Add a test to inject a record from the next epoch during the handshake and
make sure it doesn't get processed immediately.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make maximum fragment length configurable and add various fragmentation
tests, in addition to the existing multi-buffer tests.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In practice, CT isn't really functional without EC anyway, as most logs
use EC keys. So, skip loading the log list with no-ec, and skip CT tests
completely in that conf.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This commit only ports existing tests, and adds some coverage for
resumption. We don't appear to have any handshake tests that cover SCT
validation success, and this commit doesn't change that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In NPN and ALPN, the protocol is renegotiated upon resumption. Test that
resumption picks up changes to the extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Systematically test every server-side version downgrade or upgrade.
Client version upgrade or downgrade could be tested analogously but will
be done in a later change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
subject alternate names.
Add nameConstraints tests incluing DNS, IP and email tests both in
subject alt name extension and subject name.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Observe that the old tests were partly ill-defined:
setting sn_server1 but not sn_server2 in ssltest_old.c does not enable
the SNI callback.
Fix this, and also explicitly test both flavours of SNI mismatch (ignore
/ fatal alert). Tests still pass.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commit fixed a problem where fragmented alerts would cause an
infinite loop. This commit adds a test for these fragmented alerts.
Reviewed-by: Andy Polyakov <appro@openssl.org>
On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.
We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.
This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit adds some session API tests, and in particular tests the
modified behaviour of SSL_set_session() introduced in the last commit. To
do this I have factored out some common code from the asynciotest into a
new ssltestlib.c file. I've also renamed getsettest to sslapitest as this
more closely matches what it now is!
Reviewed-by: Rich Salz <rsalz@openssl.org>
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
The previous commit changed how we handle out-of-context empty records.
This commit adds some tests for the various scenarios. There are three
tests:
1: Check that if we inject an out-of-context empty record then we fail
2: Check that if we inject an in-context empty record then we succeed
3: Check that if we inject too many in-context empty records then we fail.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In rare cases, the shell we run test programs in may have complaints.
Shut those up unless testing verbosely.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Since one generates files that the other depends on, there's no
real reason to keep them separate. Since they were both different
aspects of 'openssl req', the merge ends up in 25-test_req.t.
This also makes cleanup easier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Port client auth tests to the new framework, add coverage. The old tests
were only testing success, and only for some protocol versions; the new
tests add all protocol versions and various failure modes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
If using the msys console then msys attempts to "fix" command line
arguments to convert them from Unix style to Windows style. One of the
things it does is to look for arguments seperated by colons. This it
assumes is a list of file paths, so it replaces the colon with a semi-colon.
This was causing one of our tests to fail when calling the "req" command
line app. We were attempting to create a new DSA key and passing the
argument "dsa:../apps/dsa1024.pem". This is exactly what we intended but
Msys mangles it to "dsa;../apps/dsa1024.pem" and the command fails.
There doesn't seem to be a way to suppress Msys name mangling. Fortunately
we can work around this issue by generating the DSA key in a separate step
by calling "gendsa".
RT#4255
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previous commits fixed the implementation of the %e and %g format
specifiers as well as other issues. This commit adds a test.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This adds an async IO test. There are two test runs. The first one does
a normal handshake with lots of async IO events. The second one does the
same but this time breaks up all the written records into multiple records
of one byte in length. We do this all the way up until the CCS.
Reviewed-by: Andy Polyakov <appro@openssl.org>
In some cases, perl's glob() thinks it needs to return file names with
generation numbers, such as when a file name pattern includes two
periods. Constructing other file names by simple appending to file
names with generation numbers isn't a good idea, so for the VMS case,
just peal the generation numbers if they are there.
Fortunately, this is easy, as the returned generation number delimiter
will always be a semi-colon.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If the server does not send a session ticket extension, it should not then
send the NewSessionTicket message.
If the server sends the session ticket extension, it MUST then send the
NewSessionTicket message.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The old proxy tests test the implementation of an application proxy
policy callback defined in the test itself, which is not particularly
useful.
