The failure is "impossible", because we have confirmation that s_server
listens, yet Mac OS X fails to connect. This avoids 10 minutes timeout
on Travis CI.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5907)
On rare occasion 's_server | perl -ne print' can complete before
corresponding waitpid, which on Windows can results in -1 return
value. This is not an error, don't treat it like one. Collect
even return value from s_server.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5907)
For test recipes that want to use the directory of the data directory
or a subdirectory thereof, rather than just individual files.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5928)
Original logic was "if no records found *or* last one is truncated, then
leave complete records in queue." Trouble is that if we don't pass on
complete records and get complete packet in opposite direction, then
queued records will go back to sender. In other words complete records
should always be passed on. [Possible alternative would be to match
direction in reconstruct_record.]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5887)
The GOST engine needs to be loaded before we initialise libssl. Otherwise
the GOST ciphersuites are not enabled. However the SSL conf module must
be loaded before we initialise libcrypto. Otherwise we will fail to read
the SSL config from a config file properly.
Another problem is that an application may make use of both libcrypto and
libssl. If it performs libcrypto stuff first and OPENSSL_init_crypto()
is called and loads a config file it will fail if that config file has
any libssl stuff in it.
This commit separates out the loading of the SSL conf module from the
interpretation of its contents. The loading piece doesn't know anything
about SSL so this can be moved to libcrypto. The interpretation of what it
means remains in libssl. This means we can load the SSL conf data before
libssl is there and interpret it when it later becomes available.
Fixes#5809
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5818)
By asking for port 0, you get a free port dynamically assigned by OS.
TLSProxy::Proxy now asks for 0 and asks s_server to do the same. The
s_server's port is reported in "ACCEPT" line, which TLSProxy::Proxy
parses and uses.
Because the server port is now a random affair in TLSProxy::Proxy,
it's no longer possible to change it with the method 'server_port',
and it has become an accessor only. For the sake of orthogonality, so
has the method 'server_addr'.
Remove all fork calls on Windows, as fork is not to be trusted there.
This naturally minimized amount of fork calls on POSIX systems, to 1.
Sink s_server's output to 'perl -ne print' which ensures that output
is written strictly in lines. This keeps TAP parser happy.
Improve synchronization in -naccept +n cases by establishing next
connection to s_server *after* s_client finishes instead of before it
starts.
Improve error handling and clean up some methods.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5843)
test/cipherlist_test.c is an internal consistency check, and therefore
requires that the shared library it runs against matches what it was
built for. test/recipes/test_cipherlist.t is made to refuse running
unless library version and build version match.
This adds a helper program test/versions.c, that simply displays the
library and the build version.
Partially fixes#5751
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5753)
(cherry picked from commit cde87deafa)
The RAND_DRBG API was added in PR #5462 and modified by PR #5547.
This commit adds the corresponding documention.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5461)
Add BIO_get_conn_ip_family and BIO_set_conn_ip_family macros to
util/private.num and document them in BIO_s_connect.pod.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5007)
This wasn't a good solution, too many things depend on the quotes being
there consistently.
This reverts commit 49cd47eaab.
Fixes#5772
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5773)
The previous commit causes some tests to hang so we temporarily disable them.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5757)
Add it to apps as well as libraries.
Fix the copyright year generation.
Thanks to user RTT for pointing this out.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5704)
Without actually using EVP_PKEY_FLAG_AUTOARGLEN
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4793)
This is only useful when building shared libraries. This allows us to
run our tests against newer libraries when the time comes. Simply do
this:
OPENSSL_REGRESSION=/other/OpenSSL/build/tree make test
($OPENSSL_REGRESSION *must* be an absolute path)
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5619)
This commit adds a new api RAND_DRBG_set_defaults() which sets the
default type and flags for new DRBG instances. See also #5576.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5632)
In the end, it's more efficient to only have one perl instance (that
loads configdata.pm) dealing with dependency files than running one
(that still loads configdata.pm) for each such file.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5631)
Fixes#4403
This commit moves the internal header file "internal/rand.h" to
<openssl/rand_drbg.h>, making the RAND_DRBG API public.
