Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7474)
(cherry picked from commit 21311777ad)
Increase the load buffer size such that it exceeds the chunk
size by a comfortable amount. This is done to avoid calling
RAND_add() with a small final chunk. Instead, such a small
final chunk will be added together with the previous chunk
(unless it's the only one).
Related-to: #7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7456)
The failure of RAND_load_file was only noticed because of the
heap corruption which was reported in #7499 and fixed in commit
5b4cb385c1. To prevent this in the future, RAND_load_file()
now explicitly checks RAND_status() and reports an error if it
fails.
Related-to: #7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7456)
This bug was introduced by #7382 which enhanced RAND_add() to
accept large buffer sizes. As a consequence, RAND_add() now fails
for buffer sizes less than 32 bytes (i.e. less than 256 bits).
In addition, rand_drbg_get_entropy() forgets to reset the attached
drbg->pool in the case of an error, which leads to the heap corruption.
The problem occurred with RAND_load_file(), which reads the file in
chunks of 1024 bytes each. If the size of the final chunk is less than
32 bytes, then RAND_add() fails, whence RAND_load_file() fails
silently for buffer sizes n = k * 1024 + r with r = 1,...,31.
This commit fixes the heap corruption only. The other issues will
be addressed in a separate pull request.
Thanks to Gisle Vanem for reporting this issue.
Fixes#7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7455)
(cherry picked from commit 5b4cb385c1)
{make|swap|get|set}context are removed in POSIX.1-2008, but glibc
apparently keeps providing it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7420)
(cherry picked from commit 9d71a24ebf)
Also, some readers of the code find starting the count at 1 for EE
cert confusing (since RFC5280 counts only non-self-issued intermediate
CAs, but we also counted the leaf). Therefore, never count the EE
cert, and adjust the path length comparison accordinly. This may
be more clear to the reader.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit dc5831da59)
At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and
top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph
of above https://tools.ietf.org/html/rfc5280#section-3.3), we see:
This specification covers two classes of certificates: CA
certificates and end entity certificates. CA certificates may be
further divided into three classes: cross-certificates, self-issued
certificates, and self-signed certificates. Cross-certificates are
CA certificates in which the issuer and subject are different
entities. Cross-certificates describe a trust relationship between
the two CAs. Self-issued certificates are CA certificates in which
the issuer and subject are the same entity. Self-issued certificates
are generated to support changes in policy or operations. Self-
signed certificates are self-issued certificates where the digital
signature may be verified by the public key bound into the
certificate. Self-signed certificates are used to convey a public
key for use to begin certification paths. End entity certificates
are issued to subjects that are not authorized to issue certificates.
that the term "self-issued" is only applicable to CAs, not end-entity
certificates. In https://tools.ietf.org/html/rfc5280#section-4.2.1.9
the description of path length constraints says:
The pathLenConstraint field is meaningful only if the cA boolean is
asserted and the key usage extension, if present, asserts the
keyCertSign bit (Section 4.2.1.3). In this case, it gives the
maximum number of non-self-issued intermediate certificates that may
follow this certificate in a valid certification path. (Note: The
last certificate in the certification path is not an intermediate
certificate, and is not included in this limit. Usually, the last
certificate is an end entity certificate, but it can be a CA
certificate.)
This makes it clear that exclusion of self-issued certificates from
the path length count applies only to some *intermediate* CA
certificates. A leaf certificate whether it has identical issuer
and subject or whether it is a CA or not is never part of the
intermediate certificate count. The handling of all leaf certificates
must be the same, in the case of our code to post-increment the
path count by 1, so that we ultimately reach a non-self-issued
intermediate it will be the first one (not zeroth) in the chain
of intermediates.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit ed422a2d01)
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)
(cherry picked from commit ffd89124bd)
In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed()
was implemented by buffering the data in a random pool where it is
picked up later by the rand_drbg_get_entropy() callback. This buffer
was limited to the size of 4096 bytes.
When a larger input was added via RAND_add() or RAND_seed() to the DRBG,
the reseeding failed, but the error returned by the DRBG was ignored
by the two calling functions, which both don't return an error code.
As a consequence, the data provided by the application was effectively
ignored.
