Make the include guards consistent by renaming them systematically according
to the naming conventions below
The public header files (in the 'include/openssl' directory) are not changed
in 1.1.1, because it is a stable release.
For the private header files files, the guard names try to match the path
specified in the include directives, with all letters converted to upper case
and '/' and '.' replaced by '_'. An extra 'OSSL_' is added as prefix.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
Currently, there are two different directories which contain internal
header files of libcrypto which are meant to be shared internally:
While header files in 'include/internal' are intended to be shared
between libcrypto and libssl, the files in 'crypto/include/internal'
are intended to be shared inside libcrypto only.
To make things complicated, the include search path is set up in such
a way that the directive #include "internal/file.h" could refer to
a file in either of these two directoroes. This makes it necessary
in some cases to add a '_int.h' suffix to some files to resolve this
ambiguity:
#include "internal/file.h" # located in 'include/internal'
#include "internal/file_int.h" # located in 'crypto/include/internal'
This commit moves the private crypto headers from
'crypto/include/internal' to 'include/crypto'
As a result, the include directives become unambiguous
#include "internal/file.h" # located in 'include/internal'
#include "crypto/file.h" # located in 'include/crypto'
hence the superfluous '_int.h' suffixes can be stripped.
The files 'store_int.h' and 'store.h' need to be treated specially;
they are joined into a single file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
Due to the dynamic allocation that was added to rand_pool_add_begin
this function could now return a null pointer where it was previously
guaranteed to succeed. But the return value of this function does
not need to be checked by design.
Move rand_pool_grow from rand_pool_add_begin to rand_pool_bytes_needed.
Make an allocation error persistent to avoid falling back to less secure
or blocking entropy sources.
Fixes: a6a66e4511 ("Make rand_pool buffers more dynamic in their sizing.")
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9687)
(cherry picked from commit fa3eb248e29ca8031e6a14e8a2c6f3cd58b5450e)
There was a warning about unused variables in this config:
./config --strict-warnings --with-rand-seed=rdcpu
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9687)
(cherry picked from commit e301c147a763f67dcc5ba63eb7e2ae40d83a68aa)
Since commit 7c226dfc43 a chained DRBG does not add additional
data anymore when reseeding from its parent. The reason is that
the size of the additional data exceeded the allowed size when
no derivation function was used.
This commit provides an alternative fix: instead of adding the
entire DRBG's complete state, we just add the DRBG's address
in memory, thereby providing some distinction between the different
DRBG instances.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9802)
Provides a little extra fork-safety on UNIX systems, adding to the
fact that all DRBGs reseed automatically when the fork_id changes.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9802)
When the new OpenSSL CSPRNG was introduced in version 1.1.1,
it was announced in the release notes that it would be fork-safe,
which the old CSPRNG hadn't been.
The fork-safety was implemented using a fork count, which was
incremented by a pthread_atfork handler. Initially, this handler
was enabled by default. Unfortunately, the default behaviour
had to be changed for other reasons in commit b5319bdbd0, so
the new OpenSSL CSPRNG failed to keep its promise.
This commit restores the fork-safety using a different approach.
It replaces the fork count by a fork id, which coincides with
the process id on UNIX-like operating systems and is zero on other
operating systems. It is used to detect when an automatic reseed
after a fork is necessary.
To prevent a future regression, it also adds a test to verify that
the child reseeds after fork.
CVE-2019-1549
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9802)
This will never be the case for 1.1.1 so removed.
Fixes: comment 1 of #9757
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9762)
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9734)
(cherry picked from commit 46a9cc9451213039fd53f62733b2ccd04e853bb2)
There is a problem in the rand_unix.c code when the random seed fd is greater
than or equal to FD_SETSIZE and the FDSET overruns its limit and walks the
stack.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9686)
(cherry picked from commit e1f8584d47)
Improve handling of low entropy at start up from /dev/urandom by waiting for
a read(2) call on /dev/random to succeed. Once one such call has succeeded,
a shared memory segment is created and persisted as an indicator to other
processes that /dev/urandom is properly seeded.
This does not fully prevent against attacks weakening the entropy source.