The RAND_POOL API remains private, its function prototypes were
moved to "internal/rand_int.h" and converted to lowercase.
Documentation for the new API is work in progress on GitHub #5461.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5462)
Instead of just working line by line, we collect all dependencies for
every target and print everything out at the end, with each target
getting a potentially long list of dependencies.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5591)
All dependencies that VC gives us are absolute paths, so we need to
check if some of them are within our source or build tree. We do that
by comparing the start of each dependency with the absolute versions
of our source and build directories.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5591)
It seems that only gcc -MMD produces dependency files that are "sane"
for our needs. For all other methods, some post processing is needed:
- 'makedepend' (Unix) insists that object files are located in the
same spot as the source file.
- 'cl /Zs /showIncludes' (Visual C) has "Note: including file: " where
we'd like to see the object.
- 'CC/DECC' (VMS) insists that the object file is located in the
current directory, i.e. it strips away all directory information.
So far, we've managed this (except for the VMS case) with individual
uncommented perl command lines directly in the build file template.
We're now collecting these diverse hacks into one perl script that
takes an argument to tell what kind of input to expect and that
massages whatever it gets on STDIN and outputs the result on STDOUT.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5591)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Also adds some documentation for related existing functions/macros
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Not all algorithms will support this, since their keys are not a simple
block of data. But many can.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
With the current mechanism, old cipher strings that used to work in 1.1.0,
may inadvertently disable all TLSv1.3 ciphersuites causing connections to
fail. This is confusing for users.
In reality TLSv1.3 are quite different to older ciphers. They are much
simpler and there are only a small number of them so, arguably, they don't
need the same level of control that the older ciphers have.
This change splits the configuration of TLSv1.3 ciphers from older ones.
By default the TLSv1.3 ciphers are on, so you cannot inadvertently disable
them through your existing config.
Fixes#5359
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5392)
With the help of the perl script util/add-depends.pl, which takes all
its information directly from configdata.pm, the dependency adding
procedure can be streamlined for all support platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5606)
These functions are similar to SSL_CTX_set_cookie_{generate,verify}_cb,
but used for the application-controlled portion of TLS1.3 stateless
handshake cookies rather than entire DTLSv1 cookies.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5463)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
The introduction of thread local public and private DRBG instances (#5547)
makes it very cumbersome to change the reseeding (time) intervals for
those instances. This commit provides a function to set the default
values for all subsequently created DRBG instances.
int RAND_DRBG_set_reseed_defaults(
unsigned int master_reseed_interval,
unsigned int slave_reseed_interval,
time_t master_reseed_time_interval,
time_t slave_reseed_time_interval
);
The function is intended only to be used during application initialization,
before any threads are created and before any random bytes are generated.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5576)
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
This commit adds SSL_export_keying_material_early() which exports
keying material using early exporter master secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5252)
When the proxy re-encrypted a TLSv1.3 record it was adding a spurious
byte onto the end. This commit removes that.
The "extra" byte was intended to be the inner content type of the record.
However, TLSProxy was actually adding the original encrypted data into the
record (which already has the inner content type in it) and then adding
the spurious additional content type byte on the end (and adjusting the
record length accordingly).
It is interesting to look at why this didn't cause a failure:
The receiving peer first attempts to decrypt the data. Because this is
TLSProxy we always use a GCM based ciphersuite with a 16 byte tag. When
we decrypt this it actually gets diverted to the ossltest engine. All this
does is go through the motions of encrypting/decrypting but just passes
back the original data. Crucially it will never fail because of a bad tag!
The receiving party thinks the spurious additional byte is part of the
tag and the ossltest engine ignores it.
