cryptilib.h is the second.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4188)
Remove GETPID_IS_MEANINGLESS and osslargused.
Move socket-related things to new file internal/sockets.h; this is now
only needed by four(!!!) files. Compiles should be a bit faster.
Remove USE_SOCKETS ifdef's
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4209)
return true for characters > 127. I.e. they are allowing extended ASCII
characters through which then cause problems. E.g. marking superscript '2' as
a number then causes the common (ch - '0') conversion to number to fail
miserably. Likewise letters with diacritical marks can also cause problems.
If a non-ASCII character set is being used (currently only EBCDIC), it is
adjusted for.
The implementation uses a single table with a bit for each of the defined
classes. These functions accept an int argument and fail for
values out of range or for characters outside of the ASCII set. They will
work for both signed and unsigned character inputs.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4102)
Add length limits to avoid problems with sprintf, strcpy and strcat. This replaces recently removed code but also guards some previously missing function calls (for DOS & Windows).
Reworked the BIO_dump_indent_cb code to reduce temporary storage.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3870)
[extended tests]
Original text:
Use BUF_strlcpy() instead of strcpy().
Use BUF_strlcat() instead of strcat().
Use BIO_snprintf() instead of sprintf().
In some cases, keep better track of buffer lengths.
This is part of a large change submitted by Markus Friedl <markus@openbsd.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3701)
The value of BIO_CTRL_DGRAM_SET_PEEK_MODE was clashing with the value for
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE. In an SCTP enabled build
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE was used unconditionally with
the reasoning that it would be ignored if SCTP wasn't in use. Unfortunately
due to this clash, this wasn't the case. The BIO ended up going into peek
mode and was continually reading the same data over and over - throwing it
away as a replay.
Fixes#3723
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3724)
Run perltidy on util/mkerr
Change some mkerr flags, write some doc comments
Make generated tables "const" when genearting lib-internal ones.
Add "state" file for mkerr
Renerate error tables and headers
Rationalize declaration of ERR_load_XXX_strings
Fix out-of-tree build
Add -static; sort flags/vars for options.
Also tweak code output
Moved engines/afalg to engines (from master)
Use -static flag
Standard engine #include's of errors
Don't linewrap err string tables unless necessary
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3392)
BIO_socket_ioctl is only implemented on VMS for VMS version 7.0 and
up, but since we only support version 7.1 and up, there's no need to
check the VMS version.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3448)
- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)
Bug found and fix suggested by Julian Rüth.
Push error if fflush fails
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3266)
In SCTP the code was only allowing a send of a close_notify alert if the
socket is dry. If the socket isn't dry then it was attempting to save away
the close_notify alert to resend later when it is dry and then it returned
success. However because the application then thinks that the close_notify
alert has been successfully sent it never re-enters the DTLS code to
actually resend the alert. A much simpler solution is to just fail with a
retryable error in the event that the socket isn't dry. That way the
application knows to retry sending the close_notify alert.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
In order to use SCTP over DTLS we need ACTP AUTH chunks to be enabled in
the kernel.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
The existing BIO_lookup() wraps a call to getaddrinfo and provides an
abstracted capability to lookup addresses based on socket type and family.
However it provides no ability to lookup based on protocol. Normally,
when dealing with TCP/UDP this is not required. However getaddrinfo (at
least on linux) never returns SCTP addresses unless you specifically ask
for them in the protocol field. Therefore BIO_lookup_ex() is added which
provides the protocol field.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3286)
Originally there was dependency on BN configuration parameters, but
it stemmed from times when "long long" support was optional. Today
we require 64-bit support from compiler, and there is no reason to
have "greatest-width integer" depend on BN configuration.
Reviewed-by: Richard Levitte <levitte@openssl.org>
'j' is specified as modifier for "greatest-width integer type", which in
practice means 64 bits on both 32- and 64-bit platforms. Since we rely
on __attribute__((__format__(__printf__,...))) to sanitize BIO_print
format, we can use it to denote [u]int64_t-s in platform-neutral manner.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3083)
Fix some comments too
[skip ci]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)
Private hstrerror was introduced to address linking problem on HP-UX,
but truth be told conemporary systems, HP-UX included, wouldn't come
to that call, they would use getaddrinfo and gai_strerror, while
gethostbyname and h_errno are there to serve legacy systems. Since
legacy systems are naturally disappearing breed, we can as well just
let user interpret number.
GH#2816
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
After the recent reworking, not everything matched up, and some
comments didn't catch up to the outl-->dlen and inl-->dlen renames
that happened during the development of the recent patches.
Try to make parameter names consistent across header, implementation,
and manual pages.
Also remove some trailing whitespace that was inadvertently introduced.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1798)
In converting a new style BIO_read() call into an old one, read
as much data as we can (INT_MAX), if the size of the buffer is
>INT_MAX.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Certain functions are automatically called during auto-deinit in order
to deallocate resources. However, if we have never entered a function which
marks lib crypto as inited then they never get called. This can happen if
the user only ever makes use of a small sub-set of functions that don't hit
the auto-init code.
