Rather than using init_buf we use the record layer read and write buffers
in DTLSv1_listen(). These seem more appropriate anyway and will help with
the next commit.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7375)
The formula used for this is now
kVarianceBlocks = ((255 + 1 + md_size + md_block_size - 1) / md_block_size) + 1
Notice that md_block_size=64 for SHA256, which results on the
magic constant kVarianceBlocks = 6.
However, md_block_size=128 for SHA384 leading to kVarianceBlocks = 4.
CLA:trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7342)
I was never exported in our shared libraries and no one noticed, and
we don't seem to use it ourselves, so clean it away.
In all likelyhood, this is a remain from the 90's, when it was in
fashion to litter library modules with these kinds of strings.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7340)
If using an old style TLSv1.2 PSK callback then the maximum possible PSK
len is PSK_MAX_PSK_LEN (256) - not 64.
Fixes#7261
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7267)
Historically SSL_CTX_set_ssl_version() has reset the cipher list
to the default. Splitting TLS 1.3 ciphers to be tracked separately
caused a behavior change, in that TLS 1.3 cipher configuration was
preserved across calls to SSL_CTX_set_ssl_version(). To restore commensurate
behavior with the historical behavior, set the ciphersuites to the default as
well as setting the cipher list to the default.
Closes: #7226
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7270)
PR #3783 introduce coded to reset the server side SNI state in
SSL_do_handshake() to ensure any erroneous config time SNI changes are
cleared. Unfortunately SSL_do_handshake() can be called mid-handshake
multiple times so this is the wrong place to do this and can mean that
any SNI data is cleared later on in the handshake too.
Therefore move the code to a more appropriate place.
Fixes#7014
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7149)
Ideally, SSL_get_servername() would do exactly as it is documented
and return exactly what the client sent (i.e., what we currently
are stashing in the SSL's ext.hostname), without needing to refer
to an SSL_SESSION object. For historical reasons, including the
parsed SNI value from the ClientHello originally being stored in the
SSL_SESSION's ext.hostname field, we have had references to the
SSL_SESSION in this function. We cannot fully excise them due to
the interaction between user-supplied callbacks and TLS 1.2 resumption
flows, where we call all callbacks but the client did not supply an
SNI value. Existing callbacks expect to receive a valid SNI value
in this case, so we must fake one up from the resumed session in
order to avoid breakage.
Otherwise, greatly simplify the implementation and just return the
value in the SSL, as sent by the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)
Commit 1c4aa31d79 modified the state machine
to clean up stale ext.hostname values from SSL objects in the case when
SNI was not negotiated for the current handshake. This is natural from
the TLS perspective, since this information is an extension that the client
offered but we ignored, and since we ignored it we do not need to keep it
around for anything else.
However, as documented in https://github.com/openssl/openssl/issues/7014 ,
there appear to be some deployed code that relies on retrieving such an
ignored SNI value from the client, after the handshake has completed.
Because the 1.1.1 release is on a stable branch and should preserve the
published ABI, restore the historical behavior by retaining the ext.hostname
value sent by the client, in the SSL structure, for subsequent retrieval.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7115)
The is_tls13_capable() function should not return 0 if no certificates
are configured directly because a certificate callback is present.
Fixes#7140
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7141)
If we've sent a close_notify then we are restricted about what we can do
in response to handshake messages that we receive. However we can sensibly
process NewSessionTicket messages. We can also process a KeyUpdate message
as long as we also ignore any request for us to update our sending keys.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7114)
If we have selected a ciphersuite using RSA key exchange then we must
not attempt to use an RSA-PSS cert for that.
Fixes#7059
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7099)
Treat a connection using an external PSK like we would a resumption and
send a single NewSessionTicket afterwards.
Fixes#6941
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7097)
If a client sends data to a server and then immediately closes without
waiting to read the NewSessionTickets then the server can receive EPIPE
when trying to write the tickets and never gets the opportunity to read
the data that was sent. Therefore we ignore EPIPE when writing out the
tickets in TLSv1.3
Fixes#6904
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6944)
They add a single item, so the names give a false impression of what
they do, making them hard to remember. Better to give them a somewhat
better name.
Fixes#6930
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6931)
Fixes#6994
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7009)
We need to ensure that the min-max version range we use when constructing
the ClientHello is the same range we use when we validate the version
selected by the ServerHello. Otherwise this may appear as a fallback or
downgrade.
Fixes#6964
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7013)
The TLS-1.3 ciphersuites must not be blocked by @SECLEVEL=3 even
though they are not explicitly marked as using DH/ECDH.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6959)
We already have SSL_set_post_handshake_auth(). This just adds the SSL_CTX
equivalent.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
Having post handshake auth automatically switched on breaks some
applications written for TLSv1.2. This changes things so that an explicit
function call is required for a client to indicate support for
post-handshake auth.
