Just because an engine implements algorithm methods, that doesn't mean
it also implements the ASN1 method. Therefore, be careful when looking
for an ASN1 method among all engines, don't try to use one that doesn't
exist.
Fixes#6381
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6383)
(cherry picked from commit 1ac3cd6277)
(cherry picked from commit 13b578ada3)
Found by coverity. This is an artifact left over from the original
decaf import which generated the source code for different curves. For
curve 448 this is dead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6373)
In `aes_wrap_cipher()`, the minimal out buff length is `(inlen - 8)`.
Since it calls `CRYPTO_128_unwrap_pad()` underneath, it makes sense to
reduce the minimal out length in `CRYPTO_128_unwrap_pad()` to align to
its caller.
Signed-off-by: Yihong Wang <yh.wang@ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6266)
The One&Done attack, which is described in a paper to appear in the
USENIX Security'18 conference, uses EM emanations to recover the values
of the bits that are obtained using BN_is_bit_set while constructing
the value of the window in BN_mod_exp_consttime. The EM signal changes
slightly depending on the value of the bit, and since the lookup of a
bit is surrounded by highly regular execution (constant-time Montgomery
multiplications) the attack is able to isolate the (very brief) part of
the signal that changes depending on the bit. Although the change is
slight, the attack recovers it successfully >90% of the time on several
phones and IoT devices (all with ARM processors with clock rates around
1GHz), so after only one RSA decryption more than 90% of the bits in
d_p and d_q are recovered correctly, which enables rapid recovery of
the full RSA key using an algorithm (also described in the paper) that
modifies the branch-and-prune approach for a situation in which the
exponents' bits are recovered with errors, i.e. where we do not know
a priori which bits are correctly recovered.
The mitigation for the attack is relatively simple - all the bits of
the window are obtained at once, along with other bits so that an
entire integer's worth of bits are obtained together using masking and
shifts, without unnecessarily considering each bit in isolation. This
improves performance somewhat (one call to bn_get_bits is faster than
several calls to BN_is_bit_set), so the attacker now gets one signal
snippet per window (rather than one per bit) in which the signal is
affected by all bits in the integer (rather than just the one bit).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6276)
32-bit vector rotate instruction was defined from beginning, it
not being used from the start must be a brain-slip...
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6363)
OpenSSL 1.1.0 made the X509_LOOKUP_METHOD structure opaque, so
applications that were previously able to define a custom lookup method
are not able to be ported.
This commit adds getters and setters for each of the current fields of
X509_LOOKUP_METHOD, along with getters and setters on several associated
opaque types (such as X509_LOOKUP and X509_OBJECT).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6152)
Return immediately upon discovery of bad message digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6298)
This reverts commit a6f5b11634.
The EVP_PKEY_sign() function is intended for pre-hashed input which is
not supported by our EdDSA implementation.
See the discussion in PR 5880
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
We check that the curve name associated with the point is the same as that
for the curve.
Fixes#6302
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6323)
TlsGetValue clears the last error even on success, so that callers may
distinguish it successfully returning NULL or failing. This error-mangling
behavior interferes with the caller's use of GetLastError. In particular
SSL_get_error queries the error queue to determine whether the caller should
look at the OS's errors. To avoid destroying state, save and restore the
Windows error.
Fixes#6299.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6316)
Per SEC 1, the curve coefficients must be padded up to size. See C.2's
definition of Curve, C.1's definition of FieldElement, and 2.3.5's definition
of how to encode the field elements in http://www.secg.org/sec1-v2.pdf.
This comes up for P-521, where b needs a leading zero.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6314)
Only check the CN against DNS name contraints if the
`X509_CHECK_FLAG_NEVER_CHECK_SUBJECT` flag is not set, and either the
certificate has no DNS subject alternative names or the
`X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT` flag is set.
Add pertinent documentation, and touch up some stale text about
name checks and DANE.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the lengths of both names is 0 then don't attempt to do a memcmp.
Issue reported by Simon Friedberger, Robert Merget and Juraj Somorovsky.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6291)
A previous change of this function introduced a fragility when the
destination happens to be the same as the source. Such alias isn't
recommended, but could still happen, for example in this kind of code:
X509_NAME *subject = X509_get_issuer_name(x);
/* ... some code passes ... */
X509_set_issuer_name(x, subject);
Fixes#4710
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6280)
Using the ca application to sign certificates with EdDSA failed because it
is not possible to set the digest to "null". This adds the capability and
updates the documentation accordingly.
Fixes#6201
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6286)
Experiments have shown that the lookup table used by BN_GF2m_mod_arr
introduces sufficient timing signal to recover the private key for an
attacker with access to cache timing information on the victim's host.
This only affects binary curves (which are less frequently used).
No CVE is considered necessary for this issue.
The fix is to replace the lookup table with an on-the-fly calculation of
the value from the table instead, which can be performed in constant time.
Thanks to Youngjoo Shin for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6270)
The Console UI method always set echo on after prompting without
echo. However, echo might not have been on originally, so just
restore the original TTY settings.
Fixes#2373
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6156)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
* EC_POINT_mul is now responsible for constant time point multiplication
(for single fixed or variable point multiplication, when the scalar is
in the range [0,group_order), so we need to strip the nonce padding
from ECDSA.
* Entry added to CHANGES
* Updated EC_POINT_mul documentation
- Integrate existing EC_POINT_mul and EC_POINTs_mul entries in the
manpage to reflect the shift in constant-time expectations when
performing a single fixed or variable point multiplication;
- Add documentation to ec_method_st to reflect the updated "contract"
between callers and implementations of ec_method_st.mul.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
The function CMS_RecipientInfo_set0_pkey() is a "set0" and therefore
memory management passes to OpenSSL. If the same function is called again
then we should ensure that any previous value that was set is freed first
before we set it again.
Fixes#5052
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6142)
When the input length is zero, just return zero early. Otherwise,
there's a small chance that memory allocation is engaged, fails and
returns -1, which is a bit confusing when nothing should be written.
Fixes#4782#4827
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6175)
Stop redefining structures that are already defined in system
headers. This also means we can stop setting the pointer size
globally, because the system structures will have the correct pointer
sizes either way. The only exception is passing the right pointer
size to a function.
Stop trying to twist things around with rand(), that's the job of the
DRBG that we feed.
Stop assuming the location of the JPI$_FINALEXC item, look it up
instead.
Signal an exception if the sys$getjpiw call fails (it means the item
list isn't set up right, so works as an assertion, but using VMS
methodology).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6151)
Calculating BN_mod_inverse where n is 1 (or -1) doesn't make sense. We
should return an error in that case. Instead we were returning a valid
result with value 0.
Fixes#6004
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6119)
No need to buildtest on opensslconf.h
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6149)
Montgomery multiplication post-conditions in some of code paths were
formally non-constant time. Cache access pattern was result-neutral,
but a little bit asymmetric, which might have produced a signal [if
processor reordered load and stores at run-time].
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6141)
which is used for ASN1_STRING_print_ex*() and X509_NAME_print_ex*().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6105)
rand_pool_bytes_needed() was constructed in such a way that the
smallest acceptable entropy factor was 1 entropy bits per 8 bits of
data. At the same time, we have a DRBG_MINMAX_FACTOR that allows
weaker source, as small as 1 bit of entropy per 128 bits of data.
The conclusion is that rand_pool_bytes_needed() needs to change to
support weaker entropy sources. We therefore change the input of
entropy per byte to be an entropy factor instead. This entropy factor
expresses how many bits of data it takes (on average) to get 1 bit of
entropy.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6150)
