ($no_asm)
{
$cpuid_obj=$bn_obj=
$des_obj=$aes_obj=$bf_obj=$cast_obj=$rc4_obj=$rc5_obj=$cmll_obj=
$modes_obj=$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj="";
$modes_obj=$sha1_obj=$md5_obj=$rmd160_obj=$wp_obj=$engines_obj="";
$cflags=~s/\-D[BL]_ENDIAN// if ($fips);
$thread_cflags=~s/\-D[BL]_ENDIAN// if ($fips);
}
@ -1701,6 +1703,7 @@ while (<IN>)
s/^WP_ASM_OBJ=.*$/WP_ASM_OBJ= $wp_obj/;
s/^CMLL_ENC=.*$/CMLL_ENC= $cmll_obj/;
s/^MODES_ASM_OBJ.=*$/MODES_ASM_OBJ= $modes_obj/;
s/^ENGINES_ASM_OBJ.=*$/ENGINES_ASM_OBJ= $engines_obj/;
s/^PERLASM_SCHEME=.*$/PERLASM_SCHEME= $perlasm_scheme/;
s/^PROCESSOR=.*/PROCESSOR= $processor/;
s/^ARFLAGS=.*/ARFLAGS= $arflags/;
@ -1773,6 +1776,7 @@ print "SHA1_OBJ_ASM =$sha1_obj\n";
print "RMD160_OBJ_ASM=$rmd160_obj\n";
print "CMLL_ENC =$cmll_obj\n";
print "MODES_OBJ =$modes_obj\n";
print "ENGINES_OBJ =$engines_obj\n";
print "PROCESSOR =$processor\n";
print "RANLIB =$ranlib\n";
print "ARFLAGS =$arflags\n";
@ -2192,7 +2196,8 @@ sub print_table_entry
(my $cc,my $cflags,my $unistd,my $thread_cflag,my $sys_id,my $lflags,
my $bn_ops,my $cpuid_obj,my $bn_obj,my $des_obj,my $aes_obj, my $bf_obj,
my $md5_obj,my $sha1_obj,my $cast_obj,my $rc4_obj,my $rmd160_obj,
my $rc5_obj,my $wp_obj,my $cmll_obj,my $modes_obj,my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
my $rc5_obj,my $wp_obj,my $cmll_obj,my $modes_obj, my $engines_obj,
my $perlasm_scheme,my $dso_scheme,my $shared_target,my $shared_cflag,
my $shared_ldflag,my $shared_extension,my $ranlib,my $arflags,my $multilib)=
split(/\s*:\s*/,$table{$target} . ":" x 30 , -1);
@ -2220,6 +2225,7 @@ sub print_table_entry
\$wp_obj = $wp_obj
\$cmll_obj = $cmll_obj
\$modes_obj = $modes_obj
\$engines_obj = $engines_obj
\$perlasm_scheme = $perlasm_scheme
\$dso_scheme = $dso_scheme
\$shared_target= $shared_target

View file

@ -100,6 +100,7 @@ RMD160_ASM_OBJ=
WP_ASM_OBJ=
CMLL_ENC=
MODES_ASM_OBJ=
ENGINES_ASM_OBJ=
PERLASM_SCHEME=
# KRB5 stuff
@ -232,6 +233,7 @@ BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \
RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \
WP_ASM_OBJ='$(WP_ASM_OBJ)' \
MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \
ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \
PERLASM_SCHEME='$(PERLASM_SCHEME)' \
FIPSLIBDIR='${FIPSLIBDIR}' \
FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
@ -375,7 +377,7 @@ build_crypto:
build_ssl:
@dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines:
@dir=engines; target=all; $(BUILD_ONE_CMD)
@dir=engines; target=all; AS='$(CC) -c'; export AS; $(BUILD_ONE_CMD)
build_apps:
@dir=apps; target=all; $(BUILD_ONE_CMD)
build_tests:

