details in s_client.
Also add ctrl to set client certificate types. If not used sensible values
will be included based on supported signature algorithms: for example if
we don't include any DSA signing algorithms the DSA certificate type is
omitted.
Fix restriction in old code where certificate types would be truncated
if it exceeded TLS_CT_NUMBER.
the permitted signature algorithms for server and client authentication
are the same but it is now possible to set different algorithms for client
authentication only.
the certificate can be used for (if anything). Set valid_flags field
in new tls1_check_chain function. Simplify ssl_set_cert_masks which used
to have similar checks in it.
Add new "cert_flags" field to CERT structure and include a "strict mode".
This enforces some TLS certificate requirements (such as only permitting
certificate signature algorithms contained in the supported algorithms
extension) which some implementations ignore: this option should be used
with caution as it could cause interoperability issues.
TLS v1.2. These are sent as an extension for clients and during a certificate
request for servers.
TODO: add support for shared signature algorithms, respect shared algorithms
when deciding which ciphersuites and certificates to permit.
enabled instead of requiring an application to hard code a (possibly
inappropriate) parameter set and delve into EC internals we just
automatically use the preferred curve.
Tidy some code up.
Don't allocate a structure to handle ECC extensions when it is used for
default values.
Make supported curves configurable.
Add ctrls to retrieve shared curves: not fully integrated with rest of
ECC code yet.
structure.
Before this the only way to add a custom chain was in the parent SSL_CTX
(which is shared by all key types and SSL structures) or rely on auto
chain building (which is performed on each handshake) from the trust store.
The cipher definitions of these ciphersuites have been around since SSLeay
but were always disabled. Now OpenSSL supports DH certificates they can be
finally enabled.
Various additional changes were needed to make them work properly: many
unused fixed DH sections of code were untested.
New function to retrieve compression method from SSL_SESSION structure.
Delete SSL_SESSION_get_id_len and SSL_SESSION_get0_id functions
as they duplicate functionality of SSL_SESSION_get_id. Note: these functions
have never appeared in any release version of OpenSSL.
Submitted by: Peter Sylvester <peter.sylvester@edelweb.fr>
Reviewed by: steve
Remove unnecessary code for srp and to add some comments to
s_client.
- the callback to provide a user during client connect is
no longer necessary since rfc 5054 a connection attempt
with an srp cipher and no user is terminated when the
cipher is acceptable
- comments to indicate in s_client the (non-)usefulness of
th primalaty tests for non known group parameters.
checking added, SHA256 PRF support added.
At present only RSA key exchange ciphersuites work with TLS v1.2 as the
new signature format is not yet implemented.
with the appropriate parameters which calls OBJ_bsearch(). A compiler will
typically inline this.
This avoids the need for cmp_xxx variables and fixes unchecked const issues
with CHECKED_PTR_OF()
of handshake failure
2. Changes to x509_certificate_type function (crypto/x509/x509type.c) to
make it recognize GOST certificates as EVP_PKT_SIGN|EVP_PKT_EXCH
(required for s3_srvr to accept GOST client certificates).
3. Changes to EVP
- adding of function EVP_PKEY_CTX_get0_peerkey
- Make function EVP_PKEY_derive_set_peerkey work for context with
ENCRYPT operation, because we use peerkey field in the context to
pass non-ephemeral secret key to GOST encrypt operation.
- added EVP_PKEY_CTRL_SET_IV control command. It is really
GOST-specific, but it is used in SSL code, so it has to go
in some header file, available during libssl compilation
4. Fix to HMAC to avoid call of OPENSSL_cleanse on undefined data
5. Include des.h if KSSL_DEBUG is defined into some libssl files, to
make debugging output which depends on constants defined there, work
and other KSSL_DEBUG output fixes
6. Declaration of real GOST ciphersuites, two authentication methods
SSL_aGOST94 and SSL_aGOST2001 and one key exchange method SSL_kGOST
7. Implementation of these methods.
8. Support for sending unsolicited serverhello extension if GOST
ciphersuite is selected. It is require for interoperability with
CryptoPro CSP 3.0 and 3.6 and controlled by
SSL_OP_CRYPTOPRO_TLSEXT_BUG constant.
This constant is added to SSL_OP_ALL, because it does nothing, if
non-GOST ciphersuite is selected, and all implementation of GOST
include compatibility with CryptoPro.
9. Support for CertificateVerify message without length field. It is
another CryptoPro bug, but support is made unconditional, because it
does no harm for draft-conforming implementation.
10. In tls1_mac extra copy of stream mac context is no more done.
When I've written currently commited code I haven't read
EVP_DigestSignFinal manual carefully enough and haven't noticed that
it does an internal digest ctx copying.
This implementation was tested against
1. CryptoPro CSP 3.6 client and server
2. Cryptopro CSP 3.0 server
(draft-rescorla-tls-opaque-prf-input-00.txt), and do some cleanups and
bugfixes on the way. In particular, this fixes the buffer bounds
checks in ssl_add_clienthello_tlsext() and in ssl_add_serverhello_tlsext().
Note that the opaque PRF Input TLS extension is not compiled by default;
see CHANGES.
This change resolves a number of problems and obviates multiple kludges.
A new feature is that you can now say "AES256" or "AES128" (not just
"AES", which enables both).
In some cases the ciphersuite list generated from a given string is
affected by this change. I hope this is just in those cases where the
previous behaviour did not make sense.
have a uniform representation for those over all architectures, so a
little bit of hackery is needed.
