If multiple TLS extensions are expected but not received, the TLS extension and supplemental data 'generate' callbacks are the only chance for the receive-side to trigger a specific TLS alert during the handshake.
Removed logic which no-op'd TLS extension generate callbacks (as the generate callbacks need to always be called in order to trigger alerts), and updated the serverinfo-specific custom TLS extension callbacks to track which custom TLS extensions were received by the client, where no-ops for 'generate' callbacks are appropriate.
New ctrl sets current certificate based on certain criteria. Currently
two options: set the first valid certificate as current and set the
next valid certificate as current. Using these an application can
iterate over all certificates in an SSL_CTX or SSL structure.
DHE is the standard term used by the RFCs and by other TLS
implementations. It's useful to have the internal variables use the
standard terminology.
This patch leaves a synonym SSL_kEDH in place, though, so that older
code can still be built against it, since that has been the
traditional API. SSL_kEDH should probably be deprecated at some
point, though.
ECDHE is the standard term used by the RFCs and by other TLS
implementations. It's useful to have the internal variables use the
standard terminology.
This patch leaves a synonym SSL_kEECDH in place, though, so that older
code can still be built against it, since that has been the
traditional API. SSL_kEECDH should probably be deprecated at some
point, though.
PR#3169
This patch, which currently applies successfully against master and
1_0_2, adds the following functions:
SSL_[CTX_]select_current_cert() - set the current certificate without
disturbing the existing structure.
SSL_[CTX_]get0_chain_certs() - get the current certificate's chain.
SSL_[CTX_]clear_chain_certs() - clear the current certificate's chain.
The patch also adds these functions to, and fixes some existing errors
in, SSL_CTX_add1_chain_cert.pod.
Instead, send random bytes, unless SSL_SEND_{CLIENT,SERVER}RANDOM_MODE
is set.
This is a forward-port of commits:
4af793036ff4c93b46ed3da721dac92583270191
While the gmt_unix_time record was added in an ostensible attempt to
mitigate the dangers of a bad RNG, its presence leaks the host's view
of the current time in the clear. This minor leak can help
fingerprint TLS instances across networks and protocols... and what's
worse, it's doubtful thet the gmt_unix_time record does any good at
all for its intended purpose, since:
* It's quite possible to open two TLS connections in one second.
* If the PRNG output is prone to repeat itself, ephemeral
handshakes (and who knows what else besides) are broken.
Experimental support for encrypt then mac from
draft-gutmann-tls-encrypt-then-mac-02.txt
To enable it set the appropriate extension number (0x10 for the test server)
using e.g. -DTLSEXT_TYPE_encrypt_then_mac=0x10
For non-compliant peers (i.e. just about everything) this should have no
effect.
Removed prior audit proof logic - audit proof support was implemented using the generic TLS extension API
Tests exercising the new supplemental data registration and callback api can be found in ssltest.c.
Implemented changes to s_server and s_client to exercise supplemental data callbacks via the -auth argument, as well as additional flags to exercise supplemental data being sent only during renegotiation.
Check for Suite B support using method flags instead of version numbers:
anything supporting TLS 1.2 cipher suites will also support Suite B.
Return an error if an attempt to use DTLS 1.0 is made in Suite B mode.
Since s->method does not reflect the final client version when a client
hello is sent for SSLv23_client_method it can't be relied on to indicate
if TLS 1.2 ciphers should be used. So use the client version instead.
Add correct flags for DTLS 1.2, update s_server and s_client to handle
DTLS 1.2 methods.
Currently no support for version negotiation: i.e. if client/server selects
DTLS 1.2 it is that or nothing.
Use the enc_flags field to determine whether we should use explicit IV,
signature algorithms or SHA256 default PRF instead of hard coding which
versions support each requirement.
Revise DTLS code. There was a *lot* of code duplication in the
DTLS code that generates records. This makes it harder to maintain and
sometimes a TLS update is omitted by accident from the DTLS code.
Specifically almost all of the record generation functions have code like
this:
some_pointer = buffer + HANDSHAKE_HEADER_LENGTH;
... Record creation stuff ...
set_handshake_header(ssl, SSL_MT_SOMETHING, message_len);
...
write_handshake_message(ssl);
Where the "Record creation stuff" is identical between SSL/TLS and DTLS or
in some cases has very minor differences.
By adding a few fields to SSL3_ENC to include the header length, some flags
and function pointers for handshake header setting and handshake writing the
code can cope with both cases.
Note: although this passes "make test" and some simple DTLS tests there may
be some minor differences in the DTLS code that have to be accounted for.
Add DTLS record header parsing, different client hello format and add
HelloVerifyRequest message type.
Add code to d1_pkt.c to send message headers to the message callback.
Kludge alert. This is arranged by passing padding length in unused
bits of SSL3_RECORD->type, so that orig_len can be reconstructed.