183
TABLE

File diff suppressed because it is too large Load diff

View file

@ -186,4 +186,11 @@ ___
sub ::dataseg
{ push(@out,"$segment\tENDS\n_DATA\tSEGMENT\n"); $segment="_DATA"; }
sub ::safeseh
{ my $nm=shift;
push(@out,"IF \@Version GE 710\n");
push(@out,".SAFESEH ".&::LABEL($nm,$nmdecor.$nm)."\n");
push(@out,"ENDIF\n");
}
1;

View file

@ -167,4 +167,11 @@ sub ::dataseg
else { push(@out,"section\t.data align=4\n"); }
}
sub ::safeseh
{ my $nm=shift;
push(@out,"%if __NASM_VERSION_ID__ >= 0x02030000\n");
push(@out,"safeseh ".&::LABEL($nm,$nmdecor.$nm)."\n");
push(@out,"%endif\n");
}
1;

View file

@ -16,10 +16,13 @@ RECURSIVE_MAKE= [ -z "$(ENGDIRS)" ] || for i in $(ENGDIRS) ; do \
$(MAKE) -e TOP=../.. DIR=$$i $$target ) || exit 1; \
done;
ENGINES_ASM_OBJ=
PEX_LIBS=
EX_LIBS=
CFLAGS= $(INCLUDES) $(CFLAG)
ASFLAGS= $(INCLUDES) $(ASFLAG)
GENERAL=Makefile engines.com install.com engine_vector.mar
TEST=
@ -49,7 +52,8 @@ LIBOBJ= e_4758cca.o \
e_sureware.o \
e_ubsec.o \
e_padlock.o \
e_capi.o
e_capi.o \
$(ENGINES_ASM_OBJ)
SRC= $(LIBSRC)
@ -77,7 +81,7 @@ lib: $(LIBOBJ)
set -e; \
for l in $(LIBNAMES); do \
$(MAKE) -f ../Makefile.shared -e \
LIBNAME=$$l LIBEXTRAS=e_$$l.o \
LIBNAME=$$l LIBEXTRAS="e_$$l*.o" \
LIBDEPS='-L.. -lcrypto $(EX_LIBS)' \
link_o.$(SHLIB_TARGET); \
done; \
@ -87,6 +91,11 @@ lib: $(LIBOBJ)
fi; \
touch lib
e_padlock-x86.s: asm/e_padlock-x86.pl
$(PERL) asm/e_padlock-x86.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@
e_padlock-x86_64.s: asm/e_padlock-x86_64.pl
$(PERL) asm/e_padlock-x86_64.pl $(PERLASM_SCHEME) > $@
subdirs:
echo $(EDIRS)
@target=all; $(RECURSIVE_MAKE)

