These functions are similar to SSL_CTX_set_cookie_{generate,verify}_cb,
but used for the application-controlled portion of TLS1.3 stateless
handshake cookies rather than entire DTLSv1 cookies.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5463)
If a mem allocation failed we would ignore it. This commit fixes it to
always check.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5596)
The ossl_shim doesn't know about TLSv1.3 so we should disable that
protocol version for all tests for now.
This fixes the current Travis failures.
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5593)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
So far assembly modules were built as .pl->.S->.s followed by .s->.o.
This posed a problem in build_all_generated rule if it was executed
on another computer. So we change rule sequence to .pl->.S and then
.S->.s->.o.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5573)
There are things depending on configdata.pm. However, it's perfectly
possible that there is one in the source directory from a previous
build, and that might disrupt an out of source build. To avoid this
conflict, make sure never to use the source tree configdata.pm in that
case, i.e. make the hard assumption that it's a generated file in the
build tree, which it is.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5546)
When generating the correct inclusion directory for DEPEND, we mangled
it to be relative to the build or the source directory. However, the
value we handle already come with a correct directory, so we only need
to use it as is.
Fixes#5543
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5546)
The introduction of thread local public and private DRBG instances (#5547)
makes it very cumbersome to change the reseeding (time) intervals for
those instances. This commit provides a function to set the default
values for all subsequently created DRBG instances.
int RAND_DRBG_set_reseed_defaults(
unsigned int master_reseed_interval,
unsigned int slave_reseed_interval,
time_t master_reseed_time_interval,
time_t slave_reseed_time_interval
);
The function is intended only to be used during application initialization,
before any threads are created and before any random bytes are generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5576)
Commit abe256e795 changed the config target
element from 'cxx' to 'CXX'; catch up accordingly.
Also use a space to offset the template boundary, per convention.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5577)
X509_STORE_set_verify_cb_func.pod has documentation for various callbacks
and function pointers that can be set and retrieved, but neither it nor
X509_STORE_new has much documentation for the actual purpose and usage
of X509_STORE objects. Remedy this disparity with new documentation
for adding certificates and CRLs, expected usage, and for modifying
the default verifification behavior.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3958)
Remove a space from a whitespace-only line.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5575)
At the core of things is the concept that each extension is only
defined in certain context(s) -- the ClientHello, EncryptedExtensions,
etc., and sometimes only for a specific protocol or protocol range;
we want to enforce that we only parse or generate extensions in the
context(s) for which they are defined. There is some subtlety here,
in that the protocol version in use is not known when generating the
ClientHello (but it is known when the ClientHello extensions are
being parsed!), so the SSL_IS_TLS13() macro must be used with caution.
Nonetheless, by making assertions about whether we are acting in a
server role and whether the current context is (not) a ClientHello,
we can consolidate almost all of the logic for determining whether
an extension is permitted in a given protocol message, whether we
are generating or parsing that message.
The only logic that remains separate relates to generating the ClientHello,
as it depends on an external factor (the maximum permitted TLS version) that
is not defined in the parsing context.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2945)
The get_name() helper was using a variable of type size_t to hold the
result of BIO_gets(), but BIO_gets() returns int and makes use of negative
values to indicate error conditions.
Change the type of the local variable to match, and propagate that
through to other places in the file to avoid -Wsign-compare issues.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5211)
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
$target{build_scheme} consists of fixed number of elements with 3rd
element denoting VC install-path "flavour", i.e. where to install things.
Instead of looking at 3rd, let's look at last. This allows to override
flavour from template in a simple way.
Configurations/10-main.conf: define generic "flavour" in VC-common
template. Since VC-W32 was the only recognized "flavour", remove
"flavour" definitions from all targets/templates, but VC-WIN32. And
rename VC-W32 to VC-WOW.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5502)
We're currently using the attributes 'defines', 'cppflags', 'cflags'
etc quite liberally, with no regard for where that ends up. Quite a
few of those flags are actually only relevant for the libraries
(mostly libcrypto), so it's safe to say that those could be applied to
the libraries only.
So, we move some of those flags to 'lib_defines', 'lib_cppflags',
'lib_cflags', etc.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5560)
We also default to SHA256 as per the spec if we do not have an explicit
digest defined.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5554)
Travis-ci log output is huge and overflows internal travis-ci view,
which makes it hard to find errors.
Redirect some output to a file and dump it only if it fails.
Remove "v" option from tar that builds and extracts the srcdist.
While running the tests manually, some non-POSIX (bashisms) with ==
vs = came to light.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5555)
The check to detect if env / make variables conflicted with compiler /
linker flags on the configure command line went a little too far, and
would stop the configuration process if any such command line flag was
given, with no regard for the env / make variables at all.
This change refines the check so the stop only gets triggered if any
such flags were given AND any of the corresponding variables are set.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5561)
Note that this might give surprising results if someone forgets an environment
variable that has been set previously.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
Passing flags "discovered" by 'config' on the command line to
'Configure' mixes them up with flags given by the user. That is
contrary to their intention, so they need to be passed in a different
manner.
Enter the environment variables __CNF_CPPDEFINES, __CNF_CPPINCLUDES,
__CNF_CPPFLAGS, __CNF_CFLAGS, __CNF_CXXFLAGS, __CNF_LDFLAGS, and
__CNF_LDLIBS, initialised by 'config', and then used by Configure to
initialise these %config values: defines, includes, cppflags, cflags,
cxxflags, lflags, and ex_libs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
With the support of "make variables" comes the possibility for the
user to override them. However, we need to make a difference between
defaults that we use (and that should be overridable by the user) and
flags that are crucial for building OpenSSL (should not be
overridable).
Typically, overridable flags are those setting optimization levels,
warnings levels, that kind of thing, while non-overridable flags are,
for example, macros that indicate aspects of how the config target
should be treated, such as L_ENDIAN and B_ENDIAN.
We do that differentiation by allowing upper case attributes in the
config targets, named exactly like the "make variables" we support,
and reserving the lower case attributes for non-overridable project
flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
Because there are already attributes with the dso_ prefix that are
used instead of the corresponding lib_ attributes rather than in
addition to them, it gets confusing to have similar or exactly the
same attributes working with different semantics on Unix.
So we rename those by changing the prefix dso_ to module_, and having
those work just like the shared_ attributes, but for DSOs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5534)
... and add some missing known values.
Sort ssl/tls extension array list
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5304)
This patch fixes two issues in the ia32 RDRAND assembly code that result in a
(possibly significant) loss of entropy.
The first, less significant, issue is that, by returning success as 0 from
OPENSSL_ia32_rdrand() and OPENSSL_ia32_rdseed(), a subtle bias was introduced.
Specifically, because the assembly routine copied the remaining number of
retries over the result when RDRAND/RDSEED returned 'successful but zero', a
bias towards values 1-8 (primarily 8) was introduced.
The second, more worrying issue was that, due to a mixup in registers, when a
buffer that was not size 0 or 1 mod 8 was passed to OPENSSL_ia32_rdrand_bytes
or OPENSSL_ia32_rdseed_bytes, the last (n mod 8) bytes were all the same value.
This issue impacts only the 64-bit variant of the assembly.
This change fixes both issues by first eliminating the only use of
OPENSSL_ia32_rdrand, replacing it with OPENSSL_ia32_rdrand_bytes, and fixes the
register mixup in OPENSSL_ia32_rdrand_bytes. It also adds a sanity test for
OPENSSL_ia32_rdrand_bytes and OPENSSL_ia32_rdseed_bytes to help catch problems
of this nature in the future.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5342)
