The old numbers where all generated for an 80 bit security level. But
the number should depend on security level you want to reach. For bigger
primes we want a higher security level and so need to do more tests.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #6075Fixes: #6012
In some circumstances it is possible for a client to have a session
reporting a max early data value that is greater than the server will
support. In such cases the client could encounter an aborted connection.
Fixes#6735
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6740)
These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
Change the description for BN_hex2bn() so that it uses the same BIGNUM argument name as its prototype.
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6712)
Also fix some L<> labels and =item entries found while doing this.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6630)
This also adds the ability to control this through s_server
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
Document SSL_OP_NO_ANTI_REPLAY and SSL_CTX_set_allow_early_data_cb()
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6469)
This allows operation inside a chroot environment without having the
random device present.
A new call, RAND_keep_random_devices_open(), has been introduced that can
be used to control file descriptor use by the random seed sources. Some
seed sources maintain open file descriptors by default, which allows
such sources to operate in a chroot(2) jail without the associated device
nodes being available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6432)
We don't want an indentation step inside a 'extern "C" {' .. '}'
block. Apparently, cc-mode has a c-offsets-alist keyword to allow
exactly this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6557)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6227)
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6514)
The man name didn't match the file name, and some places had
'password' instead of 'pass phrase'.
Fixes#6474
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6476)
EVP_PKEY_asn1_set_get_priv_key() and EVP_PKEY_asn1_set_get_pub_key()
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6394)
EVP_PKEY_get_raw_private_key() and EVP_PKEY_get_raw_public_key()
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6394)
After some discussion, it was concluded that the better idea is to
stipulate that the pass phrases passed to the OSSL_STORE API are
expected to be UTF-8 encoded, and that all objects made accessible
through OSSL_STORE URIs should adhere to this expectation (at the
discretion of the loaders).
Email ref:
https://mta.openssl.org/pipermail/openssl-project/2018-June/000771.html
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6416)
ECDSA_SIG_new() returns NULL on error.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6398)
Goal is to exercise AEAD ciphers in TLS-like sequence, i.e. 13-byte
AAD followed by payload. Update doc/man1/speed.pod accordingly.
[While we are at it, address even some styling and readability issues.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6311)
OpenSSL 1.1.0 made the X509_LOOKUP_METHOD structure opaque, so
applications that were previously able to define a custom lookup method
are not able to be ported.
This commit adds getters and setters for each of the current fields of
X509_LOOKUP_METHOD, along with getters and setters on several associated
opaque types (such as X509_LOOKUP and X509_OBJECT).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6152)
Also, modernize the code, so that it isn't trying to store a size_t
into an int, and then check the int's sign. :/
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6271)
In previous versions of OpenSSL, the documentation for PEM_read_*
said:
The callback B<must> return the number of characters in the
passphrase or 0 if an error occurred.
But since c82c346226, 0 is now treated as a non-error
return value. Applications that want to indicate an error need to
return -1 instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6271)
When signing or verifying a file using pkeyutl the input is supposed to
be a hash. Some algorithms sanity check the length of the input, while
others don't and silently truncate. To avoid accidents we check that the
length of the input looks sane.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
Only check the CN against DNS name contraints if the
`X509_CHECK_FLAG_NEVER_CHECK_SUBJECT` flag is not set, and either the
certificate has no DNS subject alternative names or the
`X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT` flag is set.
Add pertinent documentation, and touch up some stale text about
name checks and DANE.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Using the ca application to sign certificates with EdDSA failed because it
is not possible to set the digest to "null". This adds the capability and
updates the documentation accordingly.
Fixes#6201
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6286)
Also allows the apps to set it.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5227)
Don't call the decrypt ticket callback if we've already encountered a
fatal error. Do call it if we have an empty ticket present.
Change the return code to have 5 distinct returns codes and separate it
from the input status value.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6198)
* EC_POINT_mul is now responsible for constant time point multiplication
(for single fixed or variable point multiplication, when the scalar is
in the range [0,group_order), so we need to strip the nonce padding
from ECDSA.
