No more special casing for that one, and this means it gets displayed
by 'perl configdata.pm --make-variables' among all the others.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5247)
Most of all, this is so it doesn't output mysterious text when we're
treating the phony config targets LISH, HASH and TABLE
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5383)
configdata.pm -d prints out a lot of information, including a table
of what features are disabled, why, and the effect of that disablement
(in terms of preprocessor symbols defined and directories skipped).
The first column is already auto-sized, to easily accomodate future
disableable features with long names. Also auto-size the second column,
to accomodate future reasons for disablement with long names as well.
Failing to take such precautions results in stderr spew from
configdata.pm -d when such long reasons are in use:
Negative repeat count does nothing at ./configdata.pm line 14504.
Such output is pretty distracting from the actual desired output,
so try to avoid it if possible.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5371)
The contents of that attribute is C file names, not object file names.
This went undetected because quite a lot of systems have assembler
implementations anyway, so setting OPENSSL_CPUID_OBJ was correct for
them.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5291)
Patch by @levitte.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5231)
INSTALL: Mention 'aria' algorithm for no-<alg>
Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5215)
This message will ONLY be visible in OpenSSL 1.1.1, it will not show
in 1.1.1a or any other release or update.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5185)
The additional possibility is:
perl configdata.pm --options Display the features, both
enabled and disabled, and
display defined macro and
skipped directories where
applicable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5185)
The "make variable" information displayed by Configure was selective
and incomplete, and possibly undesirable (too verbose).
Instead, we make configdata.pm and have the user run it to get the
information they desire, and also make it possible to have it perform
a reconfiguration.
Possibilities so far:
perl configdata.pm --dump Displays everything (i.e. the
combined output from
--command-line, --environment,
--make-variables and
--build-parameters.
perl configdata.pm --command-line Displays the config command
line.
perl configdata.pm --envirnoment Displays the recorded
environment variables.
perl configdata.pm --make-variables Displays the configured "make
variables".
perl configdata.pm --build-parameters Displays the build file and
the template files to create
it.
perl configdata.pm --reconfigure Re-runs the configuration with
the recorded environment
variables.
--verbose can be used to have --reconfigure be a bit more verbose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5185)
C++ flags got the same config target value as C flags, but then
nothing else happened while C flags get all kinds of stuff added to
them (especially when --strict-warnings is used).
Now, C++ flags get the exact same treatment as C flags. However, this
only happens when a C++ compiler is specified, to avoid confusing
messages about added C++ flags.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5181)
Default values belong in the DEFAULT config target template, in
Configurations/00-base-templates.conf.
This isn't a complete move, but takes care of the most blatant
examples.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
Support the following "make variables":
AR (GNU compatible)
ARFLAGS (GNU Compatible)
AS (GNU Compatible)
ASFLAGS (GNU Compatible)
CC (GNU Compatible)
CFLAGS (GNU Compatible)
CXX (GNU Compatible)
CXXFLAGS (GNU Compatible)
CPP (GNU Compatible)
CPPFLAGS (GNU Compatible)
CPPDEFINES List of CPP macro definitions. Alternative for -D
CPPINCLUDES List of CPP inclusion directories. Alternative for -I
HASHBANGPERL Perl invocation to be inserted after '#!' in public
perl scripts.
LDFLAGS (GNU Compatible)
LDLIBS (GNU Compatible)
RANLIB Program to generate library archive index
RC Program to manipulate Windows resources
RCFLAGS Flags for $(RC)
RM (GNU Compatible)
Setting one of these overrides the corresponding data from our config
targets. However, flags given directly on the configuration command
line are additional, and are therefore added to the flags coming from
one of the variables above or the config target.
Fixes#2420
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
C preprocessor flags get separated from C flags, which has the
advantage that we don't get loads of macro definitions and inclusion
directory specs when linking shared libraries, DSOs and programs.
This is a step to add support for "make variables" when configuring.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5177)
We incorrectly assumed that explicit dependencies meant that the
source directory would be added for inclusion. However, if the
dependent file is generated, it's stored in the build directory, and
that should be used for inclusion rather than the source directory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5153)
This ensures that only one set of includes is associated with each
object file, reagardless of where it's used.