View file

@ -0,0 +1,424 @@
#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# September 2011
#
# Assembler helpers for Padlock engine. Compared to original engine
# version relying on inline assembler and compiled with gcc 3.4.6 it
# was measured to provide ~100% improvement on misaligned data in ECB
# mode and ~75% in CBC mode. For aligned data improvement can be
# observed for short inputs only, e.g. 45% for 64-byte messages in
# ECB mode, 20% in CBC. Difference in performance for aligned vs.
# misaligned data depends on misalignment and is either ~1.8x or
# ~2.9x. These are approximately same factors as for hardware support,
# so there is little reason to rely on the latter. It might actually
# hurt performance in mixture of aligned and misaligned buffers,
# because a) if you choose to flip 'align' flag on per-buffer basis,
# then you'd have to reload key context; b) if you choose to set
# 'align' flag permanently, it limits performance for aligned data
# to ~1/2. All results were collected on 1.5GHz C7.
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC,"${dir}","${dir}../../crypto/perlasm");
require "x86asm.pl";
&asm_init($ARGV[0],$0);
$PADLOCK_CHUNK=512; # Must be a power of 2 larger than 16
$ctx="edx";
$out="edi";
$inp="esi";
$len="ecx";
$chunk="ebx";
&function_begin_B("padlock_capability");
&push ("ebx");
&pushf ();
&pop ("eax");
&mov ("ecx","eax");
&xor ("eax",1<<21);
&push ("eax");
&popf ();
&pushf ();
&pop ("eax");
&xor ("ecx","eax");
&xor ("eax","eax");
&bt ("ecx",21);
&jnc (&label("noluck"));
&cpuid ();
&xor ("eax","eax");
&cmp ("ebx","0x".unpack("H*",'tneC'));
&jne (&label("noluck"));
&cmp ("edx","0x".unpack("H*",'Hrua'));
&jne (&label("noluck"));
&cmp ("ecx","0x".unpack("H*",'slua'));
&jne (&label("noluck"));
&mov ("eax",0xC0000000);
&cpuid ();
&mov ("edx","eax");
&xor ("eax","eax");
&cmp ("edx",0xC0000001);
&jb (&label("noluck"));
&mov ("eax",1);
&cpuid ();
&or ("eax",0x0f);
&xor ("ebx","ebx");
&and ("eax",0x0fff);
&cmp ("eax",0x06ff); # check for Nano
&sete ("bl");
&mov ("eax",0xC0000001);
&push ("ebx");
&cpuid ();
&pop ("ebx");
&mov ("eax","edx");
&shl ("ebx",4); # bit#4 denotes Nano
&and ("eax",0xffffffef);
&or ("eax","ebx")
&set_label("noluck");
&pop ("ebx");
&ret ();
&function_end_B("padlock_capability")
&function_begin_B("padlock_key_bswap");
&mov ("edx",&wparam(0));
&mov ("ecx",&DWP(240,"edx"));
&set_label("bswap_loop");
&mov ("eax",&DWP(0,"edx"));
&bswap ("eax");
&mov (&DWP(0,"edx"),"eax");
&lea ("edx",&DWP(4,"edx"));
&sub ("ecx",1);
&jnz (&label("bswap_loop"));
&ret ();
&function_end_B("padlock_key_bswap");
# This is heuristic key context tracing. At first one
# believes that one should use atomic swap instructions,
# but it's not actually necessary. Point is that if
# padlock_saved_context was changed by another thread
# after we've read it and before we compare it with ctx,
# our key *shall* be reloaded upon thread context switch
# and we are therefore set in either case...
&static_label("padlock_saved_context");
