The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
The original intent of SSL_PKEY_RSA_SIGN and SSL_PKEY_RSA_ENC was to
support two different keys for RSA signing and decrypt. However this
was never implemented and we only ever set one key and the other was
always NULL. Replace with single SSL_PKEY_RSA type.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2587)
In TLSv1.2 an individual sig alg is represented by 1 byte for the hash
and 1 byte for the signature. In TLSv1.3 each sig alg is represented by
two bytes, where the two bytes together represent a single hash and
signature combination. This converts the internal representation of sigalgs
to use a single int for the pair, rather than a pair of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The SSL_load_client_CA_file() failed to load any CAs due to an
inccorrect assumption about the return value of lh_*_insert(). The
return value when inserting into a hash is the old value of the key.
The bug was introduced in 3c82e437bb.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1279)
When setting the certificate chain, if a certificate doesn't pass
security checks, then chain may point to a freed STACK_OF(X509)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The i2d_X509() function can return a negative value on error. Therefore
we should make sure we check it.
Issue reported by Yuan Jochen Kang.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level. For verification of SSL peers, this
is automatically set from the SSL security level. Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.
The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.
New verify(1) tests added to check enforcement of chain signature
and public key security levels. Also added new tests of enforcement
of the verify_depth limit.
Updated documentation.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Commit 7823d792d0 added DEFINE_LHASH_OF
to a C source file. DEFINE_LHASH_OF() and DEFINE_STACK_OF() must
be used only in header files to avoid clang warnings for unused
static-inline functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
A call to X509_verify_cert() is used to build a chain of certs for the
server to send back to the client. It isn't *actually* used for verifying
the cert at all - just building the chain. Therefore the return value is
ignored.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The SSL structure contained a "type" variable that was set to either
SSL_ST_ACCEPT or SSL_ST_CONNECT depending on whether we are the server or
the client. This duplicates the capability of the "server" variable and was
actually rarely used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
For server use a PSK identity hint value in the CERT structure which
is inherited when SSL_new is called and which allows applications to
set hints on a per-SSL basis. The previous version of
SSL_use_psk_identity_hint tried (wrongly) to use the SSL_SESSION structure.
PR#4039
Reviewed-by: Matt Caswell <matt@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