It is, however, useful to test cert verify overrides in
general. Therefore, replace these tests with tests for cert verify
callback behaviour.
Also glob the ssl test inputs on the .in files to catch missing
generated files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The old cipherlist test in ssltest.c only tests the internal order of
the cipher table, which is pretty useless.
Replace this test with a test that catches inadvertent changes to the
default cipherlist.
Fix run_tests.pl to correctly filter tests that have "list" in their name.
(Also includes a small drive-by fix in .gitignore.)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add tests for ASN.1 INTEGER: invalid tag, valid 0, 1, -1 and 0, -1 with
illegal padding.
Also add ASN1_ANY tests for 0, 1 and -1.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Using ASN1_ITEM tables in d2i_test: this then uses consistent names and
makes it easier to extend.
Add bio, reencode and compare tests.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Our main development platforms are of the Unix family, which doesn't
have the same strictness regarding a shared library being consistent
with the contents of the ld script (.map file, on Linux and Solaris)
as Windows is with the contents of the .def file or VMS is with the
linker symb_vector option.
To eliminate surprises, we therefore need to make sure to check that
the contents of the .map file is matched with the shared library, at
least to check that the shared library isn't missing any symbols that
should be present.
This test isn't absolutely perfect, as it will only check the symbols
that would be present on Linux / Solaris and will therefore miss those
that would only appear on Windows or VMS. On the other hand, those
platform specific are few and far apart in time, so it's not likely
they will pose a problem.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add copyright to most .pl files
This does NOT cover any .pl file that has other copyright in it.
Most of those are Andy's but some are public domain.
Fix typo's in some existing files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The simple reason is that the pre-generated files are mainly for Unix.
The VMS variants look slightly different, so comparing will always fail.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Since OpenSSL::Test only redirects stderr to /dev/null when being run
through non-verbose test harness, this change allows the stderr output
to be displayed when verbosity is requested.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Previously, it was sufficient to have certSign in keyUsage when the
basicConstraints extension was missing. That is still accepted in
a trust anchor, but is no longer accepted in an intermediate CA.
Reviewed-by: Rich Salz <rsalz@openssl.org>
According to documentation, perl's Math::BigInt does floored division,
i.e. the bdiv function does 1 / -4 = -1. OpenSSL's BN_div, as well as
bc, do truncated division, i.e. 1 / -4 = 0.
We need to compensate for that difference in test/recipes/bc.pl to
make sure to verify the bntest results under its own conditions, by
dividing the absolute values of the given numbers and fixup the
result's negativity afterwards.
Closes RT#4485
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
* Clear proposed, along with selected, before looking at ClientHello
* Add test case for above
* Clear NPN seen after selecting ALPN on server
* Minor documentation updates
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
TLSProxy starts s_server and specifies the number of client connects
it should expect. After that s_server is supposed to close down
automatically. However, if another test is then run then TLSProxy
will start a new instance of s_server. If the previous instance
hasn't closed down yet then the new instance can fail to bind to
the socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This commit adds the general verify options of ocsp, verify,
cms, etc. to the openssl timestamping app as suggested by
Stephen N. Henson in [openssl.org #4287]. The conflicting
"-policy" option of "openssl ts" has been renamed to
"-tspolicy". Documentation and tests have been updated.
CAVE: This will break code, which currently uses the "-policy"
option.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
While insignificant on Unix like systems, this is significant on
systems like VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Running test_ssl with HARNESS_VERBOSE results in lots of spurious warnings
about an inability to load the CT config file. This fixes it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
ct_test assumed it's run in the source directory and failed when built
elsewhere. It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.
Test recipe updated to match.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
ct_test assumed it's run in the source directory and failed when built
elsewhere. It still defaults to that, but can be told another story
with the environment variables CT_DIR and CERTS_DIR.
Test recipe updated to match.