(cherry picked from commit 8bfd4c659f)
We have to use EVP in FIPS mode so we can only partially mitigate
timing differences.
Make an extra call to EVP_DigestSignUpdate to hash additonal blocks
to cover any timing differences caused by removal of padding.
(cherry picked from commit b908e88ec1)
This patch makes the decoding of SSLv3 and TLS CBC records constant
time. Without this, a timing side-channel can be used to build a padding
oracle and mount Vaudenay's attack.
This patch also disables the stitched AESNI+SHA mode pending a similar
fix to that code.
In order to be easy to backport, this change is implemented in ssl/,
rather than as a generic AEAD mode. In the future this should be changed
around so that HMAC isn't in ssl/, but crypto/ as FIPS expects.
(cherry picked from commit e130841bcc)
client hello message. Previously this could only be retrieved on an initial
connection and it was impossible to determine the cipher IDs of any uknown
ciphersuites.
by a certificate chain. Add additional tests to handle client
certificates: checks for matching certificate type and issuer name
comparison.
Print out results of checks for each candidate chain tested in
s_server/s_client.
possible to have different stores per SSL structure or one store in
the parent SSL_CTX. Include distint stores for certificate chain
verification and chain building. New ctrl SSL_CTRL_BUILD_CERT_CHAIN
to build and store a certificate chain in CERT structure: returing
an error if the chain cannot be built: this will allow applications
to test if a chain is correctly configured.
Note: if the CERT based stores are not set then the parent SSL_CTX
store is used to retain compatibility with existing behaviour.
details in s_client.
Also add ctrl to set client certificate types. If not used sensible values
will be included based on supported signature algorithms: for example if
we don't include any DSA signing algorithms the DSA certificate type is
omitted.
Fix restriction in old code where certificate types would be truncated
if it exceeded TLS_CT_NUMBER.
the permitted signature algorithms for server and client authentication
are the same but it is now possible to set different algorithms for client
authentication only.
is required by client or server. An application can decide which
certificate chain to present based on arbitrary criteria: for example
supported signature algorithms. Add very simple example to s_server.
This fixes many of the problems and restrictions of the existing client
certificate callback: for example you can now clear existing certificates
and specify the whole chain.
the certificate can be used for (if anything). Set valid_flags field
in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
to have similar checks in it.
Add new "cert_flags" field to CERT structure and include a "strict mode".
This enforces some TLS certificate requirements (such as only permitting
certificate signature algorithms contained in the supported algorithms
extension) which some implementations ignore: this option should be used
with caution as it could cause interoperability issues.
Only store encoded versions of peer and configured signature algorithms.
Determine shared signature algorithms and cache the result along with NID
equivalents of each algorithm.
TLS v1.2. These are sent as an extension for clients and during a certificate
request for servers.
TODO: add support for shared signature algorithms, respect shared algorithms
when deciding which ciphersuites and certificates to permit.
enabled instead of requiring an application to hard code a (possibly
inappropriate) parameter set and delve into EC internals we just
automatically use the preferred curve.
Tidy some code up.
Don't allocate a structure to handle ECC extensions when it is used for
default values.
Make supported curves configurable.
Add ctrls to retrieve shared curves: not fully integrated with rest of
ECC code yet.
structure.
Before this the only way to add a custom chain was in the parent SSL_CTX
(which is shared by all key types and SSL structures) or rely on auto
chain building (which is performed on each handshake) from the trust store.
certificate chain instead of an X509 structure.
This makes it easier to enhance code in future and the chain
output functions have access to the CERT_PKEY structure being
used.
New function ssl_add_cert_chain which adds a certificate chain to
SSL internal BUF_MEM. Use this function in ssl3_output_cert_chain
and dtls1_output_cert_chain instead of partly duplicating code.
The cipher definitions of these ciphersuites have been around since SSLeay
but were always disabled. Now OpenSSL supports DH certificates they can be
finally enabled.
Various additional changes were needed to make them work properly: many
unused fixed DH sections of code were untested.
algorithms extension (including everything we support). Swicth to new
signature format where needed and relax ECC restrictions.
Not TLS v1.2 client certifcate support yet but client will handle case
where a certificate is requested and we don't have one.
signature algorithms extension and correct signature format for
server key exchange.
All ciphersuites should now work on the server but no client support and
no client certificate support yet.
checking added, SHA256 PRF support added.
At present only RSA key exchange ciphersuites work with TLS v1.2 as the
new signature format is not yet implemented.
Some #include statements were not properly protected. This will go unnoted
on most systems as openssl/comp.h tends to be installed as a system header
file by default but may become visible when cross compiling.
with the appropriate parameters which calls OBJ_bsearch(). A compiler will
typically inline this.
This avoids the need for cmp_xxx variables and fixes unchecked const issues
with CHECKED_PTR_OF()
Also, get rid of compile-time switch OPENSSL_NO_RELEASE_BUFFERS
because it was rather pointless (the new behavior has to be explicitly
requested by setting SSL_MODE_RELEASE_BUFFERS anyway).