This means the data that gets passed back to the record layer still has
an additional spurious byte on it - but because the 16 byte tag has been
removed, this is actually the first byte of the original tag. Again
because we are using ossltest engine we aren't actually creating "real"
tags - we only ever emit 16, 0 bytes for the tag. So the spurious
additional byte always has the value 0. The TLSv1.3 spec says that records
can have additional 0 bytes on the end of them - this is "padding". So the
record layer interprets this 0 byte as padding and strips it off to end up
with the originally transmitted record data - which it can now process
successfully.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5370)
Add -bind option to s_client application to allow specification of
local address for connection.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5272)
This function makes it easier to retrieve a reference to the
authority key identifier (akid->keyid) inside a certificate.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5271)
In PR #5295 it was decided that the locking api should remain private
and used only inside libcrypto. However, the locking functions were added
back to `libcrypto.num` by `mkdef.pl`, because the function prototypes
were still listed in `internal/rand.h`. (This header contains functions
which are internal, but shared between libcrypto and libssl.)
This commit moves the prototypes to `rand_lcl.h` and changes the names
to lowercase, following the convention therein. It also corrects an
outdated documenting comment.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5375)
It's a convenient complement to OSSL_STORE_ctrl()
Suggested by Norm Green
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5363)
The functions drbg_setup() and drbg_cleanup() used to duplicate a lot of
code from RAND_DRBG_new() and RAND_DRBG_free(). This duplication has been
removed, which simplifies drbg_setup() and makes drbg_cleanup() obsolete.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
This commit adds three new accessors to the internal DRBG lock
int RAND_DRBG_lock(RAND_DRBG *drbg)
int RAND_DRBG_unlock(RAND_DRBG *drbg)
int RAND_DRBG_enable_locking(RAND_DRBG *drbg)
The three shared DRBGs are intended to be used concurrently, so they
have locking enabled by default. It is the callers responsibility to
guard access to the shared DRBGs by calls to RAND_DRBG_lock() and
RAND_DRBG_unlock().
All other DRBG instances don't have locking enabled by default, because
they are intendended to be used by a single thread. If it is desired,
locking can be enabled by using RAND_DRBG_enable_locking().
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5294)
%disabled_algorithms isn't necessarily initialised with the "algos"
'DEPRECATEDIN_1_1_0' etc. However, we know that @known_algorithms has
them all, so use that to find them instead.
Fixes#5157
(where this was reported)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5282)
If a module is disablable (i.e. can be configured with 'no-FOO'), the
resulting header file needs to be guarded with a check of the
corresponding OPENSSL_NO_FOO. While this seem fairly innocuous, it
has an impact on the information in util/*.num, generated by mkdef.pl.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5275)
This script kept its own database of disablable algorithms, which is a
maintenance problem, as it's not always perfectly in sync with what
Configure does. However, we do have all the data in configdata.pm,
produced by Configure, so let's use that instead.
Also, make sure to parse the *err.h header files, as they contain
function declarations that might not be present elsewhere.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5157)
Add SSL_verify_client_post_handshake() for servers to initiate PHA
Add SSL_force_post_handshake_auth() for clients that don't have certificates
initially configured, but use a certificate callback.
Update SSL_CTX_set_verify()/SSL_set_verify() mode:
* Add SSL_VERIFY_POST_HANDSHAKE to postpone client authentication until after
the initial handshake.
* Update SSL_VERIFY_CLIENT_ONCE now only sends out one CertRequest regardless
of when the certificate authentication takes place; either initial handshake,
re-negotiation, or post-handshake authentication.
Add 'RequestPostHandshake' and 'RequirePostHandshake' SSL_CONF options that
add the SSL_VERIFY_POST_HANDSHAKE to the 'Request' and 'Require' options
Add support to s_client:
* Enabled automatically when cert is configured
* Can be forced enabled via -force_pha
Add support to s_server:
* Use 'c' to invoke PHA in s_server
* Remove some dead code
Update documentation
Update unit tests:
* Illegal use of PHA extension
* TLSv1.3 certificate tests
DTLS and TLS behave ever-so-slightly differently. So, when DTLS1.3 is
implemented, it's PHA support state machine may need to be different.