&function_begin_B("padlock_verify_context");
&mov ($ctx,&wparam(0));
&lea ("eax",&DWP("padlock_saved_context-".&label("verify_pic_point")));
&pushf ();
&call ("_padlock_verify_ctx");
&set_label("verify_pic_point");
&lea ("esp",&DWP(4,"esp"));
&ret ();
&function_end_B("padlock_verify_context");
&function_begin_B("_padlock_verify_ctx");
&add ("eax",&DWP(0,"esp")); # &padlock_saved_context
&bt (&DWP(4,"esp"),30); # eflags
&jnc (&label("verified"));
&cmp ($ctx,&DWP(0,"eax"));
&je (&label("verified"));
&pushf ();
&popf ();
&set_label("verified");
&mov (&DWP(0,"eax"),$ctx);
&ret ();
&function_end_B("_padlock_verify_ctx");
&function_begin_B("padlock_reload_key");
&pushf ();
&popf ();
&ret ();
&function_end_B("padlock_reload_key");
&function_begin_B("padlock_aes_block");
&push ("edi");
&push ("esi");
&push ("ebx");
&mov ($out,&wparam(0)); # must be 16-byte aligned
&mov ($inp,&wparam(1)); # must be 16-byte aligned
&mov ($ctx,&wparam(2));
&mov ($len,1);
&lea ("ebx",&DWP(32,$ctx)); # key
&lea ($ctx,&DWP(16,$ctx)); # control word
&data_byte(0xf3,0x0f,0xa7,0xc8); # rep xcryptecb
&pop ("ebx");
&pop ("esi");
&pop ("edi");
&ret ();
&function_end_B("padlock_aes_block");
sub generate_mode {
my ($mode,$opcode) = @_;
# int padlock_$mode_encrypt(void *out, const void *inp,
# struct padlock_cipher_data *ctx, size_t len);
&function_begin("padlock_${mode}_encrypt");
&mov ($out,&wparam(0));
&mov ($inp,&wparam(1));
&mov ($ctx,&wparam(2));
&mov ($len,&wparam(3));
&test ($ctx,15);
&jnz (&label("${mode}_abort"));
&test ($len,15);
&jnz (&label("${mode}_abort"));
&lea ("eax",&DWP("padlock_saved_context-".&label("${mode}_pic_point")));
&pushf ();
&cld ();
&call ("_padlock_verify_ctx");
&set_label("${mode}_pic_point");
&lea ($ctx,&DWP(16,$ctx)); # control word
&xor ("eax","eax");
if ($mode eq "ctr16") {
&movdqa ("xmm0",&QWP(-16,$ctx));# load iv
} else {
&xor ("ebx","ebx");
&test (&DWP(0,$ctx),1<<5); # align bit in control word
&jnz (&label("${mode}_aligned"));
&test ($out,0x0f);
&setz ("al"); # !out_misaligned
&test ($inp,0x0f);
&setz ("bl"); # !inp_misaligned
&test ("eax","ebx");
&jnz (&label("${mode}_aligned"));
&neg ("eax");
}
&mov ($chunk,$PADLOCK_CHUNK);
&not ("eax"); # out_misaligned?-1:0
&lea ("ebp",&DWP(-24,"esp"));
&cmp ($len,$chunk);
&cmovc ($chunk,$len); # chunk=len>PADLOCK_CHUNK?PADLOCK_CHUNK:len
&and ("eax",$chunk); # out_misaligned?chunk:0
&mov ($chunk,$len);
&neg ("eax");
&and ($chunk,$PADLOCK_CHUNK-1); # chunk=len%PADLOCK_CHUNK
&lea ("esp",&DWP(0,"eax","ebp")); # alloca
&and ("esp",-16);
&jmp (&label("${mode}_loop"));
&set_label("${mode}_loop",16);
&mov (&DWP(0,"ebp"),$out); # save parameters
&mov (&DWP(4,"ebp"),$inp);
&mov (&DWP(8,"ebp"),$len);
&mov ($len,$chunk);
&mov (&DWP(12,"ebp"),$chunk); # chunk
