When compiling with --strict-warnings using gcc 7.4.0 the compiler
complains that a case falls through, even though there is an explicit
comment stating this. Moving the comment outside of the conditional
compilation section resolves this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9131)
(cherry picked from commit a2e520447e)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9123)
(cherry picked from commit e98e586b31)
ae3947de09 changed the callback arg not to have a const parameter.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9104)
(cherry picked from commit 7588660a53)
The lookup for ::1 with getaddrinfo() might return error even if
the ::1 would work if AI_ADDRCONFIG flag is used.
Fixes: #9053
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9108)
(cherry picked from commit 3f91ede9ae)
The DEVRANDOM_WAIT feature added a select() call to wait for the
`/dev/random` device to become readable before reading from the
`/dev/urandom` device. It was introduced in commit 38023b87f0
in order to mitigate the fact that the `/dev/urandom` device
does not block until the initial seeding of the kernel CSPRNG
has completed, contrary to the behaviour of the `getrandom()`
system call.
It turned out that this change had negative side effects on
performance which were not acceptable. After some discussion it
was decided to revert this feature and leave it up to the OS
resp. the platform maintainer to ensure a proper initialization
during early boot time.
Fixes#9078
This partially reverts commit 38023b87f0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit a08714e181)
(Merged from https://github.com/openssl/openssl/pull/9118)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9101)
(cherry picked from commit bab6046146)
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9102)
(cherry picked from commit 87762939b5)
In commit 2b8fa1d56c the version-specific SSL/TLS methods were
deprecated. This patch improves the documentation of that change
by stating the deprecation more prominently in the manual page
and explaining the reason for the deprecation.
Fixes#8989
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9001)
(cherry picked from commit f308fa2573)
The 4 kB SPACE_SYS_STR_REASONS in crypto/err/err.c isn't enough for some locales.
The Russian locales consume 6856 bytes, Ukrainian even 7000.
build_SYS_str_reasons() contains an overflow check:
if (cnt > sizeof(strerror_pool))
cnt = sizeof(strerror_pool);
But since commit 9f15e5b911 it no longer
works as cnt is incremented once more after the condition.
cnt greater than sizeof(strerror_pool) results in an unbounded
OPENSSL_strlcpy() in openssl_strerror_r(), eventually causing a crash.
When the first received error string was empty or contained only
spaces, cur would move in front of the start of the strerror_pool.
Also don't call openssl_strerror_r when the pool is full.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/8966)
(cherry picked from commit fac9200a88)
The DEBUG_SAFESTACK preprocessor define is obsolete since 2008
when the non-safestack code was removed by commit 985de86340.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9070)
(cherry picked from commit d4f63f1c39)
If we receive a KeyUpdate message (update requested) from the peer while
we are in the middle of a write, we should defer sending the responding
KeyUpdate message until after the current write is complete. We do this
by waiting to send the KeyUpdate until the next time we write and there is
no pending write data.
This does imply a subtle change in behaviour. Firstly the responding
KeyUpdate message won't be sent straight away as it is now. Secondly if
the peer sends multiple KeyUpdates without us doing any writing then we
will only send one response, as opposed to previously where we sent a
response for each KeyUpdate received.
Fixes#8677
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8773)
(cherry picked from commit feb9e31c40)
Fixes#8923
Found using the openssl cms -resign option.
This uses an alternate path to do the signing which was not adding the required signed attribute
content type. The content type attribute should always exist since it is required is there are
any signed attributes.
As the signing time attribute is always added in code, the content type attribute is also required.
The CMS_si_check_attributes() method adds validity checks for signed and unsigned attributes
e.g. The message digest attribute is a signed attribute that must exist if any signed attributes
exist, it cannot be an unsigned attribute and there must only be one instance containing a single
value.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8944)
(cherry picked from commit 19e512a824)
Minor typo.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8866)
(cherry picked from commit 3527cfcf28)
Method name correction.
CLA: trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9052)
(cherry picked from commit 3c9a8d4a51)
openssl_config_int() returns the uninitialized variable `ret`
when compiled with OPENSSL_SYS_UEFI.
Fixes#9026
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9029)
(cherry picked from commit f4a96507fb)
CLA: trivial
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9021)
(cherry picked from commit ea8d07b155)
The #7408 implemented mandatory digest checking in TLS.
However this broke compatibility of DSS support with GnuTLS
which supports only SHA1 with DSS.
There is no reason why SHA256 would be a mandatory digest
for DSA as other digests in SHA family can be used as well.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9015)
(cherry picked from commit cd4c83b524)
OpenSSL 1.1.1's Configure treats the strings in @disablables as regexps,
which means that the 'buildtest-c++' option needs a bit of escaping to
be interpreted as intended.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9016)
We add the extra warning and sanitizer options to check our code,
which is entirely in C. We support C++ compilers uniquely for the
sake of certain external test suites, and those projects can probably
sanitize their own code themselves.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9013)
(cherry picked from commit 3b437400d9)
The documentation of what a X509_LOOKUP implementation must do was
unclear and confusing. Most of all, clarification was needed that it
must store away the found objects in the X509_STORE.
Fixes#8707
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8755)
(cherry picked from commit 19f43f02aa)
Add a few coverage test case.
Fixes#8949
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8959)
(cherry picked from commit 5b3accde60)
e.g. openssl speed -evp id-aes256-wrap-pad
was crashing because the return code from EVP_CipherInit_ex
was ignored.
Not going to allow that cipher mode because wrap ciphers
produces more bytes output than the input length
and EVP_Update_loop is not really prepared for that.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8739)
(cherry picked from commit 5d238a1032)
This imports all of the NIST CAVS test vectors for CCM (SP800-38C) and
coverts them for use within evp_test. This commit also adds a script to
convert the .rsp CAVS files into the evp_test format.
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8981)
(cherry picked from commit ecb0f148a9)
67c81ec311 forgot about s390x
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8971)
(cherry picked from commit 887e22dd8b)
This function only returns a status and does not modify the parameter.
Since similar function are already taking const parameters, also
change this function to have a const parameter.
Fixes#8934
CLA: trivial
Signed-off-by: Arne Schwabe <arne@rfc2549.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8945)
(cherry picked from commit c04b66b18d)
