The ongoing discussion about casting or not in PR #5626 had me compiling
again with above mentioned flags. Indeed the compiler had to say something
about it and I did these changes to silence it again.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5943)
Fixes#5849
In pull request #5503 a fallback was added which adds a random nonce of
security_strength/2 bits if no nonce callback is provided. This change raised
the entropy requirements form 256 to 384 bit, which can cause problems on some
platforms (e.g. VMS, see issue #5849).
The requirements for the nonce are given in section 8.6.7 of NIST SP 800-90Ar1:
A nonce may be required in the construction of a seed during instantiation
in order to provide a security cushion to block certain attacks.
The nonce shall be either:
a) A value with at least (security_strength/2) bits of entropy, or
b) A value that is expected to repeat no more often than a
(security_strength/2)-bit random string would be expected to repeat.
Each nonce shall be unique to the cryptographic module in which instantiation
is performed, but need not be secret. When used, the nonce shall be considered
to be a critical security parameter.
This commit implements a nonce of type b) in order to lower the entropy
requirements during instantiation back to 256 bits.
The formulation "shall be unique to the cryptographic module" above implies
that the nonce needs to be unique among (with high probability) among all
DRBG instances in "space" and "time". We try to achieve this goal by creating a
nonce of the following form
nonce = app-specific-data || high-resolution-utc-timestamp || counter
Where || denotes concatenation. The application specific data can be something
like the process or group id of the application. A utc timestamp is used because
it increases monotonically, provided the system time is synchronized. This approach
may not be perfect yet for a FIPS evaluation, but it should be good enough for the
moment.
This commit also harmonizes the implementation of the get_nonce() and the
get_additional_data() callbacks and moves the platform specific parts from
rand_lib.c into rand_unix.c, rand_win.c, and rand_vms.c.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5920)
Historically we used to implement standalone base64 code for SRP. This
was replaced by commit 3d3f21aa with the standard base64 processing code.
However, the SRP base64 code was designed to be compatible with other SRP
libraries (notably libsrp, but also others) that use a variant of standard
base64. Specifically a different alphabet is used and no padding '='
characters are used. Instead 0 padding is added to the front of the string.
By changing to standard base64 we change the behaviour of the API which may
impact interoperability. It also means that SRP verifier files created prior
to 1.1.1 would not be readable in 1.1.1 and vice versa.
Instead we expand our standard base64 processing with the capability to be
able to read and generate the SRP base64 variant.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5925)
Previously they were using EVP_EncodeBlock/EVP_DecodeBlock. These are low
level functions that do not handle padding characters. This was causing
the SRP code to fail. One side effect of using EVP_EncodeUpdate is that
it inserts newlines which is not what we need in SRP so we add a flag to
avoid that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5925)
The warning reads "[cast] may cause misaligned access". Even though
this can be application-supplied pointer, misaligned access shouldn't
happen, because structure type is "encoded" into data itself, and
application would customarily pass correctly aligned pointer. But
there is no harm in resolving the warning...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5894)
Fixes#5778, #5840
The various IS_*() macros did not work correctly for 8-bit ASCII
characters with the high bit set, because the CVT(a) preprocessor
macro and'ed the given ASCII value with 0x7F, effectively folding
the high value range 128-255 over the low value range 0-127.
As a consequence, some of the IS_*() erroneously returned TRUE.
This commit fixes the issue by adding range checks instead of
cutting off high order bits using a mask. In order avoid multiple
evaluation of macro arguments, most of the implementation was moved
from macros into a static function is_keytype().
Thanks to Румен Петров for reporting and analyzing the UTF-8 parsing
issue #5840.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5903)
Adding support for these operations for the EdDSA implementations
makes pkeyutl usable for signing/verifying for these algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5880)
The wrong "set" field was incremented in the wrong place and would
create a new RDN, not a multi-valued RDN.
RDN inserts would happen after not before.
Prepending an entry to an RDN incorrectly created a new RDN
Anything which built up an X509_NAME could get a messed-up structure,
which would then be "wrong" for anyone using that name.
