Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
This guards against the name constraints check consuming large amounts
of CPU time when certificates in the presented chain contain an
excessive number of names (specifically subject email names or subject
alternative DNS names) and/or name constraints.
Name constraints checking compares the names presented in a certificate
against the name constraints included in a certificate higher up in the
chain using two nested for loops.
Move the name constraints check so that it happens after signature
verification so peers cannot exploit this using a chain with invalid
signatures. Also impose a hard limit on the number of name constraints
check loop iterations to further mitigate the issue.
Thanks to NCC for finding this issue. Fix written by Martin Kreichgauer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4393)
Remove some incorrect copyright references.
Move copyright to standard place
Add OpenSSL copyright where missing.
Remove copyrighted file that we don't use any more
Remove Itanium assembler for RC4 and MD5 (assembler versions of old and
weak algorithms for an old chip)
Standardize apps/rehash copyright comment; approved by Timo
Put dual-copyright notice on mkcert
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3691)
To test X509_check_private_key and relatives.
Add a CSR and corresponding RSA private key to test
X509_REQ_check_private_key function.
Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3614)
Add Ed25519 certificate verify test using certificate from
draft-ietf-curdle-pkix-04 and custom generated root certificate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3503)
The CA names should be printed according to user's decision
print_name instead of set of BIO_printf
dump_cert_text instead of set of BIO_printf
Testing cyrillic output of X509_CRL_print_ex
Write and use X509_CRL_print_ex
Reduce usage of X509_NAME_online
Using X509_REQ_print_ex instead of X509_REQ_print
Fix nameopt processing.
Make dump_cert_text nameopt-friendly
Move nameopt getter/setter to apps/apps.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3262)
The only SSL tests prior to this tested using certificates with no
embedded Signed Certificate Timestamps (SCTs), which meant they couldn't
confirm whether Certificate Transparency checks in "strict" mode were
working.
These tests reveal a bug in the validation of SCT timestamps, which is
fixed by the next commit.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3138)
Using a cert with Cyrillic characters, kindly supplied by Dmitry Belyavsky
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2943)
subject alternate names.
Add nameConstraints tests incluing DNS, IP and email tests both in
subject alt name extension and subject name.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This extends 'req' to take more than one DN component, and to take
them as full DN components and not just CN values. All other commands
are changed to pass "CN = $cn" instead of just a CN value.
This adds 'genpc', which differs from the other 'gen*' commands by not
calling 'req', and expect the result from 'req' to come through stdin.
Finally, test/certs/setup.sh gets the commands needed to generate a
few proxy certificates.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Port client auth tests to the new framework, add coverage. The old tests
were only testing success, and only for some protocol versions; the new
tests add all protocol versions and various failure modes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Previously, it was sufficient to have certSign in keyUsage when the
basicConstraints extension was missing. That is still accepted in
a trust anchor, but is no longer accepted in an intermediate CA.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Specifies a callback that will, in the future, be used by the SSL code to
decide whether to abort a connection on Certificate Transparency grounds.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails. However, this only happened when verification
failed during chain construction. Errors in verification of the
constructed chain did not have the intended effect on these functions.
This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails. Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail. They must of course first check
and save the real error, and restore the original error as quickly
as possible. Hiding by default seems to be the safer interface.
Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED.
This also changes the "-brief" output from s_client to include
verification results and TLSA match information.
Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).
Added a few more test-cases to danetest, that exercise the new
code.
Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().
Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error. [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: Rich Salz <rsalz@openssl.org>
When auxiliary data contains only reject entries, continue to trust
self-signed objects just as when no auxiliary data is present.
This makes it possible to reject specific uses without changing
what's accepted (and thus overring the underlying EKU).
Added new supported certs and doubled test count from 38 to 76.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
These can be re-generated via:
cd test/certs; ./setup.sh
if need be. The keys are all RSA 2048-bit keys, but it is possible
to change that via environment variables.
cd test/certs
rm -f *-key.pem *-key2.pem
OPENSSL_KEYALG=rsa OPENSSL_KEYBITS=3072 ./setup.sh
cd test/certs
rm -f *-key.pem *-key2.pem
OPENSSL_KEYALG=ecdsa OPENSSL_KEYBITS=secp384r1 ./setup.sh
...
Keys are re-used if already present, so the environment variables
are only used when generating any keys that are missing. Hence
the "rm -f"
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds a test for CVE-2015-1793. This adds a new test file
verify_extra_test.c, which could form the basis for additional
verification tests.
Reviewed-by: Stephen Henson <steve@openssl.org>
