This should never reduce the range covered and might increase it on some
platforms.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8415)
From a Unix point of view, some other platform families have certain
quirks. Windows command prompt doesn't expand globs into actual file
names, so we must do this. VMS has some oddity with argv pointer size
that can cause crashes if you're not careful (by copying it to a less
surprising pointer size array).
The fixups already exist and are used in the apps/ code. However, the
testutil code started using the opt routines from apps/ without
including the non-Unix fixups. This change fixes that.
For VMS' sake, libtestutil gets an app_malloc() shim, to avoid sucking
in all of apps/apps.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8381)
SSH's KDF is defined in RFC 4253 in Section 7.2
Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7290)
Some signature algorithms require special treatment for digesting, such
as SM2. This patch adds the ability of handling raw input data in
apps/pkeyutl other than accepting only pre-hashed input data.
Beside, SM2 requries an ID string when signing or verifying a piece of data,
this patch also adds the ability for apps/pkeyutil to specify that ID
string.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)
There is too high a risk that perl and OpenSSL are linked with
different C RTLs, and thereby get different messages for even the most
mundane error numbers.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8343)
Prior to this commit we were keeping a count of how many KeyUpdates we
have processed and failing if we had had too many. This simplistic approach
is not sufficient for long running connections. Since many KeyUpdates
would not be a particular good DoS route anyway, the simplest solution is
to simply remove the key update count.
Fixes#8068
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8299)
This commit adds a simple unit test to make sure that the constant-time
flag does not "leak" among BN_CTX frames:
- test_ctx_consttime_flag() initializes (and later frees before
returning) a BN_CTX object, then it calls in sequence
test_ctx_set_ct_flag() and test_ctx_check_ct_flag() using the same
BN_CTX object. The process is run twice, once with a "normal"
BN_CTX_new() object, then with a BN_CTX_secure_new() one.
- test_ctx_set_ct_flag() starts a frame in the given BN_CTX and sets the
BN_FLG_CONSTTIME flag on some of the BIGNUMs obtained from the frame
before ending it.
- test_ctx_check_ct_flag() then starts a new frame and gets a number of
BIGNUMs from it. In absence of leaks, none of the BIGNUMs in the new
frame should have BN_FLG_CONSTTIME set.
In actual BN_CTX usage inside libcrypto the leak could happen at any
depth level in the BN_CTX stack, with varying results depending on the
patterns of sibling trees of nested function calls sharing the same
BN_CTX object, and the effect of unintended BN_FLG_CONSTTIME on the
called BN_* functions.
This simple unit test abstracts away this complexity and verifies that
the leak does not happen between two sibling functions sharing the same
BN_CTX object at the same level of nesting.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8253)
Because test order can be randomized, running foo_init() as a separate
test is unsafe practice. Instead, we make it possible to call it
multiple times, and call it at the start of each separate test.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8288)
A randomised order causes failure due to unintentional dependencies between
two of the test cases.
[extended tests]
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8279)
Properties are a sequence of comma separated name=value pairs. A name
without a corresponding value is assumed to be a Boolean and have the
true value 'yes'. Values are either strings or numbers. Strings can be
quoted either _"_ or _'_ or unquoted (with restrictions). There are no
escape characters inside strings. Number are either decimal digits or
'0x' followed by hexidecimal digits. Numbers are represented internally
as signed sixty four bit values.
Queries on properties are a sequence comma separated conditional tests.
These take the form of name=value (equality test), name!=value (inequality
test) or name (Boolean test for truth). Queries can be parsed, compared
against a definition or merged pairwise.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8224)
The context builds on CRYPTO_EX_DATA, allowing it to be dynamically
extended with new data from the different parts of libcrypto.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
This allows allocation of items at indexes that were created after the
CRYPTO_EX_DATA variable was initialized, using the exact same method
that was used then.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8225)
New function to return internal pointer for field.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8195)
Add SSL_OP64_NO_EXTENDED_MASTER_SECRET, that can be set on either
an SSL or an SSL_CTX. When processing a ClientHello, if this flag
is set, do not indicate that the EMS TLS extension was received in
either the ssl3 object or the SSL_SESSION. Retain most of the
sanity checks between the previous and current session during
session resumption, but weaken the check when the current SSL
object is configured to not use EMS.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3910)
Otherwise this can result in an incorrect calculation of the maximum
encoded integer length, meaning an insufficient buffer size is allocated.
Thanks to Billy Brumley for helping to track this down.
Fixes#8209
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8237)
The original 1.1.1 design was to use SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal start/end of a post-handshake message
exchange in TLSv1.3. Unfortunately experience has shown that this confuses
some applications who mistake it for a TLSv1.2 renegotiation. This means
that KeyUpdate messages are not handled properly.