Thanks to Ingo Schwarze for extensive debugging and the initial
fix (documented in GitHub issue #5870).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5882)
There are two undocumented DSA parameter generation options available in
the genpkey command line app:
dsa_paramgen_md and dsa_paramgen_q_bits.
These can also be accessed via the EVP API but only by using
EVP_PKEY_CTX_ctrl() or EVP_PKEY_CTX_ctrl_str() directly. There are no
helper macros for these options.
dsa_paramgen_q_bits sets the length of q in bits (default 160 bits).
dsa_paramgen_md sets the digest that is used during the parameter
generation (default SHA1). In particular the output length of the digest
used must be equal to or greater than the number of bits in q because of
this code:
if (!EVP_Digest(seed, qsize, md, NULL, evpmd, NULL))
goto err;
if (!EVP_Digest(buf, qsize, buf2, NULL, evpmd, NULL))
goto err;
for (i = 0; i < qsize; i++)
md[i] ^= buf2[i];
/* step 3 */
md[0] |= 0x80;
md[qsize - 1] |= 0x01;
if (!BN_bin2bn(md, qsize, q))
goto err;
qsize here is the number of bits in q and evpmd is the digest set via
dsa_paramgen_md. md and buf2 are buffers of length SHA256_DIGEST_LENGTH.
buf2 has been filled with qsize bits of random seed data, and md is
uninitialised.
If the output size of evpmd is less than qsize then the line "md[i] ^=
buf2[i]" will be xoring an uninitialised value and the random seed data
together to form the least significant bits of q (and not using the
output of the digest at all for those bits) - which is probably not what
was intended. The same seed is then used as an input to generating p. If
the uninitialised data is actually all zeros (as seems quite likely)
then the least significant bits of q will exactly match the least
significant bits of the seed.
This problem only occurs if you use these undocumented and difficult to
find options and you set the size of q to be greater than the message
digest output size. This is for parameter generation only not key
generation. This scenario is considered highly unlikely and
therefore the security risk of this is considered negligible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5800)
The GOST engine needs to be loaded before we initialise libssl. Otherwise
the GOST ciphersuites are not enabled. However the SSL conf module must
be loaded before we initialise libcrypto. Otherwise we will fail to read
the SSL config from a config file properly.
Another problem is that an application may make use of both libcrypto and
libssl. If it performs libcrypto stuff first and OPENSSL_init_crypto()
is called and loads a config file it will fail if that config file has
any libssl stuff in it.
This commit separates out the loading of the SSL conf module from the
interpretation of its contents. The loading piece doesn't know anything
about SSL so this can be moved to libcrypto. The interpretation of what it
means remains in libssl. This means we can load the SSL conf data before
libssl is there and interpret it when it later becomes available.
Fixes#5809
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5818)
When these two functions returned zero, it could mean:
1. that an error occured. In their case, the error is an overflow of
the pool, i.e. the correct response from the caller would be to
stop trying to fill the pool.
2. that there isn't enought entropy acquired yet, i.e. the correct
response from the caller would be to try and add more entropy to
the pool.
Because of this ambiguity, the returned zero turns out to be useless.
This change makes the returned value more consistent. 1 means the
addition of new entropy was successful, 0 means it wasn't. To know if
the pool has been filled enough, the caller will have to call some
other function, such as rand_pool_entropy_available().
Fixes#5846
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5876)
felem_neg does not produce an output within the tight bounds suitable
for felem_contract. This affects build configurations which set
enable-ec_nistp_64_gcc_128.
point_double and point_add, in the non-z*_is_zero cases, tolerate and
fix up the wider bounds, so this only affects point_add calls where the
other point is infinity. Thus it only affects the final addition in
arbitrary-point multiplication, giving the wrong y-coordinate. This is a
no-op for ECDH and ECDSA, which only use the x-coordinate of
arbitrary-point operations.
