'openssl pkeyutl' uses stat() to determine the file size when signing using
Ed25519/Ed448, and this was guarded with OPENSSL_NO_POSIX_IO.
It is however arguable if stat() is a POSIX IO function, considering
that it doesn't use file descriptors, and even more so since we use
stat() elsewhere without that guard.
This will allow test/recipes/20-test_pkeyutl.t to be able to do its
work for Ed25519/Ed448 signature tests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8498)
Complete and improve error output of parse_name() in apps/apps.c
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8193)
It is important that output to the trace channels occurs only inside
a trace group. This precondtion is satisfied whenever the standard
TRACE macros are used. It can be violated only by a bad programming
mistake, like copying the 'trc_out' pointer and using it outside
the trace group.
This commit enforces correct pairing of the OSSL_TRACE_CTRL_BEGIN and
OSSL_TRACE_CTRL_END callbacks, and checks that OSSL_TRACE_CTRL_WRITE
callbacks only occur within such groups.
While implementing it, it turned out that the group assertion failed
apps/openssl.c:152: OpenSSL internal error: \
Assertion failed: trace_data->ingroup
because the set_trace_data() function invokes some callbacks which
generate trace output, but the correct channel type was set only
after the set_trace_data() call.
To fix the failed assertions, the correct channel type is now set
inside the set_trace_data() call, instead of doing it afterwards.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
The openssl app registers trace callbacks which automatically
set a line prefix in the OSSL_TRACE_CTRL_BEGIN callback.
This prefix needs to be cleared in the OSSL_TRACE_CTRL_END
callback, otherwise a memory leak is reported when openssl
is built with crypto-mdebug enabled.
This leak causes the tests to fail when tracing and memory
debugging are enabled.
The leak can be observed by any command that produces trace
output, e.g. by
OPENSSL_TRACE=ANY util/shlib_wrap.sh apps/openssl version
...
[00:19:14] 4061 file=apps/bf_prefix.c, line=152, ...
26 bytes leaked in 1 chunks
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8463)
With the recent addition of the -rawin option it should be possible for
pkeyutl to sign and verify with Ed448 and Ed2559. The main remaining
stumbling block is that those algorirthms only support "oneshot" operation.
This commit enables pkeyutl to handle that.
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8431)
When the argument for '-pass' was badly formed, that argument got
displayed in full. This turns out to not be such a good idea if the
user simply forgot to start the argument with 'pass:', or spellt the
prefix incorrectly. We therefore change the display to say that a
colon is missing or only showing the incorrect prefix.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6218)
All other instances are OPENSSL_NO_ENGINE without the trailing "S".
Fixes build when configured with no-engine.
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8449)
The trace API doesn't know that the BIOs we give it, let alone those
we attach to callbacks as 'void *data', need to be cleaned up. This
must be done in the application.
To ensure this cleanup is done as late as possible, use atexit().
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)
Use the environment variables OPENSSL_TRACE to determine what's going
to be enabled. The value of this variables is a comma separated list
of trace and debugging names, which correspond to the trace category
macros defined in include/openssl/trace.h.
For example, setting OPENSSL_DEBUG=TRACE,SSL will enable debugging output
for the types OSSL_TRACE_CATEGORY_TRACE and OSSL_TRACE_CATEGORY_SSL.
This also slightly changes the handling of the prefix method in
apps/apps.c. This is for the better, as the prefix method pointer was
unneccessarily stored in two places.
Co-authored-by: Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8198)
From a Unix point of view, some other platform families have certain
quirks. Windows command prompt doesn't expand globs into actual file
names, so we must do this. VMS has some oddity with argv pointer size
that can cause crashes if you're not careful (by copying it to a less
surprising pointer size array).
The fixups already exist and are used in the apps/ code. However, the
testutil code started using the opt routines from apps/ without
including the non-Unix fixups. This change fixes that.
For VMS' sake, libtestutil gets an app_malloc() shim, to avoid sucking
in all of apps/apps.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8381)
Some signature algorithms require special treatment for digesting, such
as SM2. This patch adds the ability of handling raw input data in
apps/pkeyutl other than accepting only pre-hashed input data.
