Move manpages to manX directories
Add Windows/VMS install fix from Richard Levitte
Update README
Fix typo's
Remove some duplicates
Reviewed-by: Richard Levitte <levitte@openssl.org>
Make Configure recognise -rpath and -R to support user added rpaths
for OSF1 and Solaris. For convenience, add a variable LIBRPATH in the
Unix Makefile, which the users can use as follows:
./config [options] -Wl,-rpath,\$(LIBRPATH)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Before OpenSSL 1.1.0, binaries were installed in a non-standard
location by default, and runpath directories were therefore added in
those binaries, to make sure the executables would be able to find the
shared libraries they were linked with.
With OpenSSL 1.1.0 and on, binaries are installed in standard
directories by default, and the addition of runpath directories is
therefore not needed any more.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Note that it relies on a trick from Configure, where file names for
object files made from C++ source get '.cc' replaced with '_cc.o' to
recognise them. This is needed so the correct compiler is used when
linking binaries.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath. Unfortunately, this doesn't work
too well with asan, msan or ubsan.
So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.
This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In the case of using an independent makedepend, we had split that into
two separate recipes, one depending on the other. However, there are
cases where the makedepend recipe was always trying, but doesn't
update the time stamp of the .d file because there are no actual
changes, and thereby causing constant updates of the object files.
This change makes one recipe that takes care of both makedepend och
cc, thereby avoiding these extra updates.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Instead, install the new one as openssl.cnf.dist (openssl.cnf-dist on
VMS), and only install it as openssl.cnf if that file doesn't already
exist.
Also, don't install with exec privileges on VMS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
On non-Windows platforms, shared libraries are both development and
runtime files. We only installed them as development files, this
makes sure they get installed as runtime files as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This adds a new target 'build_programs' and makes 'build_apps' and
'build_tests' aliases for it, for backward compatibility.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is only done for the platforms where 'OPENSSL_USE_APPLINK' is defined.
Also, change the docs of OPENSSL_Applink to say where to find applink.c
in the installation directory.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some Unix variants require shared libraries to have the execute
permissions set, or they won't be loadable or executable when loaded.
Among others, cygwin has this requirement.
Reviewed-by: Matt Caswell <matt@openssl.org>
OpenSSL engines are tied to the OpenSSL shared library versions,
starting with OpenSSL 1.1. We therefore need to install them in
directories which have the shared library version in it's name, to
easily allow multiple OpenSSL versions to be installed at the same
time.
For Unix, the default installation directory is changed from
$PREFIX/lib/engines to $PREFIX/lib/engines-${major}_${minor} (mingw)
or $PREFIX/lib/engines-${major}.${minor} (all but mingw)
($PREFIX is the directory given for the configuration option --prefix,
and ${major} and ${minor} are the major and minor shared library
version numbers)
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is just in case someone passed an inclusion path with the
configuration, and there are OpenSSL headers from another version
in there.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Since corresponding rule was removed from windows-makefile.tmpl out
of necessity, question popped if it's appropriate to harmonize even
unix-Makefile.tmpl. Note that as long as you work on single directory
'make lib<rary>.a' is effectively equivalent to 'make <dir/ectory>'
prior this modification.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
- User targets are now the same and generally do the same things
- configdata.pm depends on exactly the same files on all platforms
- VMS production of shared libraries is simplified
- VMS automatic dependency files get the extension .D rather than .MMS
Reviewed-by: Rich Salz <rsalz@openssl.org>
Previous build scheme allowed building just the stuff in one
subdirectory, like this:
make -C crypto/aes
Because the unified only has a top-level Makefile, this is not
possible with it. This change adds a replacement where each directory
we have something to build in becomes a target in its own right,
allowing building something like this:
make crypto/aes
The exception is the directory test, because we already have such a
target.
Reviewed-by: Stephen Henson <steve@openssl.org>
Someone wants to configure like this:
PERL="/usr/bin/env perl" ./config
The end goal is to get that in the #! line of CA.pl and a few other
scripts. That works well already, but in the Makefile, there were a
few lines looking like this:
PERL=$(PERL) $(PERL) whatever.pl ...