This commit fixes the problem by a more efficient implementation which
does not copy the data in memory and by raising the buffer the size limit
to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits
but it was chosen intentionally to avoid platform dependent problems
like integer sizes and/or signed/unsigned conversion.
Additionally, the DRBG is now less permissive on errors: In addition to
pushing a message to the openssl error stack, it enters the error state,
which forces a reinstantiation on next call.
Thanks go to Dr. Falko Strenzke for reporting this issue to the
openssl-security mailing list. After internal discussion the issue
has been categorized as not being security relevant, because the DRBG
reseeds automatically and is fully functional even without additional
randomness provided by the application.
Fixes#7381
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7382)
(cherry picked from commit 3064b55134)
We don't need to use secure clean for public key.
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7363)
(cherry picked from commit c033101db3)
Negative displacement in memory references was not originally specified,
so that for maximum coverage one should abstain from it, just like with
any other extension. [Unless it's guarded by run-time switch, but there
is no switch in keccak1600-s390x.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7239)
(cherry picked from commit fc97c882f4)
Fixes a compiler warning about an unused syscall_random()
and cleans up the OPENSSL_RAND_SEED preprocessor logic.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/779)
(cherry picked from commit d90e128be6)
Should be 2018 instead of 20018.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7364)
We passed that ioctl a pointer to the whole session_op structure,
which wasn't quite right.
Notified by David Legault.
Fixes#7302
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7304)
(cherry picked from commit 470096e576)
The BIO callback handling incorrectly wrote over the return code passed
to the callback, meaning that an incorrect result was (eventually) returned
to the caller.
Fixes#7343
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7344)
(cherry picked from commit d97ce8d9a0)
BIO_s_log() is declared for everyone, so should return NULL when not
actually implemented. Also, it had explicit platform limitations in
util/mkdef.pl that didn't correspond to what was actually in code.
While at it, a few other hard coded things that have lost their
relevance were removed.
include/openssl/ocsp.h had a few duplicate declarations.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7331)
(cherry picked from commit 7e09c5eaa5)
Change all calls to getenv() inside libcrypto to use a new wrapper function
that use secure_getenv() if available and an issetugid then getenv if not.
CPU processor override flags are unchanged.
Extra checks for OPENSSL_issetugid() have been removed in favour of the
safe getenv.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7047)
(cherry picked from commit 5c39a55d04)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7277)
(cherry picked from commit 46d085096c)
This module includes bn.h via other headers, so it picks up the
definition from there and doesn't need to define them locally (any
more?). Worst case scenario, the redefinition may be different and
cause all sorts of compile errors.
Fixes#7227
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7287)
(cherry picked from commit dda5396aae)
These both indicate that the file descriptor we're trying to use as a
terminal isn't, in fact, a terminal.
Fixes#7271
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7272)
(cherry picked from commit 276bf8620c)
The latter causes problems when complex.h is #included.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)
(cherry picked from commit 972f67889b)
It simply isn't available on older versions.
Issue submitted by Mark Daniels
Fixes#7229
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7230)
The new DRBG API added the aforementioned #define. However, it is
used internally only and having it defined publicly does not serve
any purpose except causing potential version compatibility problems.
Fixes#7182
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7190)
(cherry picked from commit c402e943cd)
- fix to use secure URL in generated Windows resources
- fix a potentially uninitialized variable
- fix an unused variable warning
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7189)
Reported by Coverity Scan (CID 1439138)
[extended tests]
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7156)
The deprecated ASN.1 type LONG / ZLONG (incorrectly) produced zero
length INTEGER encoding for zeroes. For the sake of backward
compatibility, we allow those to be read without fault when using the
replacement types INT32 / UINT32 / INT64 / UINT64.
Fixes#7134
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7144)
This was originally part of SipHash_Init. However, there are cases
where there isn't any key material to initialize from when setting the
hash size, and we do allow doing so with a EVP_PKEY control. The
solution is to provide a separate hash_size setter and to use it in
the corresponding EVP_PKEY_METHOD.
Fixes#7143
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7145)
zero-length ID is allowed, but it's not allowed to skip the ID.
Fixes: #6534
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
Thus users can use this function to set customized EVP_PKEY_CTX to
EVP_MD_CTX structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
