Note that this commit constifies a user callback parameter and therefore
will break compilation for applications using this callback. But unless
they are abusing write access to the buffer, the fix is trivial.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Even though SOCKET is effectively declared as (void *) on Windows, it's
not actually a pointer, but an index within per-process table of
kernel objects. The table size is actually limited and its upper limit
is far below upper limit for signed 32-bit integer. This is what makes
cast in question possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
For those command line options that take the verification options
-CApath and -CAfile, if those options are absent then the default path or
file is used instead. It is not currently possible to specify *no* path or
file at all. This change adds the options -no-CApath and -no-CAfile to
specify that the default locations should not be used to all relevant
applications.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Use sockaddr_storage not sockaddr for the client IP address to allow for
IPv6.
Also fixed a section of code which was conditional on OPENSSL_NO_DTLS1
which should not have been.
Reviewed-by: Andy Polyakov <appro@openssl.org>
DTLSv1_listen is a commonly used function within DTLS solutions for
listening for new incoming connections. This commit adds support to s_server
for using it.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The -srpvfile option was broken in the srp command line app. Using it would
always result in "-dbfile and -configfile cannot be specified together."
The error message is also wrong because the option is "-srpvfile" not
"-dbfile", so that has been fixed too.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Have a look at the directories in crypto/, I found reason to add
checks on CMAC and HMAC. This might be completely irrelevant, but I
prefered covering too much than not enough.
Reviewed-by: Stephen Henson <steve@openssl.org>
A grep of OPENSSL_NO_ in the rest of the source tree revealed a few
more features to check.
NOTE: there are some of those macros that I ignore because a check of
them doesn't seem useful to external apps. This might change later on.
Reviewed-by: Stephen Henson <steve@openssl.org>
After a grep of OPENSSL_NO_ in apps/*.c, a few more features that may
be interesting to check the availability of came up.
Reviewed-by: Stephen Henson <steve@openssl.org>
New option "openssl list -disabled" this lists a set of disabled features
in a form which can be conveniently parsed by the test framework so it
knows which tests to skip.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the field separator isn't specified through -nameopt then use
XN_FLAG_SEP_CPLUS_SPC instead of printing nothing and returing an error.
PR#2397
Reviewed-by: Tim Hudson <tjh@openssl.org>
Both now warn once if directory isn't writeable.
Both now warn on file-write errors (multiple times).
Update manpage to describe both program and script correctly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
On Unix/Linux platforms, merge c_rehash script into openssl as a
C program.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
To set both the incoming and outgoing data when 'encrypting' or
'decrypting' to FORMAT_BASE64 wasn't quite the right thing to do.
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the output to stdout or the input from stdin is meant to be binary,
it's deeply unsetting to get the occasional LF converted to CRLF or
the other way around. If someone happens to forget to redirect stdin
or stdout, they will get gibberish anyway, line ending conversion will
not change that.
Therefore, let's not have dup_bio_* decide unilaterally what mode the
BIO derived from stdin and stdout, and rather let the app decide by
declaring the intended format.
Reviewed-by: Tim Hudson <tjh@openssl.org>
The different apps had the liberty to decide whether they would open their
input and output files in binary mode or not, which could be confusing if
two different apps were handling the same type of file in different ways.
The solution is to centralise the decision of low level file organisation,
and that the apps would use a selection of formats to state the intent of
the file.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of all, we needed to sort out which ones are binary and which
ones are text, and make sure they are treated accordingly and
consistently so
Reviewed-by: Tim Hudson <tjh@openssl.org>
Most of the accessors existed and were already used so it was easy.
TS_VERIFY_CTX didn't have accessors/settors so I added the simple and
obvious ones, and changed the app to use them. Also, within crypto/ts,
replaced the functions with direct access to the structure members
since we generally aren't opaque within a directory.
Also fix RT3901.
Reviewed-by: Tim Hudson <tjh@openssl.org>
In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
This does 64-bit division and multiplication, and on 32-bit platforms
pulls in libgcc symbols (and MSVC does similar) which may not be
available. Mostly done by David Woodhouse.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
clang suggests %llu instead, but it isn't clear that is portable on
all platforms.
C99 and above define a handy macro for us, so we try to use that
definition and fall back to current definition if needed (though we
switch to 'u' for unsigned).
Reviewed-by: Matt Caswell <matt@openssl.org>
Remove asn1-kludge option from the req utility. It was a decade old
workaround for CAs and software which required an invalid encoding
of PKCS#10 certificate requests: omitting the attributes field even
though it is not OPTIONAL.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was obsolete in 2001. This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: Matt Caswell <matt@openssl.org>
Add Host Header in OCSP query if no host header is set via -header
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Ben Laurie <ben@openssl.org>
The -use_srtp s_client/s_server option is supposed to take a colon
separated string as an argument. In master this was incorrectly set to
expect a filename.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Thanks folks:
348 Benjamin Kaduk
317 Christian Brueffer
254 Erik Tews
253 Erik Tews
219 Carl Mehner
155 (ghost)
95 mancha
51 DominikNeubauer
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There's no reason why we should default to a output format that is
old, and confusing in some cases.
This affects the commands "ca", "crl", "req" and "x509".
Reviewed-by: Rich Salz <rsalz@openssl.org>
When generating a private key, try to make the output file be readable
only by the owner. Put it in CHANGES file since it might be noticeable.
Add "int private" flag to apps that write private keys, and check that it's
set whenever we do write a private key. Checked via assert so that this
bug (security-related) gets fixed. Thanks to Viktor for help in tracing
the code-paths where private keys are written.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This is a workaround so old that nobody remembers what buggy clients
it was for. It's also been broken in stable branches for two years and
nobody noticed (see
https://boringssl-review.googlesource.com/#/c/1694/).
Reviewed-by: Tim Hudson <tjh@openssl.org>
For librypto to be complete, the stuff in both crypto/ and engines/
have to be built. Doing 'make test' or 'make apps' from a clean
source tree failed to do so.
Corrected by using the new 'build_libcrypto' in the top Makefile.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Here are the "rules" for handling flags that depend on #ifdef:
- Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd
entries appear at the end; by convention "engine" is last. This
ensures that at run-time, the flag will never be recognized/allowed.
The next two bullets entries are for silencing compiler warnings:
- In the while/switch parsing statement, use #ifdef for the body to
disable it; leave the "case OPT_xxx:" and "break" statements outside
the ifdef/ifndef. See ciphers.c for example.
- If there are multiple options controlled by a single guard, OPT_FOO,
OPT_BAR, etc., put a an #ifdef around the set, and then do "#else"
and a series of case labels and a break. See OPENSSL_NO_AES in cms.c
for example.
Reviewed-by: Matt Caswell <matt@openssl.org>
The module loading feature got broken a while ago, so restore it, but
have it a bit more explicit this time around.
Reviewed-by: Stephen Henson <steve@openssl.org>
Create app_load_config(), a routine to load config file. Remove the
"always load config" from the main app. Change the places that used to
load config to call the new common routine.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add support for PKCS#8 private key encryption using the scrypt algorithm
in the pkcs8 utility. Update documentation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