Those need some quoting.
RT#4311
Reviewed-by: Matt Caswell <matt@openssl.org>
Add Configure generated header files to $unified_info{generate}. This
makes sure the build files will pick them up with the rest for the
GENERATED macro, and thereby make sure they get cleaned away by 'make
clean'
Reviewed-by: Rich Salz <rsalz@openssl.org>
Some setups use links inside .git directory and make clean should not
remove them to avoid breaking git meta-information.
Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
CLA: none; trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1078)
Some non-Gnu compilers interpret -E -P combination differently.
some prioritize -E over -P, others -P over -E (in which case .i
file is generated and sometimes truncated because of redirection).
Reviewed-by: Richard Levitte <levitte@openssl.org>
In the case of generating a file like this:
GENERATE[foo.S]=mkfoo.pl arg1 arg2
the 'mkfoo.pl' generator itself might need to include other files,
such as perl modules within our source tree. We can reuse already
existing syntax for it, like this:
INCLUDE[mkfoo.pl]=module/path
or:
DEPEND[mkfoo.pl]=modules/mymodule.pm
This change implements the support for such constructs, and for the
DEPEND statement, for any value that indicates a perl module (.pm
file), it will automatically infer an INCLUDE statement for its
directory, just like it does for C header files, so you won't have do
write this:
DEPEND[mkfoo.pl]=modules/mymodule.pm
INCLUDE[mkfoo.pl]=modules
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Because we have a directory 'test', the target 'test' may be confusing
to make. However, if we make it depend on 'tests', which doesn't
exist, make should never fail to run the actions.
Reviewed-by: Andy Polyakov <appro@openssl.org>
no-stdio does not work with the apps. Since the tests also need the apps
it doesn't support that either. Therefore we disable building of both.
no-autoalginit is not compatible with the apps because it requires explicit
loading of the algorithms, and the apps don't do that. Therefore we disable
building the apps for this option. Similarly the tests depend on the apps
so we also disable the tests. Finally the whole point about no-autoalginit
is to avoid excessive executable sizes when doing static linking. Therefore
we disable "shared" if this option is selected.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The handling was Unix centric, already in Configure. Change that to
just collect the value and let the build file templates figure out
what to do with it.
Reviewed-by: Matt Caswell <matt@openssl.org>
We used to symlink generate_ssl_tests.pl to the build directory.
Now that the build scripts look for sources in both directories, this
is no longer necessary (see commit
fbd361eaf8).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Currently, SSL tests are configured via command-line switches to
ssltest.c. This results in a lot of duplication between ssltest.c and
apps, and a complex setup. ssltest.c is also simply old and needs
maintenance.
Instead, we already have a way to configure SSL servers and clients, so
we leverage that. SSL tests can now be configured from a configuration
file. Test servers and clients are configured using the standard
ssl_conf module. Additional test settings are configured via a test
configuration.
Moreover, since the CONF language involves unnecessary boilerplate, the
test conf itself is generated from a shorter Perl syntax.
The generated testcase files are checked in to the repo to make
it easier to verify that the intended test cases are in fact run; and to
simplify debugging failures.
To demonstrate the approach, min/max protocol tests are converted to the
new format. This change also fixes MinProtocol and MaxProtocol
handling. It was previously requested that an SSL_CTX have both the
server and client flags set for these commands; this clearly can never work.
Guide to this PR:
- test/ssl_test.c - test framework
- test/ssl_test_ctx.* - test configuration structure
- test/handshake_helper.* - new SSL test handshaking code
- test/ssl-tests/ - test configurations
- test/generate_ssl_tests.pl - script for generating CONF-style test
configurations from perl inputs
Reviewed-by: Richard Levitte <levitte@openssl.org>
Previously, we updated the static libraries (libcrypto.a on Unix,
libcrypto.lib on Windows) with all the object files, regardless of if
they were rebuilt or not. With this change, we only update them with
the object files were rebuilt.
NOTE: this does not apply on VMS, as the expansion of $? may be too
large for a command line.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The logic to find out of there are any .d files newer than Makefile is
sound. Checking the result was less so.