Add a TODO and a #error
Update handshake context to deal with PHA.
The handshake context for TLSv1.3 post-handshake auth is up through the
ClientFinish message, plus the CertificateRequest message. Subsequent
Certificate, CertificateVerify, and Finish messages are based on this
handshake context (not the Certificate message per se, but it's included
after the hash). KeyUpdate, NewSessionTicket, and prior Certificate
Request messages are not included in post-handshake authentication.
After the ClientFinished message is processed, save off the digest state
for future post-handshake authentication. When post-handshake auth occurs,
copy over the saved handshake context into the "main" handshake digest.
This effectively discards the any KeyUpdate or NewSessionTicket messages
and any prior post-handshake authentication.
This, of course, assumes that the ID-22 did not mean to include any
previous post-handshake authentication into the new handshake transcript.
This is implied by section 4.4.1 that lists messages only up to the
first ClientFinished.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4964)
The reason to do this is that some output might start with an 'ok',
which TAP catches and takes for TAP output. The TAP compatible way is
to make all output it shouldn't catch look like comments.
We do this by setting the environment variable HARNESS_OSSL_PREFIX
during tests. When that is set, apps/openssl uses BIO_f_linebuffer
and sets its prefix to the content of that environment variable.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5224)
Conceptually, this is a squashed version of:
Revert "Address feedback"
This reverts commit 75551e07bd.
and
Revert "Add CRYPTO_thread_glock_new"
This reverts commit ed6b2c7938.
But there were some intervening commits that made neither revert apply
cleanly, so instead do it all as one shot.
The crypto global locks were an attempt to cope with the awkward
POSIX semantics for pthread_atfork(); its documentation (the "RATIONALE"
section) indicates that the expected usage is to have the prefork handler
lock all "global" locks, and the parent and child handlers release those
locks, to ensure that forking happens with a consistent (lock) state.
However, the set of functions available in the child process is limited
to async-signal-safe functions, and pthread_mutex_unlock() is not on
the list of async-signal-safe functions! The only synchronization
primitives that are async-signal-safe are the semaphore primitives,
which are not really appropriate for general-purpose usage.
However, the state consistency problem that the global locks were
attempting to solve is not actually a serious problem, particularly for
OpenSSL. That is, we can consider four cases of forking application
that might use OpenSSL:
(1) Single-threaded, does not call into OpenSSL in the child (e.g.,
the child calls exec() immediately)
For this class of process, no locking is needed at all, since there is
only ever a single thread of execution and the only reentrancy is due to
signal handlers (which are themselves limited to async-signal-safe
operation and should not be doing much work at all).
(2) Single-threaded, calls into OpenSSL after fork()
The application must ensure that it does not fork() with an unexpected
lock held (that is, one that would get unlocked in the parent but
accidentally remain locked in the child and cause deadlock). Since
OpenSSL does not expose any of its internal locks to the application
and the application is single-threaded, the OpenSSL internal locks
will be unlocked for the fork(), and the state will be consistent.
(OpenSSL will need to reseed its PRNG in the child, but that is
an orthogonal issue.) If the application makes use of locks from
libcrypto, proper handling for those locks is the responsibility of
the application, as for any other locking primitive that is available
for application programming.
(3) Multi-threaded, does not call into OpenSSL after fork()
As for (1), the OpenSSL state is only relevant in the parent, so
no particular fork()-related handling is needed. The internal locks
are relevant, but there is no interaction with the child to consider.