This commit removes the use of SSL_CB_HANDSHAKE_START and
SSL_CB_HANDSHAKE_DONE to signal the start/end of a post-handshake
message exchange. Individual post-handshake messages are still signalled in
the normal way.
This is a potentially breaking change if there are any applications already
written that expect to see these TLSv1.3 events. However, without it,
KeyUpdate is not currently usable for many applications.
Fixes#8069
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8096)
set_cipher_list() sets TLSv1.2 (and below) ciphers, and its success or
failure should not depend on whether set_ciphersuites() has been used to
setup TLSv1.3 ciphers.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7759)
Iterators over the sparse array structures have gained an initial argument
which indicates the index into the array of the element. This can be used,
e.g., to delete or modify the associated value.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8229)
Changed PKEY/KDF API to call the new API.
Added wrappers for PKCS5_PBKDF2_HMAC() and EVP_PBE_scrypt() to call the new EVP KDF APIs.
Documentation updated.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6674)
This got triggered by test/testutil.h including ../apps/opt.h.
Some compilers do all inclusions from the directory of the C file
being compiled, so when a C file includes a header file with a
relative file spec, and that header file also includes another header
file with a relative file spec, the compiler no longer follows.
As a specific example, test/testutil/basic_output.c included
../testutil.h. Fine so far, but then, test/testutil.h includes
../apps/opt.h, and the compiler ends up trying to include (seen from
the source top) test/apps/opt.h rather than apps/opt.h, and fails.
The solution could have been to simply add apps/ as an inclusion
directory. However, that directory also has header files that have
nothing to do with libapps, so we take this a bit further, create
apps/include and move libapps specific headers there, and then add
apps/include as inclusion directory in the build.info files where
needed.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8210)
This commit adds a space and time efficient sparse array data structure.
The structure's raw API is wrapped by inline functions which provide type
safety.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8197)
If the old openssl versions not supporting the .include directive
load a config file with it, they will bail out with error.
This change allows using the .include = <filename> syntax which
is interpreted as variable assignment by the old openssl
config file parser.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8141)
The manual says this in its notes:
... and therefore applications using static linking should also call
OPENSSL_thread_stop() on each thread. ...
Fixes#8171
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8173)
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7726)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
There was a hack specifically for VMS, which involved setting a make
variable to indicate that test/libtestutil contains a 'main'.
Instead, we use the new attributes 'has_main' to indicate this, and
let the VMS build file template fend with it appropriately.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8125)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8111)
A CAdES Basic Electronic Signature (CAdES-BES) contains, among other
specifications, a collection of Signing Certificate reference attributes,
stored in the signedData ether as ESS signing-certificate or as
ESS signing-certificate-v2. These are described in detail in Section 5.7.2
of RFC 5126 - CMS Advanced Electronic Signatures (CAdES).
This patch adds support for adding ESS signing-certificate[-v2] attributes
to CMS signedData. Although it implements only a small part of the RFC, it
is sufficient many cases to enable the `openssl cms` app to create signatures
which comply with legal requirements of some European States (e.g Italy).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7893)
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Signed-off-by: Ping Yu <ping.yu@intel.com>
Signed-off-by: Steven Linsell <stevenx.linsell@intel.com>
(Merged from https://github.com/openssl/openssl/pull/7573)
During a DTLS handshake we may need to periodically handle timeouts in the
DTLS timer to ensure retransmits due to lost packets are performed. However,
one peer will always complete a handshake before the other. The DTLS timer
stops once the handshake has finished so any handshake messages lost after
that point will not automatically get retransmitted simply by calling
DTLSv1_handle_timeout(). However attempting an SSL_read implies a
DTLSv1_handle_timeout() and additionally will process records received from
the peer. If those records are themselves retransmits then we know that the
peer has not completed its handshake yet and a retransmit of our final
flight automatically occurs.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8047)
This means that all PROGRAMS_NO_INST, LIBS_NO_INST, ENGINES_NO_INST
and SCRIPTS_NO_INST are changed to be PROGRAM, LIBS, ENGINES and
SCRIPTS with the associated attribute 'noinst'.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
The platform module collection is made in such a way that any Perl
script that wants to take part of the available information can use
them just as well as the build system.
This change adapts test/recipes/90-test_shlibload.t, util/mkdef.pl,
and util/shlib_wrap.sh.in
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7473)
If you use a BIO and set up your own buffer that is not freed, the
memory bio will leak the BIO_BUF_MEM object it allocates.
The trouble is that the BIO_BUF_MEM is allocated and kept around,
but it is not freed if BIO_NOCLOSE is set.
The freeing of BIO_BUF_MEM was fairly confusing, simplify things
so mem_buf_free only frees the memory buffer and free the BIO_BUF_MEM
in mem_free(), where it should be done.
Alse add a test for a leak in the memory bio
Setting a memory buffer caused a leak.
Signed-off-by: Corey Minyard <minyard@acm.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8051)