Reviewed-by: Rich Salz <rsalz@openssl.org>
- In Configure, register the perl interpreter used to run Configure,
so that's the one being used throughout instead of something else
that Configure happens to find. This is helpful for using a perl
version that's not necessarely first in $PATH:
/opt/perl/5.22.1/bin/perl ./Configure
- Make apps/tsget a generated file, just like apps/CA.pl, so the
perl interpreter registered by Configure becomes the hashbang path
instead of a hardcoded /usr/bin/perl
Reviewed-by: Andy Polyakov <appro@openssl.org>
In constructions such as 'for x in $(MAKEVAR); do ...', there's the
possibility that $(MAKEVAR) is en empty value. Some shells don't like
that, so introduce a dummy value that gets discarded:
for x in dummy $(MAKEVAR); do
if [ "$$x" = "dummy" ]; then continue; fi
Closes RT#4459
Reviewed-by: Rich Salz <rsalz@openssl.org>
One of the 'generate' targets depended on $(SRCDIR)/apps/progs.h,
which depended on... nothing. This meant it never got regenerated
once it existed, regardless of need. Of course, we could have it
depend on all the files checked to generate it, but they also depend
on progs.h, so we'd end up getting cricular dependencies, which makes
make unhappy.
Furthermore, and this applies for the other generated files, having
them as targets means that they may be regenerated on the fly in some
cases, and since they get written to the source tree, this isn't such
a good idea if that tree is read-only (which is a possible situation
in an out-of-tree build).
So, we move all the actions to the 'generate' targets themselves, thus
making sure they get regenerated in a controlled manner and regardless
of dependencies.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Some implementations of sed require a newline before an ending '}'.
The easier method is to replace that sed command with the
corresponding perl command.
Closes RT#4448
Reviewed-by: Rich Salz <rsalz@openssl.org>
Depending on what has been built so far, all .d files may not be
present and 'find' will exit with non-zero exit code. This isn't a
bother for us but may break make, so clear the exit code with an added
'exit 0'.
Closes RT#4444
Reviewed-by: Rich Salz <rsalz@openssl.org>
generatesrc() did already receive dependency information, but never
used it, and never really needed to... until now.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of relying on the '-nt' test operator, which doesn't exist
everywhere, use find's '-newer' to find out if any of the known .d
files is newer than Makefile.
Closes RT#4444
Reviewed-by: Andy Polyakov <appro@openssl.org>
In most builds, we can assume that engines live in the build tree
subdirectory "engines". This was hard coded into the tests that use
the engine ossltest.
However, that hard coding is tedious, it would need to be done in
every test recipe, and it's an incorrect assumption in some cases.
This change has us play it safe and let the build files tell the
testing framework where the engines are.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Normally we always refer to source files relative to $SRCDIR in Makefiles.
However the reference to unix-Makefile.tmpl was using a fully expanded
absolute path. This can cause problems for Mingw.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In unix-Makefile.tmpl, this construction has been used a few times
if ! something; then ...
It seems, though, that some shells do not understand !, so these need
to be changed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When passing down values to Makefile.shared, do so with single quotes
as much as possible to avoid having the shell create a mess of quotes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The variable SHARED_CFLAGS and SHARD_LDFLAGS were used in the Unix
template because they normally contain options used when building
"shared". The Windows template, on the other hand, uses LIB_CFLAGS,
to express the intended use of those flags rather than their content.
The Windows template still used SHARED_LDFLAGS, which seems
inconsistent.
To harmonize the two, any SHARED_CFLAGS gets renamed to LIB_CFLAGS and
SHARED_LDFLAGS to LIB_LDFLAGS. That makes the intent consistent along
with BIN_{C,LD}FLAGS and DSO_{C,LD}FLAGS.
Finally, make sure to pass down $(LIB_CFLAGS) or $(DSO_CFLAGS) along
with $(CFLAGS) when using Makefile.shared.
Reviewed-by: Rich Salz <rsalz@openssl.org>
It turns out that different sed implementations treat -i differently
to cause issues. make it simpler by avoiding it entirely and give
perl the trust to be consistent enough.