(4) Multi-threaded, calls into OpenSSL after fork()
This is the case where the pthread_atfork() hooks to ensure that all
global locks are in a known state across fork() would come into play,
per the above discussion. However, these "calls into OpenSSL after
fork()" are still subject to the restriction to async-signal-safe
functions. Since OpenSSL uses all sorts of locking and libc functions
that are not on the list of safe functions (e.g., malloc()), this
case is not currently usable and is unlikely to ever be usable,
independently of the locking situation. So, there is no need to
go through contortions to attempt to support this case in the one small
area of locking interaction with fork().
In light of the above analysis (thanks @davidben and @achernya), go
back to the simpler implementation that does not need to distinguish
"library-global" locks or to have complicated atfork handling for locks.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5089)
We don't need to send this extension in normal operation since
we are our own X.509 library, but add some test cases that force
the extension to be sent and exercise our code to process the extension.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5068)
Add a -rsigopt option to the ocsp command that allows signature parameters to be provided for the signing of OCSP responses. The parameters that may be provided to -rsigopt are the same as may be provided to -sigopt in the ca, req, and x509 commands.
This PR also defines a OCSP_basic_sign_ctx() function, which functions in the same way as OCSP_basic_sign(), except that it accepts a EVP_MD_CTX rather than a key and digest. The OCSP_basic_sign_ctx() function is used to implement the -rsigopt option in the ocsp command.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4190)
This enables sending and receiving of the TLSv1.3 cookie on the server side
as appropriate.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4435)
Support added for these two digests, available only via the EVP interface.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5093)
On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.
To avoid this scenario, we don't create a new proxy port for each new
client run. Instead, we create one proxy socket when the proxy object
is created, and close it when destroying that object.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5095)
On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.
An easy solution is not to use ReuseAddr on Windows.
Thanks Bernd Edlinger for the suggestion.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5103)
On Windows, it seems that doing so in a forked (pseudo-)process
sometimes affects the parent, and thereby hides all the results that
are supposed to be seen by the running test framework (the "ok" and
"not ok" lines).
It turns out that our redirection isn't necessary, as the test
framework seems to swallow it all in non-verbose mode anyway.
It's possible that we did need this at some point, but the framework
has undergone some refinement since then...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5100)
We use the first we can of the following IO::Socket modules to create
sockets:
- IO::Socket::INET6
- IO::Socket::IP
- IO::Socket::INET
The last of them doesn't support IPv6, so if that's the one available,
we must force the s_client and s_server processes to use IPv4.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5092)
To avoid check failure, make dummy RETURN VALUES sections in the docs
which have no real functions decribed inside...
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4976)
I received this error from a TLSProxy test:
Failed to start up server (localhost,4443): Transport endpoint is not
connected
So, extend the timeout before we give up trying to connect to the server.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5088)
- Avoid creating repeated year ranges <current_year>-<current_year> for
documents which were added in the current year.
- Use extended regular expressions for better readability (less quoting)
- Use a shebang line which is more portable
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5044)
usage: openssl-update-copyright [-h|--help] [file|directory] ...
Updates the year ranges of all OpenSSL copyright statements in the given
files or directories. (Directories are traversed recursively.)
Only copyright statements containing the string 'The OpenSSL Project' are
affected. The copyright time range is adjusted to include the current year.
If only a single year was specified, it is replaced by a time range starting
at that year and ending at the current year. All '(c)' and '(C)' signs are
preserved.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5027)
Every DRBG now supports automatic reseeding not only after a given
number of generate requests, but also after a specified time interval.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
A third shared DRBG is added, the so called master DRBG. Its sole purpose
is to reseed the two other shared DRBGs, the public and the private DRBG.
The randomness for the master DRBG is either pulled from the os entropy
sources, or added by the application using the RAND_add() call.
The master DRBG reseeds itself automatically after a given number of generate
requests, but can also be reseeded using RAND_seed() or RAND_add().
A reseeding of the master DRBG is automatically propagated to the public
and private DRBG. This construction fixes the problem, that up to now
the randomness provided by RAND_add() was added only to the public and
not to the private DRBG.
Signed-off-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4402)
