Commit 7823d792d0 added DEFINE_LHASH_OF
to a C source file. DEFINE_LHASH_OF() and DEFINE_STACK_OF() must
be used only in header files to avoid clang warnings for unused
static-inline functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Also tweak some of the code in demos/bio, to enable interactive
testing of BIO_s_accept's use of SSL_dup. Changed the sconnect
client to authenticate the server, which now exercises the new
SSL_set1_host() function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
A call to X509_verify_cert() is used to build a chain of certs for the
server to send back to the client. It isn't *actually* used for verifying
the cert at all - just building the chain. Therefore the return value is
ignored.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
The SSL structure contained a "type" variable that was set to either
SSL_ST_ACCEPT or SSL_ST_CONNECT depending on whether we are the server or
the client. This duplicates the capability of the "server" variable and was
actually rarely used.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Much related/similar work also done by
Ivan Nestlerode <ivan.nestlerode@sonos.com>
+Replace FILE BIO's with dummy ops that fail.
+Include <stdio.h> for sscanf() even with no-stdio (since the declaration
is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment
variable, since it can be larger than a 'long'. And we don't rely on the
availability of strtoull().
+Remove OPENSSL_stderr(); not used.
+Make OPENSSL_showfatal() do nothing (currently without stdio there's
nothing we can do).
+Remove file-based functionality from ssl/. The function
prototypes were already gone, but not the functions themselves.
+Remove unviable conf functionality via SYS_UEFI
+Add fallback definition of BUFSIZ.
+Remove functions taking FILE * from header files.
+Add missing DECLARE_PEM_write_fp_const
+Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out,
so remove its prototype.
+Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid().
+Eliminate SRP_VBASE_init() and supporting functions. Users will need to
build the verifier manually instead.
+Eliminate compiler warning for unused do_pk8pkey_fp().
+Disable TEST_ENG_OPENSSL_PKEY.
+Disable GOST engine as is uses [f]printf all over the place.
+Eliminate compiler warning for unused send_fp_chars().
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
For server use a PSK identity hint value in the CERT structure which
is inherited when SSL_new is called and which allows applications to
set hints on a per-SSL basis. The previous version of
SSL_use_psk_identity_hint tried (wrongly) to use the SSL_SESSION structure.
PR#4039
Reviewed-by: Matt Caswell <matt@openssl.org>
There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: Richard Levitte <levitte@openssl.org>
As numerous comments indicate the certificate and key array is not an
appopriate structure to store the peers certificate: so remove it and
just the s->session->peer instead.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move per-connection state out of the CERT structure: which should just be
for shared configuration data (e.g. certificates to use).
In particular move temporary premaster secret, raw ciphers, peer signature
algorithms and shared signature algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are header files in crypto/ that are used by the rest of
OpenSSL. Move those to include/internal and adapt the affected source
code, Makefiles and scripts.
The header files that got moved are:
crypto/constant_time_locl.h
crypto/o_dir.h
crypto/o_str.h
Reviewed-by: Matt Caswell <matt@openssl.org>
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy. Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: Richard Levitte <levitte@openssl.org>
For a local variable:
TYPE *p;
Allocations like this are "risky":
p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption. Instead do this:
p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the finale, the "real" final part. :) Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't check for NULL before calling a free routine. This gets X509_.*free:
x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: Richard Levitte <levitte@openssl.org>
EVP_.*free; this gets:
EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free
EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it
EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: Matt Caswell <matt@openssl.org>
It created the cert structure in SSL_CTX or SSL if it was NULL, but they can
never be NULL as the comments already said.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
I left many "#if 0" lines, usually because I thought we would
probably want to revisit them later, or because they provided
some useful internal documentation tips.
Reviewed-by: Andy Polyakov <appro@openssl.org>