For example, if apps/build.info has this:
SOURCE[openssl]=foo.c
INCLUDE[openssl]=.. ../include
and test/build.info has this:
SOURCE[footest]=../apps/foo.c
INCLUDE[footest]=../include
The inclusion directories used for apps/foo.o would differ depending
on which program's dependencies get generated first in the build file.
With this change, all those INCLUDEs get combined into one set of
inclusion directories tied to the object file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5153)
So far, we've placed all extra library related flags together, ending
up in the make variable EX_LIBS. This turns out to be problematic, as
for example, some compilers don't quite agree with something like
this:
cc -o foo foo.o -L/whatever -lsomething
They prefer this:
cc -L/whatever -o foo foo.o -lsomething
IBM's compiler on OS/390 is such a compiler that we know of, and we
have previously handled that as a previous case.
The answer here is to make a more general solution, where linking
options are divided in two parts, where one ends up in LDFLAGS and
the other in EX_LIBS (they corresponds to what is called LDFLAGS and
LDLIBS in the GNU world)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5033)
Following the changes that removed Makefile.shared, we also changed
the generation of .def / .map / .opt files from ordinals more
explicit, removing the need to the "magic" ORDINALS declaration.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4993)
This got lost somehow. The methods to do makedepend on Windows and
VMS are hard coded for cl (Windows) and CC/DECC (VMS), because that's
what we currently support natively.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4907)
This makes it possible to add build.info statements for using resource
files as well as linker scripts (.def for Windows, .map for Unix, and
.opt for VMS) is if they were source files. This requires changes in
the build file templates.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
This will replace the use of Makefile.shared
This also means a small adjustment on how the attributes dso_cflags,
dso_cxxflags and dso_lflags are treated. They were previously treated
as an extension to shared_cflag, shared_cxxflag and shared_ldflag, but
they should really be regarded as alternatives instead, for example
for darwin, where -dynamiclib is used for shared libraries and -bundle
for DSOs.
We take the opportunity to clean out things that are redundant or
otherwise superfluous (for example the check of GNU ld on platforms
where it never existed).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
It will return the last expression from the input file.
We also use this in read_config, which slightly changes what's
expected of Configurations/*.conf. They do not have to assign
%targets specifically. On the other hand, the table of configs MUST
be the last expression in each of those files.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4840)
It's better to inform the user about this than silently ignoring
something that the user might expect to work, somehow.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4818)
In other words, make the following possible:
./config CC=clang
or
./Configure CC=clang linux-x86_64
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4818)
There are cases when we overwrite %ENV values, and while this is
perfectly fine on some platforms, it isn't on others, because the
Configure script isn't necessarely run in a separate process, and
thus, changing %ENV may very well change the environment of the
calling shell. VMS is such a platform.
Furthermore, saving away values that we use also allow us to save them
in configdata.pm in an effective way, and recall those values just as
effectively when reconfiguring. Also, this makes sure that we do use
the saved away values when reconfiguring, when the actual environment
variables might otherwise affect us.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4818)
Around 138 distinct errors found and fixed; thanks!
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3459)
'rsa', 'sha' and 'tlsext' can't be disabled, not even as a consequence
of other conditions, so having cascading disables that depend on them
is futile. Clean up!
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4693)
SM3 is a secure hash function which is part of the Chinese
"Commercial Cryptography" suite of algorithms which use is
required for certain commercial applications in China.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4616)
The warning flag in question was added in GCC version 6, hence
addition has to be conditional.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4401)
Detect clang even if it's disguised, e.g. cross-compiler or invoked by
explicit path name, and add the option based on that.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4383)
crypto/rand/rand_egd.c makes extensive use of stdio functions. When
they are disabled, it makes sense to disable egd as well.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4358)
The commit subject is a bit misleading in sense that decisions affect
only gcc and gcc-alikes, like clang, recent icc...
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4281)
Instead of having perl modules under test/testlib, util and util/perl,
consolidate them all to be inside util/perl.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4069)
File::Glob::glob is deprecated, it's use generates this kind of
message:
File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277.
So instead, use a construction that makes the caller glob() use
File::Glob::bsd_glob().
