In 1.1.0 changing the ciphersuite during a renegotiation can result in
a crash leading to a DoS attack. In master this does not occur with TLS
(instead you get an internal error, which is still wrong but not a security
issue) - but the problem still exists in the DTLS code.
The problem is caused by changing the flag indicating whether to use ETM
or not immediately on negotiation of ETM, rather than at CCS. Therefore,
during a renegotiation, if the ETM state is changing (usually due to a
change of ciphersuite), then an error/crash will occur.
Due to the fact that there are separate CCS messages for read and write
we actually now need two flags to determine whether to use ETM or not.
CVE-2017-3733
Reviewed-by: Richard Levitte <levitte@openssl.org>
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
Add function to retrieve signature type: in the case of RSA
keys the signature type can be EVP_PKEY_RSA or EVP_PKEY_RSA_PSS.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)
The newly added SSL3_CK_CIPHERSUITE_FLAG shouldn't be in a public header
file
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Changing the value of SSL_MAX_MASTER_KEY_LENGTH had some unexpected
side effects in the <=TLS1.2 code which apparently relies on this being
48 for interoperability. Therefore create a new define for the TLSv1.3
resumption master secret which can be up to 64 bytes.
Found through the boring test suite.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
This mops up various edge cases with key_shares and makes sure we still
generate the handshake secret if we haven't been provided with one but we
have a PSK.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
Requires a refactor of the ServerHello parsing, so that we parse first and
then subsequently process. This is because the resumption information is
held in the extensions block which is parsed last - but we need to know that
information earlier.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
The record layer was making decisions that should really be left to the
state machine around unexpected handshake messages that are received after
the initial handshake (i.e. renegotiation related messages). This commit
removes that code from the record layer and updates the state machine
accordingly. This simplifies the state machine and paves the way for
handling other messages post-handshake such as the NewSessionTicket in
TLSv1.3.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)
When the client reads DH parameters from the TLS stream, we only
checked that they all are non-zero. This change updates the check to
use DH_check_params()
DH_check_params() is a new function for light weight checking of the p
and g parameters:
check that p is odd
check that 1 < g < p - 1
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
When doing in place encryption the overlapping buffer check can fail
incorrectly where we have done a partial block "Update" operation. This
fixes things to take account of any pending partial blocks.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2275)
Add Poly1305 as a "signed" digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2128)
... mostly related to some old discarded modules .
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1906)
RUN_ONCE really just returns 0 on failure or whatever the init
function returned. By convention, however, the init function must
return 0 on failure and 1 on success. This needed to be clarified.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2225)
Enhance find-doc-nits to be better about finding typedefs for
callback functions. Fix all nits it now finds. Added some new
typedef names to ssl.h some of which were documented but did not
exist
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2151)
New function rsa_pss_get_param to extract and sanity check PSS parameters.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Pad mode setting returns an error if the mode is anything other then PSS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
New function EVP_PKEY_CTX_md() which takes a string and passes a digest
to a ctrl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Add support for common operations in PSS by adding a new function
RSA_pkey_ctx_ctrl() which calls EVP_PKEY_CTX_ctrl if the key type
is RSA or PSS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
For RSA PSS keys encode and decode parameters when handling public
and private keys.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
Store hash algorithm used for MGF1 masks in PSS and OAEP modes in PSS and
OAEP parameter structure: this avoids the need to decode part of the ASN.1
structure every time it is used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2177)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
This macro has a typo in it which makes it unusable. This issue was already
fixed in 1.0.2 in commit 75fdee0482, but the same fix was not applied to
other branches.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2160)
Commit 0cd0a820ab removed this macro
along with many unused function and reason codes; ERR_FATAL_ERROR()
was not used in the tree, but did have external consumers.
Add it back to restore the API compatibility and avoid breaking
applications for no internal benefit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2049)
Various functions got renamed. We need to rename the error codes too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The _clienthello_ in the extensions parsing functions is overly specific.
Better to keep the convention to just _client_
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This lays the foundation for a later move to have the extensions built and
placed into the correct message for TLSv1.3 (e.g. ServerHello or
EncryptedExtensions).
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This builds on the work started in 1ab3836b3 and extends is so that
each extension has its own identified parsing functions, as well as an
allowed context identifying which messages and protocols it is relevant for.
Subsequent commits will do a similar job for the ServerHello extensions.
This will enable us to have common functions for processing extension blocks
no matter which of the multiple messages they are received from. In TLSv1.3
a number of different messages have extension blocks, and some extensions
have moved from one message to another when compared to TLSv1.2.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
TTY_get() sometimes surprises us with new errno values to determine if
we have a controling terminal or not. This generated error is a
helpful tool to figure out that this was what happened and what the
unknown value is.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2043)
Since there are many parts of UI_process() that can go wrong, it isn't
very helpful to only return -1 with no further explanation. With this
change, the error message will at least show which part went wrong.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2037)
There is a set of miscellaneous processing for OCSP, CT etc at the end of
the ServerDone processing. In TLS1.3 we don't have a ServerDone, so this
needs to move elsewhere.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
ssl_test_old was reaching inside the SSL structure and changing the internal
BIO values. This is completely unneccessary, and was causing an abort in the
test when enabling TLSv1.3.
I also removed the need for ssl_test_old to include ssl_locl.h. This
required the addition of some missing accessors for SSL_COMP name and id
fields.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the moment the server doesn't yet do anything with this information.
We still need to send the server's key_share info back to the client. That
will happen in subsequent commits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In this commit we just generate the extension on the client side, but don't
yet do anything with it. Subsequent commits, will add the server side
capability.
At the moment we hard code a single key_share. In the future we should make
this configurable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Do not call the time "current", as a different time can be provided.
For example, a time slightly in the future, to provide tolerance for
CT logs with a clock that is running fast.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1554)
ctlog_new_null() no longer exists.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1554)
prio openssl 1.1.0 seed_len < q was accepted and the seed argument was
then ignored. Now DSA_generate_parameters_ex() returns an error in such
a case but no error string.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1657)
This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: Rich Salz <rsalz@openssl.org>