* Entry added to CHANGES
* Updated EC_POINT_mul documentation
- Integrate existing EC_POINT_mul and EC_POINTs_mul entries in the
manpage to reflect the shift in constant-time expectations when
performing a single fixed or variable point multiplication;
- Add documentation to ec_method_st to reflect the updated "contract"
between callers and implementations of ec_method_st.mul.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
Make it clear that you should not attempt to get the version before the
first handshake is complete.
Fixes#2893
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6013)
Note that calling the *use_certificate* functions will replace any existing
certificate of the same type. The same thing applies for private keys.
Fixes#2147
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6092)
This option shows the certificates as sent by the server. It is not the
full verified chain.
Fixes#4933
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6067)
Document the fact that if a session is not closed down cleanly then the
session gets removed from the cache and marked as non-resumable.
Fixes#4720
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6053)
In 1.0.2 you could configure automatic ecdh params by using the
ECDHParameters config directive and setting it to the value
"+Automatic" or just "Automatic". This is no longer required in 1.1.0+
but we still recognise the "+Automatic" keyword for backwards compatibility.
However we did not recognise just "Automatic" without the leading "+" which
is equally valid. This commit fixes that omission.
Fixes#4113
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6035)
Actual behavior of DEFAULT is different than currently described.
Rather than actinf as cipher string, DEFAULT cannot be combined using
logical operators, etc.
Fixes#5420.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5428)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5801)
Similar to 0652e8a7 ("Clarify default section in config.pod",
2018-04-12), reword a sentence to make it easier to parse.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5794)
Fixes#5961
This reverts commit 3c5a61dd0f.
The macros OPENSSL_MAKE_VERSION() and OPENSSL_VERSION_AT_LEAST() contain
errors and don't work as designed. Apart from that, their introduction
should be held back until a decision has been mad about the future
versioning scheme.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5968)
The scrypt and RSA-PSS documents were a mixture of section 3 and
section 7 material. With pre-1.1.1 OpenSSL, this is understandable,
since we had a different directory layout. With 1.1.1, we've moved to
the typical man-page directory layout, and the documents need to be
updated accordingly.
Also, the scrypt document contained a description of
EVP_PKEY_CTX_set1_pbe_pass(), which is a generic function rather than
an scrypt specific function, and therefore should be documented
separately.
Fixes#5802
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5942)
The documentation erroneously stated that one can change the default
configuration file name.
Fixes#5939
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5941)
This is a minor update which hopefully makes these particular lines
read a little easier.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5938)
The EVP_MD_CTX_cleanup() function was merged into EVP_MD_CTX_reset()
which is called by EVP_MD_CTX_free(). Adjust the documentation to say
that the latter should be used to avoid leaking memory.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5921)
- added some explaining text to a sentence that lost its context.
- removed mention of per-ssl drbg
- fix whitespace errors
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5804)
Remove duplicate declaration of `EVP_CIPHER_key_length` in the synopsis.
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5792)
The RAND_DRBG API was added in PR #5462 and modified by PR #5547.
This commit adds the corresponding documention.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5461)
Add BIO_get_conn_ip_family and BIO_set_conn_ip_family macros to
util/private.num and document them in BIO_s_connect.pod.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5007)
The BIO was refactored in 417be660e1,
but the manual wasn't fully updated to reflect some of the changes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5007)
When the "certificate purpose" is checked and KeyUsage extension is present,
either 'digitalSignature' or 'nonRepudiation' is accepted.
Manual page corrected to reflect the above.
Signed-off-by: Konstantin Shemyak <konstantin@shemyak.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5727)
Apparently applications rely on RAND_load_file's ability to work with
non-regular files, customarily with /dev/urandom, so that the ban was
not exactly appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5737)
In particular, x and y may be NULL, as used in ecdsa_ossl.c. Make use of
this in ecdh_ossl.c as well, to save an otherwise unnecessary temporary.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5532)
The comment in EVP_DigestInit.pod is:
> Returns the NID of the public key signing algorithm associated with this
digest. For example EVP_sha1() is associated with RSA so this will return
B<NID_sha1WithRSAEncryption>. Since digests and signature algorithms are no
longer linked this function is only retained for compatibility reasons.
