If ossl_method_store_add() gets called with a method that already exists
(i.e. the store has one with matching provider, nid and properties), that
method should not be stored. We do this check inside ossl_method_store_add()
because it has all the locking required to do so safely.
Fixes#9561
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9650)
Because this function affects the reference count on failure (the call
to impl_free() does this), it may as well handle incrementing it as
well to indicate the extra reference in the method store.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9650)
Quite a few adaptations are needed, most prominently the added code
to allow provider based MACs.
As part of this, all the old information functions are gone, except
for EVP_MAC_name(). Some of them will reappear later, for example
EVP_MAC_do_all() in some form.
MACs by EVP_PKEY was particularly difficult to deal with, as they
need to allocate and deallocate EVP_MAC_CTXs "under the hood", and
thereby implicitly fetch the corresponding EVP_MAC. This means that
EVP_MACs can't be constant in a EVP_MAC_CTX, as their reference count
may need to be incremented and decremented as part of the allocation
or deallocation of the EVP_MAC_CTX. It may be that other provider
based EVP operation types may need to be handled in a similar manner.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8877)
It was argued that names like SOMETHING_set_param_types were confusing,
and a rename has been proposed to SOMETHING_settable_params, and by
consequence, SOMETHING_get_param_types is renamed
SOMETHING_gettable_params.
This changes implements this change for the dispatched provider and
core functions.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9591)
Previously we only loaded the config file by default for libssl. Now we do
it for libcrypto too.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9492)
CAdES : rework CAdES signing API.
Make it private, as it is unused outside library bounds.
Fix varous doc-nits.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Public function OSSL_PROVIDER_available() takes a library context and
a provider name, and returns 1 if it's available for use, i.e. if it's
possible to fetch implementations from it, otherwise 0.
Internal function ossl_provider_activated() returns 1 if the given
OSSL_PROVIDER is activated, otherwise 0.
To make this possible, the activation of fallbacks got refactored out
to a separate function, which ended up simplifying the code.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9398)
This function is used to traverse all the implementations provided by
one provider, or all implementation for a specific operation across
all loaded providers, or both, and execute a given function for each
occurence.
This will be used by ossl_method_construct(), but also by information
processing functions.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9356)
This function clears the cache of provider key references, and is used
in evp_keymgmt_export_to_provider() when the internal key is dirty, as
well as by EVP_PKEY_free_it().
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9312)
This function is used to transport private key materia from whatever
is already attached to the EVP_PKEY to the new provider, using key
data export and import functionality.
If a legacy lower level key has been assigned to the EVP_PKEY, we use
its data to create a provider side key, and thereby have a bridge
between old style public key types and the EVP_PKEY on providers.
If successful, this function returns a reference to the appropriate
provider side data for the key.
This can be used by any operation that wants to use this key.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9312)
This means include deallocation information in the return from
the ossl_param_bld_to_param function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9404)
A fuller implementation of PARAMS_TEMPLATE as per #9266 but renamed.
This introduces a statis data type which can be used to constructor a
description of a parameter array. It can then be converted into a OSSL_PARAM
array and the allocated storage freed by a single call to OPENSSL_free.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9305)
3.0.0 is a habit from pre-3.0 OpenSSL, which doesn't make sense with
the new version scheme.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9376)
We provider internal versions of RAND_bytes() and RAND_priv_bytes() which
have the addition of taking an OPENSSL_CTX as a parameter.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9193)
Common pattern is that the routines to increment the reference count
are called something_up_ref, not something_upref. Adapt
ossl_provider_upref() accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9293)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9288)
Providers that link against libcrypto can just use OBJ_nid2sn() to look
up the name of an algorithm given a NID. However that doesn't work for the
FIPS provider because OBJ_nid2sn() is not available there (due to the
reliance of the code on ASN.1 types). Therefore we provider a new function
to do this mapping. For providers linking against libcrypto the new function
just wraps OBJ_nid2sn(). For the FIPS provider it has a look up for all the
NIDs known there.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9035)
Algorithms may have multiple names, as seen in the legacy names
database. We need to support that as well.
This implementations modifies ossl_namemap to support multiple names
for the same identifier.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8967)
Instead of referencing the return size from the OSSL_PARAM structure, make the
size a field within the structure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9135)
We need blank lines on each side of a section heading.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9192)
Because the operation identity wasn't integrated with the created
methods, the following code would give unexpected results:
EVP_MD *md = EVP_MD_fetch(NULL, "MD5", NULL);
EVP_CIPHER *cipher = EVP_CIPHER_fetch(NULL, "MD5", NULL);
if (md != NULL)
printf("MD5 is a digest\n");
if (cipher != NULL)
printf("MD5 is a cipher\n");
The message is that MD5 is both a digest and a cipher.
Partially fixes#9106
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9109)
Now that the legacy NID isn't used as a main index for fetched
algorithms, the legacy NID was just transported around unnecessarily.
This is removed, and the legacy NID is simply set by EVP_{API}_fetch()
after the construction process is done.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8878)
We didn't deal very well with names that didn't have pre-defined NIDs,
as the NID zero travelled through the full process and resulted in an
inaccessible method. By consequence, we need to refactor the method
construction callbacks to rely more on algorithm names.
We must, however, still store the legacy NID with the method, for the
sake of other code that depend on it (for example, CMS).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8878)
OSSL_provider_init() gets another output parameter, holding a pointer
to a provider side context. It's entirely up to the provider to
define the context and what it's being used for. This pointer is
passed back to other provider functions, typically the provider global
get_params and set_params functions, and also the diverse algorithm
context creators, and of course, the teardown function.
With this, a provider can be instantiated more than once, or be
re-loaded as the case may be, while maintaining instance state.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8848)
When we attempt to fetch a method with a given NID we will ask the
providers for it if we don't already know about it. During that process
we may be told about other methods with a different NID. We need to
make sure we don't confuse the two.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8541)
To ensure that old applications aren't left without any provider, and
at the same time not forcing any default provider on applications that
know how to deal with them, we device the concept of fallback
providers, which are automatically activated if no other provider is
already activated.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8480)
This is an interface between Core dispatch table fetching and
EVP_{method}_fetch(). All that's needed from the diverse method
fetchers are the functions to create a method structure from a
dispatch table, a function that ups the method reference counter and a
function to free the method (in case of failure).
This routine is internal to the EVP API andis therefore only made
accessible within crypto/evp, by including evp_locl.h
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8341)
Fully assume that the method constructors use reference counting.
Otherwise, we may leak memory, or loose track and do a double free.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8341)
This queries the provider for its available functionality (unless a
matching method structured is already cached, in which case that's
used instead), and creates method structure with the help of a passed
constructor. The result is cached if the provider allows it (or if
caching is forced).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8340)
This should never reduce the range covered and might increase it on some
platforms.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8415)
The NAME section format is comma separated names to the left of the
left of the dash, free form on the right. If we don't follow that
form, programs like apropos(1) and whatis(1) can't do their job
properly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8267)
- Add a bit more text about that is expected of the user or
OSSL_METHOD_STOREs.
- Clarify what a method and what a numeric identity are.
- Change all mentions of 'implementation' and 'result' to 'method'.
To clarify further: OpenSSL has used the term 'method' for structures
that mainly contains function pointers. Those are the methods that
are expected to be stored away in OSSL_METHOD_STOREs. In the end,
however, it's the caller's responsibility to define exactly what they
want to store, as long as its 'methods' are associated with a numeric
identity and properties.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8265)
Properties are a sequence of comma separated name=value pairs. A name
without a corresponding value is assumed to be a Boolean and have the
true value 'yes'. Values are either strings or numbers. Strings can be
quoted either _"_ or _'_ or unquoted (with restrictions). There are no
escape characters inside strings. Number are either decimal digits or
'0x' followed by hexidecimal digits. Numbers are represented internally
as signed sixty four bit values.
Queries on properties are a sequence comma separated conditional tests.
These take the form of name=value (equality test), name!=value (inequality
test) or name (Boolean test for truth). Queries can be parsed, compared
against a definition or merged pairwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)
The context builds on CRYPTO_EX_DATA, allowing it to be dynamically
extended with new data from the different parts of libcrypto.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
Iterators over the sparse array structures have gained an initial argument
which indicates the index into the array of the element. This can be used,
e.g., to delete or modify the associated value.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8229)
This commit adds a space and time efficient sparse array data structure.
The structure's raw API is wrapped by inline functions which provide type
safety.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8197)