Beside, SM2 requries an ID string when signing or verifying a piece of data,
this patch also adds the ability for apps/pkeyutil to specify that ID
string.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8186)
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8175)
The "verify_return_error" option in s_client is documented as:
Return verification errors instead of continuing. This will typically
abort the handshake with a fatal error.
In practice this option was ignored unless also accompanied with the
"-verify" option. It's unclear what the original intention was. One fix
could have been to change the documentation to match the actual behaviour.
However it seems unecessarily complex and unexpected that you should need
to have both options. Instead the fix implemented here is make the option
match the documentation so that "-verify" is not also required.
Note that s_server has a similar option where "-verify" (or "-Verify") is
still required. This makes more sense because those options additionally
request a certificate from the client. Without a certificate there is no
possibility of a verification failing, and so "-verify_return_error" doing
nothing seems ok.
Fixes#8079
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/8080)
This got triggered by test/testutil.h including ../apps/opt.h.
Some compilers do all inclusions from the directory of the C file
being compiled, so when a C file includes a header file with a
relative file spec, and that header file also includes another header
file with a relative file spec, the compiler no longer follows.
As a specific example, test/testutil/basic_output.c included
../testutil.h. Fine so far, but then, test/testutil.h includes
../apps/opt.h, and the compiler ends up trying to include (seen from
the source top) test/apps/opt.h rather than apps/opt.h, and fails.
The solution could have been to simply add apps/ as an inclusion
directory. However, that directory also has header files that have
nothing to do with libapps, so we take this a bit further, create
apps/include and move libapps specific headers there, and then add
apps/include as inclusion directory in the build.info files where
needed.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8210)
This allows the user to override our defaults if needed, and in a
consistent manner.
Partial fix for #7607
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7624)
Trim trailing whitespace. It doesn't match OpenSSL coding standards,
AFAICT, and it can cause problems with git tooling.
Trailing whitespace remains in test data and external source.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8092)
When computing the end-point shared secret, don't take the
terminating NULL character into account.
Please note that this fix breaks interoperability with older
versions of OpenSSL, which are not fixed.
Fixes#7956
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7957)
Previously if -psk was given a bad key it would print "Not a hex
number 's_server'".
CLA: Trivial
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/8113)
The option -twopass to the pkcs12 app is ignored if -passin, -passout
or -password is used. We should complain if an attempt is made to use
it in combination with those options.
Fixes#8107
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8114)
A CAdES Basic Electronic Signature (CAdES-BES) contains, among other
specifications, a collection of Signing Certificate reference attributes,
stored in the signedData ether as ESS signing-certificate or as
ESS signing-certificate-v2. These are described in detail in Section 5.7.2
of RFC 5126 - CMS Advanced Electronic Signatures (CAdES).
This patch adds support for adding ESS signing-certificate[-v2] attributes
to CMS signedData. Although it implements only a small part of the RFC, it
is sufficient many cases to enable the `openssl cms` app to create signatures
which comply with legal requirements of some European States (e.g Italy).
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7893)
Before 1.1.0, this command letter is not sent to a server.
CLA: trivial
(cherry picked from commit bc180cb4887c2e82111cb714723a94de9f6d2c35)
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8081)
We have two classes of scripts to be installed, those that are
installed as "normal" programs, and those that are installed as "misc"
scripts. These classes are installed in different locations, so the
build file templates must pay attention.
Because we didn't have the tools to indicate what scripts go where, we
had these scripts hard coded in the build template files, with the
maintenance issues that may cause. Now that we have attributes, those
can be used to classify the installed scripts, and have the build file
templates simply check the attributes to know what's what.
Furthermore, the 'tsget.pl' script exists both as 'tsget.pl' and
'tsget', which is done by installing a symbolic link (or copy). This
link name is now given through an attribute, which results in even
less hard coding in the Unix Makefile template.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
This means that all PROGRAMS_NO_INST, LIBS_NO_INST, ENGINES_NO_INST
and SCRIPTS_NO_INST are changed to be PROGRAM, LIBS, ENGINES and
SCRIPTS with the associated attribute 'noinst'.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7581)
1) Add two new flags (-proxy_user & -proxy_pass) to s_client to add support for basic (base64) proxy authentication.