This commit ensures all such resources deallocated by these functions also
init libcrypto when they are initially allocated.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
The declaration of bio_type_lock is independent of no-sock so should not be
inside OPENSSL_NO_SOCK guards.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Commit 417be66 broken BIO_new_accept() by changing the definition of the
macro BIO_set_accept_port() which stopped acpt_ctrl() from calling
BIO_parse_hostserv(). This commit completes the series of changes
initiated in 417be66.
Updated pods to reflect new definition introduced by 417be66.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1386)
extra spacing and 80 cols
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1366)
Simplify BIO init using OPENSSL_zalloc().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1261)
llvm's ubsan reported:
runtime error: negation of -9223372036854775808 cannot be represented in type
'long'; cast to an unsigned type to negate this value to itself
Found using afl
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1325
Fix some indentation at the same time
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1292)
"configured on the local system". Whatever that means. Example that is biting
me is loopback has ::1 as an address, but the network interface is v4 only.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the string to print is exactly 2048 character long (excluding the NULL
terminator) then BIO_printf will chop off the last byte. This is because
it has filled its static buffer but hasn't yet allocated a dynamic buffer.
In cases where we don't have a dynamic buffer we need to truncate but that
is not the case for BIO_printf(). We need to check whether we are able to
have a dynamic buffer buffer deciding to truncate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/997)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/997)
- If we have a maximum amount of characters permitted to be printed
(for example "%.2s", which allows for a maximum of 2 chars), we
minimize the number of characters from the string to printed to
that size.
- If there is space for padding and there is a maximum amount of
characters to print (for example "%3.2s", which shall give at
least a 1 space padding), the amount of characters to pad with
gets added to the maximum so the minimum field size (3 in this
example) gets filled out.
Reviewed-by: Matt Caswell <matt@openssl.org>
We convert the integer part of the float to a long. We should check it
fits first.
Issue reported by Guido Vranken.
GitHub Issue #1102
Reviewed-by: Richard Levitte <levitte@openssl.org>
The previous commit which "fixed" the "e" and "g" floating point formats
just printed them in the same way as "f". This is wrong. This commit
provides the correct formatting.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Convert assert to OPENSSL_assert(), add some documentation, add the calls
to fmtfp() for the "e" and "g" floating point formats which were missing.
Based on a patch provided by Ger Hobbelt <ger@hobbelt.com>.
RT#2270
Reviewed-by: Richard Levitte <levitte@openssl.org>
* Configure: Replaced -DTERMIO by -DTERMIOS in CFLAGS.
* crypto/bio/bss_dgram.c [WATT32]: Remove obsolete redefinition of
function names: sock_write, sock_read and sock_puts.
* crypto/bio/bss_sock.c [WATT32]: For Watt-32 2.2.11 sock_write,
sock_read and sock_puts are redefined to their private names so
their names must be undefined first before they can be redefined
again.
* crypto/bio/bss_file.c (file_fopen) [__DJGPP__]: Make a copy of the
passed file name and replace the leading dots in the dirname part
and the basname part of the file name, unless LFN is supported.
* e_os.h [__DJGPP__]: Undefine macro DEVRANDOM_EGD. Neither MS-DOS nor
FreeDOS provide 'egd' sockets.
New macro HAS_LFN_SUPPORT checks if underlying file system supports
long file names or not.
Include sys/un.h.
Define WATT32_NO_OLDIES.
* INSTALL.DJGPP: Update URL of WATT-32 library.
Submitted by Juan Manuel Guerrero <juan.guerrero@gmx.de>
RT#4217
Reviewed-by: Andy Polyakov <appro@openssl.org>
BIO_eof() was always returning true when using a BIO pair. It should only
be true if the peer BIO is empty and has been shutdown.
RT#1215
Reviewed-by: Richard Levitte <levitte@openssl.org>
- Missing checks for allocation failure.
- releasing memory in few missing error paths
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The old BIO_accept() function can encounter errors during malloc. We need
to ensure we properly clean up if that occurs.
GH Issue #817
Reviewed-by: Richard Levitte <levitte@openssl.org>
The code that implements this control would work when enabling nbio,
but the disabling code needed fixing.
Reviewed-by: Matt Caswell <matt@openssl.org>
During construction of a mem BIO we allocate some resources. If this
allocation fails we can end up leaking everything we have allocated so
far.
Reviewed-by: Richard Levitte <levitte@openssl.org>
When setting an accepted socket for non-blocking, if the operation fails
make sure we close the accepted socket.
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_sock_error() returned 1 when getsockopt() fails when it should
return the error code for that failure.
Additionally, the optlen parameter to getsockopt() has to point at
the size of the area that the optval parameter points at rather than
zero. Some systems may forgive it being zero, but others don't.
Reviewed-by: Matt Caswell <matt@openssl.org>
The Unix build was the last to retain the classic build scheme. The
new unified scheme has matured enough, even though some details may
need polishing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Travis identified a problem with freeing the ex_data locks which wasn't
quite right in ff2344052. Trying to fix it identified a further problem:
the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called
explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to
CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data
lock already freed.
Reviewed-by: Tim Hudson <tjh@openssl.org>
There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
BIO_sock_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
When a file is opened with BIO_new_file(), make sure that the internal
mode TEXT vs BINARY setting reflects what's given in the mode string.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Since NDEBUG is defined unconditionally on command line for release
builds, we can omit *_DEBUG options in favour of effective "all-on"
in debug builds exercised though CI.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