Note that we're still excluding VMS, as it's directory specs use '['
and ']', which have a different meaning with bsd_glob and would need
some extra quoting. This might change, but later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4040)
$(SHLIB_MAJOR).$(SHLIB_MINOR) is really a synonym for
$(SHLIB_VERSION_NUMBER), and is therefore an added complexity,
so better to use $(SHLIB_VERSION_NUMBER) directly. SHLIB_MAJOR and
SHLIB_MINOR are now unused, but are kept around purely as information
in case someone relies on their existence.
At the same time, add support for custom shared library extensions
with the three new Makefile variables SHLIB_EXT, SHLIB_EXT_SIMPLE and
SHLIB_EXT_IMPORT. By default, they hold the variants of shared
library extensions we support. On mingw and cygwin, SHLIB_EXT_IMPORT
is defined; on all other Unix platforms, it's empty.
An example to get shared libraries with a slightly different SOVER name:
$ make SHLIB_EXT='.$(SHLIB_VERSION_NUMBER).so'
Fixes#3902
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3964)
Add a new config param to specify how the CSPRNG should be seeded.
Illegal values or nonsensical combinations (e.g., anything other
than "os" on VMS or HP VOS etc) result in build failures.
Add RDSEED support.
Add RDTSC but leave it disabled for now pending more investigation.
Refactor and reorganization all seeding files (rand_unix/win/vms) so
that they are simpler.
Only require 128 bits of seeding material.
Many document improvements, including why to not use RAND_add() and the
limitations around using load_file/write_file.
Document RAND_poll().
Cleanup Windows RAND_poll and return correct status
More completely initialize the default DRBG.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3965)
Instead, make it possible to disable the console reader that's part of
the UI module. This makes it possible to use the UI API and other UI
methods in environments where the console reader isn't useful.
To disable the console reader, configure with 'no-ui-console' /
'disable-ui-console'.
'no-ui' / 'disable-ui' is now an alias for 'no-ui-console' /
'disable-ui-console'.
Fixes#3806
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3820)
There are no public TLSv1_3_*method() functions so
OPENSSL_NO_TLS1_3_METHOD doesn't make any sense and should be removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3800)
This STORE module adds the following functionality:
- A function OSSL_STORE_open(), OSSL_STORE_load() and OSSL_STORE_close()
that accesses a URI and helps loading the supported objects (PKEYs,
CERTs and CRLs for the moment) from it.
- An opaque type OSSL_STORE_INFO that holds information on each loaded
object.
- A few functions to retrieve desired data from a OSSL_STORE_INFO
reference.
- Functions to register and unregister loaders for different URI
schemes. This enables dynamic addition of loaders from applications
or from engines.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3542)
For DES and 3DES based ciphers are also enabled by this option.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3707)
"Configuring..." was displayed with './Configure LIST'. This reorders
the display of that line to happen after the "targets" LIST, TABLE and
HASH have been checked.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3702)
Since the clang_devteam_warnings are appended to the gcc_devteam_warnings
when strict-warnings are requested, any items present in both the gcc
and clang variables will be duplicated in the cflags used for clang builds.
Remove the extra copy from the clang-specific flags in favor of the
gcc_devteam_warnings that are used for all strict-warnings builds.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3239)
clang already has it; let's flip the switch and deal with the fallout.
Exclude -Wunused-parameter, as we have many places where we keep unused
parameters to conform to a uniform vtable-like interface.
Also exclude -Wmissing-field-initializers; it's okay to rely on
the standard-mandated behavior of filling out with 0/NULL.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3239)
Configure started with 'require 5.10.0', but if executed by older perl
it failed with "might be runaway multi-line // string" instead of
naturally expected "Perl v5.10.0 required--this is only v5.x.y".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Make it disabled by default. When TLSv1.3 is out of draft we can remove
this option and have it enabled all the time.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3022)
For each platform, we may need to perform some basic checks to see
that available tools perform as we expect them.