Contributed by nagendra modadugu <nagendra@cs.stanford.edu>
I have tried to convert 'len' type variable declarations to unsigned as a
means to address these warnings when appropriate, but when in doubt I have
used casts in the comparisons instead. The better solution (that would get
us all lynched by API users) would be to go through and convert all the
function prototypes and structure definitions to use unsigned variables
except when signed is necessary. The proliferation of (signed) "int" for
strictly non-negative uses is unfortunate.
New macros SSL[_CTX]_set_msg_callback_arg().
Message callback imlementation for SSL 3.0/TLS 1.0 (no SSL 2.0 yet).
New '-msg' option for 'openssl s_client' and 'openssl s_server'
that enable a message callback that displays all protocol messages.
In ssl3_get_client_hello (ssl/s3_srvr.c), generate a fatal alert if
client_version is smaller than the protocol version in use.
Also change ssl23_get_client_hello (ssl/s23_srvr.c) to select TLS 1.0
if the client demanded SSL 3.0 but only TLS 1.0 is enabled; then the
client will at least see that alert.
Fix SSL[_CTX]_ctrl prototype (void * instead of char * for generic
pointer).
Add/update some OpenSSL copyright notices.
His comments are:
. adds use of replay cache to protect against replay attacks
. adds functions kssl_tgt_is_available() and
kssl_keytab_is_available() which are used within s3_lib.c
and ssl_lib.c to determine at runtime whether or not
KRB5 ciphers can be supported during the current session.
applications to use EVP. Add missing calls to HMAC_cleanup() and
don't assume HMAC_CTX can be copied using memcpy().
Note: this is almost identical to the patch submitted to openssl-dev
by Verdon Walker <VWalker@novell.com> except some redundant
EVP_add_digest_()/EVP_cleanup() calls were removed and some changes
made to avoid compiler warnings.
This is mostly a work around for the old VC++ problem
that it treats func() as func(void).
Various prototypes had been added to 'compare' function
pointers that triggered this. This could be fixed by removing
the prototype, adding function pointer casts to every call or
changing the passed function to use the expected arguments.
I mostly did the latter.
The mkdef.pl script was modified to remove the typesafe
functions which no longer exist.
Oh and some functions called OPENSSL_freeLibrary() were
changed back to FreeLibrary(), wonder how that happened :-)
like Malloc, Realloc and especially Free conflict with already existing names
on some operating systems or other packages. That is reason enough to change
the names of the OpenSSL memory allocation macros to something that has a
better chance of being unique, like prepending them with OPENSSL_.
This change includes all the name changes needed throughout all C files.
in SSL_new.
If SSL_OP_SINGLE_DH_USE is set, don't waste time in SSL_[CTX_]set_tmp_dh
on computing a DH key that will be ignored anyway.
ssltest -dhe1024dsa (w/ 160-bit sub-prime) had an unfair performance
advantage over -dhe1024 (safe prime): SSL_OP_SINGLE_DH_USE was
effectively always enabled because SSL_new ignored the DH key set in
the SSL_CTX. Now -dhe1024 takes the server only about twice as long
as -dhe1024dsa instead of three times as long (for 1024 bit RSA
with 1024 bit DH).
designed for that. This removes the potential error to mix data and
function pointers.
Please note that I'm a little unsure how incorrect calls to the old
ctrl functions should be handled, in som cases. I currently return 0
and that's it, but it may be more correct to generate a genuine error
in those cases.
non-function pointers to function pointers and vice versa.
The current solution is to have unions that describe the
conversion we want to do, and gives us the ability to extract
the type of data we want.
The current solution is a quick fix, and can probably be made
in a more general or elegant way.
private keys and/or callback functions which directly correspond to their
SSL_CTX_xxx() counterparts but work on a per-connection basis. This is needed
for applications which have to configure certificates on a per-connection
basis (e.g. Apache+mod_ssl) instead of a per-context basis (e.g.
s_server).
For the RSA certificate situation is makes no difference, but for the DSA
certificate situation this fixes the "no shared cipher" problem where the
OpenSSL cipher selection procedure failed because the temporary keys were not
overtaken from the context and the API provided no way to reconfigure them.
The new functions now let applications reconfigure the stuff and they are in
detail: SSL_need_tmp_RSA, SSL_set_tmp_rsa, SSL_set_tmp_dh,
SSL_set_tmp_rsa_callback and SSL_set_tmp_dh_callback. Additionally a new
non-public-API function ssl_cert_instantiate() is used as a helper function
and also to reduce code redundancy inside ssl_rsa.c.
Submitted by: Ralf S. Engelschall
Reviewed by: Ben Laurie
within SSL_MKEY_MASK or SSL_AUTH_MASK, they are within SSL_EXP_MASK. So, the
original variable has to be used instead of the already masked variable.
Submitted by: Richard Levitte <levitte@stacken.kth.se>
Reviewed by: Ralf S. Engelschall
without -debug option to mk1mf.pl. Change _export to is_export (_export is
a reserved word under VC++). Add yucky function prototype function pointer
casts. Sanitise the included files in crypto/x509v3.
Also changed ssleay.exe target to openssl.exe
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
Fix so that the version number in the master secret, when passed
via RSA, checks that if TLS was proposed, but we roll back to SSLv3
(because the server will not accept higher), that the version number
is 0x03,0x01, not 0x03,0x00
[Eric A. Young, (from changes to C2Net SSLeay, integrated by Mark Cox)]
Submitted by:
Reviewed by:
PR:
1. The already released version was 0.9.1c and not 0.9.1b
2. The next release should be 0.9.2 and not 0.9.1d, because
first the changes are already too large, second we should avoid any more
0.9.1x confusions and third, the Apache version semantics of
VERSION.REVISION.PATCHLEVEL for the version string is reasonable (and here
.2 is already just a patchlevel and not major change).
tVS: ----------------------------------------------------------------------