if ($mode eq "ctr16") {
&pextrw ("ecx","xmm0",7); # borrow $len
&mov ($inp,1);
&xor ($out,$out);
&xchg ("ch","cl");
&set_label("${mode}_prepare");
&movdqa (&QWP(0,"esp",$out),"xmm0");
&lea ("eax",&DWP(0,"ecx",$inp));
&xchg ("ah","al");
&lea ($out,&DWP(16,$out));
&pinsrw ("xmm0","eax",7);
&lea ($inp,&DWP(1,$inp));
&cmp ($out,$chunk);
&jb (&label("${mode}_prepare"));
&lea ($inp,&DWP(0,"esp"));
&lea ($out,&DWP(0,"esp"));
&mov ($len,$chunk);
} else {
&test ($out,0x0f); # out_misaligned
&cmovnz ($out,"esp");
&test ($inp,0x0f); # inp_misaligned
&jz (&label("${mode}_inp_aligned"));
&shr ($len,2);
&data_byte(0xf3,0xa5); # rep movsl
&sub ($out,$chunk);
&mov ($len,$chunk);
&mov ($inp,$out);
&set_label("${mode}_inp_aligned");
}
&lea ("eax",&DWP(-16,$ctx)); # ivp
&lea ("ebx",&DWP(16,$ctx)); # key
&shr ($len,4); # len/=AES_BLOCK_SIZE
&data_byte(0xf3,0x0f,0xa7,$opcode); # rep xcrypt*
if ($mode !~ /ecb|ctr/) {
&movdqa ("xmm0",&QWP(0,"eax"));
&movdqa (&DWP(-16,$ctx),"xmm0"); # copy [or refresh] iv
}
&mov ($out,&DWP(0,"ebp")); # restore parameters
&mov ($chunk,&DWP(12,"ebp"));
if ($mode eq "ctr16") {
&mov ($inp,&DWP(4,"ebp"));
&xor ($len,$len);
&set_label("${mode}_xor");
&movdqu ("xmm1",&QWP(0,$inp,$len));
&lea ($len,&DWP(16,$len));
&pxor ("xmm1",&QWP(-16,"esp",$len));
&movdqu (&QWP(-16,$out,$len),"xmm1");
&cmp ($len,$chunk);
&jb (&label("${mode}_xor"));
} else {
&test ($out,0x0f);
&jz (&label("${mode}_out_aligned"));
&mov ($len,$chunk);
&shr ($len,2);
&lea ($inp,&DWP(0,"esp"));
&data_byte(0xf3,0xa5); # rep movsl
&sub ($out,$chunk);
&set_label("${mode}_out_aligned");
&mov ($inp,&DWP(4,"ebp"));
}
&mov ($len,&DWP(8,"ebp"));
&add ($out,$chunk);
&add ($inp,$chunk);
&sub ($len,$chunk);
&mov ($chunk,$PADLOCK_CHUNK);
&jnz (&label("${mode}_loop"));
if ($mode eq "ctr16") {
&movdqa (&QWP(-16,$ctx),"xmm0"); # write out iv
&pxor ("xmm0","xmm0");
&pxor ("xmm1","xmm1");
} else {
&test ($out,0x0f); # out_misaligned
&jz (&label("${mode}_done"));
}
&mov ($len,"ebp");
&mov ($out,"esp");
&sub ($len,"esp");
&xor ("eax","eax");
&shr ($len,2);
&data_byte(0xf3,0xab); # rep stosl
&set_label("${mode}_done");
&lea ("esp",&DWP(24,"ebp"));
if ($mode ne "ctr16") {
&jmp (&label("${mode}_exit"));
&set_label("${mode}_aligned",16);
&lea ("eax",&DWP(-16,$ctx)); # ivp
&lea ("ebx",&DWP(16,$ctx)); # key
&shr ($len,4); # len/=AES_BLOCK_SIZE
&data_byte(0xf3,0x0f,0xa7,$opcode); # rep xcrypt*
if ($mode ne "ecb") {
&movdqa ("xmm0",&QWP(0,"eax"));
&movdqa (&DWP(-16,$ctx),"xmm0"); # copy [or refresh] iv
}
&set_label("${mode}_exit"); }
&mov ("eax",1);
&lea ("esp",&DWP(4,"esp")); # popf
&set_label("${mode}_abort");
&function_end("padlock_${mode}_encrypt");
}
&generate_mode("ecb",0xc8);
&generate_mode("cbc",0xd0);
&generate_mode("cfb",0xe0);
&generate_mode("ofb",0xe8);
&generate_mode("ctr16",0xc8); # yes, it implements own ctr with ecb opcode,