For the moment, the added checkers test that Perl gives the expected
path format. This should help MingW users to see if they run an
appropriate Perl implementation, for example.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2851)
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
Avoid a -Wundef warning in refcount.h
Avoid a -Wundef warning in o_str.c
Avoid a -Wundef warning in testutil.h
Include internal/cryptlib.h before openssl/stack.h
to avoid use of undefined symbol OPENSSL_API_COMPAT.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2712)
There has never been any gcc option of that kind.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2705)
This implementation is written in endian agnostic C code. No attempt
at providing machine specific assembly code has been made. This
implementation expands the evptests by including the test cases from
RFC 5794 and ARIA official site rather than providing an individual
test case. Support for ARIA has been integrated into the command line
applications, but not TLS. Implemented modes are CBC, CFB1, CFB8,
CFB128, CTR, ECB and OFB128.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2337)
The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)
This is something you might want to change depending on the version to
use, there is no point in us fixing this to something.
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #2023
engines/e_padlock.c assumes that for all x86 and x86_64 platforms, the
lower level routines will be present. However, that's not always
true, for example for solaris-x86-cc, and that leads to build errors.
The better solution is to have configure detect if the lower level
padlock routines are being built, and define the macro PADLOCK_ASM if
they are, and use that macro in our C code.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1510)
Very simply, support having the .a extension to denote depending on
static libraries. Note that this is not supported on native Windows
when building shared libraries, as there is not static library then,
just an import library with the same name.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)
Also we disable TLS1.3 by default (use enable-tls1_3 to re-enable). This is
because this is a WIP and will not be interoperable with any other TLS1.3
implementation.
Finally, we fix some tests that started failing when TLS1.3 was disabled by
default.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The number is taken from the OPENSSL_VERSION_NUMBER which is already
in the hex form.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1706)
Make Configure recognise -rpath and -R to support user added rpaths
for OSF1 and Solaris. For convenience, add a variable LIBRPATH in the
Unix Makefile, which the users can use as follows:
./config [options] -Wl,-rpath,\$(LIBRPATH)
Reviewed-by: Rich Salz <rsalz@openssl.org>
A note: this will form object file names by changing '.cc' to
'_cc.o'. This will permit other configuration code to recognise these
object files were built for C++ rather than C.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In an earlier attempt to simplify the processing of disabled options,
'no-err' and 'no-async' stopped working properly. 'err' and 'async'
are directories under 'crypto/', but they are special insofar that
they can't be simply skipped, like all the algorithm directories can,
so they need special treatment among the disablable things.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Traditionally Configure passed $ENV{PERL} to Makefile. But this
resulted in ambiguilty as Configure script could be executed by
interpreter different from one executing remaining scripts. Since
we separate compile- and run-time interpreters with HASHBANGPERL
variable, there is no reason to segment the build procedure.
Reviewed-by: Rich Salz <rsalz@openssl.org>
With extensive help and feedback from Richard and Andy.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath. Unfortunately, this doesn't work
too well with asan, msan or ubsan.
So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.
This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The way we figured out what options are crypto algorithms and what are
something other was somewhat sketchy. This change bases the
distinction on available sdirs instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Because some targets execute perl code that might die, we risk
incomplete lists. Make it so dying doesn't happen when we're listing
targets.
Reviewed-by: Rich Salz <rsalz@openssl.org>
These tests take a very long time on some platforms, and arent't
always strictly necessary. This makes it possible to turn them
off. The necessary binaries are still built, though, in case
someone still wants to do a manual run.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Note: some shells do not like the command verb to be quoted, so we avoid
it unless it's actually necessary.
RT#4665
Reviewed-by: Rich Salz <rsalz@openssl.org>
Build file templates would be looked up like this if the user gave us
an additional directory to look for configuration files and build file
templates:
$OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
$SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
$OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
$SOURCEDIR/Configurations/Makefile.tmpl
So for example, if the user created his own Makefile.tmpl and tried to
use it with a unixly config, it would never be user because we have a
unix-Makefile.tmpl in our Configurations directory. This is clearly
wrong, and this change makes it look in this order instead:
$OPENSSL_LOCAL_CONFIG_DIR/$OSTYPE-Makefile.tmpl
$OPENSSL_LOCAL_CONFIG_DIR/Makefile.tmpl
$SOURCEDIR/Configurations/$OSTYPE-Makefile.tmpl
$SOURCEDIR/Configurations/Makefile.tmpl
Reviewed-by: Rich Salz <rsalz@openssl.org>
The definition of STITCHED_CALL relies on OPENSSL_NO_ASM. However,
when a configuration simply lacks the assembler implementation for RC4
(which is where we have implemented the stitched call), OPENSSL_NO_ASM
isn't implemented. Better, then, to rely on specific macros that
indicated that RC4 (and MD5) are implemented in assembler.
