Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The Engine API lost the setting of memory management hooks in
bind_engine. Here's putting that back.
EX_DATA and ERR functions need the same treatment.
Reviewed-by: Matt Caswell <matt@openssl.org>
The engine DSOs were named as if they were shared libraries, and could
end up having all sorts of fancy names:
Cygwin: cygFOO.dll
Mingw: FOOeay32.dll
Unix: libFOO.so / libFOO.sl / libFOO.dylib / ...
This may be confusing, since they look like libraries one should link
with at link time, when they're just DSOs.
It's therefore time to rename them, and do it consistently on all
platforms:
Cygwin & Mingw: FOO.dll
Unix: FOO.{so,sl,dylib,...}
Interestingly enough, the MSVC and VMS builds always did it this way.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Only two macros CRYPTO_MDEBUG and CRYPTO_MDEBUG_ABORT to control this.
If CRYPTO_MDEBUG is not set, #ifdef out the whole debug machinery.
(Thanks to Jakob Bohm for the suggestion!)
Make the "change wrapper functions" be the only paradigm.
Wrote documentation!
Format the 'set func' functions so their paramlists are legible.
Format some multi-line comments.
Remove ability to get/set the "memory debug" functions at runtme.
Remove MemCheck_* and CRYPTO_malloc_debug_init macros.
Add CRYPTO_mem_debug(int flag) function.
Add test/memleaktest.
Rename CRYPTO_malloc_init to OPENSSL_malloc_init; remove needless calls.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
Removed ability to set ex_data impl at runtime. This removed these
three functions:
const CRYPTO_EX_DATA_IMPL *CRYPTO_get_ex_data_implementation(void);
int CRYPTO_set_ex_data_implementation(const CRYPTO_EX_DATA_IMPL *i);
int CRYPTO_ex_data_new_class(void);
It is no longer possible to change the ex_data implementation at
runtime. (Luckily those functions were never documented :)
Also removed the ability to add new exdata "classes." We don't believe
this received much (if any) use, since you can't add it to OpenSSL objects,
and there are probably better (native) methods for developers to add
their own extensible data, if they really need that.
Replaced the internal hash table (of per-"class" stacks) with a simple
indexed array. Reserved an index for "app" application.
Each API used to take the lock twice; now it only locks once.
Use local stack storage for function pointers, rather than malloc,
if possible (i.e., number of ex_data items is under a dozen).
Make CRYPTO_EX_DATA_FUNCS opaque/internal.
Also fixes RT3710; index zero is reserved.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't check for NULL before calling free functions. This gets:
ERR_STATE_free
ENGINE_free
DSO_free
CMAC_CTX_free
COMP_CTX_free
CONF_free
NCONF_free NCONF_free_data _CONF_free_data
A sk_free use within OBJ_sigid_free
TS_TST_INFO_free (rest of TS_ API was okay)
Doc update for UI_free (all uses were fine)
X509V3_conf_free
X509V3_section_free
X509V3_string_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove ERR_[gs]et_implementation as they were not undocumented and
useless (the data structure was opaque).
Halve the number of lock/unlock calls in almost all ERR_
functions by letting the caller of get_hash or int_thread_set
able to lock. Very useful when looping, such as adding errors,
or when getting the hash and immediately doing a lookup on it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various build fixes, mostly uncovered by clang's unused-const-variable
and unused-function errors.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 0e1c318ece)
of libcrypto, then it is possible that when they are loaded they will share
the same static data as the loading application/library. This means it will
be too late to set memory/ERR/ex_data/[etc] callbacks, but entirely
unnecessary to try. This change puts a static variable in the core ENGINE
code (contained in libcrypto) and a function returning a pointer to it. If
the loaded ENGINE's return value from this function matches the loading
application/library's return value - they share static data. If they don't
match, the loaded ENGINE has its own copy of libcrypto's static data and so
the callbacks need to be set.
Also, although 0.9.7 hasn't been released yet, it's clear this will
introduce a binary incompatibility between dynamic ENGINEs built for 0.9.7
and 0.9.8 (though others probably exist already from EC_*** hooks and
what-not) - so the version control values are correspondingly bumped.
automatic load of dynamic engines. Add functionality to the dynamic
engine to handle engine directories and loading from those. This
is currently NOT compatible with the use of LD_LIBRARY_PATH and
similar environment variables.
Note: The changes in step 11 have all been made by Geoff Thorpe.
Credit where credit is due.
pointers passed to them whenever necessary. Otherwise it is possible the
caller may have overwritten (or deallocated) the original string data
when a later ENGINE operation tries to use the stored values.
Submitted by: Götz Babin-Ebell <babinebell@trustcenter.de>
Reviewed by: Geoff Thorpe
PR: 98
essentially overwrites itself with the new ENGINE, with the exception of
reference counts, ex_data structures, and other 'admin' elements. However
if the new ENGINE doesn't populate certain elements, there's the risk of
the "dynamic" ENGINE's elements showing through - the "cmd_defns" were just
one of the possibilities. This implements a more comprehensive cleanup.
empty set. This prevents engines that do not set the command
definitions themselves to inherit the ones from "dynamic", which would
otherwise be very confusing.
ENGINE_TABLE-based stuff - as described in crypto/engine/README.
Associated miscellaneous changes;
- the previous cipher/digest hooks that hardwired directly to EVP's
OBJ_NAME-based storage have been backed out. New cipher/digest support
has been constructed and will be committed shortly.
- each implementation defines its own ENGINE_load_<name> function now.
- the "openssl" ENGINE isn't needed or loaded any more.
- core (not algorithm or class specific) ENGINE code has been split into
multiple files to increase readability and decrease linker bloat.
- ENGINE_cpy() has been removed as it wasn't really a good idea in the
first place and now, because of registration issues, can't be
meaningfully defined any more.
- BN_MOD_EXP[_CRT] support is removed as per the README.
- a bug in enginetest.c has been fixed.
NB: This commit almost certainly breaks compilation until subsequent
changes are committed.