# because hardware ctr was introduced later
# and even has errata on certain CPU stepping.
# own implementation *always* works...
&function_begin_B("padlock_xstore");
&push ("edi");
&mov ("edi",&wparam(0));
&mov ("edx",&wparam(1));
&data_byte(0x0f,0xa7,0xc0); # xstore
&pop ("edi");
&ret ();
&function_end_B("padlock_xstore");
&function_begin_B("_win32_segv_handler");
&mov ("eax",1); # ExceptionContinueSearch
&mov ("edx",&wparam(0)); # *ExceptionRecord
&mov ("ecx",&wparam(2)); # *ContextRecord
&cmp (&DWP(0,"edx"),0xC0000005) # ExceptionRecord->ExceptionCode == STATUS_ACCESS_VIOLATION
&jne (&label("ret"));
&add (&DWP(184,"ecx"),4); # skip over rep sha*
&mov ("eax",0); # ExceptionContinueExecution
&set_label("ret");
&ret ();
&function_end_B("_win32_segv_handler");
&safeseh("_win32_segv_handler") if ($::win32);
&function_begin_B("padlock_sha1_oneshot");
&push ("edi");
&push ("esi");
&xor ("eax","eax");
if ($::win32 or $::coff) {
&push (&::islabel("_win32_segv_handler"));
&data_byte(0x64,0xff,0x30); # push %fs:(%eax)
&data_byte(0x64,0x89,0x20); # mov %esp,%fs:(%eax)
}
&mov ("edi",&wparam(0));
&mov ("esi",&wparam(1));
&mov ("ecx",&wparam(2));
&data_byte(0xf3,0x0f,0xa6,0xc8); # rep xsha1
if ($::win32 or $::coff) {
&data_byte(0x64,0x8f,0x05,0,0,0,0); # pop %fs:0
&lea ("esp",&DWP(4,"esp"));
}
&pop ("esi");
&pop ("edi");
&ret ();
&function_end_B("padlock_sha1_oneshot");
&function_begin_B("padlock_sha1");
&push ("edi");
&push ("esi");
&mov ("eax",-1);
&mov ("edi",&wparam(0));
&mov ("esi",&wparam(1));
&mov ("ecx",&wparam(2));
&data_byte(0xf3,0x0f,0xa6,0xc8); # rep xsha1
&pop ("esi");
&pop ("edi");
&ret ();
&function_end_B("padlock_sha1");
&function_begin_B("padlock_sha256_oneshot");
&push ("edi");
&push ("esi");
&xor ("eax","eax");
if ($::win32 or $::coff) {
&push (&::islabel("_win32_segv_handler"));
&data_byte(0x64,0xff,0x30); # push %fs:(%eax)
&data_byte(0x64,0x89,0x20); # mov %esp,%fs:(%eax)
}
&mov ("edi",&wparam(0));
&mov ("esi",&wparam(1));
&mov ("ecx",&wparam(2));
&data_byte(0xf3,0x0f,0xa6,0xd0); # rep xsha256
if ($::win32 or $::coff) {
&data_byte(0x64,0x8f,0x05,0,0,0,0); # pop %fs:0
&lea ("esp",&DWP(4,"esp"));
}
&pop ("esi");
&pop ("edi");
&ret ();
&function_end_B("padlock_sha256_oneshot");
&function_begin_B("padlock_sha256");
&push ("edi");
&push ("esi");
&mov ("eax",-1);
&mov ("edi",&wparam(0));
&mov ("esi",&wparam(1));
&mov ("ecx",&wparam(2));
&data_byte(0xf3,0x0f,0xa6,0xd0); # rep xsha256
&pop ("esi");
&pop ("edi");
&ret ();
&function_end_B("padlock_sha256");
&asciz ("VIA Padlock x86 module, CRYPTOGAMS by <appro\@openssl.org>");
&align (16);
&dataseg();
# Essentially this variable belongs in thread local storage.
# Having this variable global on the other hand can only cause
# few bogus key reloads [if any at all on signle-CPU system],
# so we accept the panalty...
&set_label("padlock_saved_context",4);
&data_word(0);
&asm_finish();