I.e. there is no link anymore.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5682)
When SSL_CTX is created preinitialize it with system default
configuration from system_default section.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4848)
Since the public and private DRBG are per thread we don't need one
per ssl object anymore. It could also try to get entropy from a DRBG
that's really from an other thread because the SSL object moved to an
other thread.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5547)
Don't pass a pointer to uninitialized processed value
for BIO_CB_READ and BIO_CB_WRITE
Check the correct cmd code in BIO_callback_ctrl
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5516)
It is quite likely for there to be multiple certificates with empty
subjects, which are still distinct because of subjectAltName. Therefore
we allow multiple certificates with an empty Subject even if
unique_subject is set to yes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5444)
Renamed to EVP_PKEY_new_raw_private_key()/EVP_new_raw_public_key() as per
feedback.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Include more information about how to create keys for these algorithms.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
Also adds some documentation for related existing functions/macros
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5520)
These functions are similar to SSL_CTX_set_cookie_{generate,verify}_cb,
but used for the application-controlled portion of TLS1.3 stateless
handshake cookies rather than entire DTLSv1 cookies.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5463)
Adds application data into the encrypted session ticket
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3802)
X509_STORE_set_verify_cb_func.pod has documentation for various callbacks
and function pointers that can be set and retrieved, but neither it nor
X509_STORE_new has much documentation for the actual purpose and usage
of X509_STORE objects. Remedy this disparity with new documentation
for adding certificates and CRLs, expected usage, and for modifying
the default verifification behavior.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3958)
Remove a space from a whitespace-only line.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5575)
Add functions that will do the work of assigning certificate, privatekey
and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the
publickey. This will permit the keys to pass validation for both ECDSA
and RSA. If a private key has already been set for the certificate, it
is discarded. A real private key can be set later.
This is an all-or-nothing setting of these parameters. Unlike the
SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions,
the existing cert or privatekey is not modified (i.e. parameters copied).
This permits the existing cert/privatekey to be replaced.
It replaces the sequence of:
* SSL_use_certificate()
* SSL_use_privatekey()
* SSL_set1_chain()
And may actually be faster, as multiple checks are consolidated.
The private key can be NULL, if so an ENGINE module needs to contain the
actual private key that is to be used.
Note that ECDH (using the certificate's ECDSA key) ciphers do not work
without the private key being present, based on how the private key is
used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/1130)
With "-multi" the OCSP responder forks multiple child processes,
and respawns them as needed. This can be used as a long-running
service, not just a demo program. Therefore the index file is
automatically re-read when changed. The responder also now optionally
times out client requests.
Reviewed-by: Matt Caswell <matt@openssl.org>
Either files or directories of *.cnf or *.conf files
can be included.
Recursive inclusion of directories is not supported.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5351)
CLA: trivial
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/5458)
When early data support was first added, this seemed like a good
idea, as it would allow applications to just add SSL_read_early_data()
calls as needed and have things "Just Work". However, for applications
that do not use TLS 1.3 early data, there is a negative side effect.
Having a nonzero max_early_data in a SSL_CTX (and thus, SSL objects
derived from it) means that when generating a session ticket,
tls_construct_stoc_early_data() will indicate to the client that
the server supports early data. This is true, in that the implementation
of TLS 1.3 (i.e., OpenSSL) does support early data, but does not
necessarily indicate that the server application supports early data,
when the default value is nonzero. In this case a well-intentioned
client would send early data along with its resumption attempt, which
would then be ignored by the server application, a waste of network
bandwidth.
Since, in order to successfully use TLS 1.3 early data, the application
must introduce calls to SSL_read_early_data(), it is not much additional
burden to require that the application also calls
SSL_{CTX_,}set_max_early_data() in order to enable the feature; doing
so closes this scenario where early data packets would be sent on
the wire but ignored.
Update SSL_read_early_data.pod accordingly, and make s_server and
our test programs into applications that are compliant with the new
requirements on applications that use early data.
Fixes#4725
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5483)
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5473)
This commit adds SSL_export_keying_material_early() which exports
keying material using early exporter master secret.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5252)
CLA: trivial
fix typo:
EC_point2buf => EC_POINT_point2buf
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5367)
Add -bind option to s_client application to allow specification of
local address for connection.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5272)