For this to work properly, we must also make sure Configure adds the
definition of RC4_ASM among the C flags.
Reviewed-by: Andy Polyakov <appro@openssl.org>
@disablables is sorted, but these were just added at the end of
%disabled in commits c2e27310 and 22e3dcb7.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
PROGRAM_NO_INST, ENGINES_NO_INST, SCRIPTS_NO_INST and LIBS_NO_INST are
to be used to specify program, engines, scripts and libraries that are
not to be installed in the system. Fuzzers, test programs, that sort
of things are of the _NO_INST type, for example.
For the benefit of build file templates and other templates that use
data from configdata.pm, a new hash table $unified_info{install} is
created. It contains a set of subhashes, one for each type of
installable, each having an array of file names as values. For
example, it can look like this:
"install" =>
{
"engines" =>
[
"engines/afalg/afalg",
"engines/capi",
"engines/dasync",
"engines/padlock",
],
"libraries" =>
[
"libcrypto",
"libssl",
],
"programs" =>
[
"apps/openssl",
],
"scripts" =>
[
"apps/CA.pl",
"apps/tsget",
"tools/c_rehash",
],
},
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of having fuzz/build.info.fuzz magically and conditionally
included along with the other build.info files, incorporate it in
fuzz/build.info and add the conditions there instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Make it possible to have a separate and different perl command string
for installable scripts than we use when building, with the
environment variable HASHBANGPERL. Its value default to the same as
the environment PERL if it's defined, otherwise '/usr/bin/env perl'.
Note: this is only relevant for Unix-like environments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
INCLUDE statements in build.info files were source tree centric. That
meant that to get include directory specs in the build tree, we had to
resort to perl fragments that specified the build tree include paths
as absolute ones.
This change has the INCLUDE statement consider both the source and
build tree for any include directory. It means that there may be some
extra unnecessary include paths, but it also makes life simpler for
anyone who makes changes in the build.info files.
Reviewed-by: Rich Salz <rsalz@openssl.org>
mkdef.pl was failing to understand no-ripemd. This is a deprecated option
which should act as an alias for no-rmd160.
Reviewed-by: Richard Levitte <levitte@openssl.org>
'DEPEND[]=file.h' becomes a special way to say that 'file.h' must be
generated before anything else is built. It's likely that a number
of source files depend on these header files, this provides a simple
way to make sure they are always generated even it the dependency data
hasn't been added to the build file yet.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add copyright to missing assembler files.
Add copyrights to missing test/* files.
Add copyrights
Various source and misc files.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Trying to use normal perl conditions to conditionally 'use' a perl
module didn't quite work. Using the 'if' module to do so does work.
Reviewed-by: Andy Polyakov <appro@openssl.org>
As it turns out default glob's behaviour for quoted argument varies
from version to version, making it impossible to Configure or run
tests in some cases. The reason for quoting globs was to accommodate
source path with spaces in its name, which was treated by default glob
as multiple paths. File::Glob::glob on the other hand doesn't consider
spaces as delimiters and therefore works with unquoted patterns.
[Unfortunaltely File::Glob::glob, being too csh-ly, doesn't work
on VMS, hence the "pinning" is conditional.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
At earlier point 'which' was replaced with IPC::Cmd::can_run call.
Unfortunately on RPM-based systems it is a separate package and it's
not given that it's installed. Resurrected 'which' provides
poor-man fallback for IPC::Cmd::can_run.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
As it was until now, crypto-mdebug-backtrace was enabled by default
and only disabled if crypto-mdebug was disabled.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add Configure generated header files to $unified_info{generate}. This
makes sure the build files will pick them up with the rest for the
GENERATED macro, and thereby make sure they get cleaned away by 'make
clean'
Reviewed-by: Rich Salz <rsalz@openssl.org>
The buf-freelists option was removed in master. There may be some
things that try to disable it, so don't error out.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