View file

@ -0,0 +1,327 @@
#!/usr/bin/env perl
# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
# September 2011
#
# Assembler helpers for Padlock engine.
$flavour = shift;
$output = shift;
if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
$win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
( $xlate="${dir}../../crypto/perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
open STDOUT,"| $^X $xlate $flavour $output";
$code=".text\n";
$PADLOCK_CHUNK=512; # Must be a power of 2 larger than 16
$ctx="%rdx";
$out="%rdi";
$inp="%rsi";
$len="%rcx";
$chunk="%rbx";
($arg1,$arg2,$arg3,$arg4)=$win64?("%rcx","%rdx","%r8", "%r9") : # Win64 order
("%rdi","%rsi","%rdx","%rcx"); # Unix order
$code.=<<___;
.globl padlock_capability
.type padlock_capability,\@abi-omnipotent
.align 16
padlock_capability:
mov %rbx,%r8
xor %eax,%eax
cpuid
xor %eax,%eax
cmp \$`"0x".unpack("H*",'tneC')`,%ebx
jne .Lnoluck
cmp \$`"0x".unpack("H*",'Hrua')`,%edx
jne .Lnoluck
cmp \$`"0x".unpack("H*",'slua')`,%ecx
jne .Lnoluck
mov \$0xC0000000,%eax
cpuid
mov %eax,%edx
xor %eax,%eax
cmp \$0xC0000001,%edx
jb .Lnoluck
mov \$0xC0000001,%eax
cpuid
mov %edx,%eax
and \$0xffffffef,%eax
or \$0x10,%eax # set Nano bit#4
.Lnoluck:
mov %r8,%rbx
ret
.size padlock_capability,.-padlock_capability
.globl padlock_key_bswap
.type padlock_key_bswap,\@abi-omnipotent,0
.align 16
padlock_key_bswap:
mov 240($arg1),%edx
.Lbswap_loop:
mov ($arg1),%eax
bswap %eax
mov %eax,($arg1)
lea 4($arg1),$arg1
sub \$1,%edx
jnz .Lbswap_loop
ret
.size padlock_key_bswap,.-padlock_key_bswap
.globl padlock_verify_context
.type padlock_verify_context,\@abi-omnipotent
.align 16
padlock_verify_context:
mov $arg1,$ctx
pushf
lea .Lpadlock_saved_context(%rip),%rax
call _padlock_verify_ctx
lea 8(%rsp),%rsp
ret
.size padlock_verify_context,.-padlock_verify_context
.type _padlock_verify_ctx,\@abi-omnipotent
.align 16
_padlock_verify_ctx:
mov 8(%rsp),%r8
bt \$30,%r8
jnc .Lverified
cmp (%rax),$ctx
je .Lverified
pushf
popf
.Lverified:
mov $ctx,(%rax)
ret
.size _padlock_verify_ctx,.-_padlock_verify_ctx
.globl padlock_reload_key
.type padlock_reload_key,\@abi-omnipotent
.align 16
padlock_reload_key:
pushf
popf
ret
.size padlock_reload_key,.-padlock_reload_key
.globl padlock_aes_block
.type padlock_aes_block,\@function,3
.align 16
padlock_aes_block:
mov %rbx,%r8
mov \$1,$len
lea 32($ctx),%rbx # key
lea 16($ctx),$ctx # control word
.byte 0xf3,0x0f,0xa7,0xc8 # rep xcryptecb
mov %r8,%rbx
ret
.size padlock_aes_block,.-padlock_aes_block
.globl padlock_xstore
.type padlock_xstore,\@function,2
.align 16
padlock_xstore:
mov %esi,%edx
.byte 0x0f,0xa7,0xc0 # xstore
ret
.size padlock_xstore,.-padlock_xstore
.globl padlock_sha1_oneshot
.type padlock_sha1_oneshot,\@function,3
.align 16
padlock_sha1_oneshot:
xor %rax,%rax
mov %rdx,%rcx
.byte 0xf3,0x0f,0xa6,0xc8 # rep xsha1
ret
.size padlock_sha1_oneshot,.-padlock_sha1_oneshot
.globl padlock_sha1
.type padlock_sha1,\@function,3
.align 16
padlock_sha1:
mov \$-1,%rax
mov %rdx,%rcx
.byte 0xf3,0x0f,0xa6,0xc8 # rep xsha1
ret
.size padlock_sha1,.-padlock_sha1
.globl padlock_sha256_oneshot
.type padlock_sha256_oneshot,\@function,3
.align 16
padlock_sha256_oneshot:
xor %rax,%rax
mov %rdx,%rcx
