We also add this to our x86_64 builds on appveyor
(cherry picked from commit b4a7b4ec4acc712b1f22a83966ac986b510f25d8)
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10365)
The `./pyca-cryptography/.travis/downstream.d` subdirectory that causes the `rm` command to fail (albeit harmlessly, but with a warning from `make` nonetheless).
>rm -f `find . -name '*.d' \! -name '.*' -print`
>rm: cannot remove './pyca-cryptography/.travis/downstream.d': Is a directory
>make: [Makefile:1910: clean] Error 1 (ignored)
Exclude directories from being matched by the `find` commands.
CLA: trivial
Reviewed-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/10264)
(cherry picked from commit 38b71bd4704ee1746e862f5a7a4e170fd84a5eb0)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9681)
This leaves VPAES and AESNI support.
The VPAES performance is comparable but BSAES is not
completely constant time. There are table lookups
using secret key data in AES_set_encrypt/decrypt_key
and in ctr mode short data uses the non-constant
time AES_encrypt function instead of bit-slicing.
Furthermore the AES_ASM is by far outperformed
by recent GCC versions.
Since BSAES calls back to AES_ASM for short
data blocks the performance on those is also
worse than the pure software implementaion.
Fixes: #9640
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9675)
A local 'make clean' did some sweeping removals of files execpt for
the .git directory. This is a little too sweeping, as other dotted
files might be cleaned away if they happen to match the pattern that's
searched for.
An example is a symlink .dir-locals.el that would keep disappearing if
you build in the source tree and do a make clean...
So we change this to leave all dotted files alone. Our builds do not
produce such files anyway, so this is a harmless (or rather, less
harmful) change.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9573)
(cherry picked from commit 853094dbe1)
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9295)
Mingw config targets assumed that resulting programs and libraries are
installed in a Unix-like environment and the default installation
prefix was therefore set to '/usr/local'.
However, mingw programs are installed in a Windows environment, and
the installation directories should therefore have Windows defaults,
i.e. the same kind of defaults as the VC config targets.
A difficulty is, however, that a "cross compiled" build can't figure
out the system defaults from environment the same way it's done when
building "natively", so we have to fall back to hard coded defaults in
that case.
Tests can still be performed when cross compiled on a non-Windows
platform, since all tests only depend on the source and build
directory, and otherwise relies on normal local paths.
CVE-2019-1552
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9400)
The DEBUG_SAFESTACK preprocessor define is obsolete since 2008
when the non-safestack code was removed by commit 985de86340.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9070)
(cherry picked from commit d4f63f1c39)
We add the extra warning and sanitizer options to check our code,
which is entirely in C. We support C++ compilers uniquely for the
sake of certain external test suites, and those projects can probably
sanitize their own code themselves.
[extended tests]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9013)
(cherry picked from commit 3b437400d9)
- Allow user-defined RCFLAGS
- Pass RCFLAGS to RC
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8803)
(cherry picked from commit a583172dac)
The AIX binder needs to be instructed that the output will have no entry
point (see AIX' ld manual: -e in the Flags section; autoexp and noentry
in the Binder section).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8282)
(cherry picked from commit c1b3846242)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Backport-of: https://github.com/openssl/openssl/pull/8092
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8134)
VMS doesn't currently support unloading of shared object, and we need
to reflect that. Without this, the shlibload test fails
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8131)
(cherry picked from commit d1dd5d6f4c)
It apepars that ANDROID_NDK_HOME is the recommended standard
environment variable for the NDK.
We retain ANDROID_NDK as a fallback.
Fixes#8101
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8103)
(cherry picked from commit 6e826c471b)
It turned out that .S files aren't to be treated as lightly as I
thought. They need to go through a preprocessing step, which .s files
don't need to.
Corrects #7703
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7889)
(cherry picked from commit e436664828)
It's being replaced with constant-time alternative.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7589)
(cherry picked from commit b34446cca2)
We only convert lowercase .s to .asm, that turned out not to be sufficient.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7703)
(cherry picked from commit c739e676eb)
Mingw and Cygwin builds install the DLLs in the application directory,
not the library directory, so ensure that one is created for them when
installing the DLLs.
Fixes#7653
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7654)
(cherry picked from commit 9694ebf753)
We only had the main 'install' target depend on 'all'. This changes
the dependencies so targets like install_dev, install_runtime_libs,
install_engines and install_programs depend on build targets that are
correspond to them more specifically. This increases the parallel
possibilities.
Fixes#7466
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)
(cherry picked from commit e8d01a6087)
When trying 'make -j{n} install', you may occasionally run into
trouble because to sub-targets (install_dev and install_runtime) try
to install the same shared libraries. That makes parallel install
difficult.
This is solved by dividing install_runtime into two parts, one for
libraries and one for programs, and have install_dev depend on
install_runtime_libs instead of installing the shared runtime
libraries itself.
Fixes#7466
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)
(cherry picked from commit c1123d9f7e)
This makes sure that any resulting directory target in the build files
also depend on object files meant for shared libraries.
As a side effect, we move the production of the dirinfo structure from
common.tmpl to Configure, to make it easier to check the result.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7452)
(cherry picked from commit b6e660754c)
This excluses user from additional PATH adjustments in case NDK has
llvm-ar.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7443)
(cherry picked from commit ddf2e8c8cc)
03ad7c009e failed if one didn't pass
explicit -D__ANDROID_API__=N :-(
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7443)
(cherry picked from commit 71f2b3171e)
We made the build of foo.obj depend on foo.d, meaning the latter gets
built first. Unfortunately, the way the compiler works, we are forced
to redirect all output to foo.d, meaning that if the source contains
an error, the build fails without showing those errors.
We therefore remove the dependency and force the build of foo.d to
always happen after build of foo.obj.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7469)
(cherry picked from commit ecc347f5f5)
This also gave enough reason to collect the stuff that's common for
all iOS config targets into the template "ios-common".
Fixes#7318
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7403)
(cherry picked from commit 04e3f9a114)
When building shared libraries on Windows, we had a clash between
'libcrypto.lib' the static routine library and 'libcrypto.lib' the
import library.
We now change it so the static versions of our libraries get '_static'
appended to their names. These will never get installed, but can
still be used for our internal purposes, such as internal tests.
When building non-shared, the renaming mechanism doesn't come into
play. In that case, the static libraries 'libcrypto.lib' and
'libssl.lib' are installed, just as always.
Fixes#7492
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7496)
(cherry picked from commit b3023ced6b)
We only had targets for the "simple" shared library names (libfoo.so
and not libfoo.so.x.y on Unix, import library libfoo.lib but not
libfoo.dll on Windows). This has created some confusion why it wasn't
possible to rebuild the less "simple" name directly (just as an
example, someone who mistook the import library on Windows for a
static library, removed the DLL and then found it was difficult to
rebuild directly), so we change the target to include all possible
names.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7451)
(cherry picked from commit d8cac50b02)
When looking at configured macro definitions, we must look at both
what comes from the config target AND what comes from user
configuration.
Fixes#7396
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7402)
(cherry picked from commit 92ebf6c4c2)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7277)
(cherry picked from commit 46d085096c)
-path is non-portable extension, fortunately it's possible to express
.git subdirectory exclusion with -prune.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7004)
This allows the original path to be displayed when it's shown
to be invalid, so the user can relate without question.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6925)
Extra slashes in paths are permissible in Unix-like platforms...
however, when compared with the result from 'which', which returns
canonical paths, the comparison might fail even though the compared
paths may be equivalent. We make the NDK path canonical internally to
ensure the equivalence compares as equal, at least for the most
trivial cases.
Fixes#6917
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6924)