Reviewed-by: Matt Caswell <matt@openssl.org>
* Perform ALPN after the SNI callback; the SSL_CTX may change due to
that processing
* Add flags to indicate that we actually sent ALPN, to properly error
out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The new afalg test should have a copyright date of 2016. Also an
incorrect buffer was being sent to EVP_CipherFinal_ex when
decrypting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
1) Simplify code with better PACKET methods.
2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.
3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.
4) Send an alert on ALPN protocol mismatch.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Specifies a callback that will, in the future, be used by the SSL code to
decide whether to abort a connection on Certificate Transparency grounds.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We were kinda sorta using a mix of $disabled{"static-engine" and
$disabled{"dynamic-engine"} in Configure. Let's avoid confusion,
choose one of them and stick to it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
They depend on this feature because they use the engine ossltest,
which is only available as a dynamic engine.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Adapted from BoringSSL. Added a test.
The extension parsing code is already attempting to already handle this for
some individual extensions, but it is doing so inconsistently. Duplicate
efforts in individual extension parsing will be cleaned up in a follow-up.
Reviewed-by: Stephen Henson <steve@openssl.org>
In the early stages of creating the new test framework,
00-test_checkexes was a temporary check to ensure we had a recipe for
every test program in test/. By now, this test has fulfilled its
purpose, and we've learned how to make recipes properly. It's time
for this check to go away.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If the environment variable HARNESS_ACTIVE isn't defined or
HARNESS_VERBOSE is defined, it's probable that lots of output is
desired.
Reviewed-by: Rich Salz <rsalz@openssl.org>
To enable heartbeats for DTLS, configure with enable-heartbeats.
Heartbeats for TLS have been completely removed.
This addresses RT 3647
Reviewed-by: Richard Levitte <levitte@openssl.org>
To be able to run tests when we've built in a directory other than
the source tree, the testing framework needs a few adjustments.
test/testlib/OpenSSL/Test.pm needs to know where it can find
shlib_wrap.sh, and a number of other tests need to be told a different
place to find engines than what they may be able to figure out on
their own. Relying to $TOP is not enough, $SRCTOP and $BLDTOP can be
used as an alternative.
As part of this change, top_file and top_dir are removed and
srctop_file, bldtop_file, srctop_dir and bldtop_dir take their place.
Reviewed-by: Ben Laurie <ben@openssl.org>
Adds a set of tests for the newly rewritten DTLSv1_listen function.
The test pokes various packets at the function and then checks
the return value and the data written out to ensure it is what we
would have expected.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This uilds on the same way of checking for availability as we do in
TLSProxy. We use all IP factories we know of, starting with those who
know both IPv6 and IPv4 and ending with the one that only knows IPv4
and cache their possible success as foundation for checking the
available of each IP domain.
80-test_ssl.t has bigger chances of working on platforms that do not
run both IP domains.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The test program clienthello checks TLS extensions, so there's no
point running it when no TLS protocol is available.
Reviewed-by: Ben Laurie <ben@openssl.org>
This makes use of TLSProxy, which was expanded to use IO::Socket::IP
(which is a core perl module) or IO::Socket::INET6 (which is said to
be more popular) instead IO::Socket::INET if one of them is installed.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This adds a couple of simple tests to see that SSL traffic using the
reimplemented BIO_s_accept() and BIO_s_connect() works as expected,
both on IPv4 and on IPv6.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
When auxiliary data contains only reject entries, continue to trust
self-signed objects just as when no auxiliary data is present.
This makes it possible to reject specific uses without changing
what's accepted (and thus overring the underlying EKU).
Added new supported certs and doubled test count from 38 to 76.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).
Added tests and updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
top_dir() are used to create directory names, top_file() should be
used for files. In a Unixly environment, that doesn't matter, but...