.byte 0xf3,0x0f,0xa6,0xd0 # rep xsha256
ret
.size padlock_sha256_oneshot,.-padlock_sha256_oneshot
.globl padlock_sha256
.type padlock_sha256,\@function,3
.align 16
padlock_sha256:
mov \$-1,%rax
mov %rdx,%rcx
.byte 0xf3,0x0f,0xa6,0xd0 # rep xsha256
ret
.size padlock_sha256,.-padlock_sha256
___
sub generate_mode {
my ($mode,$opcode) = @_;
# int padlock_$mode_encrypt(void *out, const void *inp,
# struct padlock_cipher_data *ctx, size_t len);
$code.=<<___;
.globl padlock_${mode}_encrypt
.type padlock_${mode}_encrypt,\@function,4
.align 16
padlock_${mode}_encrypt:
push %rbp
push %rbx
xor %eax,%eax
test \$15,$ctx
jnz .L${mode}_abort
test \$15,$len
jnz .L${mode}_abort
lea .Lpadlock_saved_context(%rip),%rax
pushf
cld
call _padlock_verify_ctx
lea 16($ctx),$ctx # control word
xor %eax,%eax
xor %ebx,%ebx
test \$`1<<5`,($ctx) # align bit in control word
test \$0x0f,$out
setz %al # !out_misaligned
test \$0x0f,$inp
setz %bl # !inp_misaligned
test %ebx,%eax
jnz .L${mode}_aligned
neg %rax
mov \$$PADLOCK_CHUNK,$chunk
not %rax # out_misaligned?-1:0
lea (%rsp),%rbp
cmp $chunk,$len
cmovc $len,$chunk # chunk=len>PADLOCK_CHUNK?PADLOCK_CHUNK:len
and $chunk,%rax # out_misaligned?chunk:0
mov $len,$chunk
neg %rax
and \$$PADLOCK_CHUNK-1,$chunk # chunk%=PADLOCK_CHUNK
lea (%rax,%rbp),%rsp
jmp .L${mode}_loop
.align 16
.L${mode}_loop:
mov $out,%r8 # save parameters
mov $inp,%r9
mov $len,%r10
mov $chunk,$len
mov $chunk,%r11
test \$0x0f,$out # out_misaligned
cmovnz %rsp,$out
test \$0x0f,$inp # inp_misaligned
jz .L${mode}_inp_aligned
shr \$3,$len
.byte 0xf3,0x48,0xa5 # rep movsq
sub $chunk,$out
mov $chunk,$len
mov $out,$inp
.L${mode}_inp_aligned:
lea -16($ctx),%rax # ivp
lea 16($ctx),%rbx # key
shr \$4,$len
.byte 0xf3,0x0f,0xa7,$opcode # rep xcrypt*
___
$code.=<<___ if ($mode !~ /ecb|ctr/);
movdqa (%rax),%xmm0
movdqa %xmm0,-16($ctx) # copy [or refresh] iv
___
$code.=<<___;
mov %r8,$out # restore paramters
mov %r11,$chunk
test \$0x0f,$out
jz .L${mode}_out_aligned
mov $chunk,$len
shr \$3,$len
lea (%rsp),$inp
.byte 0xf3,0x48,0xa5 # rep movsq
sub $chunk,$out
.L${mode}_out_aligned:
mov %r9,$inp
mov %r10,$len
add $chunk,$out
add $chunk,$inp
sub $chunk,$len
mov \$$PADLOCK_CHUNK,$chunk
jnz .L${mode}_loop
test \$0x0f,$out
jz .L${mode}_done
mov %rbp,$len
mov %rsp,$out
sub %rsp,$len
xor %rax,%rax
shr \$3,$len
.byte 0xf3,0x48,0xab # rep stosq
.L${mode}_done:
lea (%rbp),%rsp
jmp .L${mode}_exit
.align 16
.L${mode}_aligned:
lea -16($ctx),%rax # ivp
lea 16($ctx),%rbx # key
shr \$4,$len # len/=AES_BLOCK_SIZE
.byte 0xf3,0x0f,0xa7,$opcode # rep xcrypt*
___
$code.=<<___ if ($mode !~ /ecb|ctr/);
movdqa (%rax),%xmm0
movdqa %xmm0,-16($ctx) # copy [or refresh] iv
___
$code.=<<___;
.L${mode}_exit:
mov \$1,%eax
lea 8(%rsp),%rsp
.L${mode}_abort:
pop %rbx
pop %rbp
ret
.size padlock_${mode}_encrypt,.-padlock_${mode}_encrypt
___
}
&generate_mode("ecb",0xc8);
&generate_mode("cbc",0xd0);
&generate_mode("cfb",0xe0);
&generate_mode("ofb",0xe8);
&generate_mode("ctr16",0xd8);
$code.=<<___;
.asciz "VIA Padlock x86_64 module, CRYPTOGAMS by <appro\@openssl.org>"
.align 16
.data
.align 8
.Lpadlock_saved_context:
.quad 0
___
$code =~ s/\`([^\`]*)\`/eval($1)/gem;
print $code;
close STDOUT;

File diff suppressed because it is too large Load diff