SHARED_SOURCE is reserved for products that are expected to come in
dual shared / non-shared form, i.e. the routine libraries like
libcrypto and libssl, to distinguish source that should only appear in
their shared form.
Modules are always shared, so there's no need for them to have this
type of distinction.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8623)
The naming of generated assembler wasn't done quite right. There are
assembler files that are generated from a perl script, and there are
those who are not. Only the former must be renamed to the platform
specific asm extension.
Furthermore, we need to make sure that 'OSSL_provider_init' isn't case
sensitive on VMS, to allow for the least surprise for provider
builders.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8529)
These will be used to point out general OpenSSL modules directory.
ENGINE modules are kept apart for backward compatibility.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8287)
The AIX binder needs to be instructed that the output will have no entry
point (see AIX' ld manual: -e in the Flags section; autoexp and noentry
in the Binder section).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8282)
When reworking the way library file names and extensions were formed,
AIX was lost in the process. This restores the previous
functionality.
Fixes#8156
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8162)
This function is designed to use $config{shlib_version} directly
instead of taking an input argument, yet the BASE variant didn't do
this.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8146)
The only thing that makes an ENGINE module special is its entry
points. Other than that, it's a normal dynamically loadable module,
nothing special about it. This change has us stop pretending anything
else.
We retain using ENGINE as a term for installation, because it's
related to a specific installation directory, and we therefore also
mark ENGINE modules specifically as such with an attribute in the
build.info files.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8147)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
It was an ugly hack to avoid certain problems that are no more.
Also added GENERATE lines for perlasm scripts that didn't have that
explicitly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8125)
There was a hack specifically for VMS, which involved setting a make
variable to indicate that test/libtestutil contains a 'main'.
Instead, we use the new attributes 'has_main' to indicate this, and
let the VMS build file template fend with it appropriately.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8125)
VMS doesn't currently support unloading of shared object, and we need
to reflect that. Without this, the shlibload test fails
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8131)
It apepars that ANDROID_NDK_HOME is the recommended standard
environment variable for the NDK.
We retain ANDROID_NDK as a fallback.
Fixes#8101
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8103)
For good measure, we pass down attributes when calling obj2shlib,
obj2lib, obj2dso, obj2bin, or in2script. We currently don't use them
in our build file templates, but might as well for future use.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
We have two classes of scripts to be installed, those that are
installed as "normal" programs, and those that are installed as "misc"
scripts. These classes are installed in different locations, so the
build file templates must pay attention.
Because we didn't have the tools to indicate what scripts go where, we
had these scripts hard coded in the build template files, with the
maintenance issues that may cause. Now that we have attributes, those
can be used to classify the installed scripts, and have the build file
templates simply check the attributes to know what's what.
Furthermore, the 'tsget.pl' script exists both as 'tsget.pl' and
'tsget', which is done by installing a symbolic link (or copy). This
link name is now given through an attribute, which results in even
less hard coding in the Unix Makefile template.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
This means that all PROGRAMS_NO_INST, LIBS_NO_INST, ENGINES_NO_INST
and SCRIPTS_NO_INST are changed to be PROGRAM, LIBS, ENGINES and
SCRIPTS with the associated attribute 'noinst'.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
Now that we have the names of libraries on different systems
established through platform modules, we can remove the old structure
to establish the same thing, i.e. $unified_info{sharednames} and
$unified_info{rename}. That means removing support for the RENAME and
SHARED_NAME keywords in build.info as well.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
Add platform::Unix, which is a generic Unix module to support product
name and extensions functionlity. However, this isn't quite enough,
as mingw and Cygwin builds are done using the same templates, but
since shared libraries work as on Windows and are named accordingly,
platform::mingw and platform::Cygwin were also added to provide the
necessary tweaks.
This reworks Configurations/unix-Makefile.tmpl to work out product
names in platform::Unix et al terms. In this one, we currently do
care about the *_extension config attributes, and the modules adapt
accordingly where it matters.
This change also affected crypto/include/internal/dso_conf.h.in, since
the DSO extension is meant to be the same as the short shared library
extension, which isn't '.so' everywhere.