2) Add a "Proxy-Connection: Keep-Alive" HTTP header which is a workaround for some broken proxies which otherwise close the connection when entering tunnel mode (eg Squid 2.6).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7975)
CID 1440002 (#1 of 1): Use after free (USE_AFTER_FREE)
Not a deadly error, because error was just before app exit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)
Remove some casts on password callback by adding a wrapper function.
Remove level of indent by doing an early-return on failure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7873)
Fixes#7722
CLA: trivial
Signed-off-by: Mateja Milosevic <quantumgleam@gmail.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7915)
Based originally on github.com/dfoxfranke/libaes_siv
This creates an SIV128 mode that uses EVP interfaces for the CBC, CTR
and CMAC code to reduce complexity at the cost of perfomance. The
expected use is for short inputs, not TLS-sized records.
Add multiple AAD input capacity in the EVP tests.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3540)
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)
We're strictly use version numbers of the form MAJOR.MINOR.PATCH.
Letter releases are things of days past.
The most central change is that we now express the version number with
three macros, one for each part of the version number:
OPENSSL_VERSION_MAJOR
OPENSSL_VERSION_MINOR
OPENSSL_VERSION_PATCH
We also provide two additional macros to express pre-release and build
metadata information (also specified in semantic versioning):
OPENSSL_VERSION_PRE_RELEASE
OPENSSL_VERSION_BUILD_METADATA
To get the library's idea of all those values, we introduce the
following functions:
unsigned int OPENSSL_version_major(void);
unsigned int OPENSSL_version_minor(void);
unsigned int OPENSSL_version_patch(void);
const char *OPENSSL_version_pre_release(void);
const char *OPENSSL_version_build_metadata(void);
Additionally, for shared library versioning (which is out of scope in
semantic versioning, but that we still need):
OPENSSL_SHLIB_VERSION
We also provide a macro that contains the release date. This is not
part of the version number, but is extra information that we want to
be able to display:
OPENSSL_RELEASE_DATE
Finally, also provide the following convenience functions:
const char *OPENSSL_version_text(void);
const char *OPENSSL_version_text_full(void);
The following macros and functions are deprecated, and while currently
existing for backward compatibility, they are expected to disappear:
OPENSSL_VERSION_NUMBER
OPENSSL_VERSION_TEXT
OPENSSL_VERSION
OpenSSL_version_num()
OpenSSL_version()
Also, this function is introduced to replace OpenSSL_version() for all
indexes except for OPENSSL_VERSION:
OPENSSL_info()
For configuration, the option 'newversion-only' is added to disable all
the macros and functions that are mentioned as deprecated above.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7724)
Fixes#7675
On macOS, if you call `connect()` on a UDP socket you cannot then
call `sendto()` with a destination, otherwise it fails with Err#56
('socket is already connected').
By calling `BIO_ctrl_set_connected()` on the wbio we can tell it
that the socket has been connected and make it call `send()` rather
than `sendto()`.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7676)
This patch adds the ability to interactively enter passphrases for
the pkeyutl application. For example, you could use
$ openssl pkeyutl -kdf TLS1-PRF -kdflen 8 -pkeyopt md:md5
-pkeyopt_passin secret -pkeyopt_passin seed
To have the "secret" and "seed" values read interactively from keyboard
(with hidden input). Alternatively, the pass phrase argument syntax is
also supported, e.g.:
$ openssl pkeyutl -kdf TLS1-PRF -kdflen 8 -pkeyopt md:md5
-pkeyopt_passin secret:stdin -pkeyopt_passin seed:env:SEEDVAR
To have "secret" read from stdin and "seed" from the environment
variable SEEDVAR.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5697)
SSL_get_signature_nid() -- local signature algorithm
SSL_get_signature_type_nid() -- local signature algorithm key type
SSL_get_peer_tmp_key() -- Peer key-exchange public key
SSL_get_tmp_key -- local key exchange public key
Aliased pre-existing SSL_get_server_tmp_key(), which was formerly
just for clients, to SSL_get_peer_tmp_key(). Changed internal
calls to use the new name.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7427)