Fixes#6933.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6938)
A client that has fallen back could detect an inappropriate fallback if
the TLSv1.3 downgrade protection sentinels are present.
Fixes#6756
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6894)
At certain points in the handshake we could receive either a plaintext or
an encrypted alert from the client. We should tolerate both where
appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
If we sent early_data and then received back an HRR, the enc_write_ctx
was stale resulting in errors if an alert needed to be sent.
Thanks to Quarkslab for reporting this.
In any case it makes little sense to encrypt alerts using the
client_early_traffic_secret, so we add special handling for alerts sent
after early_data. All such alerts are sent in plaintext.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6887)
Under certain error conditions a call to SSLfatal could accidently be
missed.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6872)
In some cases it's about redundant check for return value, in some
cases it's about replacing check for -1 with comparison to 0.
Otherwise compiler might generate redundant check for <-1. [Even
formatting and readability fixes.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
In some scenarios the connection could fail without an alert being sent.
This causes a later assertion failure.
Thanks to Quarkslab for reporting this.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6852)
Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).
Ensure that proper reason codes are given for the new TLSv1.3 alerts.
Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.
Fixes#6804
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)
Commit 1c4aa31d79 changed how we process
and store SNI information during the handshake, so that a hostname is
only saved in the SSL_SESSION structure if that SNI value has actually
been negotiated. SSL_get_servername() was adjusted to match, with a new
conditional being added to handle the case when the handshake processing
is ongoing, and a different location should be consulted for the offered
SNI value. This was done in an attempt to preserve the historical
behavior of SSL_get_servername(), a function whose behavior only mostly
matches its documentation, and whose documentation is both lacking and
does not necessarily reflect the actual desired behavior for such an
API. Unfortunately, sweeping changes that would bring more sanity to
this space are not possible until OpenSSL 1.2.0, for ABI compatibility
reasons, so we must attempt to maintain the existing behavior to the
extent possible.
The above-mentioned commit did not take into account the behavior
of SSL_get_servername() during resumption handshakes for TLS 1.2 and
prior, where no SNI negotiation is performed. In that case we would
not properly parse the incoming SNI and erroneously return NULL as
the servername, when instead the logical session is associated with
the SNI value cached in the SSL_SESSION. (Note that in some cases an
SNI callback may not need to do anything in a TLS 1.2 or prior resumption
flow, but we are calling the callbacks and did not provide any guidance
that they should no-op if the connection is being resumed, so we must
handle this case in a usable fashion.) Update our behavior accordingly to
return the session's cached value during the handshake, when resuming.
This fixes the boringssl tests.
[extended tests]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6792)
The API used to set what SNI value to send in the ClientHello
can also be used on server SSL objects, with undocumented and
un-useful behavior. Unfortunately, when generic SSL_METHODs
are used, s->server is still set, prior to the start of the
handshake, so we cannot prevent this nonsensical usage at the
present time. Leave a note to revisit this when ABI-breaking
changes are permitted.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
In particular, adhere to the rule that we must not modify any
property of an SSL_SESSION object once it is (or might be) in
a session cache. Such modifications are thread-unsafe and have
been observed to cause crashes at runtime.
To effect this change, standardize on the property that
SSL_SESSION->ext.hostname is set only when that SNI value
has been negotiated by both parties for use with that session.
For session resumption this is trivially the case, so only new
handshakes are affected.
On the client, the new semantics are that the SSL->ext.hostname is
for storing the value configured by the caller, and this value is
used when constructing the ClientHello. On the server, SSL->ext.hostname
is used to hold the value received from the client. Only if the
SNI negotiation is successful will the hostname be stored into the
session object; the server can do this after it sends the ServerHello,
and the client after it has received and processed the ServerHello.
This obviates the need to remove the hostname from the session object
in case of failed negotiation (a change that was introduced in commit
9fb6cb810b in order to allow TLS 1.3
early data when SNI was present in the ClientHello but not the session
being resumed), which was modifying cached sessions in certain cases.
(In TLS 1.3 we always produce a new SSL_SESSION object for new
connections, even in the case of resumption, so no TLS 1.3 handshakes
were affected.)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
Using the rsa_pss_rsae_sha256 sig alg should imply that the key OID is
rsaEncryption. Similarly rsa_pss_pss_sha256 implies the key OID is
rsassaPss. However we did not check this and incorrectly tolerated a key
OID that did not match the sig alg sent by the peer.
Fixes#6611
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)