An attacker who has control of the machine early in its boot sequence
could create the shared memory segment preventing detection of low entropy
conditions. However, this is no worse than the current situation.
An attacker would also be capable of removing the shared memory segment
and causing seeding to reoccur resulting in a denial of service attack.
This is partially mitigated by keeping the shared memory alive for the
duration of the process's existence. Thus, an attacker would not only need
to have called call shmctl(2) with the IPC_RMID command but the system
must subsequently enter a state where no instances of libcrypto exist in
any process. Even one long running process will prevent this attack.
The System V shared memory calls used here go back at least as far as
Linux kernel 2.0. Linux kernels 4.8 and later, don't have a reliable way
to detect that /dev/urandom has been properly seeded, so a failure is raised
for this case (i.e. the getentropy(2) call has already failed).
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9595)
[manual merge]
Fix a few places where calling ossl_isdigit does the wrong thing on
EBCDIC based systems.
Replaced with ascii_isdigit.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9556)
(cherry picked from commit 48102247ff)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9295)
The rand pool support allocates maximal sized buffers -- this is typically
12288 bytes in size. These pools are allocated in secure memory which is a
scarse resource. They are also allocated per DRBG of which there are up to two
per thread.
This change allocates 64 byte pools and grows them dynamically if required.
64 is chosen to be sufficiently large so that pools do not normally need to
grow.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9428)
(cherry picked from commit a6a66e4511)
The additional data allocates 12K per DRBG instance in the
secure memory, which is not necessary. Also nonces are not
considered secret.
[extended tests]
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9424)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9149)
The DEVRANDOM_WAIT feature added a select() call to wait for the
`/dev/random` device to become readable before reading from the
`/dev/urandom` device. It was introduced in commit 38023b87f0
in order to mitigate the fact that the `/dev/urandom` device
does not block until the initial seeding of the kernel CSPRNG
has completed, contrary to the behaviour of the `getrandom()`
system call.
It turned out that this change had negative side effects on
performance which were not acceptable. After some discussion it
was decided to revert this feature and leave it up to the OS
resp. the platform maintainer to ensure a proper initialization
during early boot time.
Fixes#9078
This partially reverts commit 38023b87f0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit a08714e181)
(Merged from https://github.com/openssl/openssl/pull/9118)
I turns out that this made crypto/rand/rand_win.c to never build with
BCrypt support unless the user sets _WIN32_WINNT. That wasn't the
intent.
This reverts commit cc8926ec8f.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8641)
(cherry picked from commit 705a27f7e0)
Use select to wait for /dev/random in readable state,
but do not actually read anything from /dev/random,
use /dev/urandom first.
Use linux define __NR_getrandom instead of the
glibc define SYS_getrandom, in case the kernel headers
are more current than the glibc headers.
Fixes#8215
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8251)
(cherry picked from commit 38023b87f0)
Commit c7504aeb64 (pr #6432) fixed a regression for applications in
chroot environments, which compensated the fact that the new OpenSSL CSPRNG
(based on the NIST DRBG) now reseeds periodically, which the previous
one didn't. Now the reseeding could fail in the chroot environment if the
DEVRANDOM devices were not present anymore and no other entropy source
(e.g. getrandom()) was available.
The solution was to keep the file handles for the DEVRANDOM devices open
by default. In fact, the fix did more than this, it opened the DEVRANDOM
devices early and unconditionally in rand_pool_init(), which had the
unwanted side effect that the devices were opened (and kept open) even
in cases when they were not used at all, for example when the getrandom()
system call was available. Due to a bug (issue #7419) this even happened
when the feature was disabled by the application.
This commit removes the unconditional opening of all DEVRANDOM devices.
They will now only be opened (and kept open) on first use. In particular,
if getrandom() is available, the handles will not be opened unnecessarily.
This change does not introduce a regression for applications compiled for
libcrypto 1.1.0, because the SSLEAY RNG also seeds on first use. So in the
above constellation the CSPRNG will only be properly seeded if it is happens
before the forking and chrooting.
Fixes#7419
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7437)
(cherry picked from commit 8cfc19716c)
... to make the intended use more clear and differentiate
it from the data member "adin_pool".
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7575)
(cherry picked from commit 31f32abb8e)