Reviewed-by: Rich Salz <rsalz@openssl.org>
It seems that Test::More doesn't like 0 tests, a line like this raises
an error and stops the recipe entirely:
plan tests => 0;
So we need to check for 0 tests beforehand and skip the subtest
explicitely in that case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Missing SKIP: block in SSL unit tests for DTLS and TLS version tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
It is sometimes useful (especially in automated tests) to supply
multiple trusted or untrusted certificates via separate files rather
than have to prepare a single file containing them all.
To that end, change verify(1) to accept these options zero or more
times. Also automatically set -no-CAfile and -no-CApath when
-trusted is specified.
Improve verify(1) documentation, which could still use some work.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.
See:
https://wiki.openssl.org/index.php/Binaries
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
On some platforms, the shell will determine what attributes a file
will have, so while the program might think it's safely outputting
binary data, it's not always true.
For the sake of the tests, it's therefore safer to use -out than to
use redirection.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This used to work but somewhere along the line it broke and was failing to
detect duplicate ordinals - which was the whole point of the test!
Reviewed-by: Rich Salz <rsalz@openssl.org>
VMS being a record oriented operating system, it's uncertain how the
'pipe' passes binary data from one process to another. Experience
shows that we get in trouble, and it's probably due to the pipe in
itself being opened in text mode (variable length records).
It's safer to pass data via an intermediary file instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
VMS uses a variant of openssl.cnf named openssl-vms.cnf.
There's a Perl on VMS mystery where a open pipe will not SIGPIPE when
the child process exits, which means that a loop sending "y\n" to it
will never stop. Adding a counter helps fix this (set to 10, we know
that none of the CA.pl commands will require more).
Reviewed-by: Rich Salz <rsalz@openssl.org>
Since danetest is to test DANE rather than specific algorithms, it's
acceptable to require EC when testing it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the client sends a status_request extension in the ClientHello
and the server responds with a status_request extension in the
ServerHello then normally the server will also later send a
CertificateStatus message. However this message is *optional* even
if the extensions were sent. This adds a test to ensure that if
the extensions are sent then we can still omit the message.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
On Linux when creating the .so file we were exporting all symbols. We should
only be exporting public symbols. This commit fixes the issue. It is only
applicable to linux currently although the same technique may work for other
platforms (e.g. Solaris should work the same way).
This also adds symbol version information to our exported symbols.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Occaisionally we have had problems where there are duplicated ordinals in
libeay.num or ssleay.num. This adds a test for this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The windows test uses the pseudo file "nul" to indicate no file for the
-CApath option. This does not work on all versions of Windows. Instead use
the new -no-CApath option.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The openssl rehash command is not available on some platforms including
Windows. This change skips the associated tests if rehash is not available.
Reviewed-by: Richard Levitte <levitte@openssl.org>
It depended on 'openssl no-wp', which always exited with code 0, so
this test would never be performed, and this, I never discovered that
the program it's supposed to run was misspellt. Furthermore, the
feature to check is 'whirlpool', not 'wp'.
All corrected.
Reviewed-by: Stephen Henson <steve@openssl.org>
Obvious typo, and it took configuring with 'zlib' to discover it,
otherwise there was a previous skip that bypassed this section
entirely.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If test/recipes/40-test_rehash.t is executed as root, the last test
will fail, since the created directory will remain writable no matter
what. Make sure it complains loudly about being run as root.
Reviewed-by: Rich Salz <rsalz@openssl.org>
test_ecdh and test_ecdsa are made to depend on no-ec being false.
test_hmac is made not to depend on algorithm at all.
Based on a contribution by Alessandro Ghedini <alessandro@ghedini.me>
Reviewed-by: Rich Salz <rsalz@openssl.org>
The verify_extra_test was recently changed to take its parameters as
arguments instead of having them hardcoded.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This recipe counted too much on being called with test/ as its current
working directory. That's a mistake on, for example, Windows.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The testsslproxy tests turned out to be useless as they were. They
were really just for show and the results were ignore. Now they are
changed into a more veerifiable test
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some tests were copied from test_jpake, but the title wasn't changed
accordingly. This might seem like a small thing, but it does affect
the log file name...
Reviewed-by: Rich Salz <rsalz@openssl.org>
MINFO may be an old file lying around, which might have
00-check_testexes.t produce incorrect results. To make sure this
doesn't happen, check the variable VERSION in it against the same
variable in the top Makefile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Before trying to read MINFO, we have no idea how many to test for, and
because skip expects to get an exact number somehow, it's better to
use 'plan skip_all'.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Following the commit from July 2 that removed netscape formated certs,
it is no longer necessary to have conversion tests for it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Unfortunately, a file spec with character range globs interfere with
paths on VMS, and are therefore disabled. Rework this test to collect
a list of expected tests and a list of all recipes and compare the two
using grep.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It became tedious as well as error prone to have all recipes use
Test::More as well as OpenSSL::Test. The easier way is to make
OpenSSL::Test an extension of Test::More, thereby having all version
checks as well as future checks firmly there. Additionally, that
allows us to extend existing Test::More functions if the need would
arise.
Reviewed-by: Rich Salz <rsalz@openssl.org>
00-check_testexes.t was a way for me to check that I didn't forget a
compiled test app. The way it worked was to require MINFO to be present.
Considering the need for this test has diminished considerably at this
point, I might as well tone down the requirement, and have it skip the
test (and not fail it) if MINFO isn't present.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Very simple test recipes easily become tedious, so they might benefit
from being made as simple as possible. Therefore, OpenSSL::Test::Simple
is born. It currently provides but one function, simple_test(), which
takes a minimum of two parameters (test name and program to run), with
the optional third, being the algorithm to be checked for before
running the test itself.
All recipes with that simple thing to do have been rewritten to be as
minimal as possible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also remove recipes/00-check_testalltests.t, since it will lack the
information from the now gone alltests target.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Note that this required a change in constant_time_test.c, as it says
"ok", which interferes with what Test::Harness expects to see. I had
constant_time_test.c say "success" instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
As tests are done until now, there are a few scripts that look almost,
but not quite the same. tkey, tx509, tcrl, tpkcs7, treq, tsid and
probably a few more.
recipes/tconversions.pl is a helper script that generalises the
function of each of those, and can then be used in a general manner
from test recipes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The math recipes are among the heavier, but also quite important.
For the BN test, we have previously relied on bc to verify the numbers.
Unfortunately, bc doesn't exist everywhere, making tests on some platforms
rather painful. With the new recipe (recipes/10-test_bn.t), we rely
on perl's Math::BigInt and a homegrown simple calculator (recipes/bc.pl)
that can do enough to cover for bc.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The idea with this perl based testing framework is to make use of
what's delivered with perl and exists on all sorts of platforms.
The choice came to using Test::More and Test::Harness, as that seems
to be the most widely spread foundation, even if perl is aged.
The main runner of the show is run_tests.pl. As it currently stands,
it's designed to run from inside Makefile, but it's absolutely
possible to run it from the command line as well, like so:
cd test
OPENSSL_SRCDIR=.. perl run_tests.pl
The tester scripts themselves are stored in the subdirectory recipes/,
and initially, we have two such scripts, recipes/00-check_testalltests.t
and recipes/00-check_testexes.t. recipes/00-check_testalltests.t will
pick out the dependencies of "alltests" in test/Makefile, and check if
it can find recipes with corresponding names. recipes/00-check_testexes.t
does something similar, but bases it on existing compiled test binaries.
They make it easy to figure out what's to be added, and will be
removed when this effort is finished.
Individual recipes can be run as well, of course, as they are perl
scripts in themselves. For example, you can run only
recipes/00-check_testexes.t like so:
cd test
OPENSSL_SRCDIR=.. perl recipes/00-check_testexes.t
To make coding easier, there's a routine library OpenSSL::Test, which
is reachable in a perl script like so:
use lib 'testlib';
use OpenSSL::Test;
Reviewed-by: Rich Salz <rsalz@openssl.org>