(draft-rescorla-tls-opaque-prf-input-00.txt), and do some cleanups and
bugfixes on the way. In particular, this fixes the buffer bounds
checks in ssl_add_clienthello_tlsext() and in ssl_add_serverhello_tlsext().
Note that the opaque PRF Input TLS extension is not compiled by default;
see CHANGES.
This change resolves a number of problems and obviates multiple kludges.
A new feature is that you can now say "AES256" or "AES128" (not just
"AES", which enables both).
In some cases the ciphersuite list generated from a given string is
affected by this change. I hope this is just in those cases where the
previous behaviour did not make sense.
1. "unsigned long long" isn't portable changed: to BN_ULLONG.
2. The LL prefix isn't allowed in VC++ but it isn't needed where it is used.
2. Avoid lots of compiler warnings about signed/unsigned mismatches.
3. Include new library directory pqueue in mk1mf build system.
4. Update symbols.
functions and macros.
This change has associated tags: LEVITTE_before_const and
LEVITTE_after_const. Those will be removed when this change has been
properly reviewed.
New macros SSL[_CTX]_set_msg_callback_arg().
Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet).
New '-msg' option for 'openssl s_client' and 'openssl s_server'
that enable a message callback that displays all protocol messages.
In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if
client_version is smaller than the protocol version in use.
Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0
if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the
client will at least see that alert.
Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic
pointer).
Add/update some OpenSSL copyright notices.
and make all files the depend on it include it without prefixing it
with openssl/.
This means that all Makefiles will have $(TOP) as one of the include
directories.
objects) or OPENSSL_BUILD_SHLIBSSL (for files that end up as libssl
objects) is defined, redefine OPENSSL_EXTERN to be OPENSSL_EXPORT.
This is actually only important on Win32, and can safely be ignored in
all other cases, at least for now.
yet tighter, and also put some heat on the rest of the library by
insisting (correctly) that compare callbacks used in stacks are prototyped
with "const" parameters. This has led to a depth-first explosion of
compiler warnings in the code where 1 constification has led to 3 or 4
more. Fortunately these have all been resolved to completion and the code
seems cleaner as a result - in particular many of the _cmp() functions
should have been prototyped with "const"s, and now are. There was one
little problem however;
X509_cmp() should by rights compare "const X509 *" pointers, and it is now
declared as such. However, it's internal workings can involve
recalculating hash values and extensions if they have not already been
setup. Someone with a more intricate understanding of the flow control of
X509 might be able to tighten this up, but for now - this seemed the
obvious place to stop the "depth-first" constification of the code by
using an evil cast (they have migrated all the way here from safestack.h).
Fortunately, this is the only place in the code where this was required
to complete these type-safety changes, and it's reasonably clear and
commented, and seemed the least unacceptable of the options. Trying to
take the constification further ends up exploding out considerably, and
indeed leads directly into generalised ASN functions which are not likely
to cooperate well with this.
designed for that. This removes the potential error to mix data and
function pointers.
Please note that I'm a little unsure how incorrect calls to the old
ctrl functions should be handled, in som cases. I currently return 0
and that's it, but it may be more correct to generate a genuine error
in those cases.
in cryptlib.h (which is often included as "../cryptlib.h"), then the
question remains relative to which directory this is to be interpreted.
gcc went one further directory up, as intended; but makedepend thinks
differently, and so probably do some C compilers. So the ../ must go away;
thus e_os.h goes back into include/openssl (but I now use
#include "openssl/e_os.h" instead of <openssl/e_os.h> to make the point) --
and we have another huge bunch of dependency changes. Argh.
While modifying the sources, I found some inconsistencies on the use of
s->cert vs. s->session->sess_cert; I don't know if those could
really have caused problems, but possibly this is a proper bug-fix
and not just a clean-up.
private keys and/or callback functions which directly correspond to their
SSL_CTX_xxx() counterparts but work on a per-connection basis. This is needed
for applications which have to configure certificates on a per-connection
basis (e.g. Apache+mod_ssl) instead of a per-context basis (e.g.
s_server).
For the RSA certificate situation is makes no difference, but for the DSA
certificate situation this fixes the "no shared cipher" problem where the
OpenSSL cipher selection procedure failed because the temporary keys were not
overtaken from the context and the API provided no way to reconfigure them.
The new functions now let applications reconfigure the stuff and they are in
detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
non-public-API function ssl_cert_instantiate() is used as a helper function
and also to reduce code redundancy inside ssl_rsa.c.
Submitted by: Ralf S. Engelschall
Reviewed by: Ben Laurie
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
Fix so that the version number in the master secret, when passed
via RSA, checks that if TLS was proposed, but we roll back to SSLv3
(because the server will not accept higher), that the version number
is 0x03,0x01, not 0x03,0x00
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
Submitted by:
Reviewed by:
PR:
