The option is a flag for Options, not a standalone setting.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8292)
(cherry picked from commit 4ac5e43da6)
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8175)
(cherry picked from commit 8e981051ce)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
(cherry picked from commit 4af5836b55)
If the old openssl versions not supporting the .include directive
load a config file with it, they will bail out with error.
This change allows using the .include = <filename> syntax which
is interpreted as variable assignment by the old openssl
config file parser.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8141)
(cherry picked from commit 9d5560331d)
Making this a no-op removes a potential infinite loop than can occur in
some situations.
Fixes#2865
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8167)
(cherry picked from commit ef45aa14c5)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Backport-of: https://github.com/openssl/openssl/pull/8092
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8134)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
(cherry picked from commit 09d62b336d)
The option -twopass to the pkcs12 app is ignored if -passin, -passout
or -password is used. We should complain if an attempt is made to use
it in combination with those options.
Fixes#8107
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8114)
(cherry picked from commit 40b64553f5)
1. In addition to overriding the default application name,
one can now also override the configuration file name
and flags passed to CONF_modules_load_file().
2. By default we still keep going when configuration file
processing fails. But, applications that want to be
strict about initialization errors can now make explicit
flag choices via non-null OPENSSL_INIT_SETTINGS that omit
the CONF_MFLAGS_IGNORE_RETURN_CODES flag (which had so far
been both undocumented and unused).
3. In OPENSSL_init_ssl() do not request OPENSSL_INIT_LOAD_CONFIG
if the options already include OPENSSL_INIT_NO_LOAD_CONFIG.
4. Don't set up atexit() handlers when called with opts equal to
OPENSSL_INIT_BASE_ONLY (this flag should only be used alone).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7969)
CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)
(cherry picked from commit 47ec2367eb)
The correct function name is SSL_CTX_enable_ct, not SSL_CTX_ct_enable.
Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7916)
(cherry picked from commit 6f8b858d05)
While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.
It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)
CLA: trivial
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7887)
(cherry picked from commit 829800b073)
There was a trailing :w at a line, which didn't make sense in context
of the sentence/styling. Removed it, because I think it's a leftover
vi command.
CLA: trivial
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7875)
(cherry picked from commit 143b631639)
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7705)
(cherry picked from commit 56bc3ea0a4)
Fix some issues in tls13_hkdf_expand() which impact the above function
for TLSv1.3. In particular test that we can use the maximum label length
in TLSv1.3.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7755)
(cherry picked from commit 0fb2815b87)
And make RSAErr call unconditional.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit e875b0cf2f)
SSL_get_signature_nid() -- local signature algorithm
SSL_get_signature_type_nid() -- local signature algorithm key type
SSL_get_peer_tmp_key() -- Peer key-exchange public key
SSL_get_tmp_key -- local key exchange public key
Aliased pre-existing SSL_get_server_tmp_key(), which was formerly
just for clients, to SSL_get_peer_tmp_key(). Changed internal
calls to use the new name.
Reviewed-by: Matt Caswell <matt@openssl.org>
SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0.
If it was called on the client side then it was ignored. In 1.1.1 it now
makes sense to have a CA list defined for both client and server (the
client now sends it the the TLSv1.3 certificate_authorities extension).
Unfortunately some applications were using the same SSL_CTX for both
clients and servers and this resulted in some client ClientHellos being
excessively large due to the number of certificate authorities being sent.
This commit seperates out the CA list updated by
SSL(_CTX)?_set_client_CA_list() and the more generic
SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list()
still has no effect on the client side. If both CA lists are set then
SSL(_CTX)?_set_client_CA_list() takes priority.
Fixes#7411
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7503)
(cherry picked from commit 9873297900)
The documentation says some commands care, but the code says differently.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7440)
(cherry picked from commit d91d443f0d)
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)
(cherry picked from commit ffd89124bd)
The example code in EVP_DigestInit.pod generates warnings if users try
to compile it.
[skip ci]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7362)
(cherry picked from commit 19ac1bf2de)
Historically (i.e., OpenSSL 1.0.x), the openssl applications would
allow for empty subject attributes to be passed via the -subj argument,
e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`. Commit
db4c08f019 applied a badly needed rewrite
to the parse_name() helper function that parses these strings, but
in the process dropped a check that would skip attributes with no
associated value. As a result, such strings are now treated as
hard errors and the operation fails.
Restore the check to skip empty attribute values and restore
the historical behavior.
Document the behavior for empty subject attribute values in the
corresponding applications' manual pages.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7349)
(cherry picked from commit 3d362f1903)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7356)
(cherry picked from commit 4fef4981f8)
And references to other manpages are also added in openssl(1).
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7314)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7248)
(cherry picked from commit eadde90bff)
This commit documents the OPENSSL_VERSION_TEXT which is currently
missing in the man page.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7301)
(cherry picked from commit 7c69495712)
The latter causes problems when complex.h is #included.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)
(cherry picked from commit 972f67889b)
Fixed a minor typo while reading the documentation.
I agree that this contribution is trivial can be freely used.
CLA: trivial
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7221)