If no serverinfo extension is found in some cases, do not abort the handshake,
but simply omit/skip that extension.
Check for already-registered serverinfo callbacks during serverinfo
registration.
Update SSL_CTX_use_serverinfo() documentation to mention the need to reload the
same serverinfo per certificate, for servers with multiple server certificates.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Building with -DCHARSET_EBCDIC and using --strict-warnings resulted in
lots of miscellaneous errors. This fixes it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The tls_client_key_exchange_post_work() frees the pms on error. It also
calls ssl_generate_master_secret() which also free the pms. If an error
occurs after ssl_generate_master_secret() has been called then a double
free can occur.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The variables in the BIO weren't being duplicated properly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The i2d_X509() function can return a negative value on error. Therefore
we should make sure we check it.
Issue reported by Yuan Jochen Kang.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
It is up to the caller of SSL_dane_tlsa_add() to take appropriate
action when no records are added successfully or adding some records
triggers an internal error (negative return value).
With this change the caller can continue with PKIX if desired when
none of the TLSA records are usable, or take some appropriate action
if DANE is required.
Also fixed the internal ssl_dane_dup() function to properly initialize
the TLSA RR stack in the target SSL handle. Errors in ssl_dane_dup()
are no longer ignored.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If we fail halfway through constructing the peer_tmp EVP_PKEY but we have
already stored it in s->s3->peer_tmp then if anything tries to use it then
it will likely fail. This was causing s_client to core dump in the
sslskewith0p test. s_client was trying to print out the connection
parameters that it had negotiated so far. Arguably s_client should not do
that if the connection has failed...but given it is existing functionality
it's easier to fix libssl.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make OBJ_name_cmp internal
Rename idea_xxx to IDEA_xxx
Rename get_rfc_xxx to BN_get_rfc_xxx
Rename v3_addr and v3_asid functions to X509v3_...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_COMP_free_compression_methods() should not be called expicitly - we
should leave auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
ERR_free_strings() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add an accessor for SSL_CTX.
Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function pqueue_print is not exported and is never called. Therefore
we should delete it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The original check for != SSL_VERIFY_NONE can give surprising results
when flags SSL_VERIFY_PEER is not set, but other flags are. Note
that SSL_VERIFY_NONE (0) is not a flag bit, it is rather the absense
of all other flag bits.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Free up parsed X509_NAME structure if the CertificateRequest message
contains excess data.
The security impact is considered insignificant. This is a client side
only leak and a large number of connections to malicious servers would
be needed to have a significant impact.
This was found by libFuzzer.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Move the the BIO_METHOD and BIO structures into internal header files,
provide appropriate accessor methods and update all internal code to use
the new accessors where appropriate.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Session resumption involves a version check, so version negotiation must
happen first. Currently, the DTLS implementation cannot do session
resumption in DTLS 1.0 because the ssl_version check always checks
against 1.2.
Switching the order also removes the need to fixup ssl_version in DTLS
version negotiation.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
RT: #4392, MR: #2452
We now send the highest supported version by the client, even if the session
uses an older version.
This fixes 2 problems:
- When you try to reuse a session but the other side doesn't reuse it and
uses a different protocol version the connection will fail.
- When you're trying to reuse a session with an old version you might be
stuck trying to reuse the old version while both sides support a newer
version
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
GH: #852, MR: #2452
BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the
built-in method tables to live in .rodata.
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If a call to EVP_DecryptUpdate fails then a memory leak could occur.
Ensure that the memory is freed appropriately.
Issue reported by Guido Vranken.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove 'log' field from SCT and related accessors
In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.
Improved documentation for some CT functions in openssl/ssl.h.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Adjust ssl_set_client_hello_version to get both the minimum and maximum and then
make ssl_set_client_hello_version use the maximum version.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595
Copy/paste error between SSL_CIPHER_get_kx_nid() and
SSL_CIPHER_get_auth_nid(), wrong table was referenced
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
CCA8, CCA9, CCAA, CCAB, CCAC, CCAD, and CCAE are now present in
https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml
so remove the "as per draft-ietf-tls-chacha20-poly1305-03" note
accordingly.
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The numpipes argument to ssl3_enc/tls1_enc is actually the number of
records passed in the array. To make this clearer rename the argument to
|n_recs|.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Rename the have_whole_app_data_record_waiting() function to include the
ssl3_record prefix...and make it a bit shorter.
Reviewed-by: Tim Hudson <tjh@openssl.org>
We used to use the wrec field in the record layer for keeping track of the
current record that we are writing out. As part of the pipelining changes
this has been moved to stack allocated variables to do the same thing,
therefore the field is no longer needed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: Tim Hudson <tjh@openssl.org>
This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: Tim Hudson <tjh@openssl.org>
With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed. This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Read pipelining is controlled in a slightly different way than with write
pipelining. While reading we are constrained by the number of records that
the peer (and the network) can provide to us in one go. The more records
we can get in one go the more opportunity we have to parallelise the
processing.
There are two parameters that affect this:
* The number of pipelines that we are willing to process in one go. This is
controlled by max_pipelines (as for write pipelining)
* The size of our read buffer. A subsequent commit will provide an API for
adjusting the size of the buffer.
Another requirement for this to work is that "read_ahead" must be set. The
read_ahead parameter will attempt to read as much data into our read buffer
as the network can provide. Without this set, data is read into the read
buffer on demand. Setting the max_pipelines parameter to a value greater
than 1 will automatically also turn read_ahead on.
Finally, the read pipelining as currently implemented will only parallelise
the processing of application data records. This would only make a
difference for renegotiation so is unlikely to have a significant impact.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.
max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).
split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used
split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Without this, the peer certificate would never be deleted, resulting in
a memory leak.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The init code was using its own "once" implementation. Now that we have
the new thread API we should use that instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Always prefer forward-secure handshakes.
- Consistently order ECDSA above RSA.
- Next, always prefer AEADs to non-AEADs, irrespective of strength.
- Within AEADs, prefer GCM > CHACHA > CCM for a given strength.
- Prefer TLS v1.2 ciphers to legacy ciphers.
- Remove rarely used DSS, IDEA, SEED, CAMELLIA, CCM from the default
list to reduce ClientHello bloat.
Reviewed-by: Rich Salz <rsalz@openssl.org>