Note: ecp_nistp521.c has the same issue in that the documented
preconditions are violated by the test case. I have not addressed this
in this PR. ecp_nistp521.c does not immediately produce the wrong
answer; felem_contract there appears to be a bit more tolerant than its
documented preconditions. However, I haven't checked the point_add
property above holds. ecp_nistp521.c should either get this same fix, to
be conservative, or have the bounds analysis and comments reworked for
the wider bounds.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5779)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5625)
Fail harshly (in debug builds) when rand_pool_acquire_entropy isn't
delivering the required amount of entropy. In release builds, this
produces an error with details.
We also take the opportunity to modernise the types used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5857)
Where a CMS detached signature is used with text content the text goes
through a canonicalisation process first prior to signing or verifying a
signature. This process strips trailing space at the end of lines, converts
line terminators to CRLF and removes additional trailing line terminators
at the end of a file. A bug in the canonicalisation process meant that
some characters, such as form-feed, were incorrectly treated as whitespace
and removed. This is contrary to the specification (RFC5485). This fix
could mean that detached text data signed with an earlier version of
OpenSSL 1.1.0 may fail to verify using the fixed version, or text data
signed with a fixed OpenSSL may fail to verify with an earlier version of
OpenSSL 1.1.0. A workaround is to only verify the canonicalised text data
and use the "-binary" flag (for the "cms" command line application) or set
the SMIME_BINARY/PKCS7_BINARY/CMS_BINARY flags (if using CMS_verify()).
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5790)
It looks like the usage of these functions were removed in
in commit 0a4edb931b ("Unified - adapt
the generation of cpuid, uplink and buildinf to use GENERATE").
This commit removes the import/use of File::Spec::Functions module as it
is no longer needed by crypto/build.info.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5832)
If a nonce is required and the get_nonce callback is NULL, request 50%
more entropy following NIST SP800-90Ar1 section 9.1.
Reviewed-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #5503
This commit removes the contribution of a user that we cannot
trace to gain their consent for the licence change.
I also cleaned up the return/error-return flow a bit.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5811)
The RAND_DRBG API was added in PR #5462 and modified by PR #5547.
This commit adds the corresponding documention.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5461)
Add some more exposition on why unlocked access to the global rand_fork_count
is safe, and provide a comment for the struct rand_drbg_st fork_count field.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/4110)
The VMS C RTL has setbuf() working for short pointers only, probably
the FILE pointer will always be in P0 (the lower 4GB). Fortunately,
this only generates a warning about possible data loss (doesn't apply
in this case) that we can simply turn off.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5789)
... to compute s390x aes function code from keylength.
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5250)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5250)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5250)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5250)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5250)
This commit removes the contribution of a user that we cannot trace to
gain their consent for the licence change.
After this commit the various IS_*() macros in the auto-generated file
conf_def.h may incorrectly return true if the supplied character has its
most significant bit set. The IS_*() macros should be able to correctly
handle 8-bit characters. Note that UTF-8 support is not a requirement.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5767)
ts/ts_rsp_sign.c: change to OPENSSL_gmtime.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5720)
Apparently applications rely on RAND_load_file's ability to work with
non-regular files, customarily with /dev/urandom, so that the ban was
not exactly appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5737)
This removes some code because we cannot trace the original contributor
to get their agreement for the licence change (original commit e03ddfae).
After this change there will be numerous failures in the test cases until
someone rewrites the missing code.
All *_free functions should accept a NULL parameter. After this change
the following *_free functions will fail if a NULL parameter is passed:
BIO_ACCEPT_free()
BIO_CONNECT_free()
BN_BLINDING_free()
BN_CTX_free()
BN_MONT_CTX_free()
BN_RECP_CTX_free()
BUF_MEM_free()
COMP_CTX_free()
ERR_STATE_free()
TXT_DB_free()
X509_STORE_free()
ssl3_free()
ssl_cert_free()
SSL_SESSION_free()
SSL_free()
[skip ci]
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
If we don't have OID data for an object then we should fail if we
are asked to encode the ASN.1 for that OID.
Fixes#5723
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5725)
Constructed types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. Therefore we limit the stack depth.
CVE-2018-0739
Credit to OSSFuzz for finding this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