'shared_extension' attributes that had the value
'.so.\$(SHLIB_VERSION_NUMBER)' are removed, platform::Unix provides
an extension where the shared library version number is hard-coded
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
Add platform::VMS, which is a generic VMS module. Additional modules
to support specific building aspects (such as specific compilers) may
be added later, but since we currently work on file names and those
are generic enough, this is also enough.
This reworks Configurations/descrip.mms.tmpl to work out product names
in platform::VMS terms. Something to be noted is that the new
functionality ignores the *_extension config attributes, as they were
never used. VMS is very consistent in its use of extensions, so there
is no reason to believe much will change in this respect.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
Add platform::Windows, which is a generic Windows module, and
platform::Windows::MSVC, which is a module specifically for MS Visual
C.
This reworks Configurations/windows-makeffile.tmpl to work out product
names in platform::Windows. Something to be noted is that the new
functionality ignores the *_extension config attributes, as they were
never used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
This is the start of a major work to correct some quirks in the
buiding system. The base for this is to move certain attributes that
lack desired flexibility from Configurations/*.conf to perl modules
that can be selected with one single attribute in the config targets.
The way this is meant to work is by adding this attribute in select
config targets:
perl_module => 'Name'; # Name to be replaced
Then, in the perl scripts or modules that need the functionality,
these lines should be added:
use lib catdir($srcdir, 'Configurations'); # Ensure access to platform.pm
use lib $blddir; # Ensure access to configdata.pm
use platform; # Will load platform::$target{perl_module}
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
It turned out that .S files aren't to be treated as lightly as I
thought. They need to go through a preprocessing step, which .s files
don't need to.
Corrects #7703
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7889)
Since `$config{version}` and `$config{version_num}` were removed
in commit 3a63dbef15, the configure output displays an empty
version number string in parentheses instead of the version number.
This pull request fixes that by adding new config variables
`version` and `full_version`, analogous to `OPENSSL_VERSION_STR`
and `OPENSSL_FULL_VERSION_STR`.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7841)
We're strictly use version numbers of the form MAJOR.MINOR.PATCH.
Letter releases are things of days past.
The most central change is that we now express the version number with
three macros, one for each part of the version number:
OPENSSL_VERSION_MAJOR
OPENSSL_VERSION_MINOR
OPENSSL_VERSION_PATCH
We also provide two additional macros to express pre-release and build
metadata information (also specified in semantic versioning):
OPENSSL_VERSION_PRE_RELEASE
OPENSSL_VERSION_BUILD_METADATA
To get the library's idea of all those values, we introduce the
following functions:
unsigned int OPENSSL_version_major(void);
unsigned int OPENSSL_version_minor(void);
unsigned int OPENSSL_version_patch(void);
const char *OPENSSL_version_pre_release(void);
const char *OPENSSL_version_build_metadata(void);
Additionally, for shared library versioning (which is out of scope in
semantic versioning, but that we still need):
OPENSSL_SHLIB_VERSION
We also provide a macro that contains the release date. This is not
part of the version number, but is extra information that we want to
be able to display:
OPENSSL_RELEASE_DATE
Finally, also provide the following convenience functions:
const char *OPENSSL_version_text(void);
const char *OPENSSL_version_text_full(void);
The following macros and functions are deprecated, and while currently
existing for backward compatibility, they are expected to disappear:
OPENSSL_VERSION_NUMBER
OPENSSL_VERSION_TEXT
OPENSSL_VERSION
OpenSSL_version_num()
OpenSSL_version()
Also, this function is introduced to replace OpenSSL_version() for all
indexes except for OPENSSL_VERSION:
OPENSSL_info()
For configuration, the option 'newversion-only' is added to disable all
the macros and functions that are mentioned as deprecated above.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
It's being replaced with constant-time alternative.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
We only convert lowercase .s to .asm, that turned out not to be sufficient.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7703)
Mingw and Cygwin builds install the DLLs in the application directory,
not the library directory, so ensure that one is created for them when
installing the DLLs.
Fixes#7653
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7654)