Reviewed-by: Rich Salz <rsalz@openssl.org>
If pre-processor failed, an empty .s file could be left behind,
which could get successfully compiled if one simply re-ran make
and cause linking failures. Not anymore. Remove even intermediate .S
in case of pre-processor failure.
Reviewed-by: Richard Levitte <levitte@openssl.org>
One of them didn't clean away .d.tmp files properly.
The other would overwrite the .d files unconditionally, thereby
causing a possibly unnecessary dependency rebuild, which touches the
date of Makefile, which causes a possibly unnecessary rebuild of
buildinf.h and everything that depends on that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
The source file generators sometimes use $(CC) to post-process
generated source, and getting the inclusion directories may be
necessary at times, so we pass them down.
RT#4406
Reviewed-by: Rich Salz <rsalz@openssl.org>
This change is a bit more complex, as it involves several recipe
variants.
Also, remove the $(CROSS_COMPILE) prefix for the makedepend program.
When we use the program "makedepend", this doesn't serve anything,
and when we use the compiler, this value isn't even used.
Reviewed-by: Rich Salz <rsalz@openssl.org>
For assembler, we want the final target to be foo.s (lowercase s).
However, the build.info may have lines like this (note upper case S):
GENERATE[foo.S]=foo.pl
This indicates that foo.s (lowercase s) is still to be produced, but
that producing it will take an extra step via $(CC) -E. Therefore,
the following variants (simplified for display) can be generated:
GENERATE[foo.S]=foo.pl => foo.s: foo.pl
$(PERL) $foo.pl $@.S; \
$(CC) $(CFLAGS) -E -P $@.S > $@ && \
rm -f $@.S
GENERATE[foo.s]=foo.pl => foo.s: foo.pl
$(PERL) $foo.pl $@
GENERATE[foo.S]=foo.m4 => foo.s: foo.m4
m4 -B 8192 $foo.m4 > $@.S; \
$(CC) $(CFLAGS) -E -P $@.S > $@ && \
rm -f $@.S
GENERATE[foo.s]=foo.m4 => foo.s: foo.m4
m4 -B 8192 $foo.m4 > $@
Reviewed-by: Andy Polyakov <appro@openssl.org>
For config targets such as 'dist', which doesn't have a BASE template,
we still need to have a default build scheme.
Additionally, the unified Makefile template's target 'tar' wasn't
quite as flexible as the unixmake one.
Finally, .travis-create-release.sh can be somewhat simplified now that
it builds with the unified build scheme.
Reviewed-by: Matt Caswell <matt@openssl.org>
We copied $target{cflags}, $target{defines} and a few more to %config,
just to add to the entries. Avoid doing so, and let the build templates
deal with combining the two.
There are a few cases where we still fiddle with %target, but that's
acceptable.
Reviewed-by: Andy Polyakov <appro@openssl.org>
When building with GNU C, clang or VMS C, it's more efficient to
generate dependency file and object file in one call rather than two.
Have the dependency output in a temporary file and compare it with the
previous one if available to see if replacement is waranted, thereby
avoiding unnecessary reconstruction of Makefile / descrip.mms.
Github issue #750
Reviewed-by: Rich Salz <rsalz@openssl.org>
I read the PROBLEMS, and they're outdated; nothing I'd put in the
online FAQ, for example. Test-builds work without using these files.
Had to remove the rehash.time stuff from Makefile.in
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the local system doesn't have GNU C or clang, and not even
makedepend, the build will stop because the call of 'makedepend'
fails. This changes so the build won't stop because of such failure.
The result will be empty .d files, and that's ok.
Reviewed-by: Rich Salz <rsalz@openssl.org>
GNU make will re-exec if (it thinks that) the Makefile has changed.
Just having the target Makefile seems to make it think it has, so we
end up in a look where GNU make re-execs for ever.
The fix is easy, just remove the Makefile target and have the depend
target run the recipe on its own instead of depending on Makefile.
Reviewed-by: Rich Salz <rsalz@openssl.org>
